Related
Hi,
I'm a newbie with android but have spent a lot of time the last few days reading the forums, and I can't seem to find any reasonable solution.
I have a Magic 32B from Vodafone germany.
So I started by following Cyanogens instructions...
. Install_the_Latest_Android_sdk
. Downloaded latest CM recovery
. Download the HTC Android 1.6 base image:
* http://www.androidspin.com/downloads.php?dir=enomther/ROM/&file=HTC_ADP_1.6_DRC83_rooted_base.zip
. Download the latest CyanogenMod ROM for your device:
* http://n0rp.chemlab.org/android/update-cm-4.2.3.1-signed.zip
. Put both of these files on your SD card
. Plug the phone into the computer
. Reboot into fastboot, and pressed back button until it appeared in a bar. Although for me it was Red not yellow.
. Ran fastboot boot cm-recovery-1.4.img
However I received the error of perfect SPLs. So I used the instructions from Amon_RA
http://forum.xda-developers.com/showthread.php?t=548218
Copied ROM v2.53.707.2 (Engineerings SPL v1.33.2010) to my GoldedSD card.
This completed successfully....However, when it boots in recovery mode I just see a black screen that says htc magic. And it stays there. Left it for about 10 mins and nothing.
I tried pulling the battery, it booted regularly and into Android 1.5.
So I thought I tried flashbooting CM-recovery1.4. Now the flashboot worked at sending over the cm-recoveryAgain, black screen just saying htcmagic.
Can someone please help me, my goal is to load a recovery rom, than install CyMod's Rom. I was following http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
For reference, before starting my "upgrade" the phone was:
sapphire unknown 32B ship s-on G
HBOOT-1.33.0007 (SAPP1000)
CPLD-10
Radio-2.22.19 26I
July 31 2009, 15:49:25
Running android 1.5
Now reads
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
Jun 2 2009, 17:27:03
Thanks in advance!
P.S. I forgot to mention, I also tried booting recovery mode without the SD card, and same result.
Can't boot recovery
Ok, can someone at least tell me why I can't boot a recovery image? Are there any reasons?
exactly the same is my situation
that gold card thing just messes things up i guess
now u have to flash a 32b radio and how and where u will get it i am also searching fr it if u get a solution leeme know or update the thread
Recovery image issue....Ok, it seems I figured out why the recovery didn't work.
As you may notice from the status, that image flashed the phone from:
sapphire unknown 32B ship s-on G
HBOOT-1.33.0007 (SAPP1000)
CPLD-10
Radio-2.22.19 26I
to:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
So you need a recovery that is now H not G. (like recovery-RA-magic-v1.3.2H.img)
Now recovery is available. So I followed CyM's instructions, just with this recovery image, Erase successful, and write successful.....Fastboot/recovery still working perfect, however telephone freezes on HTC screen during boot.
My thought is I should load an SPL that is G, fastboot RA's G image, then boot into recovery and re-load the CyGens ROM loads (as described).
Can someone with more experience let me know if I'm on the right track.....I was thinking of using RA's update.Engineering-SPL-HBOOT-1.33.2004-signed as I believe that is a G SPL (not sure), and where can we get a G radio?
IammenotyoU said:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.0010 (SAPP1000)
CPLD-10
Radio-3.22.20 17
So you need a recovery that is now H not G. (like recovery-RA-magic-v1.3.2H.img)
Click to expand...
Click to collapse
That is not correct! You still need to use a 32B recovery image => recovery-RA-magic-v1.3.2G.img
G = 32B
H = 32A
AmonRa, since I loaded
ROM v2.53.707.2 (Engineerings SPL v1.33.2010) from your thread, now my status during fastboot screen reads..H not G.
If i run fastboot boot recovery-RA-magic-v1.3.2G.img it just hangs at HTC screen.
If I run fastboot boot recovery-RA-magic-v1.3.2H.img, I get the recovery menu.
This is why I was thinking of somehow flashing an SPL that is for G, then the G recovery menu, than a G Rom.
So how can I get back to: SAPPHIRE PVT 32B ENG S-OFF G? And do I need to flash the radio, if so where can I find radio images?
Thanks AmonRa for your help and all the work!
@Amon Ra
i have the same issue as
@iammenotyou
my phone was
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPL-10
RADIO-2.22.19.26I
the above was the detail i wanted to downgrade it in order to root it so had to use the GOLD CARD method to bypass the model ID check as i had a perfected SPL
so now i have the following detail
SAPPHIRE EVT1 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP20000)
CPLD-10
RADIO-3.22.20.17
so the radio changed to 32a and also show H here after that gold card flashing
i try to use one click root method got flash rec 1.1.3
and i says
" PHONE TYPE IS EBI1/32A "
and try to flash some G recoveries like recovery-RA-1.3.2G.img
and reboot in try to get flash recovery console it stuck on the boot image saying HTC MAGIC while if i use a H recovery image i get the recovery console
now SIR what can be the solution of this problem
waiting for some experts opinion on this
Amon_RA said:
That is not correct! You still need to use a 32B recovery image => recovery-RA-magic-v1.3.2G.img
G = 32B
H = 32A
Click to expand...
Click to collapse
Look on the radio.. He needs a 32A recovery.
brick
Hi,
Well as I said, my unit was an 32B with s-on G. After I ran that package in fast boot it became a 32B ENG S-OFF H. Also the recovery images only the H images would work from this point forward. (which are supposedly not for my device)
So I went and tried to load the radio for the G (from HTC ion site) onto it and rebooted instead of also loading the SPL. So now its bricked. HTC logo screen for fastboot, recovery and regular boot.
So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G. (Although somehow I'm sure it can be restored, better safe than bricked. Now I just hope the service center can fix it)
SaQuibs: Best of luck....One thing you may wish to try since you've been changed to H like me, and can't boot the regular OS, is to fastboot RA's H recovery image, and than wipe and load an H OS like RA-IONv1.6.2H and see what happens. Since it doesn't include a new radio hopefully it will boot Again good luck!
the problem is not with the ROM 2.53.707.2
the problem is with the GOLD CARD coz i loaded a different rom
wat i did was loaded an H recovery and then loaded a 32b rom but it was stuck on boot screen
i have no plans to brick my phone as the country i live in there are no service centres of repairing places and HTC phones are not sold here we have to import and HTC gives no support as well
so planing to sell it
"So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G"
the problem is not with the rom its with the GOLDCARD method as i used a different ROM in the same thread
and what i did was i flashed an H recovery to get the console and flashed a 32b rom in it and phone was stuck at boot screen, so thought i bricked my phone but then again i created a GOLDCARD to get back to normal
so now dont want to experiment anymore
as HTC dont sell there phones in our country and so they do not provide any support for us either no center or repair places if bricked
"So I would suggest to anyone with a G unit not to use ROM v2.53.707.2 as that converted it from a G to an H even though the device was supposed to be a G"
the problem is not with the rom its with the GOLDCARD method as i used a different ROM in the same thread
and what i did was i flashed an H recovery to get the console and flashed a 32b rom in it and phone was stuck at boot screen, so thought i bricked my phone but then again i created a GOLDCARD to get back to normal
so now dont want to experiment anymore
as HTC dont sell there phones in our country and so they do not provide any support for us either no center or repair places if bricked
i have posted a thread also and i have also discussed here
sent PM to qtek and Amon_Ra and few other experts on the forum but didnt get a reply yet
lets c if they can figure out something fool proof and can be fixed its good or i will be selling the phone nxt week
Read this post and execute the part to revert back to the 32B radio and ROM.
The problem is NOT with the goldcard, because that works perfectly.
The problem lays in the fact that you don't know what you are doing, and you flashed a 32A NBH onto a 32B without even knowing what exactly you were flashing
maxisma said:
Look on the radio.. He needs a 32A recovery.
Click to expand...
Click to collapse
Yeah I was too fast, didn't read everything...
So by using the goldcard method you automatically end up with a "H SPL" and 32A radio? Or is there a way to around this, without manually reflashing another SPL and radio.
I have a Magic 32B with a perfect SPL and the goldcard method is the only way to go, right?
i cant install the fast boot
and is that risky?
and lastly with my current status of the phone which recovery can i use and which roms can i load
hacker1 said:
So by using the goldcard method you automatically end up with a "H SPL" and 32A radio? Or is there a way to around this, without manually reflashing another SPL and radio.
I have a Magic 32B with a perfect SPL and the goldcard method is the only way to go, right?
Click to expand...
Click to collapse
When you try to flash a NBH from another country/operator the CID check will fail and the flashing will stop. This is done so people can't just flash a rom from another country.
A goldcard (this is what engineers at HTC use) avoids the CID check (CID = Customer ID). This is the only reason why we use a goldcard, it has nothing to do with fixing a perfected SPL, or getting root, or whatever people tell you.
If you have a perfected SPL you can't use fastboot to flash or boot an image.
To fix this you will have to flash a non perfected SPL.
The only way to get a non perfected SPL is to flash an NBH that contains a non perfected SPL.
The problem is that we only have a few NBH's available that contain a non perfected SPL and a CID from another country/operator.
Unfortunately they are also for 32A devices and not for 32B devices.
This is the only reason why you need to get around the CID check and why you "upgrade" to 32A, and afterwards downgrade back to 32B once you have a non-perfected SPL.
If you have a 32A with a perfected SPL you'll only need a goldcard if your CID is different than the one of the NBH you are flashing, you'll also have no issues with a different radio because the NBH is for a 32A already.
If you find an 32B NBH with a non perfected SPL you'll also not have the different radio problem and you might not even need a goldcard if the CID is the same as the one in your phone.
Please be aware that you don't need to fix a non-perfected SPL to get root.
At the time that I wrote the SPL fix we didn't know about kernel exploits so we used this way to get root. In the mean time other ways are discovered to get root (like flashrec etc..). Those methods will however not fix your SPL so you will still not be able to use fastboot to erase, flash etc.
It's always easier to have an open SPL so you easily use fastboot to flash stuff to your phone.
You can also change the CID in your phone to a super CID (all 11111), when you have a super CID you can flash anything you want and you'll never need a goldcard. Changing the CID is something for another thread
Hope this makes things more clear
@Amon Ra
things are crystal clear the problem with me is i coundnt configure that fastboot thing i followed the instructions on android site but could not install the sdk tool and use fast boot
so just wanted to as that if i use an H recovery to get to the recovery console will it work for me can i flash new ROMs
coz i am already tired dont want to experiment any more
Hi all,
I thought I would start a separate thread for everyone to get the proper instructions on how to upgrade to the new 6.35 radio and 1.76.2007 SPL.
Too many people are confused on the directions for upgrading. I want people to be happy with modding their phones, not angry with me.
If followed exactly, these directions will help with the issue a lot of users are having.
THIS IS FOR 32A MAGIC/SAPPHIRE ONLY!!!
IMPORTANT NOTES (THANKS XAUEIOUS!)
xaueious said:
For everyone who is flashing to 1.76.2007 and getting S-ON in their HBOOT,
http://forum.xda-developers.com/showthread.php?t=643291
They should know that they need to use the command "fastboot enableqxdm 0" to get S-OFF back with that SPL. This information should go in your SPL + radio update post.
Also, ezterry and lbcoder confirmed the reason of SPL+radio flash bricks, and is suggesting a way to flash the SPL+radio to avoid bricks. :
http://forum.xda-developers.com/showthread.php?t=655097
In short, wipe the system and boot partitions in addition to recovery, and end with the command "fastboot reboot-bootloader"
Click to expand...
Click to collapse
Upgrade to 6.35.10.18 Radio and 1.76.2007 SPL
Prerequisites:
- HTC Magic / Sapphire 32A
- Engineering SPL
----- 1.33.2005
----- 1.33.2009
----- 1.33.2010
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
- Working ADB/Fastboot Drivers
- Basic knowledge or modding your phone
You will need:
- The 1.76.2007 SPL HBOOT image
http://www.theandroidkitchen.com/fileshare/Sapphire-32A-Updates/?download=hboot-1.76.2007.img
- The 6.35.10.18 Radio Image
http://www.theandroidkitchen.com/fi...es/?download=Radio_HTC_PVT_32A_6.35.10.18.img
- The Amon_RA Hero Recovery (Latest version is 1.5.2 as of this post)
http://forum.xda-developers.com/showthread.php?t=561124
MD5SUMS - thanks march83!
hboot-1.76.2007.img 841eebbffaead7296a50a39920ec30a2
Radio_HTC_PVT_32A_6.35.10.18.img 246a858689a19975bfdcfa5538401c5f
Notes:
- This Radio and SPL is only for the new Sense UI ROMs (CursorSense32A)
- The Hero recovery is required for the new radio. The Sapphire H (Magic 32A) recovery will reboot after a few seconds.
- To select items using the Hero recovery, you need to use the green Talk/Send key on your device. The trackball select key will not work.
Steps:
- Download the files above onto your computer. Save them in the same folder (C:\AndroidSDK\Tools for example)
- Turn off your phone
- Power it on into recovery (hold Home and press Power)
- Run a full nandroid backup (optional, but recommended)
- Turn off your phone
- Power it on into FASTBOOT mode by holding Back and pressing Power
- Plug in a USB cable. you should see FASTBOOT USB on the screen
- From a command prompt, navigate to the folder where you saved the files above.
- Type in these commands:
Code:
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
- Your phone will reboot back into FASTBOOT.
- Verify that you now have the 6.35.10.18 Radio and 1.76.2007 SPL.
CONGRATULATIONS! You can now flash the CursorSense32A ROM!
There will be other ROMs soon that use this Radio and SPL. It's just a matter of time.
Upgrade from 6.35.07.29 to a new version
You can upgrade radio version from 6.35.07.29 to 6.35.08.29 or 6.35.10.18 without wiping, reflashing or losing any data.
- Download the radio image
6.35.08.29
6.35.10.18
- Save the radio update.zip file to the root of your SD card.
- Boot into Recovery mode, using Home and Power and apply the update like you would any other update.zip file.
Downgrade (Revert back to) 32A 3.22 Radio and SPL
You will need:
- 1.33.2010 Engineering SPL HBOOT image
http://www.theandroidkitchen.com/fileshare/Sapphire-32A-Updates/?download=hboot-1.33.2010.img
- 3.22.20.17 Radio image
http://www.theandroidkitchen.com/fi...es/?download=Radio_HTC_PVT_32A_3.22.20.17.img
- Amon_RA Sapphire H Recovery (Latest is 1.5.2 as of this post)
http://forum.xda-developers.com/showthread.php?t=530492
Steps:
- Download all of the files to the same folder (C:\AndroidSDK\tools for example)
- Turn off your phone
- Power it on into FASTBOOT by holding Back and pressing Power
- In a Command Prompt, navigate to the folder you saved the files in
- Type in these commands:
Code:
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
fastboot flash hboot hboot-1.33.2010.img
fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img
fastboot erase system -w
fastboot reboot-bootloader
- Your phone will reboot back into FASTBOOT
- Verify that you now have 3.22.20.17 SPL and 1.33.2010 SPL
If you have any issues at all, please report them in this post. If you failed to read this post and expect help from any of the community members, expect to be royally flamed!
Happy modding!
Thanks to:
Amon_RA for the Recovery image and the "Take Me Back" steps
MoDaCo for finding the 1.76.2007 SPL for Hero that also works on Magic!
Great work
Well done Cursordroid
These instructions were great, the old ones forgot about the send button to activate in recovery and the reboot-bootloader at the end was helpful.
Thanks
cursordroid, you have my eternal respect
Thanks a million for your support and for this thread also. I think I've read every single thread here in order to get familiar with android and what the hell is that I'm doing.
Nice job. Also, thanks everyone who is working in order to deliver high quality roms and apps.
Thanks.
Thanks main , i have flashed Radio and spl now. waiting for flashing to CursorSense xD
Hi
Maybe a verry a dumb question....but i want to ask it anyway.
I was wondering if there is another way to update the radio and SPL.
I only have Windows 7 and as far as i know there are some little problems with htc drivers and android sdk and i really don`t want to brick my phone.
Can`t we update them with Amon RA`s recovery just like we do with a new rom? (by pressing power and home button and renaming this files to update.zip and apply them?)
emin3sku said:
Hi
Maybe a verry a dumb question....but i want to ask it anyway.
I was wondering if there is another way to update the radio and SPL.
I only have Windows 7 and as far as i know there are some little problems with htc drivers and android sdk and i really don`t want to brick my phone.
Can`t we update them with Amon RA`s recovery just like we do with a new rom? (by pressing power and home button and renaming this files to update.zip and apply them?)
Click to expand...
Click to collapse
I did most of this from Windows 7 the first time I flashed.
You don't have fastboot mode with Windows 7?
That is a good thing to know (that we can update radio and SPL under Windows 7)
I will search for adb and drivers for my Magic and then ...... CursorSENSE 0.8
Only one question:
I have
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.222.20.17
JUN 2 2009,17:28:28
Can i update the radio on my magic or do i need an Engineering SPL first?
emin3sku said:
That is a good thing to know (that we can update radio and SPL under Windows 7)
I will search for adb and drivers for my Magic and then ...... CursorSENSE 0.8
Only one question:
I have
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.222.20.17
JUN 2 2009,17:28:28
Can i update the radio on my magic or do i need an Engineering SPL first?
Click to expand...
Click to collapse
You need an Engineering SPL first.
I have
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.222.20.17
JUN 2 2009
Where I found eng spl and how install on my magic ?
I have found these
Engineering SPL 1.33.2010
Engineering SPL 1.33.2009
Engineering SPL 1.33.2005
Engineering SPL 1.33.2004
here:
http://forum.xda-developers.com/showthread.php?t=529019
Any ideea wich one to use?
And by the way..thanx for such quick and accurate answers
Help please
hi i have a htc magic with myhero rom
Specs :
HTC SAPPHIRE PVT 32A
HBOOT 1.33.0008(SAPP10000)
CPLD 12
RADIO 3.22.20.17
I was trying to update da radio and spl but it gives me an errormessage image attached can anyone help me please
Hello,my SPL info:
Code:
SAPPHIRE PVT 32A SHIP S-ON H
H-BOOT-1.33.0009(SAPP10000)
CPLD-12
RADIO-3.22.20.17
When i flash your radio,some error come.
E:\flash>fastboot flash radio radio.img
sending 'radio' (21376 KB)... OKAY
writing 'radio'... INFOsignature checking...
FAILED (remote: signature verify fail)
Now,i found the way to slove this problem.
If your SPL is 0009 S-ON,you must update it to Engineering SPL 1.33.2010 first.
I fount the SPL here:http://forum.xda-developers.com/showthread.php?t=529019
cursordroid: Is there any advantage in using the upgraded radio? (Other than to run your ROM) Thanks!
Update: Sorry about it. didn't read closely the first time round.
Please help
Guys - every time I try to flash the CursorSense 0.8 ROM from the Recovery menu, my device goes into this infinite loop of rebooting....or, it will just lock-up in Recovery after a few second - and I can't do anything. If I'm lucky enough to be able to click on the "update from ZIP" menu and then select the CursorSense 0.8 ZIP file, the device just goes into an infinite loop of rebooting on me forever!!
here is what I have....I believe that I did everything correct when I upgraded. I came from a very old Recovery (6+ months old) but all the updates from the instructions I found here in this thread went perfectly. Could someone PLEASE point me in the right direction? I would be GRATEFUL!
Sapphire PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP50000)
CPLD-12
Radio-6.35.07.29
Aug 21, 2009, 18:19:15
Anyone? Thanks SO much!
UPDATE
OK - so after stopping to eat breakfast and get my head together, I realized I was NOT using the HERO version of the Recovery file. So - I re-did the steps with the HERO version of the recovery, and now at least I don't lock-up or reboot when in the recovery menu.
NOW - when i attempt to run the update with the CursorSense 0.8 ROM, it starts to find and open the package (as normal) - but then about 5 seconds into this, it stops, and the screen returns right back to the main "Recovery" menu. When I try to do it again - the same thing happens.
I'm ALMOST there...! Any suggestions on this last issue as to why the update process starts...and then abruptly stops and goes back to the main recovery menu?
Thanks again!!
UPDATE # 2
So - NO - I'm really not an idiot...but for some reason, I decided to walk through all the steps in this thread again (except for the radio update because it was done already) - and now it all WORKED! The one extra step I took was wiping my SD card (which was a basic card with NO extra partitions and I have used it to flash dozens of other ROM's without an issue) and started from scratch with that too, just in case. Well, it worked!! I just installed the CursorSense 0.8 ROM successfully and it is booting now (nice Nexus boot screen BTW).
So - thanks for letting me vent and ask for help on this thread...it made me double and triple check a few things, and bam! I got through it.
As always - this forum and you guys are ridiculously amazing!
Happy holidays
I have a stupid question, will I lost everything after upgrade to this radio and SPL?
lwclam said:
I have a stupid question, will I lost everything after upgrade to this radio and SPL?
Click to expand...
Click to collapse
only upgrade radio and spl,you won't lost any data.
Hey Guys
Just wondering, when you run the "full nandroid backup", do you use the recovery for the magic or the one you download for the hero?
Sorry if this seems a rather simple question to many of you, I'm brand new to this.
Thanks for any help
Sam
guaiwujia said:
only upgrade radio and spl,you won't lost any data.
Click to expand...
Click to collapse
Thanks.
I'm using myHERO ROM, any harm to this?
Hello i've
Sapphire PVT 32A
HBOOT-1.33.2005
CPLD-12
RADIO-3.22.20.17
i want to know what is last radio firmware that runs on my phone with cyanogenmod 4.2.12.2 rom.
cyanogen think it solves my 3g disconnection problem. It writes me:
3g data disconnection
http://code.google.com/p/cyanogenmod/issues/detail?id=984
Please try re-flashing the current radio for your device, even if it's
already at 2.22.19.26i (for 32b) download the top file here:
http://code.google.com/p/sapphire-port-dream/ flash it like a normal
update.zip, reboot to see the box->phone, and reboot again once it dumps
you back in recovery. I'm not sure if it's crappy EEPROMS or what, but
re-flashing the radio has been shown to fix bt/gps/wifi/3g/audio/etc. issues.
There is a newest radio for 32A... Remember that Cyanogen does the CM for 32B devices so he actually answered your question regarding that device...
Well here's the latest radio for the 32A devices and the instruction to install it...
RADIO 3.22.23.18:
http://www.4shared.com/file/176873890/399c9312/Radio_HTC_PVT_32A_3222318.html
In fastboot you have to put this commands:
fastboot devices (to check if your device is recognized)
fastboot flash radio *\radio.img (*= path of the Radio.img file)
Remember that you have to use the same name of the radio.img file (You can rename it for an easy way to install it)
:No-Frost: said:
There is a newest radio for 32A... Remember that Cyanogen does the CM for 32B devices so he actually answered your question regarding that device...
Well here's the latest radio for the 32A devices and the instruction to install it...
RADIO 3.22.23.18:
http://www.4shared.com/file/176873890/399c9312/Radio_HTC_PVT_32A_3222318.html
In fastboot you have to put this commands:
fastboot devices (to check if your device is recognized)
fastboot flash radio *\radio.img (*= path of the Radio.img file)
Remember that you have to use the same name of the radio.img file (You can rename it for an easy way to install it)
Click to expand...
Click to collapse
correct me if i am wrong but that radio needs the new spl to work. and by installing both spl and radio, CM wont work.
I think I might have some issues with the radio (described here)
What is the latest radio version for my SPL?
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009,17:27:03
Thanks
str4vag said:
correct me if i am wrong but that radio needs the new spl to work. and by installing both spl and radio, CM wont work.
Click to expand...
Click to collapse
CM running fine with Engineering SPL 1.33.2009 and Engineering SPL 1.33.2010
Running CM 4.2.12.2 on my 32A with Engineering SPL 1.33.2010 and RADIO 3.22.23.18 without any problems at all.
str4vag said:
correct me if i am wrong but that radio needs the new spl to work. and by installing both spl and radio, CM wont work.
Click to expand...
Click to collapse
Look at my Signature ... The Radio that needs a new SPL is the 6.* radio... This one works fine with ENG SPL...
i'm using Radio 3.22.23.18 and i've an issue with cm4.2.12.2.
When phone resume after standby, phone losts 3g data connection.
Do you have same issue?
how i can solve? thanks.
Nope... Never had that problem...
Hi!
My magic is 1.33.0006 (Vodafone Spain) so is a Perfect SPL, I have been reading about the different ROMs and some of them need a different SPL, my question is:
If I rooted my magic (was shipped with version 1.5) and now I have installed the Cyanogen 4.2.13 and the RA Recovery 1.5.2G, Do I need the goldcard to change the SPL and the radio version? or with just entering in the recovery mode is enough?
Thanks in advance,
rex2k1
rex2k1 said:
Hi!
My magic is 1.33.0006 (Vodafone Spain) so is a Perfect SPL, I have been reading about the different ROMs and some of them need a different SPL, my question is:
If I rooted my magic (was shipped with version 1.5) and now I have installed the Cyanogen 4.2.13 and the RA Recovery 1.5.2G, Do I need the goldcard to change the SPL and the radio version? or with just entering in the recovery mode is enough?
Thanks in advance,
rex2k1
Click to expand...
Click to collapse
Yeah. Entering recovery mode is enough
Goldcard method is basically avoid region check (if you will flash official ROM, that isn't for your country). In some times GC may used when flashing .nbh to get rooted.
i still am confused about the PERCECT SPL, which I have (.0006) is this SPL good enough for flashing new ROMs, I completed the 1 Click ROOT with no issue flashed the latest Cyanogen ROM, but I wanna try a HERO rom, its kinda why I got a Android Device. This SPL stuff is actually confusing me, five years for HTC devices I have never had an issue or really been confused on what to do, there is a first time for everything.
If i do need to change my SPL, which should I goto? I would like tjust to leave it alone and contine to FLASH on, cause I've been waiting for weeks to get an Android device and flash awaY!!
THANKXXX
actually I think I found a thread just above this one that answered my question, but if anyone want to confirm the correct idea, thatn that would be cool, but I m gonna go ahead and upgrade to SPL: Engineering SPL 1.33.2010 BUT i would like to be sure thats what i need to do, i would like to keep my NO BRICK record intact
SPL recommended
Hi,
Thank for your answers, I'm thinking to change the SPL but I'm not sure which one use, Is the same Danger SPL and the one posted in the sapphire-port-dream website in google (I can't post urls) as latest? If I flashed this SPL will I be able to install all the ROMs that need different SPL? or is better a Engineering version like Engineering SPL 1.33.2010 (I'm confused about the differences).
My magic is SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0006 (SAPP10000)
CPLD-10
RADIO-2.22.1926I
Also I want to ask, if I flash the new SPL (if the versions above are compatible with my phone), Will I need to re-flash again the Cyanogenmod version (or the ROM that I choose)?
Thanks!
rex2k1
rex2k1 said:
Hi,
Thank for your answers, I'm thinking to change the SPL but I'm not sure which one use, Is the same Danger SPL and the one posted in the sapphire-port-dream website in google (I can't post urls) as latest? If I flashed this SPL will I be able to install all the ROMs that need different SPL? or is better a Engineering version like Engineering SPL 1.33.2010 (I'm confused about the differences).
My magic is SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0006 (SAPP10000)
CPLD-10
RADIO-2.22.1926I
Also I want to ask, if I flash the new SPL (if the versions above are compatible with my phone), Will I need to re-flash again the Cyanogenmod version (or the ROM that I choose)?
Click to expand...
Click to collapse
Mmm... 1.33.2005 (Haykuro Danger SPL) is most popular SPL for 32B-devices
Devs recommend it to flash before flashing their ROMs.
Usually, you don't need to re-flash ROM
Hi, I have a T-mobile 32B with perfect SPL and my friend helped me to install new SPL:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP******)
CPLD-10
RADIO-3.22.20.17
Jun 2 2009,17:27:03
Click to expand...
Click to collapse
Now I have big problem : keyboard map is incorrect and don't have home button (original T-mobile phone don't have search button) and I can't go to recovery. Now I want update to any SPL which support Tmobile phone button correctly and I want have root.
Please help me, I'm trying google it too.
Please help me, please please please
... I thought it was usually bad to have a 3.x radio on a 32B.
Can you still fastboot?
(It's possible he could have clearly flashed the wrong SPL on it)
kbeezie said:
... I thought it was usually bad to have a 3.x radio on a 32B.
Can you still fastboot?
(It's possible he could have clearly flashed the wrong SPL on it)
Click to expand...
Click to collapse
Yes, I can use fastboot and flashed recovery
I don't know why our dev doesn't post SPL with radio, as I know each SPL come with a radio, if you use fastboot flash correct a pair without reboot between flash them, your device never bricked
i thought it was currently not possible to root the.010 perfected spl
be it 1.76.0010 or 1.33.0010
how did you do it
i have a new g1 that has 0010 and would like to root it
You must have a goldcard and you will be able to upgrade to any nbh file for G1. (I have a devphone nbh, I will find it and share)
excellent, thank you
please advise when you have found it
in the magic forum there is a post making a gold card
can i follow those instructions?