Database Info

My i-teq X-bond is Dead

Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran

s_m_s said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran
Click to expand...
Click to collapse
you can press start + ok + reset. it will help you recover your pda

salam
salam agha mohsen man ham moshkele shoma ro daram agar dorostesh kardin man ro ham khabar konid. 09195388556
ghorboone dastet

please help me out
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks

SKYWOR said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
Click to expand...
Click to collapse
wait we need more Details id you try leaving the phone charging then take battry out and put it back in? also does the Device power on? I mean do you see the qtex screen you know the boot screen? also try putting it in bootloader mode then flash

Same Problem
I have been facing the same kind of problem. The phone light flashes when charging and when I boot the phone, it just shows the iteq logo. I have tried the Call Start+Call end+power combination but nothing happens. Sometime it shows the orange light besides the power button but the logo still remains on the screen. On one ocassion, it did enter some image mode but gave an error that no image found. I dont have the rom either to flash it. Can someone please post the rom online if they have it and also help if they have faced similar issues.

Iteq X-bond
try
Windows flag button (Start)+OK+reset
if it doesn't work then install new windows

reseting
1 press and hold the [WIndosFlag(start)] and [ok] buttons somultaneously
2 press and release the [reset] button
3 wait up to the leds in the keyboar flahsing 2 or 3 time (less tha 5 seconds)
4 release the [WIndosFlag(start)] and [ok] buttons
must be start the resetting to the fabrique settings
[WIndosFlag(start)] button is in the down left corner
[ok] button is in the down right corner
if this not works the the keypad is dammage

iteq x-bond totally drained battery
When the battery is totally drained, all you have to do is charge it. Now here is the tip. when you charge it(totally drained iteq x-bond battery), the phone will enter into pre-charge mode for about 30min to 2 hrs( depending on how drained the battery is), the end-call button together with the right double arrow button will light steadily. Do not on the unit as this will only aggrevate the problem. Wait until the phone passes through that pre-charge mode. When the end-call button starts to flash, that means the pre-charge period is over. You can now press and hold the on/off button for about 5 seconds and the phone will start-up normally. Your problem is solved. That's it. This procedure will work only on the presumption that you did not do anything on the phone beforehand such as upgrading etc....

My phone does not Boot, Help!!!

Hi,
my Imate JAMA (P30) doesn't boot, it reamins stuck up at the imate screen and then screen goes blank and nothing happens even if i press any key it appears to be off and turn back on only if i remove and reinsert the battery.
i've tried hard reset by pressing the Volume(-) and the Red hang up button but in vain.
even when i connect USB cable to my device, it is not deteced by my PC nor by AciveSync.
what should i do?
Please Help !!!

ravisharma said:
Hi,
my Imate JAMA (P30) doesn't boot, it reamins stuck up at the imate screen and then screen goes blank and nothing happens even if i press any key it appears to be off and turn back on only if i remove and reinsert the battery.
i've tried hard reset by pressing the Volume(-) and the Red hang up button but in vain.
even when i connect USB cable to my device, it is not deteced by my PC nor by AciveSync.
what should i do?
Please Help !!!
Click to expand...
Click to collapse
welcome to the forum
Please READ the Wiki, you`ll find a lot of usefull information

i'm new here, please explain I din't get wht do u mean by "Please READ the Wiki"...

http://wiki.xda-developers.com/

Your battery may be dying. Try a new one.

Naa, I've charged the battery still the same problem

whats the status. i have the sme prob. what can i do now??

i've killed my magican in a very way(

Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?

pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks

do u able to start bootloader (POWER +CAMERA hold and press reset)

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped

i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.

happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz

[Q] SGR won't boot after ICS update

Few days ago I updated to ICS. Here are the steps that I followed:
1. Downloaded the ROM and entered the DM mode in SGR
2. Using ODIN I updated the OS to ICS
I am not/was not very knowledgeable about other steps that needed to be done. Everything went well (at least it look to be the case then), but noticed that when on Wi-Fi and using the facebook app, my phone often freezes up. A force re-start use to solve the problem. However today, the phone didn't reboot after a force closure.
I have tried going to the recovery mode. I get the android logo but it shuts down soon after that.
I was hoping to enter the download mode and install another version of OS but the phone doesn't go to the download mode. Couple of time it went to something called "Safe Mode" but the screen was unresponsive. Also I think the de-bug node might not be checked on in my phone
And now finally it is showing something called "encryption failed error" and asks me to do a "reset settings". When i click that nothing happens and the screen goes blank.
My phone is still under warranty. Not sure if installing ICS would have made it void. Any suggestion as to what can be done to get out of this mess will be much appreciated.
Thanks.

Do you sure?
You can't go to DM and Recovery?
Impossible...
Perhaps some hardware problem happend!
Sent from my WT19i using Tapatalk 2

saeed74 said:
Do you sure?
You can't go to DM and Recovery?
Impossible...
Perhaps some hardware problem happend!
Sent from my WT19i using Tapatalk 2
Click to expand...
Click to collapse
Not sure what could cause it but I am pressing the power key + Volume up+ Home key to enter the recovery mode..I get the Android symbol with the with the rotating structure, but after 5 seconds the screen goes blank
To enter the DM mode, I press the Power Key + Home + Volume Down key and I get the Samsung splash logo and then a message which says "Encryption Failed" Unable to complete encryption because of interruption.Perform factory data reset (earsing all your data before use). After resetting, try encrypting device again.
then there is a button to reset device. When I press that nothing happens.

srikant1983 said:
Not sure what could cause it but I am pressing the power key + Volume up+ Home key to enter the recovery mode..I get the Android symbol with the with the rotating structure, but after 5 seconds the screen goes blank
To enter the DM mode, I press the Power Key + Home + Volume Down key and I get the Samsung splash logo and then a message which says "Encryption Failed" Unable to complete encryption because of interruption.Perform factory data reset (earsing all your data before use). After resetting, try encrypting device again.
then there is a button to reset device. When I press that nothing happens.
Click to expand...
Click to collapse
1. Is your phone able to boot ?? If nt then they cant check what r u running...
2. Is ur dwnload counter more than 0 ?? If yes then it mite b a prob..
These are some steps dat any ssc do..
Also ur fone is under warranty, then visit ssc n say dat it happend durin updatin via kies...
Also ics for sgr is nw officially out..so dat wont void d warranty...!!
Sent from my i9103 using CM10 alpha

vipul12389mehta said:
1. Is your phone able to boot ?? If nt then they cant check what r u running...
2. Is ur dwnload counter more than 0 ?? If yes then it mite b a prob..
These are some steps dat any ssc do..
Also ur fone is under warranty, then visit ssc n say dat it happend durin updatin via kies...
Also ics for sgr is nw officially out..so dat wont void d warranty...!!
Sent from my i9103 using CM10 alpha
Click to expand...
Click to collapse
Thanks for the suggestion.
I can't make the phone to boot. Not sure if the SSC guy would be able to.
Is there a way to check the download counter given that I am not able to boot?

If the phone absolutely won't power on then the SSC will replace your motherboard without any questions asked..
From my CM10 powered galaxy R

vbz89 said:
If the phone absolutely won't power on then the SSC will replace your motherboard without any questions asked..
From my CM10 powered galaxy R
Click to expand...
Click to collapse
Took them a week but that's what they did. And I am happy that it was still under warranty

I have very Bad Problem !!!! plz help me

I Have a GT-I9001 S Plus and I had a security lock on it , Some of my friends entered the wrong password and my phone show me a too many lock pattern !!! iknow this Error and iknow ways to fix this problem (1.Factory reset 2.Flash my phone ) but when i ganna go to recovery menu and press the Up (volume) + home + power get Ram Dump Message and when i press just Up(volume) + power and I see the Samsung logo and after a few seconds i see android box ,After a few seconds my mobile is reboot and boot normaly , when i try to flashing with odin progrm all step is pass , and my phone be restart but when again see a android box with progress bar again reboot normaly . and No changes will occur. what sholud i do ?? plz help me .
ITRY TO RECOVERY MENU AND SEE A MANY TAPIC AND TRY EVRY WAY I VERY TIERD

taromarka2 said:
I Have a GT-I9001 S Plus and I had a security lock on it , Some of my friends entered the wrong password and my phone show me a too many lock pattern !!! iknow this Error and iknow ways to fix this problem (1.Factory reset 2.Flash my phone ) but when i ganna go to recovery menu and press the Up (volume) + home + power get Ram Dump Message and when i press just Up(volume) + power and I see the Samsung logo and after a few seconds i see android box ,After a few seconds my mobile is reboot and boot normaly , when i try to flashing with odin progrm all step is pass , and my phone be restart but when again see a android box with progress bar again reboot normaly . and No changes will occur. what sholud i do ?? plz help me .
ITRY TO RECOVERY MENU AND SEE A MANY TAPIC AND TRY EVRY WAY I VERY TIERD
Click to expand...
Click to collapse
Did you back up your phone before you started flashing?

Moved to General Q&A.

my data is not Important
poweredbymugen said:
Did you back up your phone before you started flashing?
Click to expand...
Click to collapse
No, I didnt , my informaiton in my phone is not Important , I cant flashing and factory reset ,