Related
After I upgraded to the helmi rom my GPS seems to have stoped working. Google maps attempts to get a fix for about 20 seconds, then throws an error that the GPS is not responding. Has anyone else experienced this problem? I have installed quickgps and downloaded the update with it, didnt seem to help.
rucus said:
After I upgraded to the helmi rom my GPS seems to have stoped working. Google maps attempts to get a fix for about 20 seconds, then throws an error that the GPS is not responding. Has anyone else experienced this problem? I have installed quickgps and downloaded the update with it, didnt seem to help.
Click to expand...
Click to collapse
I also have a problem. I was using helmi then upgraded to helmis big storage rom. I was geting gps fix in 20-30 seconds now i stood outside on different options (built in gps, other com 4) and waiting 5-10 minutes, nothing just searching for gps signal
Use a GPS test app, like GPSTest to "warm" up your GPS receiver. If it finds satellites, exit and try running your GPS software. I've had success at this point.
If that does not work, note the settings used on the test GPS app, and plug them into your GPS software.
If that doesn't work, start off with fresh settings by doing a hard reset.
This is already covered in a thread or two, btw
Priming
vasquja said:
Use a GPS test app, like GPSTest to "warm" up your GPS receiver. If it finds satellites, exit and try running your GPS software. I've had success at this point.
If that does not work, note the settings used on the test GPS app, and plug them into your GPS software.
If that doesn't work, start off with fresh settings by doing a hard reset.
This is already covered in a thread or two, btw
Click to expand...
Click to collapse
Was able to find GPSTest, and after that all is well. It must need to prime the reciever
I experienced issues at first but once you get it to connect to first time all is good.
i couldn't get a gps fix on anything until i installed TomTom. Now TT works perfectly and so does every other GPS. I believe that GPSTest will work as well but for some reason google maps and WLS won't "warmup" the gps until it's already be initialized by something else.
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
pdamd said:
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
Click to expand...
Click to collapse
1 Run QuickGPS
2 Ensure that in Tomtom GPS is configured as other NMEA, comm 4, and 4800.
I have the same problem. Did you wait long enough? It takes about 10s or more to initialize TomTom itself and then he starts looking for a GPS device. And indeed I ran QuickGPS too, good practice
pdamd said:
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
Click to expand...
Click to collapse
If you read the HTC documentation, you'll see that you've to first (before installing the TomTom software) run the QuickGPS fix application. After that, install your TomTom SW, your card. Normally you won't have to change anything to the GPS configuration. The TomTom SW come configured with "Internal GPS Antenna" and should work like this.
Of course you have to be outside when you run the GPS
Be patient the first time. My Polaris take about 2 to 5 minutes before initializing the GPS. After that, 10 to 20 secs is generally needed to initialize the GPS (cold start).
you've to first (before installing the TomTom software) run the QuickGPS fix application
Click to expand...
Click to collapse
I didn't run quickgps before installing tomtom and it works perfectly.
I reinstall TomTom and choose other NMEA, com 4, 2400.
I will also try with 4800.
In my case, the gps is incredible. It fix gps in 10 to 20 seconds.
Ziggy
pdamd said:
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
Click to expand...
Click to collapse
Hi,
Mine works just fine. However, when I start TomTom I also get the message "No GPS Device!" bottom left. After a while it changes to "Waiting for a valid GPS signal..." This is typical if you are not receieving any GPS info because the device can't 'see' the satellites. On the bottom right of the screen you will see 5 'strength' indicators. Tap on this to bring up the next screen. At the top right there will be a battery strength indicator. Under this there is again a signal strenth indicator (with text 0 satelites). Tap on this and you should get the GPS Status screen. Tapping the 'configure button' should show the 'built-in GPS receiver' - tap Select to return. Once you move your device to a position where it can 'see' some satelites this will be shown on the GPS status screen.
In summary, the message really means 'no GPS signal' rather than no GPS device present.
Cheers
Michael
GPS not working, please help!
Hi my friends!
I can't get GPS to work on my TC!!
I know I have to run quickgps first, but ONCE I did, and since that I always get the message that it couldn't connect, try later. I know that there is a file here that I can install on the device, and I did it successfully, but nothing changed.
I have installed the program on the device, it prompted me that it will replace the existing one, and I ran it after a soft reset. Still can't connect.
What is strange for me, is that I have downloaded a program called sirftech, that can tell on which port my built-in device is listening on, but it couldn't find my gps device. It founds somethings on com7 and com9 but to no avail.
on com4 at 4800 nothing happens.
I also install iGO 2006 which is quite familiar here in Europe, but it also cant nor detect neither use any gps. I have been waiting for 20 minutes with this program to get the satellite data, but nothing.
I am lost here!
Anybody having the same problem?
Or my device may be faulty???
moire76 said:
Hi my friends!
I can't get GPS to work on my TC!!
I know I have to run quickgps first, but ONCE I did, and since that I always get the message that it couldn't connect, try later. I know that there is a file here that I can install on the device, and I did it successfully, but nothing changed.
I have installed the program on the device, it prompted me that it will replace the existing one, and I ran it after a soft reset. Still can't connect.
What is strange for me, is that I have downloaded a program called sirftech, that can tell on which port my built-in device is listening on, but it couldn't find my gps device. It founds somethings on com7 and com9 but to no avail.
on com4 at 4800 nothing happens.
I also install iGO 2006 which is quite familiar here in Europe, but it also cant nor detect neither use any gps. I have been waiting for 20 minutes with this program to get the satellite data, but nothing.
I am lost here!
Anybody having the same problem?
Or my device may be faulty???
Click to expand...
Click to collapse
My GPS run well on my TC. First of all, I think it is normal that the program "SirfTech" don't find your GPS because the GPS Chipset into the Touch Cruise isn't a Sirf but it is integrated into the Qualcomm 7200 (processor).
Now to come back to your problem I suggest you to redo the TomTom installation. But before, insure to uninstall the previous version (not apply as an update).
Uninstall TomTom
Restart your device
Run QuickGPS
Reinstall TomTom (from the HTC CD). Install it into the main memory of your device, not on the storage card !
Restart your device
Launch TomTom / configure it
Check the configuration of your GPS (into "Change preferences" => "Show GPS Status" => "Configure" (Select your GPS receiver)
Built-in GPS received should be selected by default. If it is not the case, choose this option
Go outside and wait 1 to 5 minutes (should be less). Normally TomTom will work.
Hope it help.
I had the same problem yesterday. The GPS had functionned well but suddenly it would not start anymore. Once I switched the unit off (press the on/off button for about 5 secs) and on again it worked without problems. Probably you can just do a soft reset by pushing the resetbutton.
Thank you for you answer!!!
I have never installed tom tom, because I already have another navigation software, igo. the problem is that i cannot run quickgps, it is saying "Connection failed. Please try again later."
I already downloaded and installed the quickgps found on this forum, but it is the same.
so does it make any sense installing any program until I can't run quickgps?
or should the gps work also without quickgps just slower at startup?
(offtopic: and why my device sometimes does start charging if I connect to usb cable, and sometimes it does not??)
moire76 said:
Thank you for you answer!!!
I have never installed tom tom, because I already have another navigation software, igo. the problem is that i cannot run quickgps, it is saying "Connection failed. Please try again later."
I already downloaded and installed the quickgps found on this forum, but it is the same.
so does it make any sense installing any program until I can't run quickgps?
or should the gps work also without quickgps just slower at startup?
(offtopic: and why my device sometimes does start charging if I connect to usb cable, and sometimes it does not??)
Click to expand...
Click to collapse
Which ROM are you using ?
Thank you for your post, but I have already tried both the restart and the reset button, but nor helped.
I am getting nervous.
But I have found a solution to my off-topic question: There was a check marked saying "Do not charge the device when turned on and connected to PC" In settings > Power. After I unchecked, it charges from usb even turned on.
I hope that my gps problem is so easy as well, but I just simply can't get it to work...
edsel said:
I had the same problem yesterday. The GPS had functionned well but suddenly it would not start anymore. Once I switched the unit off (press the on/off button for about 5 secs) and on again it worked without problems. Probably you can just do a soft reset by pushing the resetbutton.
Click to expand...
Click to collapse
Thank you, it is
1.25.405.1 wwe; dated 12/11/07
radio is 1.58.21.23
protocol: 25.65.30.04h
academic said:
Which ROM are you using ?
Click to expand...
Click to collapse
SOLVED!!!
Dear friends!
Thank you all for your kind help!
I have solved the GPS problem.
I am so stupid that I couldn't find this solution earlier...
So, Under Settings there is an option called External GPS.
It was not set up correctly. Now the GPS program port is set to COM1, the hardware port is (none), baud rate is 4800, and checkbox is checked, this is important. And igo is set manually to use com1.
Now iGO is able to seen 6 satellites from my desk near to the closed window!!
It is not yet found the position but it is working on it (i am patient as quickgps is still not working)
Thank you all and I hope I will help someone else later.
Moire
What device are you using? I have an HTC p3300 and have had this problem foreverr.
NO GPS Device!!! Please help
I bought my HTC TC yesterday. I previously used the Kaiser.
I've flashed to Bepe rom and then installed Tomtom from the CD.
I have not not been able to get any GPS signal yet.
I have read this thread but it still does not work. The yellow and blue icon on the GPS status screen doesnt move either. I have updated the quickGPS software but it didnt help.
I hve off course chosen internal GPS antenna in the configuration part.
Should I configurate the external GPS application or is it irrelevant anyway since I am not using it? and if yes how? What should be the settings (if this is relevant)?
Should I maybe change my Radio version? Can it help?
Please help
Thanks
Edit: After 2 days of trying it, no it works, I was ready to hard reset and installed sprite back-up. I have no idea why it did not work and why it is working now...
Anyway
my first polaris had the problem to get the position after 10-20 min outside a building , and then the sat-Bars on tomtom sat-konfig jumps around with every satellit forever. sometimes my car goes 347km/h ))). so when i press with my fingers hard on the back near the camera, it fixes the Position on gps. This seems to be a contactproblem between the gps-Antenna and the Receiver. I send it back, got a new one, now it runs like it shut.
it shut also run without quickgps, it only starts slower. Quickgps is just downloading a little database with the sattellites what are now in sight.
otherwise the gps-rec has to wait, to get all sats what are now on the horizon .
i think you have a connectionproblem to the internetserver from witch qgps get the data, if you can surf the internet with the polari, qgps shut download.
hope it helps
Piki
What is a good program that works with the TP so that I can test to see if my built in gps is working correctly?
I have TOMTOM7 installed and the application works but I can never see any satellites.
I tried mapopolis but i can't seem to establish a connection to the gps.
I updated the gps info using quick gps.
What com port and baud rate does the unit use?
What settings should I have in the "external gps" settings?
Thanks for your help!
Use the attached program to test the GPS.
It will search COM ports automatically
But I guess you can know the port from the settings tabs "External GPS" icon if it's like Kaiser
Anyway, I will be of further use in like 4 days
pjmiebach said:
What is a good program that works with the TP so that I can test to see if my built in gps is working correctly?
I have TOMTOM7 installed and the application works but I can never see any satellites.
I tried mapopolis but i can't seem to establish a connection to the gps.
I updated the gps info using quick gps.
What com port and baud rate does the unit use?
What settings should I have in the "external gps" settings?
Thanks for your help!
Click to expand...
Click to collapse
ok it seems its on com 4 with baud rate of 9600.
ill put it by the window and see if any satellites come up.
The screen just right now says: GPS starting up
Edit: ok great I just got 3 satellites. I guess it works!
Great that it works
You need at least 4 though to get a fix
Kindly, post your radio info and your location and let me know how many satellites did you view (press up on dpad as the 1st screen shows only upto 8 and it can see more, hopefully)
pjmiebach said:
ok it seems its on com 4 with baud rate of 9600.
ill put it by the window and see if any satellites come up.
The screen just right now says: GPS starting up
Edit: ok great I just got 3 satellites. I guess it works!
Click to expand...
Click to collapse
posting the number of satelites you receive is a bit pointless.
This will depend on many factors such as
1) The number of sats viewable at any given time in your area (the sats are not geostationary and therefore move around)
2) The location of the sats during the test - some could be close to the horizon and therefore have a week signal
3) Weather conditions, cloud rain etc,
4) Terrain
etc
etc
Basically, you are right.
But if you are fast enough, you can test several radios in the same 10 mins.
And you can judge by testing in the same place which radio is better for GPS (Fix & View).
A mention of your location will be a referrence for others.
There's a thread with more radio fuss to hold such info to be useful in the future.
Hi pjmiebach - thanks for the hint and the software - I get 4 satellits (yellow beamer) but when I tryit again with Google Maps it finds no Satellite ???
Any explanation from yur side ?
as a matter of fact, on-board GPS works with just about any baud rate you select - so choose the fastest
peter7 said:
Hi pjmiebach - thanks for the hint and the software - I get 4 satellits (yellow beamer) but when I tryit again with Google Maps it finds no Satellite ???
Any explanation from yur side ?
Click to expand...
Click to collapse
errr It worked find with TOMTOM7 after taking like 15 min to find it's first fix. Never tried Google maps yet cause my data plan doesn't start until the 8th of Sept.
you can start google maps and check in the right menu for gps and tap that one so it uses the internal gps instead of internetconnection.
it is also a good idea to goto connectionsettings and wipe all existing connections as activesync wont require these and you can download them later from the provider website or by running the carriersetup
ok. ive broken something on my raph. gps was working fine when i flew up to sydneyim guessing ive fiddled with something (external gps setings) and now no worky. tom tom7 is set to internal. if i disable external gps gpstest pauses on com 3 but nothing. if i turn windows on. it stops on com 4 shows some progress bars but they are all at 0 ive soft reset. taken the battery out canter figure out whatsoever wrong. any ideas would be awesome
TT7 and google maps
My tt7 takes 2 - 3 minutes to get a fix.
Google maps takes about 10 secs.
If i start tt7 right after i used gm it takes about 20 secs to get a fix.
I'm gonna try gpsgate and changing the baudrate a bit, see if it helps.
I'll let you know.
** Edit **
GPSGate does the trick for me.
Buy it at your fav appstore and create a new virtual com port for all NMEA progs, go to tt7 gps settings select other nmea device, select the com you just created, at max speed.
com port problem
atreidae said:
ok. ive broken something on my raph. gps was working fine when i flew up to sydneyim guessing ive fiddled with something (external gps setings) and now no worky. tom tom7 is set to internal. if i disable external gps gpstest pauses on com 3 but nothing. if i turn windows on. it stops on com 4 shows some progress bars but they are all at 0 ive soft reset. taken the battery out canter figure out whatsoever wrong. any ideas would be awesome
Click to expand...
Click to collapse
My Raphael do the same but after hard reset will be work again.
mzperxfl said:
My Raphael do the same but after hard reset will be work again.
Click to expand...
Click to collapse
Me too! :-( No, I really do not enjoy hard resets...
Another nice GPS testing software is VisualGPSce. Be sure to get that.
I wonder if the problem was with QuickGPS. VisualGPSce was telling me that it "saw" 11 satellites, but wasn't able to lock onto any of them. I know that it had worked previously, but then I had a couple of days break and QuickGPS had updated it's data during that time. After the Hard Reset, I haven't used QuickGPS.
About the performance... seems to get fix quite fast, but looses them very easily too. I tracked today a half hour buss ride and I frequently lost the connection. (Sure it was not the most optimal situation...). Also the accuracy wasn't that good - well, either the GPS or Google Maps. actually VisualGPS showed that the GPS wasn't very accurate in following what was happening. The velocity would go to 0 only about 10 seconds after the buss had stopped at trafic lights or buss stop. Actually the buss frequently took of before the GPS showed us stopped. And then it was extremely slow on catching up. On Google Maps you could see the dot still advancing when the buss had stopped for that 10 seconds. Completely off the road - but that might as well be Googles error.
I do not have TomTom on this, but certainly the speed accuracy from VisualGPSce is not nearly as accurate as my TomTom 720.
Check also that the assisted GPS is not active.
If this option is actived, you lose the signal each x seconds.
To check this option I use Advanced config.
Note : I've a Diamond and one Raphael, same configuration, the Diamond find a fix into 40sec and the Raphael takes sometimes 5min!!!.
NLS said:
as a matter of fact, on-board GPS works with just about any baud rate you select - so choose the fastest
Click to expand...
Click to collapse
i find this to be true as well but the kaiser gps radio worked far better than this touch pro in every app I tried. I can put the TP in my car window and get a signal with random disconnects but if i put it in my lap i cant get anything. I could put the kaiser in my trun and be fine lol. Hopefully some upgrades to the radio software will be coming soon. Same result with me with .19 and .31
Hello,
I tested GPSTuner 5.4, VisualGPS, GoogleMaps and TomTom 7 and I have a strange problem... I installed thos programs after hard reset to be sure...
In the GPS information window the GPS position changes but the speed is always 0km/h and in TomTom or GoogleMaps my position on the map don't move...
Have you seens this problem ?
Any kind of solution ?
PLZ....
PS :
Where can I find rom &Radio version ?
What is your TomTom 7 version ?
Hello All..
this is my first post. I just received my TP today via Vodafone. I havwe sucessfully loaded on TomTom 6 and I have it working with the TT external GPS receiver.
can someone advise me whether the Touch Pro's internal GPS will work and if so, how do I go about setting it up.
PS, I only see 4 options in TT6, and none say internal.
Thanks in advance for any assistance
what to do about navigator 7 ( tomtom ) with gps 1.20 when i start tomtom the first time , it can take up to 1/2 hour to get gps signal whit the internal gps.
when i use my external globalsat gps i have signal in less then 30 secconds.
anyone has anny ideas????
Did you already use the program called "quick GPS" on »Programs?
Normally fisrt time you tried to get signal take a long time, after shoud be less time. My pro is slow, sometimes take up 2 minutes, not more.
Try to use "Quick Gps", this program can "say to GPS" your position trough GSM signal I think...
Robert
Yeah, my Pro normally takes about 2 mins, using Quick GPS. However, that's a lot slower than my Kaiser used to connect - even from cold it would often get a lock within 30s.
What I have noticed with the Pro is that although it takes a long time to get a lock, when it does it is always on 4 bars or more. Makes me wonder if there is a setting somewhere (in the registry maybe?) which tells it not to report it's connected until it has a lock on several satelites?
Is there perhaps a way to get it to connect faster, but with fewer sattelites so perhaps slightly less accurate?
Rowan
I did all what you say and still no gps fix :S
can somebody please help ???
I'm the same. I managed to get a fix using Google Maps when on the road 3 days ago, but I can no longer get a fix with the same program. I've installed TT6 and cannot get a fix - just says "No valid GPS signal". With my Nokia E90, I get a fix sitting indoors on the sofa!!
Any help anyone?
AMoosa said:
I'm the same. I managed to get a fix using Google Maps when on the road 3 days ago, but I can no longer get a fix with the same program. I've installed TT6 and cannot get a fix - just says "No valid GPS signal". With my Nokia E90, I get a fix sitting indoors on the sofa!!
Any help anyone?
Click to expand...
Click to collapse
same here and I have done everything in all of these and other posts. TO me it jeust seems the internal gps is just not as good as th kaiser was
work around
hi,
i was bothered by the same issue.
i found that googlemaps gets a fix within 10 secs.
tt7 takes 2 to 3 mins. if i start gm first and get a fix, close gm and then start tt7 i have a fix in 20 secs.
gpsgate has the same effect. i created a virtual com port with gpsgate, and selected that port in tt7.
i prefer the gm workaround because gpsgate is not free and has to be terminated every time after use, or it`ll drain the battery.
please post your results if you try this yourself.
start quickgps and download the new file.
start tt7 and choose built in gps.
exit tt7
turn device off (long press on powerbutton)
turn it on
wait for it to boot and start tt7 and wait till it has found the gps.
walk to an open area and keep walking. it will find a fix faster that way.
Delete the Logs
This has worked for me...
Was having loads of problems with TT7 and googlemaps (altho that performed better than TT7)
Spotted elsewhere on this site (sorry, dont remember where exactly, was for a different phone tho...)
DELETE THE GPS LOGS!
Power down the phone, once its restarted, in file explorer, delete the GPS logfiles from the windows directory. (sorry, cant remember their exact names, but they're pretty obvious).
Now TT7 works reliably.
philg2000 said:
This has worked for me...
Was having loads of problems with TT7 and googlemaps (altho that performed better than TT7)
Spotted elsewhere on this site (sorry, dont remember where exactly, was for a different phone tho...)
DELETE THE GPS LOGS!
Power down the phone, once its restarted, in file explorer, delete the GPS logfiles from the windows directory. (sorry, cant remember their exact names, but they're pretty obvious).
Now TT7 works reliably.
Click to expand...
Click to collapse
GPSLogFile
GPSLogFileBack
deleted these and it seems to make tomtom find the gps faster and work better .. but still the reception is not that great..
I know there are MANY threads to the GPS issues and I am not having problems with GPS lag. I have searched and read and already have the tweaks installed (running the Elite rom rc2 which already had all the tweaks setup) and changed the no data sleep timeout to 1.5 seconds. I also tried on my original radio version, 32 and now have 28 and see no difference in GPS lock times. It will never lock on using Google Maps or iGuidance. In google Maps it says "seeking gps satellites (0)..." for about 5 min then says your gps receiver is having trouble tracking satellites etc. The only way I can get it to work is to use GPS Test, let it get a lock which usually take 5-10 mins, then close GPS Test and open either Google Maps or iGuidance and it will then work fine.
What is also strange is that when using GPS Test, the only way I can get it to work is to have the GPS info set to auto. It will scan then find the gps on com port 4 and 9600 baud. Then it will start up and try to lock on. The next time I run it it will already be on com port 4 and 9600 baud but won't find the gps device. I have to set it back to auto, and restart GPS Test, then it finds it.
There has GOT to be a way to fix the gps lock time on this thing. I have tried with A-GPS on and off and tried with quick-gps and saw no difference in lock speeds. Interesting thing though, I guess Google Maps will using cell tower location to identify where you are? When I use it without gps being turned on, or while it is searching for satellites, and I click "my location" it gets a fairly accurate location on the map.
It seems to me that the issue is with the com port and communication. Almost like the gps won't come out of sleep mode or something and gps test is the only program that can "wake" it.
Thanks for any info.
I am in the exact same situation as you. My TP fails to lock satelites 98% of the times i try.
I have read everything posted about TP GPS on this forum, i have tryed most ROM's and almost all available radio's, i have tryed most tweeks and all that in different set-up.
And after all that my GPS lock's rarely (2-5% of the times i try), and most importantly it doesent seem to be related to the radio nor to the ROM. At this moment i tend to think that i was unlucky with my TP that perhaps is from a lot of TP's with retarded GPS module.
From the forums it seems that most of the ppl dont experience this extrem problem with the GPS, it seems that most of the ppl around only experience laggy gps module update.
Atm i am still waiting for Elite RC3 hopeing that perhaps they'll bring a new gps driver, that will solve my problem.
In case Elite RC3 doesent help i will revert to stock hard-spl/radio/ROM and ill take it to the warranty service.
Sadly this problem with the GPS from my TP blackens my experience with it.
Are you guys sitting in your homes trying to get a lock? because then it is very unlikely you'll ever get a lock.
I have to go outside and wait about 1 minute to get a lock and then its fine. However, I DO have to use the HTC gps tool to get a lock before I can use google maps or any other gps program.
I am outside with no obstructions. I did find this app and may play around with it. So far I havne't been able to get it to get a lock unless I use GPS Test first.
http://www.geoterrestrial.com/gpstoday/
My Telus Touch Pro locks in 3-5 seconds every time after modifying the GPS and adding the correct IP settings for Telus' AGPS. This combined with OCN8 makes for an excellent GPS device.
The guide for the GPS hack was from this forum, just can't recall where.
I have the same problem with GPS Test as you all described. I am now running qsqa's PROven ROM and I noticed following: GPS Test often fails to start-up the GPS receiver, but VisualGPSce worked every time I tried. It is a free software, included in the PROven ROM. If u use a different ROM, you can download it from here: http://www.visualgps.net/VisualGPSce/default.htm
Give it a try, it sure helped me!!!!