Hi,
I accidentally replaced my nleddrvr.dll file without backing it up.
Could anyone send me the file or post it here for the WM 6.1 ROM
The original size was 14632 bytes.
Thanks a lot.
I would, but .dll are almost impossible to copy or move from the /windows directory. Your best best would be to do a hard reset, which erases everything off the device & goes back to stock condition
Actually you can extract dll files from \windows directory using ROMextractor utility in this thread 1571715 posted here. I've done it in WM 6.1
used ROMExtractor to get it. Was 14k before extraction, 16k after. Dont know if itll work, good luck.
Thanks a lot.
For any future references. Looks like replacing the dll file did not help. LED was still non-functional. I got around this problem by doing a full system backup using Sprite backup with the exclusion of the corrupted dll. Hard reset the phone and restored my data from backup.
We can't copy .dll from \Windows directory, not until you have unlock the security configuration.
Find a installer called security powertoy, install it on your window, run it, connect your phone with activesync and set the security to Security Off.
That will unlock your permission to copy dll from \Windows folder.
Related
Finally managed to flash my mda with a bigstorage rom
All is good but I got a slight prob with something else. Although I hated the customisation of T-Mobile, I found it helpful that the phone automatically installs all the progs and settings in the extended ROM after a hard reset.
With BigStorage, I presuming that the Extended Rom folder is amalgamated with the Storage folder. Do you guys know whether it is possible to add the Cab files (e.g. intellidialer, etc...) to the Storage folder (as it was in ExtRom) so that it automatically installs the progs and customization options after a hard reset?
Or do you recommend going back to a traditional Extended Rom inclusive ROM and edit the Extended Rom there? I understand that ROMKitchen cannot be used on Mini's so do you happen to have any other program recommendations?
If the above two isn't possible yet, is there anyway of preventing the mda from deleting the Cab files after I install from them. For instance, when I install Intellipad, the cab file is automatically deleted. I had hoped that I may use this cab file again by dumping it in the "Storage" folder and using it if I need to hard reset the damn thing again
Thanks again
Hi rockykabir
sorry first for my english... I will try to explain my solution:
1. I have made a backup of all the Extended_ROM files to my PC (open in explorer loadvdisk.exe and copy through activesync.)
2. Made the Bigstorage and the Radio-Update (thanks a lot guys for the help that I have found in this forum.)
3. Made a small CAB-File which has to start first (see atached file)
4. If this file is installed, you can create a hidden and read-only folder on the SD-Card named: 2577 (Foldername is important)
5. Place inside this folder: autorun.exe and install.m2w and make the changes in the instal.m2w file. Think its easy.
6. Place all the recent CAB-Files into this Folder.
7. Make changes as you need
Make sure, that the folder and the files on the SD-Card are read-only and the folder should be hidden (not sure about that). If not, the Cabinet files will be deleted after installation.
How do I work now with this SD-Card? Easy... After a Hardreset, place the card into your MDA. Start Ext_Start.cab.
Put out the SD-Card and put it in again..... Enjoy.
Now i search only for an easy solution to make a small Extended_ROM for the Ext_Start.cab and the IIWPO. That task will be the next...
Enjoy the day
Thanks sooo much mate!!! - thats very kind of you as this completely solves my prob. I hope this is of use to others as well
the last post tells you the detail
THANX
buzz
Thanks for reply.
Hope for good news
Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks
you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software
The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem
OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.
it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Do you mean that you can choose the Chinese region now?
Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached
buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...
only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.
expecting a perfect WM2K5_160C supproting Simple Chinese.
mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.
WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz
The file I'm trying to copy is ezinput.dll. Specifically, the version from my new Sprint Diamond Touch Pro.
I never had any problems copying files from ROM, but this one resists.
I tried using 1) Explorer via Activesync, 2) Resco Explorer (error: Cannot copy, Invalid parameter), 3) Total Commander (Cannot copy), 4) zipping the file (result is a 0 byte file), and stopping all the related services but results are the same.
Thinking that the dll is locked because it is loaded, I renamed all references of this file in the registry, reset, no joy.
Using Memmaid, I see that Services spawns many threads, and some of the et9 related dlls are started by it. Is this why I can't copy the file? If so, how do I keep Services from starting the .dlls?
The big questions are 1) Why can't I copy? and 2) How do I copy a file that resists copying?
Thanks.
question here is why do you want to copy the file, well i would like to know why lol
Have you got a rom update for the diamond rom you could extract the file from that, maybe it is protected ,which is why it cant be copied. Have you tried clicking copy in resco then just paste a copy back into the windows directory it will just rename it copy of ezinput.dll ,then maybe you will be able to copy that copy of the file?
Yes, I can extract the ROM (no update as far as I know) if I needed to, but I'm trying to avoid that.
I want to copy that file because the Touch Pro has slightly variations in its soft keybard that I would like to use.
I asked one of my developers, and he explains that the file is opened as "exclusive". I need to find a way to keep that file from running on startup. It's not running as a service, it's not in the startup, it's a registered .dll that is being called by another process.
Does WM6.x have a .dll cache?
There must be a way to copy this file... Help?
use total commander; works for me
zeezee said:
use total commander; works for me
Click to expand...
Click to collapse
As I indicated in the original post, TC did not work. If you have a Diamond/Touch Pro/WM6.x w/ HTC's soft-keyboard, I would like you to try to use TC to copy windows/ezinput.dll to another location. My guess is that it will NOT work.
snovvman said:
As I indicated in the original post, TC did not work. If you have a Diamond/Touch Pro/WM6.x w/ HTC's soft-keyboard, I would like you to try to use TC to copy windows/ezinput.dll to another location. My guess is that it will NOT work.
Click to expand...
Click to collapse
ohh...i didnt read carefully enough, sorry.
Might be a way to see content of the flashdisk on the PC while in the erm...tricolor screen (i cant believe i dont remember the term at the moment x.x) - but then again, probably not.
Hi
I made the silly mistake of not backing up my contacts before updating ROM ( i know... very stupid)
I copied the entire device to computer prior to updating but for some reason, it didnt copy the windows folder from the PDA.
I'm guessing the contacts would have been stored somewhere in the windows folder. I was running WM6.
Have i lost the contacts...? or are they stored in a different location which would have been backed up ?
Thanks
what exactly did you copy?
the following directories and files
Application data
ConnMgr (empty)
Documents and Settings (empty)
Music
My Documents
Program Files
Pim.vol
WMPinfo
Thanks
as far as i know, if i am not wrong, the pim.vol is the one that contain your pim data especially contacts,.
but, you cant just changed it, or replace it, if i am not wrong you need to use mortscript to do that with force deleting the original one and replacing with the new one,.
i will try to look into it, just keep all your data that you have backed up,.
Thank you !
I really appreciate it.
Not yet solved
Note to admin
this topic has not yet been resolved. I simply said thank you to -G- for saying he will look into it.
Thanks
tag removed
yup... pim.vol can't just be copied inside the root to be read.. it is somehow attached to your system.
BUT, if i'm not mistaken, you can use PIM Backup to load the info from the file.
try it.
http://forum.xda-developers.com/showthread.php?t=299705
btw.. i think SPB Backup can read pim.vol as well.
heyy
nope didnt work. i tried both PIM Backup and SPB Backup but neither of them accept the pim.vol as a valid file to restore from.
Actually, you should be able to just do a copy and paste of this file wherever you got it from. Try to use File Explorer (might not work). The option that works best for me with System locked files is via ActiveSync. If it doesn't work, try soft resetting and replace the file right away before the system gets a chance to access the file. Give it a shot, it might just solve your problem.
Alternatively, read this. It pretty much says the same thing that has been said so far...
http://frommypocket.pocketprimer.com/2007/09/29/backing-up-and-deleting-pim-data-wm50-only.aspx
Good luck to you
strange. i'll get back to you on this..
Im confused.
so will it work to just replace the pim file like egzthunder1 suggested ? Or is that going to mess up contacts completely ?
Go there.. use the emulator.. and get your contacts back.
http://forum.xda-developers.com/showthread.php?t=309351
also, please DO try to just put the pim.vol file in your root dir of your device to see if it's movable.. so other people could use that info.
If someone installs a cab that overwrites a system dll but makes a copy of the dll somewhere to restore when the time comes to uninstall that application, where would I find that copy? I am having a heck of a time trying to copy a stock dll from my phone. I can overwrite the dll when I install the app and when I uninstall it the old one is back. the stock one is 14k and the other is 20k. they are different files altogether. I thought maybe if I could get at the file while it was stored away in the cab manager then I could retrieve the file and life could go on. I can't just copy the file with activesync - it says access denied. I try to copy it with total commander on the device and that does not work. I even wrote a mortscript to copy the file and that did not work either. I think it is because the file is in use - it's the file that controls the data connection. I tried shutting off the data connection but still cannot get to it. can anyone offer any tips?
another Idea might be to include mortscript as an OEM and then execute the script that copies the file during autorun right after the rom is flashed?
thanks all.
edit: same result when trying to copy the dll from a stock sprint, touch pro, custom rom sprint tp, or custom rom verizon tp