Related
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
squiros1976 said:
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
Click to expand...
Click to collapse
Do entering bootloader : http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#bootloader (With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Already tried that...
erwinpiero said:
Do entering bootloader :
(With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Click to expand...
Click to collapse
That´s exactly why i ended with the phone stuck at the first time... i recently got this phone and i wanted to see the bootloader version and stuff to do a firmware update but now it´s just there all the time. Not even being recognized by the pc.
Thanks.
Had You try flash via SD Card?
erwinpiero said:
Had You try flash via SD Card?
Click to expand...
Click to collapse
Well, no, i don´t have an sd card available now... one thing i forgot to say is the phone, after it is on that screen, never turns off again unless you remove the battery... and yes, i have left it on for a day, same thing...
What is the procedure to do the sd card flash thing? it that needs to get to the tree-color screen forget it... that´s exactly what the phone doesn´t do...
Thanks.
Sergio.
Hello Sir, to flash using SD card, you can read it here http://forum.xda-developers.com/showthread.php?t=448008 see number 5.
HTC Fuze
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
nessab04 said:
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
Click to expand...
Click to collapse
Hi,
Interesting... i´m not the only one with that problem then.... code doesn´t do anything... still same screen....
...no bootloader...
erwinpiero said:
Hello Sir, to flash using SD card, you can read it here --- see number 5.
Click to expand...
Click to collapse
Hello,
Ok, well, the main problem here is that i can´t get into bootloader... the phone is stuck at the fist "Touch pro" screen and nothing else happens...
Anyone with a clue on this? is this phone bricked then...
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Finally got bootloader...
the-wrangler said:
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Click to expand...
Click to collapse
Finally, after several tries it got into bootloader... now the thing doesn't end here because for some reason when i try to upload the Raphael Hard_SPL the phone goes ok to 0% and in about a minute a communication error appears and that's it...
We are moving forward... at least.
Bootloader Info.
Tried to flash via microSD but the phone says not allow..i guess that's because the hard SPL is not installed and it has the stock... here's what the bootloader shows, i'm not being able to install olinex hardSPL...
RAPH100
SPL-1.94.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
PCBID 0x80
RID 0x0
ideas?
...no way to flash it back....
so... i guess there´s no way to get this back into business... when trying to flash always reports communication error at 0%...
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
ya i just noticed the RAPH100 in his info he posted and the t7272 in the header..mines a RAPH800 and bootloader HAS to have vol + power..anyway, i remember having an issue with something similar with my old vogue..have you tried flashing the shipped stock rom back on? if not, try flashing the stock back on it and if it goes, then try the unlock afterwards. dont fret bud, someone here will get you sorted out
here, i found this as im not well versed in raph100s. its a chart with raph100 roms. im sure some must be shipped stock roms and may be worth a try. sorry i couldnt help more, like i said hopefully someone who knows your device better may be able to help
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
How about flashing official ROM via microSD card?
patrick_spd4u said:
How about flashing official ROM via microSD card?
Click to expand...
Click to collapse
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
No way to flash HardSPL...
Hello, thank you for your help! in fact the volume down+reset works perfect to get into bootloader but every time i try to flash hardSPL or stock rom via USB it says "communication error" and the phone displays a 0% bar...
Windows7 is detecting it as HTC USB Sync.
Thanks..
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
...will try it again...
Hi
In fact the most close to the rom i had on that cell is ruu_signed_1.90.401.1_wwe, downloaded it and will try it again later using sdcard... one thing i wonder is the SPL version which is 1.94.00.00 on my phone.
Sergio.
freakzone said:
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
Click to expand...
Click to collapse
Ok, so this is all I can get from my HTC Magic 32A.
It doesn't matter what key combination I press, it is always the same.
So I would like to know is there anyway to fix it?
I tried all known solutions, like applying recovery from sdcard, adb etc.
nothing is possible, because phone is not entering fastboot nor recovery.
But it keeps turning on so there MUST be a solution.
Here is video of what I get when I try to turn it on.
youtube.com/watch?v=TBciNMhoAs8
one more thing that I get is blue led when i press trackball and power button. but no screen turning on...
You haven't told us what you did before getting this...
OK...I got this when tried to upgrade radio and spl...
from then till now i got only this screen...
What have you done?
Have you flashed the radio BEFORE the SPL? Any errors?
BTW that image could be the RUU screen (not sure as I have never updated my phone in that way)
Well don't know what was the 1st thing done, cause my friend did it, and i am trying to fix it. he was trying to upgrade radio to 6.35 and spl to 1.76
so any suggestions?
elegos said:
What have you done?
Have you flashed the radio BEFORE the SPL? Any errors?
BTW that image could be the RUU screen (not sure as I have never updated my phone in that way)
Click to expand...
Click to collapse
Isnt the RUU screen because thats similar to the fastboot one.
So what is this screen?
Any chance to boot up again?
going back to the blue LED when you press trackball, that is the radio bootloader, so ive been told.
yes i know that, but there is no chance to do anything with usb cable.
maybe only with some serial cable an disassembling (opening phone to the parts). and I don't know how to do it, don't have serial cable....etc...
Anybody, anything?
ok...so i took my htc magic to service, and they told me that they'll try to flash it from linux and reprogramme evrything...
still waiting...
Me too,
Anybody have a new idea?
I upgrade radio 2_22_19_26I from recovery (RA Sapphire 1.6.2), then my phone can't access bootloader, recovery console....
Only HTC Magic logo display on screen always.
can you enter fast boot? (back and power buttons)
damjand said:
can you enter fast boot? (back and power buttons)
Click to expand...
Click to collapse
No, I can't enter fast boot, and recovery. HTC Magic logo always appear.
have you tried to flash recovery via adb?
or maybe you should try with goldcard...
Computer not recognize my phone, I can't do anything from computer (adb and fastboot).
What is goldcard? Can you show me?
Does any of you have the blue led??
damjand said:
ok...so i took my htc magic to service, and they told me that they'll try to flash it from linux and reprogramme evrything...
still waiting...
Click to expand...
Click to collapse
Do they were able to fix it?
i am still waiting for my phone...called today, it is still in que for fixing...
this is explanation for goldcard
http://forum.xda-developers.com/showthread.php?t=572683
i have blue led when i press trackball and power...
read somewhere it is kinda a radioloader!?
ronni.rasmussen said:
Does any of you have the blue led??
Click to expand...
Click to collapse
Yes, I press trackball and power button, the blue led is on.
I hope you have a solution.
I installed the latest RUU, 8.?????, and a few days later my screen is stuck on the white Hboot screen. The down button doesn't work, only the up button whenever I use the up button to scroll down to "power down" it does nothing. I hold the power button until the screen turns black, the screen restarts itself about 10 seconds later back to being stuck on the hboot screen. The hboot screen has the "tampered" banner accross the top as well. Any ideas on how to fix this or do I now have a 200.00 paper weight?
When in hboot, why don't you try to install 182 again?
dudeluv said:
When in hboot, why don't you try to install 182 again?
Click to expand...
Click to collapse
whenever I plug the phone into the laptop...it doesn't recognize the phone anymore...which is strange.
djfrost40 said:
whenever I plug the phone into the laptop...it doesn't recognize the phone anymore...which is strange.
Click to expand...
Click to collapse
Are you in hboot or fastboot?
You need to be in fastboot to get device recoginzed. It should say fastboot usb at the top of screen.
scrosler said:
Are you in hboot or fastboot?
You need to be in fastboot to get device recoginzed. It should say fastboot usb at the top of screen.
Click to expand...
Click to collapse
its in hboot highlighted in blue, it won't let me put it into fastboot.
have you got help? have you fix your problem yet? now i'm having the same problem.
I didn't connect to my computer too, computer can't get the driver automatically.
any help?
install htc sync from HTC. it should install the correct fastboot driver so the ruu can see it.
epic bumps is epic
hey i tried installing a new radio through cwm recovery but when it installed, i cant get into bootloader or the recovery, when i hold down the volume down buttton with power it just turns on and shows the htc magic boot screen
wat can i do to at least get into bootloader? i dont think its a brick because it boots right?
i posted this on htc magic forum but no one answered because its low activity, so ima try posting it here
fastboot?
Hi, on some phones with fast boot must have it unchecked to access bootloader?
andrix10 said:
hey i tried installing a new radio through cwm recovery but when it installed, i cant get into bootloader or the recovery, when i hold down the volume down buttton with power it just turns on and shows the htc magic boot screen
wat can i do to at least get into bootloader? i dont think its a brick because it boots right?
i posted this on htc magic forum but no one answered because its low activity, so ima try posting it here
Click to expand...
Click to collapse
I guess you have to press volume up button and power button..
Sent from my fingers to your face using xda premium.!
Power button on my HTC One S stopped working to I decided to fix it. I discharged the phone completely and opened the phone. I got to the switch and it fall apart from the motherboard so I soldered it in place. I dont know what could cause this, but now The phone doesnt want to boot. Its stuck on HTC logo with red warnings. Phone was running great on TrickDroid 9.1.0 before the discharge/opening. However Im able to enter bootloader. I can use fastboot usb ( I triend to flash different boot.img and recovery but it doesnt help. fastboot show flask OKAY but still, phone doesnt want to boot. When I choose recovery from hboot It will reboot into htc logo without warning, the status bar in the corner will pass 2 times and after 30sec it will just reboot into warning logo.
I have HBOOT 1.09.
Does anyone know what happend?
Discharging the phone is bad.This is a common issue, especially if youre using CWM.
If you are using CWM - change to TWRP.
Goatshocker said:
Discharging the phone is bad.This is a common issue, especially if youre using CWM.
If you are using CWM - change to TWRP.
Click to expand...
Click to collapse
Great advice cuz in my opinion 'TWRP' is way better interface but can you give him more detail and I'm sure in this case he would not mind being treated as a noob, I would but I'm not as good as you and Darknites lol :good:
I downloaded t-mobiles ruu and installed it in fastboot. everthing installed fine, updated radio and hboot. But still its looping on htc logo. hboot is 1.14 and is relocked. Any ideas?
krzysiek033 said:
I downloaded t-mobiles ruu and installed it in fastboot. everthing installed fine, updated radio and hboot. But still its looping on htc logo. hboot is 1.14 and is relocked. Any ideas?
Click to expand...
Click to collapse
Re check the power button, and are the touch keys blinking at anytime when you turn on the device?
ultraprimeomega said:
Re check the power button, and are the touch keys blinking at anytime when you turn on the device?
Click to expand...
Click to collapse
They blinking only if I hold the power button for few sec.
krzysiek033 said:
They blinking only if I hold the power button for few sec.
Click to expand...
Click to collapse
Its not good that its still looping after using a RUU but try factory reset or you can try just unlocking the bootloader and trying a custom rom.