Database Info

XDA2s Keyboard

Wrote the following to TOMTOM
Dear Mr.T.Tom
I have an o2 XDA2s
1) The installer of TTNAV5 gives me the option to install post codes to main memory, SD card or internal backup store. However the full postcode selection only works if I place the post code file into main memory. On my Pocket PC this consumes about 25% of my machines total memory. Please fix this so that I can locate the Post Code file on the SD card with the map data and free up the wasted resources.
2) TTNAV5 does not fully support my hardware keyboard, when I try to enter numerics the function key used generates foreign characters with TTNAV5 - please fix this. It sometimes works (when accessing the full post codes for example) but not always.
3) Because my Pocket PC has a hardware keyboard SOME areas of TTNAV5 do not give me the option of selecting a soft keyboard. It appears that the code which displays the soft keyboard icon checks for a hard keyboard and if present is disabled. I never use the hard keyboard on my PPC as it is too fiddly and furthermore - when the PPC is in its cradle and I am navigating in car I have to remove it from the cradle to use the hard keyboard whereas in TTNAV3 I could simply use the soft keyboard in cradle. Also removing the PPC from its cradle disconnects my wired GPS receiver! all very frustrating...especially when the hard keyboard is not correctly supported. The strange thing is that in other areas TTNAV5 automatically assumes I wish to use the soft keyboard ... odd logic there.
All together an excellent piece of software with 3 irritating little bugs which I trust you will fix as soon as possible.
Click to expand...
Click to collapse
Recived this back today
Dear Mr Littleton,
Thank you for your feedback
1. Our software developers are looking into this at the moment.
2./3 The software is detecting that there is an external keyboard.
This has been passed to our development team for them to investigate, At present we do not have a solution for this.
As soon as we do have a solution it will be posted on our support website.
In the meantime we thank you for your patience.
With best regards,
The TomTom Customer Support Team
Customer 23/06/2005 11.16 PM
Click to expand...
Click to collapse

...alternative...?
I have the same 'issues' with my TTN5 installation...
I wonder if anyone in the forum knows a way of DISABLING the built-in keyboard?
From what I understand, there must be a driver, hook, or DLL that can be altered to prevent its use (and more important) the detection of the hardware by TomTom...
The thing is, I wouldn't know where to start!
Can anyone else shed some light?
R.

virtual mouse for ppc?

i mean, is that possible to develop a SW for ppc,
Which shows a mouse in ppcs screen, and we can use navigator key control the mouse.

That's quite easy, but would there be much point?
The program you're using would then loose use of the control pad.
An idea tho would be, say:
Record button toggles mouse (shows/hides cursor)
Joystick/pad controls mouse cursor
Contacts button sends left click
Calendar button sends context menu click.
It could work. I might play with this sometime. :wink:
V

there is a soft for virtual mouse
if u have a ppc with usb host function then u can connect ur computer's mouse to the ppc using the usb connection there is a software available for the mouse pointer here's the link
http://www.deje.gmxhome.de/download.html

u can make it someting special.
for exmaple.
in SW setting we can choose by which programme activating the mouse.

Re: there is a soft for virtual mouse
dhiraj228 said:
if u have a ppc with usb host function then u can connect ur computer's mouse to the ppc using the usb connection there is a software available for the mouse pointer here's the link
http://www.deje.gmxhome.de/download.html
Click to expand...
Click to collapse
yes i know about this.
but a virtual mouse does not mean only a tool to control the ppcpe.
it can be very helpful for one hand ppcpe operating.
sometimes we have only one free hand to use ppcpe.

Hi vijay or other developer
Any development/thought on virtual mouse - I like the idea of non stylus control of my wizard esp when in case. You could assign a button to switch on and off. You could call it VJmouse or VJrodent I would pay for this - I know that's music to your ears
Cheers

generating mouse clicks is easy enough but the drawing of the cursor in different locations would be the harder part. I have not seen cursors drawn in places other than the centre. How could that be done without drawing to the screen buffer?

One possible idea is a transparent window, say a 16 by 16. Any way I just wanted to mention that HP iPaq 4700 has a native app in its ROM that shows a mouse cursor and lets the arrow key area act as a touch pad just like on a laptop.

Guys, this is by the guy that did the FileDialogChanger, a genius in his own time:
http://www.geocities.co.jp/SiliconValley-Cupertino/2039/FakeCursorPPC.zip
Please indicate if it does or doesn't work. I don't think it would be too difficult to write a new mouse emulator, but there's no point reinventing the mouse wheel :wink:
V

Thanks vijay that's wicked
Finally true one handed operation of my pda - es
So I want have to pay you all my bucks after all!

I have tried this app and it is really good but has a couple of bugs. one is that it won't delete or backspace on the virtual keyboard, second it call and end call buttons and softkeys are immobilized when the fake cursor is operational. If it could be developed further and possibly include other pointer styles it would be an excellent app - I think marketable and some thing that should be part of the OS.
Smartphone users will be particularly interested as I am being a long trrm spv user.
cheers

wicked man... I like it
kudoos to the developer

vijay555 said:
That's quite easy, but would there be much point?
The program you're using would then loose use of the control pad.
An idea tho would be, say:
Record button toggles mouse (shows/hides cursor)
Joystick/pad controls mouse cursor
Contacts button sends left click
Calendar button sends context menu click.
It could work. I might play with this sometime. :wink:
V
Click to expand...
Click to collapse
I'd be interested in a "mouse" or "Cursor control" app.
IMHO the one thing missing from the Universal is a "clit-mouse" (the tiny joystick type thing you used to get on Laptops). I dont' think it would have been that hard to implement physically either.

vijay555 said:
Guys, this is by the guy that did the FileDialogChanger, a genius in his own time:
http://www.geocities.co.jp/SiliconValley-Cupertino/2039/FakeCursorPPC.zip
Please indicate if it does or doesn't work. I don't think it would be too difficult to write a new mouse emulator, but there's no point reinventing the mouse wheel :wink:
V
Click to expand...
Click to collapse
can someone describe exactly what this does?
Does it slow the device down at all?
(and has anyone translated the txt file in that zip???? )

Yes works qute will as a cursor / mouse you can control with d-pad. no does not slow device down and no can't translate txt but is quite self explanatory when you use. Give it a go tis cool!
Find attached for other users in case link goes down
I have added mouse cursor just place in same directory as fake cursor.exe and you will have typical mouse pointer.

meschle said:
Yes works qute will as a cursor / mouse you can control with d-pad. no does not slow device down and no can't translate txt but is quite self explanatory when you use. Give it a go tis cool!
Find attached for other users in case link goes down
Click to expand...
Click to collapse
I assume the .exe in the zip is for installing over Activesync? Or is it run on the PPC itself?

Run on ppc itself - i stuck it in \program files\

custom cursor
If it could be developed further and possibly include other pointer styles it would be an excellent app - I think marketable and some thing that should be part of the OS.
Click to expand...
Click to collapse
Just put any 16 color win95 cursor file in the same directory as FakeCursor.
a program called GoldIcon creates cursors that are compatible with FakeCursor.
I love this app, I have a top soft key dedicated to this so I can activate/deactivate it at any time.
there is no installation; the EXE can be located anywhere on the device and creates 2 lnk files in windows/startmenu/programs when run:
FakeCursor.lnk (toggle on and off) and FakeCursor Settings.lnk
Doesn't seem to be anything FAKE about it. It's a real Dpad mouse!

Thanks for the tip - do you have any you could post particularly mouse style pointer.
thanks

can you use XP mouse pointers, I havent seen a win95 machine for years.... or if you have one around would be great if you could simply post a few.

Q-See Security Camera Viewing

I'm pretty sure I'm the only person on the planet that actually has a set up like this... if I'm wrong, please post... there is no information out there about this old application.
I have a home surveillance system setup using 2 Q See DVR cards. Q See was nice enough to make a Windows Mobile 2003 application called "Pocket Camera" that connects to the Super DVR software used to record the cameras. You type in your IP and port, username and password and it connects to your home DVR system. Then it gives you a drop down list of the cameras you can view.
The software worked perfectly... until I got a VGA device. It only seems to work on qVGA. I know its a long shot... but does anyone know how to get this to work on a VGA device? The network portion works fine... it connects, authenticates and even gets the list of cameras. The software just has an issue rendering the video since (I think) it is expecting qVGA resolution.
Thanks!

Just wanted to post an update in case anyone is having this issue.
I emailed Qsee tech support and they actually called me back! I was amazed. It turns out that I was right and their old code does not support the new phones that have VGA resolutions. They said they were going to send this to their programmers for feedback. Hopefully they get it fixed, being able to view my cameras on my phone has been FANTASTIC.
If anyone has any idea on how to emulate a qvga screen on a vga device, please share.

I have not had any luck (as you had) with Q-see's tech support. In fact, it took nearly 5 weeks of daily emails and testing before they finally admitted to me that their software would not run on a vga device. Anyway, I installed ie 6.1 (I found a cab here) and it *for whatever reason* runs the pocket camera program.
pete

Since my last update, I've had horrible support from Q-See. They are not the strong customer service group I thought they were. I've had nothing but problems for the last 4 months... but I was just recently able to get this thing working on the vga touch pro 2 AND on windows XP.
I had to update to the newest version of SuperDVR, disable all of the activex protections so you can run their UNSIGNED ACTIVEX control. Why they refuse to sign the activex, I will never understand.
However, the cab that comes with the new SuperDVR actually works in VGA.
Basically, Q-See support sucks, but installing the new superdvr worked.

Did you have to buy the SuperDVR? I cannot find it on their website, or anywhere else for that matter.

scottmail said:
Did you have to buy the SuperDVR? I cannot find it on their website, or anywhere else for that matter.
Click to expand...
Click to collapse
Go to www.q-see.com and click on products
Then pick PC based DVR systems
Then pick your card
Then at the bottom, there is a table that has info in it. One of the column headers is "software".
Here is a direct link, but I don't know how long it will work. They seem to change their software direct links quite often and it keeps breaking my bookmarks.
Super DVR 6.2.2.4

MobileSrc MobileRemote 1.1 - NO SERVERSIDE CLIENT! (Mouse/Keyb/MediaRemote)

PLEASE TRY IT ON DIFFERENT OS's AND DIFFERENT DEVICES AND LET US IN ON YOUR EXPERIENCE
Thanks
At last. A remote control which doesn't require a server side client.. or.. to be more precise, it imitates a Bluetooth Mouse/Keyboard/Media controller, which means that your regular windows XP/Vista/7 (and maybe others?), your Mac OS, your PS3.. or your WM PDA can be controlled without installing additional server side clients.
I'll save you the trouble of multiclicking all kinds of screenshots and youtube videos - http://www.mobilesrc.com/MobileRemote.aspx.
MobileRemote isn't free and costs 8.99$/11.99$ - prices based on something i can't really figure out.
BUT, and that's a serious BUT, the main features of MobileRemote (from now on MR) - which are Keyboard and Mouse are EXTREMELY useful. the mouse feature, unlike in Salling's Salling Clicker, is much more precise because while Salling's mouse covers the entire screen, MR covers a specific range which makes the mouse very useful even on VGA devices. The mouse also has 2 left/right buttons, unlike in salling which requires a tap on the screen itself.
The keyboard is HUGE, has a nice LCDLike display when typing, has all kinds of symbols and shortcut keys matching windows (and Mac, it seems).. ctrl..alt..shift... and so forth.
There's also a G-Sensor Mouse which allows you to move your mouse when tilting your phone (or using the D-PAD).
In addition, there is a MediaPlayer/MediaCenter controller which allows basic actions like play, pause, fast forward, fast rewind, and track switching.
Now to the neat stuff.
MR allows you to record macros of movements and clicks to have your comp perform actions instantaneously. You can record.. and then load.
This can save you a lot of time if you're looking to "add" additional features of the app.
Feedback(?)
- The tilt mouse's resolution isn't good. it'll be be a tad jumpy.. and this is based on me trying.. not on that youtube video you can watch in their webpage.
- The keyboard is nearly perfect. I can honestly tell you I've never used such a comfortable and well adjusted keyboard. yes, it is a full screen keyboard, but as it's meant to control another device rather than your own, I guess it's important to have it respond fast enough and that you wouldn't have to delete 2 chars every 4 seconds. The keyboard also supports Portrait/Landscape modes to make everything even more comfortable. You also get typing feedback, somewhat like FingerKeyboard.
- The mouse.. it's almost like using your laptop's pad. Percise, clear, and even includes a scrolling bar on the right side. Tried that as well.. very well built.
- Reponse time for all features is very good. I tried a few minutes of excessive typing and moving and clicking. All went well.
- Pairing could be a ***** if not performed correctly, but following the instructions makes it easy enough. Oh, by the way, pairing might have to be redone if you already paired your device with your PC/MAC/PS3/PDA as it requires your device to be identified as a mouse and keyboard as well, rather than just a phone.
- Resolutions. right now, MR only supports QVGA/VGA resolutions. keep that in mind.
Comparison
Well, I won't waste your time comparing MR to any other Remote Control other than Salling since i don't see the point.
To make things clear, Salling Clicker and MobileRemote are different.
Yes, Salling Clicker allows you to write scripts, use XML based files to do pretty much everything you want and it can serve you better using Winamp, MediaPlayer, BSPlayer, system based options, etc.
What Salling doesn't offer (yet), is VGA support (although just a week ago or so, a member in Xda-devs changed the exe file to have bigger buttons, which i'm working with, but it isn't perfect), PS3/PDA support, and a decent mouse and keyboard, which is widely needed.
I use Salling to control my media, because there isn't a better competitor yet (not even G-Remote, which I also love, but doesn't support Winamp, which would be a basic feature in any remote control in my eyes), but for Mouse/Keyboard, I wouldn't think twice. 10$ isn't too much to pay if you really need it.
I have been asked more than thrice, if there's a mobile remote which doesn't require a server side client...
Well... here you go.
TESTS
Works on Diamond against
1. Toshiba U300 running Vista x86 SP1 and Windows 7 Build 7100 (MS Stack)
2. Asus EEE PC 1000HE running WinXP SP3 (Widcomm 5 Stack)
3. Desktop running Windows 7 Build 7000 (MS Stack + USB Dongle)
Works on Touch HD against
1. Toshiba U400 running Windows 7 Build 7100 (MS Stack)
2. Desktop running Windows 7 Build 7000 (MS Stack + USB Dongle)
3. Ubuntu 9.04 (with Blueman - original bluetooth support replaced)
4. Ubuntu 8.10 (Gnome and XFCE, also with Blueman)
Works on Topaz against
1. Windows Vista ultimate 64 bit & 7 Ultimate 64 bit !
DOESNT work on Rhodium for some reason

Thanks for the heads-up! I may update my Media Controller bible with the new app.

you're invited to remove the sticky if you move this to another thread. no point in having this in 2 different places and taking up space.

BTW, in what configuration did you test it?
I've tested it on my HTC Universal and x51v (bot running WM6.1 and the MS BT stack - Widcomm isn't supported) against two (BT discoverable) Win XP desktops (Thinkpad a31p and HP TC1100). It didn't find the desktops at all. Did you have similar issues?

I ran it on a Diamond against a Toshiba Laptop running Vista with MS Stack and a Windows 7 Desktop with that new weird BT interface microsoft are running).
both worked.
Notice you need to pair the device from the pc WHILE running the pairing process in MobileRemote.
I might create a video to show how to pair.

I managed to pair with an ASUS EEE PC 1000HE running WinXP and a WIDCOMM driver and it works perfectly.

nir36 said:
I ran it on a Diamond against a Toshiba Laptop running Vista with MS Stack and a Windows 7 Desktop with that new weird BT interface microsoft are running).
both worked.
Notice you need to pair the device from the pc WHILE running the pairing process in MobileRemote.
Click to expand...
Click to collapse
Thanks, this may have been the problem - I thought it would find all the desktops, without my pairing it from the desktops.

I suggest we list the OS's and device types it works on...

OS/Device list started. please let me know which device you use and if it at all works.
please list (as i did), the OS, Stack and type of PC.
I'd also like to know if you tried pairing to another device like another PDA or PS3..
thanks

FULL VER...
$8.99 ???????????????? is too high for me
i need full ver ..
any idea ???

nir36 said:
At last. A remote control which doesn't require a server side client.. or.. to be more precise, it imitates a Bluetooth Mouse/Keyboard/Media controller, which means that your regular windows XP/Vista/7 (and maybe others?), your Mac OS, your PS3.. or your WM PDA can be controlled without installing additional server side clients.
I'll save you the trouble of multiclicking all kinds of screenshots and youtube videos - http://www.mobilesrc.com/MobileRemote.aspx.
MobileRemote isn't free like Salling Clicker (which i ADORE) and costs 8.99$/11.99$ - prices based on something i can't really figure out.
BUT, and that's a serious BUT, the main features of MobileRemote (from now on MR) - which are Keyboard and Mouse are EXTREMELY useful. the mouse feature, unlike in Salling's Salling Clicker, is much more precise because while Salling's mouse covers the entire screen, MR covers a specific range which makes the mouse very useful even on VGA devices. The mouse also has 2 left/right buttons, unlike in salling which requires a tap on the screen itself.
The keyboard is HUGE, has a nice LCDLike display when typing, has all kinds of symbols and shortcut keys matching windows (and Mac, it seems).. ctrl..alt..shift... and so forth.
There's also a G-Sensor Mouse which allows you to move your mouse when tilting your phone (or using the D-PAD).
In addition, there is a MediaPlayer/MediaCenter controller which allows basic actions like play, pause, fast forward, fast rewind, and track switching.
Now to the neat stuff.
MR allows you to record macros of movements and clicks to have your comp perform actions instantaneously. You can record.. and then load.
This can save you a lot of time if you're looking to "add" additional features of the app.
Feedback(?)
- The tilt mouse's resolution isn't good. it'll be be a tad jumpy.. and this is based on me trying.. not on that youtube video you can watch in their webpage.
- The keyboard is nearly perfect. I can honestly tell you I've never used such a comfortable and well adjusted keyboard. yes, it is a full screen keyboard, but as it's meant to control another device rather than your own, I guess it's important to have it respond fast enough and that you wouldn't have to delete 2 chars every 4 seconds. The keyboard also supports Portrait/Landscape modes to make everything even more comfortable. You also get typing feedback, somewhat like FingerKeyboard.
- The mouse.. it's almost like using your laptop's pad. Percise, clear, and even includes a scrolling bar on the right side. Tried that as well.. very well built.
- Reponse time for all features is very good. I tried a few minutes of excessive typing and moving and clicking. All went well.
- Pairing could be a ***** if not performed correctly, but following the instructions makes it easy enough. Oh, by the way, pairing might have to be redone if you already paired your device with your PC/MAC/PS3/PDA as it requires your device to be identified as a mouse and keyboard as well, rather than just a phone.
- Resolutions. right now, MR only supports QVGA/VGA resolutions. keep that in mind.
Comparison
Well, I won't waste your time comparing MR to any other Remote Control other than Salling since i don't see the point.
To make things clear, Salling Clicker and MobileRemote are different.
Yes, Salling Clicker allows you to write scripts, use XML based files to do pretty much everything you want and it can serve you better using Winamp, MediaPlayer, BSPlayer, system based options, etc.
What Salling doesn't offer (yet), is VGA support (although just a week ago or so, a member in Xda-devs changed the exe file to have bigger buttons, which i'm working with, but it isn't perfect), PS3/PDA support, and a decent mouse and keyboard, which is widely needed.
I use Salling to control my media, because there isn't a better competitor yet (not even G-Remote, which I also love, but doesn't support Winamp, which would be a basic feature in any remote control in my eyes), but for Mouse/Keyboard, I wouldn't think twice. 10$ isn't too much to pay if you really need it.
I have been asked more than thrice, if there's a mobile remote which doesn't require a server side client...
Well... here you go.
TESTS
Works on Diamond against
1. Toshiba U300 running Vista x86 SP1 and Windows 7 Build 7100 (MS Stack)
2. Asus EEE PC 1000HE running WinXP SP3 (Widcomm 5 Stack)
3. Desktop running Windows 7 Build 7000 (MS Stack + USB Dongle)
Works on Touch HD against
1. Toshiba U400 running Windows 7 Build 7100 (MS Stack)
2. Desktop running Windows 7 Build 7000 (MS Stack + USB Dongle)
Click to expand...
Click to collapse
If drag & drop is needed, can MobileRemote do that ?
It seems multi-touch is required (not supported in WM)
Thanks in advance.

why would you need multi-touch for drag and drop?

nir36 said:
why would you need multi-touch for drag and drop?
Click to expand...
Click to collapse
In MobileRemote, how to move mouse pointer when when left button is pressed and held ?

hehe.. just tried it and it didn't work. didn't notice that before and i've been using it for quite a while now. apparently, it wasn't as important to me as it is to you.
I will bring it up with the programmer.

there is a drag and drop but unfortunately i need you hold down the left click on the mouse option of the program. I say 3 sec or so. That's the best its going to get for now other than that i have no complaints about this awesome program, AND I am using MR to write this so there u go...

MOD EDIT:
WAREZ WILL NOT BE TOLERATED IN THIS FORUM!
warned!

so i have an xperia which i connect to my bluetooth enabled navigation systm in my car. since the phones blutooth is able to connect, is it logival to think that this program would allow me to use the phone as a wireless remote?

Do i understand that you're trying to confirm your bluetooth is working correctly? because regardless.... there's no reason why it wouldn't work just like on any other phone with bluetooth.

Topaz & Rhodium
Topaz (Diamond2) working fine onboth windows Vista ultimate 64 bit & 7 Ultimate 64 bit !
Rhodium (Touch Pro2) not working on either platform. I have version 1.1, and it cant connect to the new bluetooth stack.

Crap.... rhodium/fuze would be the 2 obvious choices for this software....

[Q] Android Keyboard with Alt key?

Is there a way of submitting Alt commands via an Android keyboard to my windows PC?
I presently use Air Mouse on an Ipod Touch to control my HTPC remotely.
This is the only use I have for the thing and I'd like to think that there will be the perfect Android solution for me soon.
The benefit of Air Mouse over RemoteDroid and GMote is the Alt key ability which neither of the Android apps have (or if they have I haven't found it yet), a function I find a lot of use for.
(I should add that the only Android device I have at present is an HTC Desire....so I guess that could be the limitation rather than the apps)

I don't really understand what you mean by alt key ability. Could you please explain, and maybe we can help sugest a solution?
What is it that this alt key ability of air mouse do, or more importantly, what is it that you want to accomplish with such an alt key ability?

Thanks for the reply, I had a feeling I wasn't being very clear.
I'd like to use my Android device as a trackpad and mouse for my HTPC.
My media player of choice (MPC-HC) uses a lot of keyboard shortcuts with the "Alt" signifier. For example Alt+X closes the program. These shortcuts are especially important because the program runs in a fullscreen mode which removes any context menus.
All the various android soft keyboards I have seen have no Alt key so I would lose a lot of functionality controlling the HTPC from an android device.
I have read that pressing the trackball twice on an HTC Desire may be a substitute for pressing the "Alt" key but have never got this to work in practice.

Just found an app that might suit your needs. I suggest you check it out.
GRemote Pro
Edit:
Ok, I just tried this app out, and it does exactly what you need.
It comes packed with an app alt, ctrl, tab and del buttons that let you alt+tab among other things.
I didn't see MPC-HC in the server setup, but that's not a problem as you can configure your own profiles with specific commands.
Fair warning, it's a bit on the slow side (seems to be a port of a winmo app), but I'm sure it'll get better with time and updates. It's a very polished Remote app for android and it even comes with drivers for a G-sensor controller to play games with (use android as wii-mote/controller).
This app defenitly rocks.

You sir (or madam) are a legend.
I was disappointed at first to see that this app doesn't simply add Alt and Ctrl keys to the standard keyboard, but it does allow considerable control of the media player directly.
Need to have a much longer play to see if it's really what I need...but I appreciate your effort already.

Another Suggestion
Have you tried unified remote?
It's got a full windows keyboard, You can create your own custom remotes and if you wanted, you could even have multiple droids connected.
Yes, this reply is s bit late, but better late than never

try Hackers Keyboard

I installed hackers keyboard and tried to activate it. It gives a prompt message that this will collect all information except passwords, including personal data and credit card numbers....!!!