Treo 750 not connecting to PC nor SD Card. - Palm Treo 750

Hi People, I`ve upgraded my Treo 750 (both Hard SPL, and 6.5 23017), and after I finished the process my Treo did not connect to 3G, only to GPRS, maybe that happened because I`m in Brasil using Claro as my Carrier, so I tried to downgrade back to 6.0, but it can`t connect to the PC (which i could do with 6.0), and it can`t access the SD card (FAT32), even the bootloader can`t find the 6.0 .NBH which is in there, so if anyone knows how to fix this, it`ll be great.
Thanks.
The bootloader is the 1.40, but i can`t change it since i cannot connect to the PC
I`m using Windows 7 if it`s any help.

Related

Imate Jam Dead When Upgrading to 1.11

My Jam stopped half way through the upgrade. Now it shows USB V1.00 when connected. But on retrying the upgrade it gives country ID error. Somebody please help as I have important file on Storage that I forgot to backup.
With an interrupted upgrade, the files are already gone. what you now need to do is ensure that you have disabled the usb connection in activesync, remove and reconnect the usb connection and retry the upgrade.
Finally If you have an imate ROM and you are installingthe imate ROM upgrade, there is no reason why you should have a country code problem.
rgds
jim

Helmi's AT&T Rom Won't Let Me Use Activesync

Everytime I connect my PC to the phone via USB cable, I get a message from XP saying,
"USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Activesync never goes green and I can't flash my phone to a more stable ROM. I just got my TILT 2 days ago and really don't want to be stuck with such a slow ROM. I flashed the phone to the HTC AKU bigstorage ROM before this and everything worked fine. It's just when I tried to flash to the AT&T Rom did I run into this problem.
Any help will be much appreciated. Thanks.
Have you tried rebooting your PC?
If rebooting the PC doesn't do it you may need to completely re install activesync itself. Worked for me....
I reinstalled activesync and now it works.
BTW, is there a way to stop Activesync blinking my programs in and out from being selected on my PC?
setting -> connections ->usb to pc -> uncheck a mark. this should help.
the best idea - change rom to htc, faster, more relible, no sync problems.

HELP :( - bootloader stuck

hello all,
i have no idea what has happened to my universal (imate jasjar)
i started upgrading to a new ROM, and then it got stucked on the bootloader. it only shows
USB (when connected to usb, or serial if not), V0.6 on the bottom of the screen.
i tried the ulock of the bootloader, (light, softrest, power), exitbootloader, but nothing worked.
when trying to use mtty it gives me an error (can not open usb).
i am using vista.
any help will highly appreciated
thanks a lot in advance
cheers
just to add one thing,
I NEED MY PHONE BACK.
pleeaase help me
I also got that USB-port problem trying to use mtty and UNI_exitbootloader.exe thoug i had disabel the USB-port in WMDC(I am using Vista ) so I tried a PC with XP and activesync. Same Problem. Then I tried to remove activesync. Same Problem.
Then I tried a PC with XP but where activesync had never been installed at. And this worked. Now I did see the USB in port menu in mtty.
Sara
sarasera said:
I also got that USB-port problem trying to use mtty and UNI_exitbootloader.exe thoug i had disabel the USB-port in WMDC(I am using Vista ) so I tried a PC with XP and activesync. Same Problem. Then I tried to remove activesync. Same Problem.
Then I tried a PC with XP but where activesync had never been installed at. And this worked. Now I did see the USB in port menu in mtty.
Sara
Click to expand...
Click to collapse
hello sara,
thanks a lot for ur feedback, unfortunatly, i don't have xp now. i will check out tomorrow.
thanks
replace your cable...i had the same issues and that solved them. hope it helps.
Use XP, disable ActiveSync and then connect USB to your PPC. Mtty will show USB. I did it thousand times. Tested and working!
Vista and ROM upgrading ... they don't mix.
For upgrading your ROMs or doing any such thing to your Uni, use XP.
Search the forum, there shoulod be post somewhere with the XP USB drivers attached, if I remember correctly, replacing the Vista drivers with those will probably solve the problem, but with Microsoft, you can never be 100% sure...

connecting to home network

ok i just went from 6.1 to 6.5 , can connect to wifi with either , had no problems connecting to my home network with 6.1 tryin with 6.5 and it cant find my pc , can anyone tell me a step by step guide of how to do this ??

Uprom 6.1 for imate 8150

I just downloaded ROM but can't upgrade my imate 8150 because it keeps "trying to connect to device..." I already set up sync to pc via windows mobile device center on vista. Any idea? Tks
I hope your not trying to upgrade your 8150 with ROMs from the Wizard forum, if you get it to upgrade you will probably brick your phone.

Categories

Resources