I want to customize the slider and icons of the home screen tabs by myself (in Photoshop)?
Where are the images of these stored and what registry keys do I need to change (if any)?
Thanks
PS: I use JWMD for the start menu icons, is there a similar app for the home screen tab? - probably not
please guys, somebody help me with this.
i reformulated my request, i've been probably misunderstood - that would explain why nobody bothered to answer by now...
this is my last attempt to get your attention into this. I can't believe none of the people who know answered, is this such a big secret?
antaed said:
this is my last attempt to get your attention into this. I can't believe none of the people who know answered, is this such a big secret?
Click to expand...
Click to collapse
Hi Antaed.
I'm surprised too that no one has replied to your question.
I think the problem is not so much that it is a big secret, but that it is very complicated and therefore difficult to reply to.
I've done a bit of work on changing icons myself, so I can probably explain to you what is involved and what you have to do. But you will need to decide for yourself whether you want to put in the effort...
The slider icons (and the slider itself) are .png images stored in manila files. So the first thing you will need to do is find out, for your version of Manila, which files contain the slider icons for your version.
The best way to find out which files you need to change is to 'unzip' an existing cab which changes the slider icons on your version of manila and read the setup.xml file to extract the names of the manila files in the cab.
Please note that there are 3 files for each slider icon!
Then you will need to extract the .png files from the manila files. I use CFC GUI (available on this forum) to extract the .png files.
Once you have the original .png files, you will see that the slider icons do not take up the whole 128x128 pixels of the file but are placed approximately in the top left corner of the .png file. This will be your guide as to how big to make your new icons and where to place the new icon within the 128x128 matrix.
Please note that there are two different positions depending on whether the image you are replacing is the standard position in the row of icons or the icon visible 'within' the slider (seen as you move the slider along the row of icons), which is slightly higher and to the left.
Once you have created your new .png files in the same format as the originals, you should then use CFC GUI again to replace the original image with your new ones in the appropriate manila file.
You can then either manually move your new manila files across to your device (not recommended) or create a cab file to install them (and uninstall them) in one go (highly recommended!).
I would advise (from experience) only doing a couple of icons first until you have the exact position for the icon with the file. The position should then be the same for every icon.
The slider itself is fortunately only one file and therefore a lot easier to change. Again the best way to find out which manila file you need to change for your version is to unzip a cab file that changes the slider on your version and read the setup.xml file.
Hope this helps... (Well, at least you got an answer!)
And "No", I do not know of an easier way of doing this!
Johnkst, thanks for your kind reply, I started to have doubts I'll get an answer to this .
About the procedure - yes, it's pretty challenging but I'll try .
First because it's kind of a new adventure for me and then because I feel I owe it to you now, as I don't want to leave your effort in vain .
If I'll succeed (and I don't see why not) you'll be the first to receive my work.
Thanks again and best regards,
Antaed
Changing slider icons and the slider...
antaed said:
Johnkst, thanks for your kind reply, I started to have doubts I'll get an answer to this .
About the procedure - yes, it's pretty challenging but I'll try .
First because it's kind of a new adventure for me and then because I feel I owe it to you now, as I don't want to leave your effort in vain .
If I'll succeed (and I don't see why not) you'll be the first to receive my work.
Thanks again and best regards,
Antaed
Click to expand...
Click to collapse
That's the right attitude, Antaed...!
I don't know if it will help you, but I am attaching two cabs to this post. They are ones I made myself for my HD2, which uses Manila 2.5.1920. I THINK the same files are used for 1921, but I don't know for sure...
There might be some stuff in there that you do not need, but they might also be useful to help you identify the files you need to change.
One is for the clear slider on the main tabs (it also slightly changes the black '2nd level' slider), the other for the slider icons.
The slider icons it installs are those from Jaguaralani. Let me know once you have downloaded as I will remove them again. I know Jaguaralani does not want his/her theme split up and my posting a cab which installs only the slider icons probably goes against those wishes... - Done!
Good luck!
done, thanks.
Related
Hey everyone,
I just have a quick question, is it possible to extract the wait cursor from this CAB by Dafunk and put it in a CAB so I can install JUST the wait cursor rather than the whole taskbar?
Please say there is 'cos I love the cursor but I'm not a fan of the whole taskbar compared to the one of EnergyROM's xD
Thanks a lot in advance,
Luke.
EDIT!!!: Here are the results of what I did:
Well, like I said, I found a program that extracts the .CAB, so I did that, got the shellress.192.dll from the taskbar .CAB and then, painfully slowly, added each bitmap (16 in total) using reshacker to the original shellres.192.dll that came with the EnergyROM. (This means it will only work with EnergyROM's that aren't GTX or 6.5.X)
It works great! Here's the .dll (has to be .ZIP'd), can someone CAB it up please? I don't know what I'm doing with that.
Oh and a screenshot...
If someone with the original shellres .dll thing from stock 6.5 wants me to put that cursor (or any other for that matter) just gimme the things and I'll happily do it for you (my little in return to XDA)
If you extract the cab with a cab manager program, you just need to figure out what files hold the cursor and repackage the cab.
Check the registries to make sure they don't need to be extracted too.
Thanks for the quick reply.
Erm, I have a program called "WinCE CAB Manager" (30 day trial) and have looked at the files in the CAB and I can only see .BMP and .DLL files, and I would guess it would a .GIF file being as though it's animated?
I'm a little confused now as to what to do...?
Also, as you said there are REG keys there but I don't think they are relevant to what I'm looking for.
LukeTurner93 said:
Thanks for the quick reply.
Erm, I have a program called "WinCE CAB Manager" (30 day trial) and have looked at the files in the CAB and I can only see .BMP and .DLL files, and I would guess it would a .GIF file being as though it's animated?
I'm a little confused now as to what to do...?
Also, as you said there are REG keys there but I don't think they are relevant to what I'm looking for.
Click to expand...
Click to collapse
I extracted the cab as well, I do not think any registries are involved.
You'll have to do some research on which combimnation of .dll & .bmps make up the cursor.
Yes, I would assume a .gif as well, but didn't see one in there either.
Another option (I know you're looking for a specific one but....), you can find cursors packaged together with themes that won't overwrite your taskbar.
Sorry I do not have a clear cut answer for you.
You may want to ask one of our many modders out there like in Dusk's thread, or perhaps Maxcy...
Bruce Inman said:
I extracted the cab as well, I do not think any registries are involved.
You'll have to do some research on which combimnation of .dll & .bmps make up the cursor.
Yes, I would assume a .gif as well, but didn't see one in there either.
Another option (I know you're looking for a specific one but....), you can find cursors packaged together with themes that won't overwrite your taskbar.
Sorry I do not have a clear cut answer for you.
You may want to ask one of our many modders out there like in Dusk's thread, or perhaps Maxcy...
Click to expand...
Click to collapse
Well I just remembered seeing the cursor shown on the XDA front page (http://www.xda-developers.com/windows-mobile/bw-taskbar-icons-wait-animation/) as a .GIF... If I take that would I be able to put that somewhere to replace the current cursor?
I sent a message to Dafunk2 asking if he can make a .CAB with this... Hopefully this will sort it xD if not I shall keep searching.
edit: He hasn't replied yet... Guessing he's a busy man xD
I hear you with the cursor in these taskbar apps. I think I'm going to use this kids app until it's found how to pull this files out. Link ==->http://forum.xda-developers.com/showthread.php?t=497196
brooklyncat said:
I hear you with the cursor in these taskbar apps. I think I'm going to use this kids app until it's found how to pull this files out. Link ==->http://forum.xda-developers.com/showthread.php?t=497196
Click to expand...
Click to collapse
Well that does look interesting but I don't really want even more things installed on my phone.
LukeTurner93 said:
Well that does look interesting but I don't really want even more things installed on my phone.
Click to expand...
Click to collapse
It crashed & burn hahaha oh boy. I was tryin diff. things anyway. Someone sent me a note about a taskbar that doesn't have it. So I'm waitin for that.
brooklyncat said:
It crashed & burn hahaha oh boy. I was tryin diff. things anyway. Someone sent me a note about a taskbar that doesn't have it. So I'm waitin for that.
Click to expand...
Click to collapse
Haha, well I'll stay away from that then xD
I think I'll have to look more into how the wait cursor works so I can try and do it myself.
Hi,
Have you read dafunk2 taskbar thread?
guote:
TO ALL OF YOU THAT WANT ONLY THE CUSTOM WAIT CURSOR:
No guys, there is no way to make a cab for only the custom wait cursor.
This is because the custom wait cursor graphics are into the file shellres.192.dll. Into this file reside also many of the taskbar icons and other miscellaneous graphics. If I make a cab with only the file shellres.192.dll and you install it, you will have my wait cursor, but you will have many of my taskbar icons as well. It's good if you use my taskbar (but if you use my taskbar you already have my cursor ), but if you use another taskbar....you can easily understand what can happen.
So this is why there's no way to make a cab that installs only the cursor.
I'm thinking about to make some colors variations of the cursor, but I think that I will make them for cookers (and who knows how to edit dlls) and I will post the 32bit bitmaps in the Windows Mobile Themes section.
I'm sorry.....but I'm explaining why this is impossible
Anyway, many thanks for the great interest for my custom wait cursor
Regards,
dafunk
So, you need original cursor files and a man capable of editing dll.
artukas613 said:
Hi,
Have you read dafunk2 taskbar thread?
guote:
TO ALL OF YOU THAT WANT ONLY THE CUSTOM WAIT CURSOR:
No guys, there is no way to make a cab for only the custom wait cursor.
This is because the custom wait cursor graphics are into the file shellres.192.dll. Into this file reside also many of the taskbar icons and other miscellaneous graphics. If I make a cab with only the file shellres.192.dll and you install it, you will have my wait cursor, but you will have many of my taskbar icons as well. It's good if you use my taskbar (but if you use my taskbar you already have my cursor ), but if you use another taskbar....you can easily understand what can happen.
So this is why there's no way to make a cab that installs only the cursor.
I'm thinking about to make some colors variations of the cursor, but I think that I will make them for cookers (and who knows how to edit dlls) and I will post the 32bit bitmaps in the Windows Mobile Themes section.
I'm sorry.....but I'm explaining why this is impossible
Anyway, many thanks for the great interest for my custom wait cursor
Regards,
dafunk
So, you need original cursor files and a man capable of editing dll.
Click to expand...
Click to collapse
Ah right, that makes sense lol. Thanks for pointing this out
It can be done easily. You need to extract shellres.xxx.dll from the cab. Then edit shellres with reshacker, and find the wait cursor icons. Then swap them to what you need.
PS: Dont ask me step by step instructions.
ai6908 said:
It can be done easily. You need to extract shellres.xxx.dll from the cab. Then edit shellres with reshacker, and find the wait cursor icons. Then swap them to what you need.
PS: Dont ask me step by step instructions.
Click to expand...
Click to collapse
Oh right, this sounds good, is reshacker all I need to edit the .dll?
Can anyone point me in the right direction of a .CAB editor please?
I found this one but have not used it. Its available here on XDA.
I use WINCE Cab manager but it's a pay app I believe.
Bruce Inman said:
I found this one but have not used it. Its available here on XDA.
I use WINCE Cab manager but it's a pay app I believe.
Click to expand...
Click to collapse
Hmm, this looks good, but it's only for creating .CAB's.. Anyway, as I was dabbling in a bit of cooking (failed btw ) I found a program that extracts .CAB's for use in ROM's so I used reshacker and found there are a LOT of .BMP's for the cursor, but I have no idea what to do with them from here, if anyone has a use for them then I will happily extract them and post them here.
Okay, so I thought I'd found out how to do this... Well I have, BUT now I've got problems with taskbar icons (Messenger notification icon is all I found).
This icon has returned to the default 6.5 icon after I edited the shellress .dll, has anyone got any ideas?
Thanks once again,
Luke.
Hey Guys and Gals...
Just been messing with the sliders and settled on a grey bar across the top of the slider back ground..
I have a small problem with the alignment on the slider icons.
From what I can tell.. There are two bar icons one that is always present and one that appears as you scroll and changes to the tab that you are selecting.
The The top most is the one that changes as you slid across the bar. This one seems a little larger than the permanently visible.
Does any one know the manila files or a method to change so they are the same size or move the topmost down a couple of pixels.
Thanks
Neville
What did you use to change it? If your using HD Wall then I would say not that I know of since it does all the work for you. If you are using Mode9 or CFC_GUI then you can just edit the picture in photoshop.
I used manila editor to extract the PNG of the slider and changed that...
I'm ok with that part Hence the small grey line above the home icon...
I'm looking for a source that will tell how to change the slider foreground or background icons.
Any Idea?
Thanks
I´m not sure that i understand it right.
But you can use HDwall to create a slider. Put the images in HDwall convert and than you find the manila files in the HDwall programm folder. These you can copy to your Windows folder on your Device.
HDwall: http://forum.xda-developers.com/showthread.php?t=503511
Hope that is what you want.
Star... Thanks for bearing with me whilst my brain caught up with my hands....
Neville.Holland said:
Star... Thanks for bearing with me whilst my brain caught up with my hands....
Click to expand...
Click to collapse
I like what you're doing with the slider mate. It's always bugged me the way it is, and what you're doing looks really subtle. Are you planning on cabbing up the manila files when you're done?
johncmolyneux - I may be asking you to cab it
I've replaced the slider with the line above the icon. I – like you – hate the way the slider sits above the tabbar. However I’ve found that making the slider transparent shows that the two icons don’t sit over each other. This has always been a peeve for transparent slider frames.
So I’m now trying to find the foregrounds Icon and turn those transparent, so that it only looks as though there is one icon.
Whilst I’m there I was thinking of making the back ground icons transparent, so that you would only have current tab icon showing, one step at a time...
Thanks for the interest.. here is the slider if you want to try
Not zipped, just rename and remove the ".zip"
Neville
Backup Backup Backup
It's a simple alignment issue. I found the same issue when I made my sliders. I just use photo shop to make the current tab icon a bit bigger an move it ever so slightly over so that it full covers the lower icon. It's not hard just set the two images over one another in a layer to make sure it will cover it properly before uploading back into manila form.
Neville.Holland said:
Hey Guys and Gals...
Just been messing with the sliders and settled on a grey bar across the top of the slider back ground..
I have a small problem with the alignment on the slider icons.
From what I can tell.. There are two bar icons one that is always present and one that appears as you scroll and changes to the tab that you are selecting.
The The top most is the one that changes as you slid across the bar. This one seems a little larger than the permanently visible.
Does any one know the manila files or a method to change so they are the same size or move the topmost down a couple of pixels.
Thanks
Neville
Click to expand...
Click to collapse
Please can I have Kelly's phone number?
How do you know it's not just a link to Kelly's web cam?!!!!
Wil Badger said:
It's a simple alignment issue. I found the same issue when I made my sliders. I just use photo shop to make the current tab icon a bit bigger an move it ever so slightly over so that it full covers the lower icon. It's not hard just set the two images over one another in a layer to make sure it will cover it properly before uploading back into manila form.
Click to expand...
Click to collapse
Do you have any information, like what files sit where (foreground / background)?
thewahlrus said:
Please can I have Kelly's phone number?
Click to expand...
Click to collapse
Not sure! I'll have to ask her?
Neville.Holland said:
Do you have any information, like what files sit where (foreground / background)?
Click to expand...
Click to collapse
If your looking for a list of the manila names and exactly what they do I can't help you there. Depending on the ROM you could have 3 to 4 files that are associated with each tab. The slightly larger one is the foreground image while on the tab. The others are the static,highlighted,and tab selection on the settings page for tab order.
You can go through and change each one at a time till you figure it out or you can wait till somebody responds with the list you are looking for which I don't think will happen. Sorry........
I thought that may have been the case - Thanks anyway - Wanted to do something like this for an ages... will have to mark what the files do when I find them. I'm sure I saw a Wiki page but can't find it at the moment...
Managed to reduce the height on the selector of level one and two.
I know there is a list that will tell you what each manila goes to ie Home,MMS,Email,etc but it will not tell you what it does in relation to the tab as far as foreground,selected,static,etc...
KNows you where that is?
Hello,
I wonder if anyone is able to/wants to help me?
I am looking for confirmation of the manila file names for CHT 1.8... (I have been browsing the forum but can only find cabs and not the file names for this)
I have been looking through the files by using cfc-gui but I can’t confidently identify the right files!!
I just want to personalise my own files, initially to achieve a transparent home screen, but ongoing to something else.
The clock files are identified on the CHT thread, but not the bars/panels.
I think I have identified the following files (for not-pressed bars), but on modifying them and loading them onto the phone (in the Windows folder, and then restarting manila, and also soft resetting) they don’t all seem to change as I expected.
These ones do work:
0B7F6995_manila = appointment expand/pull-down grip
30D807DA_manila = thin bar with rounded corners to ‘finish’ lower appointment
0d61c97c_manila = date bar
740dc76b_manila = alarm bar
These ones don’t work:
43A0289_manila = appointment list bar
77BAF4F0_manila = notifications full bar
(if these aren’t what I think they are, then what have I changed by modding these files??!!)
I can see from various mods on this forum that people are able to change the files I want to work with, so I must just be playing with the wrong files.
Any help would be good, and it’ll save me time by further searching many pages of the forum and struggling to identify the files in the Windows folder (which is proving very difficult it seems).
Thank you.
it would be good if there was a manila library on here somewhere - cfc-gui is a really good tool, but it's just not doing a proper job for me on this occasion!!!
PS: I have current version 1.66 standard UK ROM on HD2, non-network specific. My CHT 1.8 is working fine, no issues, I just want to mod it a bit!
Agree with the above would be good if there was a list available as took me ages just to find the default cover art for music and couldn't find the mini music player background. I'm using cfc-gui as well and there's as many/if not more files under unknown as there are with headers which makes it really difficult. I've just been going through them 1 by 1 and I'm going to try edit a few on the weekend so will let you know what I find.
Cheers - any help on this would be appreciated. There are loads of mods for this already, but not many sharing info!!
I'll keep on looking...
In the meantime, if anyone else can assist - much appreciated it will be!
If anyone is interested, I found what I was looking for:
10376502_manila = notifications bar
438A0283_manila = appointments bar
I've attached all of these files as transparent in the .zip below. The only one that isn't fully transparent is the pull-down grip which I have added little grip dots to it so you know where it is, otherwise transparent.
** Back-up original files from the Windows folder before overwriting! **
the clock white background remains white, Any updates of others ?
nice work, i liked it, when ever I flash a new rom I was installing transparencies.. not anymore...
I hope you keep up with this threat...
can you show a picture of this please!!
many people will be much help if you put screenshot..if you ask someone's help try to help someone also and someone will apreciate yours
Has anyone asked Co0kieMonster?
johncmolyneux said:
Has anyone asked Co0kieMonster?
Click to expand...
Click to collapse
no one i assume...
why dont you share these info with them ...
Is something being requested in the posts above?
I can't quite work out what it is - is it a transparent clock? - if so, which sort?
Aren't there plenty of clocks for CHT on XDA already, do they not work?
AvRS said:
Agree with the above would be good if there was a list available as took me ages just to find the default cover art for music and couldn't find the mini music player background..
Click to expand...
Click to collapse
I've been looking for the music player manila files too.. Did you have any joy finding the music player background.. would be interested in this if anyone can help?
skilty said:
I've been looking for the music player manila files too.. Did you have any joy finding the music player background.. would be interested in this if anyone can help?
Click to expand...
Click to collapse
No didn't find them but I'm going to look at the files in a cab I used to change the music player when I get a chance this weekend and will let you know.
nniicckkss said:
If anyone is interested, I found what I was looking for:
10376502_manila = notifications bar
438A0283_manila = appointments bar
I've attached all of these files as transparent in the .zip below. The only one that isn't fully transparent is the pull-down grip which I have added little grip dots to it so you know where it is, otherwise transparent.
** Back-up original files from the Windows folder before overwriting! **
Click to expand...
Click to collapse
could someone post the original manila files please, as i`d like to revert back but didnt know how to back them up.. Thanks
**** turpin said:
could someone post the original manila files please, as i`d like to revert back but didnt know how to back them up.. Thanks
Click to expand...
Click to collapse
cmon guys you dont want ole **** turps to have to hard reset do you??? lol
Would like to help...
**** turpin said:
cmon guys you dont want ole **** turps to have to hard reset do you??? lol
Click to expand...
Click to collapse
u
I would like to help but I am using Dusk ROM with Cookie cooked in to it and skinned by G10 so I think they are not the ones you want.
Also a hard reset is always a good reason to try another ROM
Regards,
Rainbow86
**** turpin said:
cmon guys you dont want ole **** turps to have to hard reset do you??? lol
Click to expand...
Click to collapse
Depending on which files you edited..... you might be able to get them back by installing/uninstalling/reinstalling CHT..... maybe.....
Which particular files do you need...??
if by chance I have them backed up Ill post them for you... I dont have that many though....
There is a link in the FAQ section of the CHT thread's main post from Co0kie, for transparencies and some graphics restore cabs.
That should help answer some of your questions.
If you have any other questions still after looking at those cabs and files, let me know.
You can go directly to that thread to the first post where the link is, by clicking the CHT banner in my sig., or clicking the link above will take you there directly.
thanks for the responce guys! i'm actually not sure what manilla files they are lol, i just know there the ones which make the calendar and call history transparent. i've tried re-installing CHT but transparency is still there, it wasnt a cab see. i overwritten the original files with zip file on page one. but would like the glass panel look which dinik created. installing dinik theme the transparent calendar/call history is still there. someone who backed up the manila files before installing that zip file could help... were are they!! lol
**** turpin said:
thanks for the responce guys! i'm actually not sure what manilla files they are lol, i just know there the ones which make the calendar and call history transparent. i've tried re-installing CHT but transparency is still there, it wasnt a cab see. i overwritten the original files with zip file on page one. but would like the glass panel look which dinik created. installing dinik theme the transparent calendar/call history is still there. someone who backed up the manila files before installing that zip file could help... were are they!! lol
Click to expand...
Click to collapse
I have attached the original files that you highlighted a couple of posts above...
in the zip file are the original files if you want to drop them in manually, or a cab file for if you want to do it the easy way - all it does is place the two manila files in the windows folder, and it's not going to appear in the applications list either (you can't 'uninstall it'), its a one-way cab.
Thanks for all your help guys but looks like its not to be. they were the right manila files but after getting rid of the transparency`s and installing diniks theme everything has the glass panels but calender/call history. maybe the rom i`m using is affecting the theme (cleanex rom). but again thanks for your help guys.
i'm wondering if there is a way to do away with the slider bar in the default wm6.5 home screen. in the pic below (i'm a new user so just copy/paste without spaces, lol.) i just slid the bar all the way to the top to take a screenshot, and i wanna know if i can just remove it for a simple clean homescreen.
i53. tinypic. com/2zeypuh .jpg
Why not switch to "classic today" screen, then check out the themes forum for themes you can apply or search for specific plugins? Is it just that you want the titanium function but not the outline around the selected panels? I'm not sure how to do that, but it should be possible by editing the xml file.
well, when i switch to the classic today screen, or just uncheck Windows Default, under Items, i lose the transparency of the toolbar and taskbar. i guess that if i cold just get rid of the big dark bar in the middle of my screen i would be satisfied. i would just like to be able to see my wallpapers. and yes, i want the titanium function but not the outline around the selected panels.
Ok, gotcha. I don't know off-hand how to do that, though It probably would be as simple as editing the file, or finding the .png that is of that image (in the windows directory) and replacing it with a panel that is completely transparent.
Maybe someone with some experience will come along that already knows how to do that.
To get you started, you may want to look at this theme, which has already made the panels transparent. if you like it, you can just use it. Otherwise, you could potentially compare the xml files, of find the transparent image that he is using in there and copy it over to your device. It's been a long time since i checked/looked, but the xml that controls the sliding panels today screen is usually something like home.xml or something.
[note: if your phone is not touchscreen, use/look at this thread instead]
If you start playing around, back everything up first! You may also want to browse the "post your screenshots thread" and see if you don't come across some other UI that you like better (or another theme w/o the panels). good luck!
krazibeast said:
i'm wondering if there is a way to do away with the slider bar in the default wm6.5 home screen. in the pic below (i'm a new user so just copy/paste without spaces, lol.) i just slid the bar all the way to the top to take a screenshot, and i wanna know if i can just remove it for a simple clean homescreen.
i53. tinypic. com/2zeypuh .jpg
Click to expand...
Click to collapse
Yes, you can but you need to edit the bronzeres.dll check this thread to learn how to do it, backup first your original file.
Check these screens from my phone
Regards,
Enrique
Empel1960 said:
Yes, you can but you need to edit the bronzeres.dll check this [link] to learn how to do it, backup first your original file.
Check these screens from my phone
Regards,
Enrique
Click to expand...
Click to collapse
thank you all. but i'm not as experienced with xml, and editing. but whenever i do i end up running into security issues when trying to copy the files back to my phone.
about this bronzeres.dll file.. where is it located, and what would i need to change to alter the transparency?
krazibeast said:
thank you all. but i'm not as experienced with xml, and editing. but whenever i do i end up running into security issues when trying to copy the files back to my phone.
about this bronzeres.dll file.. where is it located, and what would i need to change to alter the transparency?
Click to expand...
Click to collapse
The bronzeres.dll is on the windows directory, but modifying the dll is more complicated than editing xml or cpr files, in my previous post there is a link where you can learn how to unsigne, edit, resign the dll file.
Regards
Enrique
Help
Hi i have the HD2
my ROM is 2.13.531.1 (90963) WWE
Manilla version 2.5.20121412.2
Radio 2.10.50.26
I downloaded the final cab and my phone still freezes when text messages come in and i cant send picture messages can someone please help me
thanks for all the help! i edited the bronzeres. dll and got exactly what i was looking for. check the URL for my result.
i52. tinypic. com/35l5bg9. jpg
but another question.. is there anyway to do away with the slider functionality and just have the titles. and when you tap it it takes you to the application? so there is no titile thats larger than the others, there just clickable links. just a question, because i'm content with my results.
Cabs available
Hi, I made a couple of CABS to make the slider transparent.
http://forum.xda-developers.com/showthread.php?t=909746
Hello.
I'm a "vet" WinMo user - especially with Omnia i900.
I also made this "Ultimate-Total" theme fro Omnia (S2U2, Manila, etc) in Modaco.com, a quite popular one.
Anyways... I bought now a HD2 Leo. I found pretty soon, that it's NOT the same (easy) way to edit the Manila (Sense 2.5 in Leo).
In Omnia, I just opened the Windows directory, copied all the .png files in a temp folder, edited them and re-copy them back. (Or even better, I was extporting the Manila theme with the M2DC app in my PC, opened the file with WinRar, edited them, imported them back to the Manila file and copied back to Omnia...
In Leo, it's NOT THAT easy, at all!!!... Anyways, after so many months, I found many-many things already done (in cabs) and I don't have to worry much... But, I want to edit/modify all the Slider icons, the Slider sellection icon and the tab's large icons (when you're changing tabs, the large one in the middle of the screen)...
Can you people, please, please tell me, how can I do that? Can you write me down the proccess? What progs/apps I need? What's all these icons' dimensions?
Reply me back, m8s.
P.S.: I'm using rom with Co0kie inside. So, there is an EXTENDED (large) Home screen - with 2 additional screens (left-right). The WALLPAPERS MUST be larger than the original/usual one, then - and how much (dimensions)?
What would be this larger/wide wallpaper's size?
Skinning Sense/Manila files is not really that complicated as it looks at first.
They actually come with their own format, but at xda you´ll find easy-to-use conversion tools. Look for "m9editor" or "CFC GUI+".
Especially with the second one, you´ll find out how "easy" it is to find the graphics and their names.
An easy way to find out what files you need to change is to download the thing you want to change, check the files, and then start your work - modding in the png-capable image editor you prefer, convert the work to Manila/Sense files.
That´s about it.
EDIT: Just forgot about the wide wallpapers: Panorama is 1440x800 (3 times the normal one), in CHT 1.8.5 it was 960x800.
tictac0566 said:
Skinning Sense/Manila files is not really that complicated as it looks at first.
They actually come with their own format, but at xda you´ll find easy-to-use conversion tools. Look for "m9editor" or "CFC GUI+".
Especially with the second one, you´ll find out how "easy" it is to find the graphics and their names.
An easy way to find out what files you need to change is to download the thing you want to change, check the files, and then start your work - modding in the png-capable image editor you prefer, convert the work to Manila/Sense files.
That´s about it.
EDIT: Just forgot about the wide wallpapers: Panorama is 1440x800 (3 times the normal one), in CHT 1.8.5 it was 960x800.
Click to expand...
Click to collapse
Thxs, really!