Database Info

IMEI not verified. .

Hi,
I purchased my N8000 from dubai last week from airport. After reaching home, I went to www.imei.info and entered the imei # just to verify but web site tells me nothing rather a messae TO CONTACT YOUR SUPPLIER ... then I connect it with kies and kies recognised the n8000 and also came to my notice that my note is basically smuggled from IRAN though I purchased it from dubai.
So please tell me is it ok... and if i flash an another country rom e.g UK thru odin..
Would that create any issue in future...
Regards
Sent from my GT-N7100

Anyone from IRAN can able to verify imei number of their N8000 from www.imei.info ?
Sent from my GT-N7100

I am in Dubai and my N8000 doesn't show up on www.imei.info either. I just get a message saying "Not Found" - Nothing about Contacting supplier
Everything shows good in Kies. So how did it "come to your notice that your note is basically smuggled from IRAN" ?
Flashing another ROM such as UK should be fine, but will prevent further OTA updates because of CSC mismatch between the device and the firmware.
The 4.12 UAE ROM has been released and can be found at http://www.sammobile.com/firmware/?page=8&view=10851
I would download that one and save it so that you can always revert to stock. Then flash what you want.

Bulbous said:
. So how did it "come to your notice that your note is basically smuggled from IRAN" ?
.
Click to expand...
Click to collapse
Thru kies... it shows the csc code is THR that means my n8000 was destined for iran and some how end up in dubai
Sent from my GT-N7100

Today I checked again imei and it shows the details N105 instead of N8000... don't know what to say. ..
Sent from my GT-N7100

max621 said:
Thru kies... it shows the csc code is THR that means my n8000 was destined for iran and some how end up in dubai
Sent from my GT-N7100
Click to expand...
Click to collapse
Or firmware has been flashed on it .
Use another IMEI checker site .
jje

JJEgan said:
Or firmware has been flashed on it .
Use another IMEI checker site .
jje
Click to expand...
Click to collapse
As far I understand kies only recognise the device if product code matches with csc... and my n8000 recognised by kies
Sent from my GT-N7100

max621 said:
As far I understand kies only recognise the device if product code matches with csc... and my n8000 recognised by kies
Sent from my GT-N7100
Click to expand...
Click to collapse
Kies always recognises the device. It only shows it as updateable or official if the product code matches the CSC

max621 said:
As far I understand kies only recognise the device if product code matches with csc... and my n8000 recognised by kies
Sent from my GT-N7100
Click to expand...
Click to collapse
If the HDSWVER codes match a firmware on the update server is the key .
Example I9300XXALF2/I9300OXAALF2/I9300XXLF2/I9300XXALF2 found in the registry current user samsung . Wrong HDSWVER code here then delete the key .
If non original firmware has been flashed then as said CSC Product code etc may not match .
Usual is Kies has no update as their is no update for that phone as people imagine updates are released wholesale .
jje

Check your IMEI number here http://imei-number.com/imei-number-lookup/

Bulbous said:
Check your IMEI number here http://imei-number.com/imei-number-lookup/
Click to expand...
Click to collapse
Thanks mate... the web address given by you... verified the imei...
BTW thru serial number its also verified that my n8000 was destined for Iran and I also called a friend in dubai and his n8000 serial # also belongs to iran..
http://forum.xda-developers.com/showthread.php?t=2088809
So its look like that the Iran shipment somehow ends up in Dubai..
Now I need to flash European Rom... would anybody recommend the best/stable 4.1.2 rom...
Thanks..
Sent from my GT-N7100

max621 said:
Thanks mate... the web address given by you... verified the imei...
BTW thru serial number its also verified that my n8000 was destined for Iran and I also called a friend in dubai and his n8000 serial # also belongs to iran..
http://forum.xda-developers.com/showthread.php?t=2088809
So its look like that the Iran shipment somehow ends up in Dubai..
Now I need to flash European Rom... would anybody recommend the best/stable 4.1.2 rom...
Thanks..
Sent from my GT-N7100
Click to expand...
Click to collapse
As you say, probably destined for Iran, but Samsung thought better of shipping to a country that is subject to lots of sanctions. Trust me, getting a bad name on one of those lists is a whole world of hurt. Coca Cola got blacklisted by not closing their plant in Somalia a few years ago - their still on it.
The UAE ROM contains the CSC for Iran (THR) so you wouldn't have to change it and do a factory reset

Q/A Codes not working on I535 Verizon

I just bought a Samsung Galaxy S3 Verizon and was testing it.
Then I realized not a single hidden/Secret Code like : *#0# , *#06# , *#*#4636*#*# are working all.
Then I downloaded Anycut.apk to open "Testing mode" with a shortcut but it's not working too. It's showing "Application Not Installed"
Any Help????
Android Version : 4.4.2
Baseband version : I535OYUDNE1
Kernel Version : 3.4.0 [email protected] #1
Build number : KOT49H.I535VRUDNE1

I
Aqib Ayub said:
I just bought a Samsung Galaxy S3 Verizon and was testing it.
Then I realized not a single hidden/Secret Code like : *#0# , *#06# , *#*#4636*#*# are working all.
Then I downloaded Anycut.apk to open "Testing mode" with a shortcut but it's not working too. It's showing "Application Not Installed"
Any Help????
Android Version : 4.4.2
Baseband version : I535OYUDNE1
Kernel Version : 3.4.0 [email protected] #1
Build number : KOT49H.I535VRUDNE1
Click to expand...
Click to collapse
I've been seeing this a lot. They were more than likely disabled by Samsung as they were codes for technicians not for the general public
I was able to bring up one code, *#06# which shows you your IMEI, however the other two don't work. I'm not on a locked bootloader. I tried the 4636 on my Nexus and S3 and it pulls up the testing screen on both phones
Sent from my Nexus 5

ShapesBlue said:
I
I've been seeing this a lot. They were more than likely disabled by Samsung as they were codes for technicians not for the general public
I was able to bring up one code, *#06# which shows you your IMEI, however the other two don't work. I'm not on a locked bootloader. I tried the 4636 on my Nexus and S3 and it pulls up the testing screen on both phones
Sent from my Nexus 5
Click to expand...
Click to collapse
It's not even showing up my IMEI !
Is there any way to fix it ????

Aqib Ayub said:
Is there any way to fix it ????
Click to expand...
Click to collapse
Not sure. It might because it was disabled at some point via the OTA updates
Sent from my Nexus 5

[INFO]How to find out product region code based on IMEI only !

I own a I9505 but i threw away the box that contained the product region sale code.
Recently i came across this samsung website : https://support-ca.samsung.com/secaew/consumer/ca/findwarranty/warrantyinfo
You simply input your IMEI and you receive a model number like this one : GT-I9505ZKACNX
And there you go. You found out your initial region sale code.

Excellent. Thanks!

Doesn't find my phone
I know this is an old post, but the website listed fails to find the details from the imei number of my Galaxy S4 i9505.
Perhaps they have removed it as it is now over 5 years old.
Any other suggestions on how to find the same info?
Thanks.

Get without IMEI ur region code
irmuk said:
I know this is an old post, but the website listed fails to find the details from the imei number of my Galaxy S4 i9505.
Perhaps they have removed it as it is now over 5 years old.
Any other suggestions on how to find the same info?
Thanks.
Click to expand...
Click to collapse
Hi,
I've the same problem, but I solved it:
1. Make a Samsung Account
2. Register your phone
Log in into Samsung -> you Profile and you will see this:
"Product
Galaxy S4
GT-I9505DKYDBT"
Hope it helps anybody
So long Namandar!

IMEI Issue

hi I'm using LG G3 at&t when i dial *#06# to check my imei i get this imei 014065003555445-66 why -66 is there? what does it mean?

zeeshanali1993 said:
hi I'm using LG G3 at&t when i dial *#06# to check my imei i get this imei 014065003555445-66 why -66 is there? what does it mean?
Click to expand...
Click to collapse
Is there any problem with your phone?

N20U model number.

Hi
My model number is SM-N986B/DS, what does DS stand for? I'm looking to find latest firmware to update the phone.

Dual sim

Thanks

Gamric said:
Hi
My model number is SM-N986B/DS, what does DS stand for? I'm looking to find latest firmware to update the phone.
Click to expand...
Click to collapse
Digital Sonophone.