hey i am running a ROM called PC_ProV20 6.1 its very good.
but when it comes to aligning the screen it doesn't work, the device just gets stuck at the screen and no matter how hard you push on the X it doesn't work. i know there isn't anything wrong with the phone itself because when i had Wm 6.5 the align screen worked perfect (this was about an hour ago).
I would be very grateful if someone could help me fix this issue. thx
Related
Hi,
I've just received my TyTN today and I'm not very satisfied concerning the touch screen.
I don't know what is happening but the touch screen does NOT respond properly. I've tried to clean it a bit, but the result remains the same.
When I want to use the screen keyboard, it's horrible. I point the letter A and the screen understands that I'm touching the letter under or the letter just near the "A". It's pretty impossible to write a text properly and very hard to open programs or browse with the touch screen.
Of course I've tried to align the screen. It's working without any problem then.
But after some times, opening apps, closing others (using normally the pda inf act), the problem comes back... the TyTN does't really understand where I'm touching the screen.
Then I make a screen alignement, and it's working back... It's just amazing
I don't think it's a hardware problem because the alignement is working after an align screen.
Maybe it's a known error ? Has somebody the same problem ??
Is there a rom update to fix that ? Or is it a problem of my own HTC ?
Thanks !
Can you help me please ?.
Hi,
I don't have this issue with mine...
Check the "TnTN/v1604 problem" topic maybe
I had the same thing, once, with my variO. Probably I pushed too hard onto the screen while cleaning.
Actually, this is a known problem with some of the first shipment devices. Look at the other TyTn topics i this forum.
Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!
guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.
Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??
go search for remotecalibration.exe
hello
i got my polaris for 3 days: everythig ok until i applied the screen protector (i think there started my problems):
first simptom - touch screen with response problems, than not working at all! (yes i removed the screen protector)..i hoped that maybe it is a software problem.
i have tried using it with the buttons - manged to lock the keypad
so after searching the net i found the way to "hard reset"...but that needed both gps and IE buttons pressed.... locked
Next step: i found this forum ..searched for any similar problems..no luck
Tried to flash the ROM using both bepe and udK (bittdefender found "Trojan.Qhosts.AQP" in udK release ) tools. Both tools stucked at 0%.
Another tool needed EnterBootloader.exe to run on my PPC. but without keys/pen i could not install it, so i put the a command for program in my Startup tasks on the PPC.
Now the ppc starts and then goes in the 4 colour mode. I'd tried to install/flash the ROM again..no luck stucked at 0%.
Can anyone help me?? could it be a software problem? or maybe it.s a hardware problem. (i gor no response from the touch screen since)
Thanks!
P.S. Sorry for my english..hope u understand my problems
One question: did you use water or something else to place the screen protector on your device?
Return it asap!!
I used some glass cleaner (foam)..but the screen was dry and clear when i put the protection.
The phone is in service now...(repair..if not a new one)..
I think you may have damaged the digitiser when applying the screen protector. Possibly the ribbon was only just making contact and your pressing on the screen has dislodged it enough to stop it working.
Hi everybody!
I'm having problems with my Pocket PC.
It all begun a while ago, when a part of my screen stopped working (didn't respond to touches). So I did a hard reset. Then, it wouldn't pass the Align Screen procedure. So I made a file on the Pocket PC root folder called welcome.not - and it worked, the welcome screen was bypassed.
Now, however, everything on the screen is mirrored. Not the image on the screen but the response to my touches. So when I press the upper right corner with my stylus, it reacts in the lower left - and reverse, across the whole screen.
What I want now is of course a state like before the hard-reset. I can accept a part of the screen not working, but I want something at least to be useable.
I think this would be easily fixed by just running Align Screen, but that doesn't work - it gets stuck in a infinite loop.
Maybe there are some Align Screen "profiles" to place in the windows folder/registry?
I'm using a HP iPAQ 214 Enterprise.
Randor244
might it be a ROM problem?
Maybe, though I think the problem is that the screen is completely unaligned and therefore is totally wierd.
What I think I need is:
1. An application to browse the PPC registry from a desktop PC
2. Sceen align data to put in in the registry (I've read somewhere else that that data is stored in the registry)
Or, maybe I'm wrong
In case it is a rom problem, can I solve it easily in any way?
well to be honest, the first thing i'd do is switch a ROM... unless it's a ROM you got from XDA and is well-known..
if the rom switching doesn't work, i'd download a pda control app like MyMobiler or SOTI Pocket Controller to fix this. maybe you have hardware problems with your screen..
I don't know where the screen alignment data sits in the registry but i'm sure you can find it on this forum. if you manage to change and it still doesn't work... maybe replac ea screen? there's a marketplace section in which you might be able to buy spare parts.. and there are guide on dismantling so you can replace the screen yourself
well to be honest, the first thing i'd do is switch a ROM... unless it's a ROM you got from XDA and is well-known..
Click to expand...
Click to collapse
Well, I havn't got much knowledge on how to do these things... Could I get a brief explanation?
I know what ROM is and so on... but how to switch it... hmm...
I'm sorry, can't help you with that.. i'm not familiar with the iPaq... but I understand that you never switched a ROM so it's probably the original one.. and you shouldn't have a problem with it.
try aligning your screen using the registry.. if it doesn't work.. i'd go with replacing a screen.
Yeah, I would also like to align the screen using the registry - but how? I need to know some values to input, right? And as far as I know they need to be specific for my model
So how?
maybe you can contact HP and ask them?
Hi all,
I bought a second hand Raphael on eBay. The previous owner said he flashed WinMo 6.5 and a HardSPL. Something seems to have gone wrong somewhere, because WinMo starts up and shows the welcome screen and then the touchscreen alignment dialogue over and over. As soon as I touch all five points, the alignment process starts again.
I have already re-flashed WinMo 6.5 an 6.1 with the same results. I have also added a WELCOME.NOT file and tried a soft reset. The file just disappears after the reboot.
The boot loader says as version numbers:
R 1.14.25.05
R 52.63.25.34u
D 5.00.00.00
I'd be glad for any pointers. Maybe a pre-calibrated rom?
Also, I actually want to run Android on the little fellow. Could I just try to flash LightNHB and run Android from there?
Thanks for your help.
Regards,
Kevin
That's not the bootloader screen numbers, but I don't think that's the problem. It may just be a crappy rom on there. Getting to the alignment screen is a good sign that the device isn't bricked. I would say just flash another rom; use one of the android-starter roms if that's what you want on there.
Thanks for the answer, unfortunately it seems the touch screen is broken
I managed to install Android using LightNHB, worked a treat. Androids calibration screen seemed to take all five poinst, but the coordinates it printed out where all on the same y-coordinate. The touch screen doesn't work in Android after that (I mean, how could it ).
I'll have a look around to see if I can buy a new screen for cheap.