Database Info

ROMs for HTC Universal, by Cotulla

HTCUNI_ROM_WWE_Q3
Windows Mobile 6.1 Professional 192DPI WWE 20757
Please read whole message before install!
ONLY FOR G3!
Please don't ask about G4 support.
Installation
1. You must connect your device to AC power source.
2. Your device must be full charged.
3. Run ROMUpgradeUt.exe
4. After, you must NOT do hardrese.
5. Don't do anything with your device while it's booting, until you see Welcome screen
6. Now you can do everything.
If you have problems, try to reflash rom.
During first boot you can see artifacts on screen. Don't worry.
Uninstallation
1. You should able to use MTTY program for uninstallation.
2. Go to bootloader (Power + Lamp + Reset)
3. Run commands:
Code:
task 32
task 28 55aa
4. Wait
5. Now you should reflash original WM50 rom.
6. Now you can install something else if you want.
Description
1. New IE60Mobile.
2. 64 and 128 RAM support.
3. If you have 64 RAM, PagePool size is 6 MBytes.
4. If you have 128 RAM, PagePool size is unlimited.
5. NETCF20
6. WLM, PowerPoint, SQLCEMobile, MMS deleted.
7. ROM is working only on G3 devices. Don't install it on G4!
8. No ExtRom. Please don't try to unlock it and etc
9. No Flash Disk
10. Rom haven't any additional applications (Except HTC ones)
11. WM61 CommManager.
12. 50 levels of brightness.
13. BlueTheme
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you don't like WM61 touch flo, you can disable it:
Code:
[HKCU\ControlPanel\Gestures\Touch]
Disabled=dword:1
If you need additional applications like keyboards, TF2D, CommManagers you can install it by hands.
If you have comments/bugreports/problems fill free to post it in this thread.
Downloads
http://www.rapidspread.com/file.jsp?id=rf2lfpapbr
please don't reupload files - let it be only here.
For other developers: please don't use parts of my work without permit. I spend a LOT OF time for my 'features'

<reserved>

<reserved2>

<reserved3>

<reserved4>

Great work!!!!!
Great work!!!
This is a big storage version ?!?

good to see more cooks im downloading now to try later and ill update my post with results!

Cotulla, glad to see you here!
4 post reserved make my hope for G4 version keep alive!
Best regards!

downloading, feedback later

about this rom
really fast and stable. nothing is missing .
i have small troubles with Wi-Fi but possible from my Device.Still testing.
Good work
Greetings

on RUS forums people have small problems with long connection WiFi time...
do you have also this issue?

i have ran into no wifi issues or any other issues, this rom allowed me to customize more because of all the wonderful extra space great job my uni is running like a lightning bolt!

new rom
i reinstalled just to be sure about this WI FI issue, and have it as you say - long time connecting (sometime not connecting at all). then i try some other rom and WIFI its working fine on my Device ,so the issue must be in the rom.
Otherwise - really great.
Спасибо болшое
Приветствие из Болгарии

No sdhc-support
Nice rom.
No sdhc support.

I'm amazed by the memory screenshot... that's a lot of storage memory more than conventional ROMs... but I'm a bit worried about the program's RAM, on a 64Mb device it would be only around 20Mb or less just after boot... am I right?

jfcc58 said:
Nice rom.
No sdhc support.
Click to expand...
Click to collapse
Yes it's supported. My SD16Gb run well.
My question : The first boot it's strange... It's possible to explain the process.
And my Activesync not work.
Thanks

Screen
Please someone paste more screen shots....Thanks...

You added normal storage + Flash Disk + Storage and made it all one big storage, that is a good Idea, i don't know how this memories work but all rom developers should do this.

No sdhc support.
Click to expand...
Click to collapse
Hmmm....my SDHC cards are working...
honestly there another small problem (with-low-power-disable-sd-card), it will be fixed in next release.
And my Activesync not work.
Click to expand...
Click to collapse
it should work... do you have installed AS45?
but I'm a bit worried about the program's RAM, on a 64Mb device it would be only around 20Mb or less just after boot... am I right?
Click to expand...
Click to collapse
no. On 128 MB you have unlimited page pool, so system take more memory, but work faster.
On 64 MB 6 mbytes PagePool used, so you should have more than 20 MBytes of memery.
Please someone paste more screen shots....Thanks...
Click to expand...
Click to collapse
what you want to see....

ok, i'll give it a try then...
do the pagepool setting is automated or I have to change it by myself before flashing?

Apps on SDcard RC8

Hi,
I hope i am not repeating anything here, i have tried searching.
I am from the Uk and have a jf for RC8. What i want to do it use the 'Apps for SD card' mod, but all the tutorials say to use RC33 and the latest radio. Am i right in thinking the the mod wont work with the RC8?
if so why. What is the big difference in the RC8 that wont make it work. same with the themes, i keep seeing RC33 only and only have found 2 that say RC8.
Any help would be gratefully appreciated.
Chris
ps. also is there a wiki or something explaining all these sorts of thing in detail?

*bump* *bump*

anyone? a simple no cos.. or yes but would do.
Chris

Hi,
I don't think the radio update applies to the Uk version.
So no need to worry about it.
As far as the process goes there is a excellent post here that I followed:
http://forum.xda-developers.com/showthread.php?t=468959
This really should be a sticky.
Here a few screen captures that I made just in case I had to do it again.
I used adb to do the whole process.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let me know how you make out.

Sooo, this will work on RC8?
Have you done it yourself or are you guessing?
What is the worstcase scenario if it doesn't work?
bestwebs said:
Hi,
I don't think the radio update applies to the Uk version.
So no need to worry about it.
As far as the process goes there is a excellent post here that I followed:
http://forum.xda-developers.com/showthread.php?t=468959
This really should be a sticky.
Here a few screen captures that I made just in case I had to do it again.
I used adb to do the whole process.
http://bestwebs.com/adb1.png[/IMG ]
[IMG]http://bestwebs.com/adb2.png[/IMG ]
Let me know how you make out.
:)[/QUOTE]
Click to expand...
Click to collapse

Hi,
If your phone is rooted I don't see why it wouldn't work.
Do you have your ext2 partition setup on your sd card?
Do you have adb running from your computer?
I use jf 1.41 rc33
Maybe wait for a reply from a uk user or someone more experienced with linux.

bestwebs said:
Hi,
If your phone is rooted I don't see why it wouldn't work.
Do you have your ext2 partition setup on your sd card?
Do you have adb running from your computer?
I use jf 1.41 rc33
Maybe wait for a reply from a uk user or someone more experienced with linux.
Click to expand...
Click to collapse
Yes, I have a rooted phone with an 1gb ext2 partition and 7gb Fat32.
I think I'll wait a bit longer before experimenting with this without knowing the concequences if it doesn't work. Using RC33 atm, so I will survive for know.

Hi,
I have managed to do this with my jf RC8. I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=468959
but used the part which doesnt use the usb to pc cable. i dint want to mess around with adb (also i am quite familiar with the Linux console).
it went fine (apart from my sd card not formatting properly. i used my camera to format it then used gparted in linux to setup all the partitions) after that it worked fine. I now have 54mb free on my phone memory.
I have only noticed a very tiny lag when first opening an app, like less that half a second, but this is well worth it as now i can have all the app i want without that 'out of space' notification every 3 days.
Thanx to bestwebs for the link!
Chris

Hi,
Glad it worked.
Yes, the lag is very minor.
I have been using that procedure for my phone for 2 weeks now.
It's good that you verified it to work on rc8.
I like to use adb because you can type all the commands from your computer instead of from terminal emulator.
Right now , I have 47 apps installed and 66 megs free phone memory.
My sd card shows with busybox, 55 megs used from my ext2 partition.
That post is really amazing.
Enjoy.
wardy277 said:
Hi,
I have managed to do this with my jf RC8. I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=468959
but used the part which doesnt use the usb to pc cable. i dint want to mess around with adb (also i am quite familiar with the Linux console).
it went fine (apart from my sd card not formatting properly. i used my camera to format it then used gparted in linux to setup all the partitions) after that it worked fine. I now have 54mb free on my phone memory.
I have only noticed a very tiny lag when first opening an app, like less that half a second, but this is well worth it as now i can have all the app i want without that 'out of space' notification every 3 days.
Thanx to bestwebs for the link!
Chris
Click to expand...
Click to collapse

[Unbranded!]HTC Sapphire/Vodafone Magic System folder!, Get It while it's hot!

Full drop was not posible.
So made a copy of the System folder.
If you like the work of me & my source, don't forget to help us buying a beer.
Get it while it's hot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version:
20090109 Sapphire Asia WWE
DROP OF THE SYSTEM FOLDER:
http://www.xmoo.org/android/htc_sapphire_system.rar

nice- can't wait to see what JF can do with this!! i noticed there is a built in pdf reader too...

0_o
ooooo...I'm excited for this, what the outcome will be.
^-^

PDF Reader?
Interesting, there seems to be a PDF reader in there, and an FTP client. Did you install these on your phone, or were they supplied with it? It'd certainly be nice to have pdf capability in the new cupcake update for the G1...

We may get a taste of cupcake early depending on what JF does with this.

NOTE:I'm tired as crap cause I stayed up for 48 hours but I'm so happy cause of this. Excuse my errors.
I'm gonna be the risk taker here and try to apply this on a G1. I should be able to use my backup from nandroid if anything happens. So all this is the system "partion" as fastboot seems to describe it as? So basicly I have to mount system via recovery and replace it?

otto888 said:
NOTE:I'm tired as crap cause I stayed up for 48 hours but I'm so happy cause of this. Excuse my errors.
I'm gonna be the risk taker here and try to apply this on a G1. I should be able to use my backup from nandroid if anything happens. So all this is the system "partion" as fastboot seems to describe it as? So basicly I have to mount system via recovery and replace it?
Click to expand...
Click to collapse
Keep us updated on how this goes. I'm very interested to see the results.

Gimpeh said:
Keep us updated on how this goes. I'm very interested to see the results.
Click to expand...
Click to collapse
tried to use mv...cant boot into normal anymore...checking if system is changed any
EDIT: Pic shows system...

sethp said:
Interesting, there seems to be a PDF reader in there, and an FTP client. Did you install these on your phone, or were they supplied with it? It'd certainly be nice to have pdf capability in the new cupcake update for the G1...
Click to expand...
Click to collapse
This was all in it.

I may get this to work by making it into an img file(nandroid backup file)...How would I do that....on Windows 7?
EDIT: IDEA! Install the latest cupcake build from andblogs.net and try installing all of this stuff manulaly

Could you just copy say, the PDFReader.apk onto your sdcard and install it from there? Or drop the apk into an update.zip?

I tried to install the PDFreader but it fails due to missing libraries. How do I load this firmware into the emulator so I can mess arround with that one instead?

Crazy idea. Take the latest JFrc33 update and overwrite any file in the update with the magic system files...should atleast boot

Lots of HTC stuff
uherrera said:
I tried to install the PDFreader but it fails due to missing libraries. How do I load this firmware into the emulator so I can mess arround with that one instead?
Click to expand...
Click to collapse
Yeah, to be more precise it's missing all the HTC framework stuff. Doubt you would get away with just adding that stuff to your install:
Package com.htc.pdfreader requires unavailable shared library com.htc.framework; ignoring!
Click to expand...
Click to collapse

Somebody should change the subject to HTC Magic System Folder.
Then more people would go to the thread.

pdf reader, etc
hmm, i tried copying the frameworks into system/framework and then installing the .apk file, but that didn't seem to work. Do additional frameworks need to be registered, i wonder?

dwang said:
Somebody should change the subject to HTC Magic System Folder.
Then more people would go to the thread.
Click to expand...
Click to collapse
Changed to HTC Sapphire/Vodafone Magic
Cause officialy it's from the HTC not Vodafone.

Tried my update idea...boots to recovery...atleast it boots now.

HTC Framework stuff
sethp said:
hmm, i tried copying the frameworks into system/framework and then installing the .apk file, but that didn't seem to work. Do additional frameworks need to be registered, i wonder?
Click to expand...
Click to collapse
Yup. See the bottom of /system/etc/permissions.xml
Thing is, I wouldn't be surprised if the android build this thing expects is newer than your current one, with assorted changes in the API, and if the HTC framework stuff depends on more HTC stuff lower down the stack (I notice there's a "libhtc_ril.so" for instance in /system/lib - not looked into what exactly it contains tho).
As a result it'll probably take a bit more than just dropping things into your current installation. That said, I'd love to play around a bit more if I weren't at work

Stop update your phone using these file. These file is made for Magic, not Dream. It has driver file for Magic, not Dream. Wait for JF and stop doing stupid things.

[ROM-alpha] CyanogenMod 10 (Android 4.1.2) [20121017]

Alpha preview, not intended for daily use!
Source: https://github.com/nadlabak
Downloads:
Nightly builds: http://skrilax.droid-developers.org/cm10nightly/umts_sholes/
Gapps: http://d-h.st/05j
OpenRecovery 2ndbootOR: http://code.google.com/p/cyanogenmod4milestone/downloads/detail?name=OpenRecovery_2ndbootOR_v1_1.zip
Notes:
JellyBean is very big, therefore ext partition on SD card is required - part of the system and most of the gapps is installed there.
You can find instructions on how to resize fat and create ext partition directly in OpenRecovery in this very fine guide by pontomedon:
Full guide from stock Motorola Android to CyanogenMod 7 for Milestone
Please use 2ndboot based OpenRecovery for installation to avoid sdcard write errors.
The CM10 builds are using 2ndboot to run custom kernel.
Thanks to Skrilax_CZ, the issue of low performance before the first device suspend has been resolved (L2 cache remained disabled before).
The bad GPU performance on CPU clock bellow 600MHz is currently successfully worked around by temporary insmod of older pvr driver
during boot, so it's not an issue anymore (from the user perspective) has been properly fixed by Skrilax_CZ.
Wifi tethering should work since 20121028 nightly.
Other known issues:
- video recording is not working very well currently
HW acceleration increases the application's RAM demands. You can use the included HWA Settings app to disable it per app.
Remember that JellyBean is designed for devices with much bigger RAM than Milestone has. Don't expect miracles .

It really deserved a thread.
You made an incredible job, sir!
JB on the old Milestone, and it is usable as a daily driver. :good:

kabaldan said:
Alpha preview, not intended for daily use!
Source: https://github.com/nadlabak
Downloads:
Nightly builds: http://skrilax.droid-developers.org/cm10nightly/umts_sholes/
Gapps: http://d-h.st/rkk
OpenRecovery 2ndbootOR: http://code.google.com/p/cyanogenmod4milestone/downloads/detail?name=OpenRecovery_2ndbootOR_v1_0.zip
Notes:
JellyBean is very big, therefore ext partition on SD card is required - part of the system and most of the gapps is installed there.
You can find instructions on how to resize fat and create ext partition directly in OpenRecovery in this very fine guide by pontomedon:
Full guide from stock Motorola Android to CyanogenMod 7 for Milestone
Please use 2ndboot based OpenRecovery for installation to avoid sdcard write errors.
The CM10 builds are using 2ndboot to run custom kernel.
Unfortunately, because of yet unknown reason, the device performance is limited until the phone first enters a deep sleep after 2ndboot.
This issue will be hopefully fixed some day.
Other known issues:
- video recording is not working very well currently
HW acceleration increases application's RAM demands. You can use the included HWA Settings app to disable it per app.
Remember that JellyBean is designed for devices with much bigger RAM than Milestone has. Don't expect miracles .
Click to expand...
Click to collapse
Amazing that development still is being made for a device this old! :good: but what about making a cm9 build with 2ndboot ? as jellybean from my experince demands much more resources then ics

With swap even Chrome browser works now - incredible!

After flash this cm10 build , my gallery and music player can't see any images or music , although i had try to remount my sd card , how can i fix it ?

Which rom you used previously?
In case you upgraded from any different from CM10, you should make a full wipe. (data,cache,dalvik-cache)
Do you have ext partition on your sd card? It is necessary to use this rom.

hello. how long it takes after the first boot to run. Sorry for my English. thanks

Eiertschik said:
With swap even Chrome browser works now - incredible!
Click to expand...
Click to collapse
Do you have both swap and compcache activated at the same time?

Can´t believe it´s finally, here, amazing work!! :good:

max_avatar said:
hello. how long it takes after the first boot to run. Sorry for my English. thanks
Click to expand...
Click to collapse
almost 15 mins for first boot

The build from yesterday boots within a few minutes for me.

Skrilax_CZ has fixed the sluggishness after boot!
Another problem solved.

I have had a lot of trouble trying to partition my SD card so is there a easy fool proof way of doing it? I have a 16GB sdcard..

naeem123 said:
I have had a lot of trouble trying to partition my SD card so is there a easy fool proof way of doing it? I have a 16GB sdcard..
Click to expand...
Click to collapse
What trouble? That is usally a straitforward process, especially with the modern GUI tools.

And how it's working? Any errors that would make it unsuable as a daily rom?

_crAss_ said:
Do you have both swap and compcache activated at the same time?
Click to expand...
Click to collapse
No - just swap
64MB partition, mounted with Swapper2, swappiness default (10, iirc)

Super laggy for me, even after deep sleep :/ Excellent work though!

Its been great so far, this rom works like a charm, pitty it doent show all internal ram available with 1GB extra on the SDCard.

Attention everyone!
As you may know or not know, Skrillax_CZ has found out what caused the lag before the first deep sleep.
The latest nightly (10.18) already contains the fix, so i suggest everyone to upgrade.
Works like charm for me, no lag even after the first boot.

Work perfectly!!!
Just to confirm that, the ver 18/10 works so well on my milestone without any errors... What I have done for my phone is as follow:
- Flash back to stock ROM 2.1.1
- Completely format the SD card
- Use the 2nd boot OP to root the phone
- Partition the SD card again
- Flash directly from 2.1.1 to CM10 ver 17/10, and then 18/10...
Work perfectly even with big app like Chrome, G+, Google now, etc...
Here are some screenshots... Again, credit gives to kabaldan. Million thanks to him for great effort for our milestone community...:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Rom]2.3.7[MIUI]2.4.20

MIUI 2.4.20
// HTC Dream:G1
// 2.3.7
// Based on Tvall's CM7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Attention
Always do a backup before flashing, responsibility lies with the operator of the device ultimately
Features
All the standard MIUI features
Known Issues
- Unknown!
Instructions
1. Download the rom, kernel, and gapps to your sdcard.
2. Make sure you are in recovery mode with a custom recovery.
3. Full Wipe!
4. Flash the rom
5. Flash the kernel.
6. Reboot.
Download
MIUI: 2.4.20 RC2
Kernel: Ezgb Kernel

Misc. Notes
This is MDPI based, and I followed procedure properly so everything should work here, but if anything is broken please let me know.
Also take note that DL'd themes do not work unless modified for MDPI use
Important
On first boot things may look garbled, after a reboot everything should be fine.
There may appear to be errors on install but everything should straighten out after a reboot.

What is the best gapps to use with this ROM and where can I get them from?

looks like gapps are packed with the rom so dont flash any separately

Everything is working as intended?

As of right now I am getting stuck on the green mytouch screen. The checksum of my downloads are correct. I know the problem isn't the kernal as I have used it before.

This has enough DLs for me to ask If your bootloop problem is isolated or not, is anyone else experiencing this?

wont install on a g1, tried two downloads (md5 for both 5F48EAFF996F2FA6BC7CC1F9195F7AA4) if you want to confirm
i dont have time to trouble shoot right now but at first the error appears to be missing a ringtone (romancingTheTone.ogg) and install is aborted, havent tried to adding it to test but someone else did (has only a couple of posts so he pm'd me as he cant post in this thread) and said the same. he tried replacing the file and then got another error that wouldnt let him flash, certinstaller error i think, but dont know why that would cause it not to instal. ill test tomorrow when i have more free time just giving you a heads up

Would that work on 32A devices with old radio?

This is my first time doing an MDPI MIUI port, It's strange for it to not work but I will compile a new build soonish

Ok, Uploaded RC2 and stripped the rom of potential breaks, so here goes folks!

anyone actually tested this?

tass0s said:
anyone actually tested this?
Click to expand...
Click to collapse
The first was non-functioning due to services and Framework, the second should probably work fine but If not I'll have to go the diffing route.
Either way I can for sure get this to be functional but I need feedback :s

Second Copy is smashed as well, It looks like I'm going to have to mess with code I'll have a new and hopefully proper build this time!

I hope you get this fixed! I love MIUI!
Just one thought; check system parition size, it may need to be bigger as MIUI is fairly big rom
Sent from my Desire HD using xda app-developers app

Okay my G1 stay alone without work and I preform test of yours rom. But my feedback is negative.
1. You have missing ogg melody and instillation was aborted because zip dont match with signature. I was able to install when disable signature verification. Thansk frankey
2. The rom dont boot. I try with RA/CWM recovery result was same. Are you sure this rom dont have need from custom MTD ??? My Logcat

From that logcat, audioflinger is dying. It isn't opening the files /system/etc/AudioPara_TMA.csv and /system/etc/AudioPara4.csv
Check to see if those are there. If not, get them then try.
Also, second post of my roms thread http://forum.xda-developers.com/showthread.php?p=31653323. If you use stuff I compiled, it states that you should at least send me a pm about using my work.
And the name is tvall. that's a lowercase "t".
Edit: still haven't downloaded yet. Just looking at file size, looks almost certainly like its too large for stock partition sizes. Try slimming it up, or moving some apps to /data, or just using custom mtd

i flashed it thru RA but it wont flash

just downloaded and looked. this rom is ~140mb. the /system partition on the g1 is 90mb. see the problem? trying to slim it up. got it down to 120mb by removing livewalpapers and apps that we are not allowed to distribute (including gapps isnt allowed). still have to free up ~30mb for this to be even usable. youll probably just have to use custom mtd.
edit:
have not tested this. /system size is 88mb, so no gapps yet. http://www.mediafire.com/?i3bsba3sgbf4e49. it may or may not boot. i have not tested. i just fixed the first obvious major issue with this rom, thats all.

tvall said:
just downloaded and looked. this rom is ~140mb. the /system partition on the g1 is 90mb. see the problem? trying to slim it up. got it down to 120mb by removing livewalpapers and apps that we are not allowed to distribute (including gapps isnt allowed). still have to free up ~30mb for this to be even usable. youll probably just have to use custom mtd.
Click to expand...
Click to collapse
Including gapps isn't allowed? Since when I use miui with them merged into the ROM
Take custom mtd up to 120 and then delete anything else we really don't need? Slim down ring tones to maybe 3 or 4
Good luck dude!
Sent from my HTC Desire HD using xda app-developers app