Related
Hi!
This might seem stupid but I can't make the cab files install on my O2 XDA Exec
I know that(what I could gather from searching the forum) one has to transfer these files directly to the xda instead of using active sync , but then what after that and how?
Please need help with this. I have found so many really good and neat utilities on this forum but can't use 'em b'coz of my lack of knowledge. Any help will be greatly appreciated.
Thanx in advance
Use "Mobile Device" in "My Computer" to access your XDA and put files in it.
Then (on XDA) launch "File Explorer", find those files and tap them to install.
If you copied just into "Mobile Device", you'll find files in "My documents" folder of your device.
Of course you can copy and run files from wherever you want.
I hope this explained your problem
Good luck
When you get more advanced you can use this:
http://ukaywares.blogspot.com/2005/10/cabinstl-104.html
It let's you install the application to any place you want without using ActiveSync...
Thanx mate, i'll try that tomorrow.
Still doesn't work
I transferred the extracted files to my XDA EXEC, when i click it , it gives an error ..this file/program is not associated with any application and to run the application first andthen open it from with in.
I even tried the cabinstaller but that just hangs up when I try to onstall the cab file through it.
Help please :?:
Hi,
what do you mean by "extracted files" ?
You have to put the CAB file into your Exec, and then tap it from Exec's file explorer.
Where did you get "not associated" error ? (PC or Exec ?)
If you got it in your Exec, it means that it wasn't a CAB file that you tapped.
Check again.
Hello, ive just upgraded to wm05 and my tomtom 6 worked perfectly before. now when i turn it on the back light goes off instantly. i have tried hex editing it from Backlight to Bbcklight but it comes up with an error when i try to open tomtom then. i have also tried downloading a pre patched one from this forum but still the same error.
Any help would be appreciated.
I have a xdaii
Thanks Andrew
Any help here at all please ive tried my hardest to get this working.
this is the error message i get when i open it with the patched file.
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
fixed it no worries now
andrew88 said:
fixed it no worries now
Click to expand...
Click to collapse
How did you get it working?
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Re: tomtom6 on xdaII
I have the same problem as you have. You said you hex edited tomtom navigator.exe. Which editor you are using and which location you are changing?
Help will be appriciated.
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
andreabix said:
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
Click to expand...
Click to collapse
Try this. I got it from one of the forums
Thanks a lot!!!
This fix worked fine for me.
pparmar said:
Try this. I got it from one of the forums
Click to expand...
Click to collapse
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
I have tried this and still no luck, the fix error message is still coming up, anyone any ideas?
im having the exact same problem
i have downloaded the file TomTom-Backlight-Fix.ZIP
i have copyed the file over to /program files/ navigator/
i am getting the error message
i have also downloaded and installed the fix-error-message.zip
i have extracted the .cab file to the root of the memory card and i have ran it.
it installed sucessfully.
but i am still getting the error message saying that the file is not signed or the components cannot be found.
could you please help me as i need tomtom 6 working as soon as possible
Same Problem
Guys, where does the file go? How do i use it?
Thanks.
Help with tomtom 6
I have a palm treo 650. I just downloaded tomtom 6 and U.S. maps online. I installed tomtom 6 on my phone. (im pretty sure I did it right). I have the navigator symbol and everytime I click it, it says, "tomtom sd card not found".
Well I put a bunch of crap on my sd card and tried it again. I clicked to open the navigator but this time, instead of it saying "tomtom sd card not found", the phone completely shut off on me, then restarted.
I dont know what i am doing.
can someone help me? thanks!
I don't know anything about palm treo 650, but I cleaned the SD card and transfered all tomtom6 files on my desktop computer using card reader. As soon as you insert SD card in to your palm itwill start installing. Try it it might work.
@Fudger: find out where Tomtom Navigator.exe is on your device and replace it by the one posted above.
@oakman: thanks for kicking this thread back up.
I already created another solution for myself, a mortscript that writes to backlight registry keys once Tomtom starts. It is less elegant, backlight flashes and Tomtom starts slower. So
@andrew88 Thanks a lot
Now @All:
I found several solutions on the web for Tomtom turning volume to 70% at start up, but I don't like any of them very much. Anyone who's been able to tweak Tomtom to set it to 100% default?
thanks
very
much
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
still struggling with backlight
Hi. I have TT6 v 6.01. I have an IPAQ 214, and whilst I used TT6 OK on my LOOX 720, I get the "no backlight" problem on the IPAQ. I have seen the suggestions here. Edit Backlight to Bbcklight first. On my TomTom Navigator.exe there is only one occurrence (UTF). I've edited that and saved. The version posted here seems to have only one occurrence too, but the addresses are different. Different release? Tried my edited version and got the error everyone else reports re certificate. So then I looked at the CAB file suggested to fix the error message. How should this be installed? I put it onto my SD card and found it using explorer on PDA. Double clicked and installed it to "device". No good. Then installed it to "File Store". No good. Then put it into Navigator folder and installed it. No good either. Anyone got any other ideas please?
I've got this same issue on an Ipaq 214 with Tomtom 6.
I can see the issue being described with editing the exe with a hex editor to reference the backlight function correctly, and like others I'm getting an issue with the cerfificate of the file.
TomTom6 does not have a cab called Cert_SPSC
How can I fix the certificate error with tomtom 6 ?
I've edited the TomTom Naviator.exe file correctly, and just need to fix the certificate error.
unicode editor
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
how can i get uni-code editor. is it available to download
uni code editor
How can I get uni code editor? I download hex editor but can not see the right code
Thanks,
I have searched on the forum about this, but was unable to find anything about it. I have got iGo 8.397313 working on my Diamond 2, but the detour function doesn't work. I get the following error when I press one of the detour options:
(First Aid) "Failed to open file: Poi_brands.spr exiting application."
After some research I found these file in Branding.zip (ui_igo8/common/..). I copied them to the data.zip, but that didn't do the job.
I hope someone is able help me, thanks
Klootzak NL said:
I have searched on the forum about this, but was unable to find anything about it. I have got iGo 8.397313 working on my Diamond 2, but the detour function doesn't work. I get the following error when I press one of the detour options:
(First Aid) "Failed to open file: Poi_brands.spr exiting application."
After some research I found these file in Branding.zip (ui_igo8/common/..). I copied them to the data.zip, but that didn't do the job.
I hope someone is able help me, thanks
Click to expand...
Click to collapse
try delete all files in poi folder (make backup) and see if is working.
Doesn't work
What files am I supposed to have in the POI folder? The only file I have in there is Netherlands.poi.
Thanks in advance for your help
i have this problem from this program. and i'm not using igo8
any fix available ?
Delete branding.zip and you fix the problem.
hi guys!
can someone with some skills make a link between navi panel and IGO8, or Tom Tom or whatever navi software you like
in fact it would be even better to have the liberty to chose what navi software to be linked with Navi Panel
i would certanly like something like that
regards
noris08 said:
hi guys!
can someone with some skills make a link between navi panel and IGO8, or Tom Tom or whatever navi software you like
in fact it would be even better to have the liberty to chose what navi software to be linked with Navi Panel
i would certanly like something like that
regards
Click to expand...
Click to collapse
Well Noris there are allready several threads about your question.
In one of them I found this file which let you chose any navigator through NaviPanel, I forgot who made it but many thanks to him!!
robert.maas said:
Well Noris there are allready several threads about your question.
In one of them I found this file which let you chose any navigator through NaviPanel, I forgot who made it but many thanks to him!!
Click to expand...
Click to collapse
thank you for this, but i don't know what to do with it
any threads where it is explain the procedure?
cheers
noris08 said:
thank you for this, but i don't know what to do with it
any threads where it is explain the procedure?
cheers
Click to expand...
Click to collapse
Well you adapt the config.ini to th likening of your navigator and copilot.exe you put in the copilot directory.
For more explanation you could take a look over here : http://www.google.com/cse?cx=partner-pub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1&q=navipanel+hd2
robert.maas said:
Well you adapt the config.ini to th likening of your navigator and copilot.exe you put in the copilot directory.
For more explanation you could take a look over here : http://www.google.com/cse?cx=partner-pub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1&q=navipanel+hd2
Click to expand...
Click to collapse
thank you!
it seems i have to "dig" a little cause the first attempt failed
regards
noris08 said:
thank you for this, but i don't know what to do with it
any threads where it is explain the procedure?
cheers
Click to expand...
Click to collapse
Mate it looks like you copy the copilot folder to your Device\Program Files and then edit the config file to contain the path to your chosen nav software.
I am havin a play with it now, I will let you know.
robert.maas said:
Well Noris there are allready several threads about your question.
In one of them I found this file which let you chose any navigator through NaviPanel, I forgot who made it but many thanks to him!!
Click to expand...
Click to collapse
Cant seem to find this thread, could you please provide a link?
Thanks mate
Piemole said:
Mate it looks like you copy the copilot folder to your Device\Program Files and then edit the config file to contain the path to your chosen nav software.
I am havin a play with it now, I will let you know.
Click to expand...
Click to collapse
i don't have igo8 installed on my hd2.
i have it on my sd card and ususaly i make a shortcut to igo8.exe from my sa card in order to run it
if you can make it work, maybe you post here a step by step guide
thanks a lot!
1) Modify the "config.ini" file with a text editor (eg. notepad).
So if you're using TomTom for example the Path looks like this:
Path=Program Files/Navigator/TomTom Navigator.exe
2) Create a directory named "CoPilot" in "\Program Files".
3) Copy the "CoPilot.exe" and your modified "config.ini" files in this directory.
4) Start the NaviPanel and it should work.
If it doesn't work it is maybe you're using a custem ROM and you have to register "alksdk.dll". To do so create the followong registry key :
[HKEY_LOCAL_MACHINE\Software\HTC\NaviSW]
"SDKModule"="\\windows\\alksdk.dll"
I included my .cab which does everything for you, so you only have to change the "config.ini" file if you're not using TomTom. It creates a shortcut for NaviPanel in Programs - GPS, adds an icon I like to NaviPanel, starts TomTom and register the dll.
Good Luck guys hopefully this was helpfull for you.
robert.maas said:
1) Modify the "config.ini" file with a text editor (eg. notepad).
So if you're using TomTom for example the Path looks like this:
Path=Program Files/Navigator/TomTom Navigator.exe
2) Create a directory named "CoPilot" in "\Program Files".
3) Copy the "CoPilot.exe" and your modified "config.ini" files in this directory.
4) Start the NaviPanel and it should work.
If it doesn't work it is maybe you're using a custem ROM and you have to register "alksdk.dll". To do so create the followong registry key :
[HKEY_LOCAL_MACHINE\Software\HTC\NaviSW]
"SDKModule"="\\windows\\alksdk.dll"
I included my .cab which does everything for you, so you only have to change the "config.ini" file if you're not using TomTom. It creates a shortcut for NaviPanel in Programs - GPS, adds an icon I like to NaviPanel, starts TomTom and register the dll.
Good Luck guys hopefully this was helpfull for you.
Click to expand...
Click to collapse
thank you very much!
i'll try this later in the evening and i'll report back
have a nice evening!
it works perfect
thank you very much!
noris08 said:
it works perfect
thank you very much!
Click to expand...
Click to collapse
Allright!! You're welcome
I included my .cab which does everything for you, so you only have to change the "config.ini" file if you're not using TomTom.
HEY CHAMP,
I STILL CANNOT GET IGO8 TO LAUNCH THROUGH NAVIPANEL
i changed the config file to point to the ig08.exe file but still no luck
can u please type a through step by step tuitorial on how to get navipanel to launch ig08
i dont have tomtom and prefer igo8...i also installed ur navpanel cab but nothing happened!!!
i am happy to make u a donation if u can get my igo8 to launch through navipanel
cheers
robert.maas said:
1) Modify the "config.ini" file with a text editor (eg. notepad).
So if you're using TomTom for example the Path looks like this:
Path=Program Files/Navigator/TomTom Navigator.exe
2) Create a directory named "CoPilot" in "\Program Files".
3) Copy the "CoPilot.exe" and your modified "config.ini" files in this directory.
4) Start the NaviPanel and it should work.
If it doesn't work it is maybe you're using a custem ROM and you have to register "alksdk.dll". To do so create the followong registry key :
[HKEY_LOCAL_MACHINE\Software\HTC\NaviSW]
"SDKModule"="\\windows\\alksdk.dll"
I included my .cab which does everything for you, so you only have to change the "config.ini" file if you're not using TomTom. It creates a shortcut for NaviPanel in Programs - GPS, adds an icon I like to NaviPanel, starts TomTom and register the dll.
Good Luck guys hopefully this was helpfull for you.
Click to expand...
Click to collapse
Awesome thanks for your help.
I am making some progress now. I was unable to even get clickiable icons in the navipanel.
After installing the cab I have clickable icons in the navipanel but when I click them I get a message apperar that says "-2147479552" All I can do is hit OK but it keeps reapperaring.
My tom tom is installed directly to the root of the storage card. When I change the path to point to my exe file all the icons in the navipanel are greyed out again.
What am I missing here?
@ twilight79
@ Piemole
For the case of TomTom just install TomTom on your device and not on the Storage Card.
For iGo8 verify carefully the path to your Storage Card. If you use a different language ROM the name of the Storage Card is not always the same.
Keep in mind that the config.ini file uses "/" and not "\" in the path. (it was like that and I never tried to change).
Keep also in mind that NaviPanel often stays resident, so after changes kill it with a Taskmanager or reboot your device.
If still not working try to Google the HD2 section in the forum. There is some information about iGo8. Copy the .exe and some .dll and the sys.txt out of the root of iGo8 directory and put them in the CoPilot directory, then change your sys.txt for the right paths.
i get that same number error "2455,,,,,,,"
this stuff is driving me insane
cum on robert_mass....create a step by step tuitorial....i just need to know what has to be done in directing navipanel to igo8 exe
twilight79 said:
i get that same number error "2455,,,,,,,"
this stuff is driving me insane
cum on robert_mass....create a step by step tuitorial....i just need to know what has to be done in directing navipanel to igo8 exe
Click to expand...
Click to collapse
In nearly 3 minutes of time you read the post and tried everything I explained????
Come on...
Invest yourself also a bit. And use this http://forum.xda-developers.com/search.php like I and the most members do.
robert.maas said:
@ twilight79
@ Piemole
For the case of TomTom just install TomTom on your device and not on the Storage Card.
For iGo8 verify carefully the path to your Storage Card. If you use a different language ROM the name of the Storage Card is not always the same.
Keep in mind that the config.ini file uses "/" and not "\" in the path. (it was like that and I never tried to change).
Keep also in mind that NaviPanel often stays resident, so after changes kill it with a Taskmanager or reboot your device.
If still not working try to Google the HD2 section in the forum. There is some information about iGo8. Copy the .exe and some .dll and the sys.txt out of the root of iGo8 directory and put them in the CoPilot directory, then change your sys.txt for the right paths.
Click to expand...
Click to collapse
Thanks for getting back to me.
I ended up copying the tom tom files (without the maps) to my device storage and it worked.
I have left the maps on my storage card and it still seems to work.
Thanks heaps for the help mate.
@Twilight, I think your problem will be the same as mine. Try making a Navigation folder in program files on yourt device and copy trhe igo8 files there, then change the exe name to TomTom Navigator. I reckon that will fix it (worked for me anyways)
Thanks again Robert
Piemole said:
Thanks for getting back to me.
I ended up copying the tom tom files (without the maps) to my device storage and it worked.
I have left the maps on my storage card and it still seems to work.
Thanks heaps for the help mate.
@Twilight, I think your problem will be the same as mine. Try making a Navigation folder in program files on yourt device and copy trhe igo8 files there, then change the exe name to TomTom Navigator. I reckon that will fix it (worked for me anyways)
Thanks again Robert
Click to expand...
Click to collapse
Ok, cool it worked for you!
Normally you install the TomTom .cab on your device (the HD2 has lots of memory) and the maps ofcourse you leave on your SD card (TomTom will find them there without any problem).
robert.maas said:
Ok, cool it worked for you!
Normally you install the TomTom .cab on your device (the HD2 has lots of memory) and the maps ofcourse you leave on your SD card (TomTom will find them there without any problem).
Click to expand...
Click to collapse
I didn't use a cab to install tom tom if you know what I mean.
Thanks for your help mate
How does NaviPanel work with iGO8 in Windows Mobile Phones?
I tried many times to find the right suitable way to make the navigation program iGO8 work through the NaviPanel Application in my hTC hd2 and finally I found the solution to this problem.
You should do the following steps one by one to get the best results:
1-Create a file directory under the name CoPilot in your phone memory Program files
2-Install the cab file”MSN-NaviPanel” into your phone in your memory card (this application contains the necessary files to define the Copilot navi extension in the NaviPanel. Thanks to xda-developers forum.
3-After installing the “MSN-NaviPanel”cab file you will find two files which are “config.ini” and “Copilot” and “NaviPanel” inside the CoPilot folder that you created in the Program Files.
4-Now you have to open the iGO8 folder in the Program Files and copy the following files:
sys
gpstmc.dll
iGO8.exe
5-Paste them into CoPilot folder you created.
6-Change the name of the “iGO8.exe” file into “CoPilot.exe”.
7-Make another copy of the iGO8.exe file in the same CoPilot folder and name it “splashscreen.exe”.
8-Now you have 7 files in your “CoPilot” folder.
9-Make the following changes to “config.ini” and “sys” files
Sys file >>>>
[folders]
app="Storage card\igo_folder_as_you_named_it"
config.ini file >>>>>
Path=\Program Files\iGO8\iGO8.exe
KeepAlive=on
10-Don’t run NaviPanel when you are connecting the phone to the internet while doing this operation…. Wait till you finish everything.
11-Now do the soft reset to your device.
12-Run NaviPanel and enjoy iGO8 at the same time.
Note: if you receive a message which says that you should restart installing iGO8 because of the SDcard is not original don’t be afraid, do it and restart the program.
Best Regards
Mustafasamina
There's threads and posts on this already. Basically it just launches the program for the buttons on NaviPanel.
Phenomenon said:
There's threads and posts on this already. Basically it just launches the program for the buttons on NaviPanel.
Click to expand...
Click to collapse
Agree for that!
Thanks for posting.I too had the same problem figuring bis out myself.
Is it possible for an xda-developer to built a cab to make the following:
a)Create a Copilot folder
b)Copy allsdk to windows folder and
c)Making the proper key to the registry
Thanks,
yes, but I think other explanations are not enough to do the operation and there are many visitors who dont have enough knowledge about programing. It is a matter of development but not invention. My all thanks to whom participated in providing all informations about such issues.
pls help
specified argument was out of the range of valid values
pls help
specified argument was out of the range of valid values
murat1966 said:
pls help
specified argument was out of the range of valid values
Click to expand...
Click to collapse
What do u mean exactly?
Did u get this when u installed the above mentioned cabs or what?
If so i suggest modifying your sys.txt clearly specifying the correct path.
[folders]
app="Storage Card/iGO8"
I hope this helps
Moreover can a cook\chef\wizkid from xda devs replace the htc navi crap with sth that works.I would prefer music player integration,cameraand ability to choose over GPS apps. I think it would have come up to be very handy for all of us and a lot of people would donate for this.
karapialis said:
Moreover can a cook\chef\wizkid from xda devs replace the htc navi crap with sth that works.I would prefer music player integration,cameraand ability to choose over GPS apps. I think it would have come up to be very handy for all of us and a lot of people would donate for this.
Click to expand...
Click to collapse
absolutely agree with this idea...
mustafasamina said:
How does NaviPanel work with iGO8 in Windows Mobile Phones?
I tried many times to find the right suitable way to make the navigation program iGO8 work through the NaviPanel Application in my hTC hd2 and finally I found the solution to this problem.
You should do the following steps one by one to get the best results:
1-Create a file directory under the name CoPilot in your phone memory Program files
2-Install the cab file”MSN-NaviPanel” into your phone in your memory card (this application contains the necessary files to define the Copilot navi extension in the NaviPanel. Thanks to xda-developers forum.
3-After installing the “MSN-NaviPanel”cab file you will find two files which are “config.ini” and “Copilot” and “NaviPanel” inside the CoPilot folder that you created in the Program Files.
4-Now you have to open the iGO8 folder in the Program Files and copy the following files:
sys
gpstmc.dll
iGO8.exe
5-Paste them into CoPilot folder you created.
6-Change the name of the “iGO8.exe” file into “CoPilot.exe”.
7-Make another copy of the iGO8.exe file in the same CoPilot folder and name it “splashscreen.exe”.
8-Now you have 7 files in your “CoPilot” folder.
9-Make the following changes to “config.ini” and “sys” files
Sys file >>>>
[folders]
app="Storage card\igo_folder_as_you_named_it"
config.ini file >>>>>
Path=\Program Files\iGO8\iGO8.exe
KeepAlive=on
10-Don’t run NaviPanel when you are connecting the phone to the internet while doing this operation…. Wait till you finish everything.
11-Now do the soft reset to your device.
12-Run NaviPanel and enjoy iGO8 at the same time.
Note: if you receive a message which says that you should restart installing iGO8 because of the SDcard is not original don’t be afraid, do it and restart the program.
Best Regards
Mustafasamina
Click to expand...
Click to collapse
Hi
global_cfg not found...this messagge show me when open the navigation botton in the navipanel
Please help me
Juan
ok, verify the name of your sdcard in sys.txt
robert.maas said:
ok, verify the name of your sdcard in sys.txt
Click to expand...
Click to collapse
Thanks for your answer
The name of sdcard is Storage Card in the two sys.txt (Igo and Copilot folders)
What can I do for resolve this problem ?
Regards
Juan
try first to get iGo8 working as stand alone. Check if it works when you directly execute it from sdcard.
robert.maas said:
try first to get iGo8 working as stand alone. Check if it works when you directly execute it from sdcard.
Click to expand...
Click to collapse
Yes Igo8 working stand alone from Sdcard, but when I wanna that work from navipanel say me that error
Thanks for you help my friend
Juank
robert.maas said:
try first to get iGo8 working as stand alone. Check if it works when you directly execute it from sdcard.
Click to expand...
Click to collapse
Yes Igo8 working stand alone from Sdcard, but when I wanna that work from navipanel say me that error
Thanks for you help my friend
Juank
juanenbas said:
Hi
global_cfg not found...this messagge show me when open the navigation botton in the navipanel
Please help me
Juan
Click to expand...
Click to collapse
you are trying to use igo Primo, and the folder global_cfg from content (on storage card) is missing. that's why.
the navipanel cab has made my phone unstable and keeps htc sense freezing