Please.... CALLING ALL MT3G,magics,Sapphire Users..
I've done so much reading, from so many sources, confusion and sickness
is starting to make me wizzy...
I've currently been rooted for over 4 months now... first with cyanogen
then moved over to SUPER D... And iv been following that ROM since v1.2
now currently on his newest ROM v1.8...
let me first start off by saying when i was with cyanogen
i remember running MARKS THEME[32A] on a [PVT32B]
this was before i downgraded my SPL to 1.33.2005
(BUT KEEP IN MIND)- I never downgraded my SPL until i moved over to SUPER D ROM
MY CURRENT STATUS:
-My Touch 3g - Tmobile
-Recovery-RA-sapphire-v1.5.2G
-Sapphire PVT 32B ENG S-OFF H
-HBOOT - 1.33.2005 (SAPP3000)
-CPLD-10
-RADIO - 2.22.19.26I
-APRIL 20. 2009, 15:30:43
*
-SD Card: Mirco SD 8GB
MY QUESTION
-Recovery-RA-sapphire-v1.5.2G
-Sapphire PVT 32B ENG S-OFF H
^Should my ENG S-OFF {H} Be {G}^-Or-^Should my Recovery be v1.5.2{H}
Or Should it be as is?
-As far as my other questions and concerns:
*Seeing i have a DANGER SPL Change From THE MY Original SPL*
- How would i go about UNROOTING to Original. (Before ROOTED) -
- APPSTOSD/SWAP: What should be the recommended Partitioning Sizes for -SD Card: Mirco SD 8GB
!!!.THANK-YOU 2 ALL For Giving The Time Out Of Your Day To Further Help XDA Users. Your Input, Valued Time, Hard-Work, & Creativity Are Greatly-Appreciated.!!!
- Lucas Sasser
mytouch is g for google branded like the amon ra thread says
alan090 said:
mytouch is g for google branded like the amon ra thread says
Click to expand...
Click to collapse
-------------------------
r3s-rt said:
First, that S-OFF H and you running a G recovery is just a miracle. I never got it to work. Your recovery should match that S-OFF H meaning you need to get Recovery-RA-sapphire-v1.5.2H not G. And I doubt you're going to change that H in your bootloader.
Second, (god I hate explaining this) you don't need death SPL. Especially for SuperD or Cyanogen, or for any other ROM for that matter. Only Dreams(G1) do.
Click to expand...
Click to collapse
-------------------------
anybody else's input...
cause i've heard t-mobile-htc mt3g w/google
R Both H Branded & G branded...
After reading this and becoming a little curious I looked into my phone
My-Touch 3g T-Mobile
Sapphire PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAP30000)
CPLD-10
RADIO-2.22.19.261
Apr 20 2009,15:30:43
In which I am running the RA-sapphire-v1.5.2G Recovery (Because well I assumed since my mt3g is Google branded it should be G)
Should I put the H recovery on? Would putting the H recovery on have any chance of bricking since my phone is supposed to be G?
My advice to you is, whichever one boots, you flash
fastboot boot nameoftherecovery.img
If it boots, flash it. Flashing recovery images is very safe, so don't sweat it.
Don't ask in a dev forum next time
Thanks for the quick reply.
G recovery has been working fine so I'll stay with it, unless theres any gains to be made by using the H.
SKnight said:
After reading this and becoming a little curious I looked into my phone
My-Touch 3g T-Mobile
Sapphire PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAP30000)
CPLD-10
RADIO-2.22.19.261
Apr 20 2009,15:30:43
In which I am running the RA-sapphire-v1.5.2G Recovery (Because well I assumed since my mt3g is Google branded it should be G)
Should I put the H recovery on? Would putting the H recovery on have any chance of bricking since my phone is supposed to be G?
Click to expand...
Click to collapse
EXTREAMLY GLAD TO HAVE A FELLOW CURIOUS ANDROIDER
anyway's looks as if were both running same setup, and both never seem to have issues...
but for your curious mind as well as mine; i found this to tickle my fancy
[to me its worded perfectly; but oddly]
brian colston said:
I see that HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Voldafone NL + UK + Australia)
but i have H not a G and is from Vodafone UK with Google branding on the back
I know its got PVT 32B but was not sure which one because of the letters
RAv1.0H : Use this image if your Magic is HTC branded (PVT 32A board)
RAv1.0G : Use this image if your Magic is Google branded (PVT 32B board)
so i know i have a H so i fastboot the RAv1.0H (Locks on Vodafone logo)
so i now know that even though i got a H i fastboot with RAv1.0G and works fine
working great now and thanks, just letting people know
B
Click to expand...
Click to collapse
So to me that reads just as it says, and we both are currently setup correctly.
-With That Being Said, I Feel I Can Finally Throw Out Some Of The Stress
-;Perfectionist
I also have a MT3G from T-Mobile in the US. I believe the orriginal SPL is:
Sapphire PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009, 19:06:41
I was wondering if anybody has had any problems running SuperD with the original SPL? Because I can't find any downloadable file for the original .0006 version, and don't want to void my warranty. I was thinking about installing SuperD 1.9.2, but it also sys it requires the .0005 Danger spl. Any thoughts?
cu2cool said:
I also have a MT3G from T-Mobile in the US. I believe the orriginal SPL is:
Sapphire PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009, 19:06:41
I was wondering if anybody has had any problems running SuperD with the original SPL? Because I can't find any downloadable file for the original .0006 version, and don't want to void my warranty. I was thinking about installing SuperD 1.9.2, but it also sys it requires the .0005 Danger spl. Any thoughts?
Click to expand...
Click to collapse
if you flash the needed spl and every have to send in to warranty... when u unroot the spl goes back to the original...
ceas909 said:
if you flash the needed spl and every have to send in to warranty... when u unroot the spl goes back to the original...
Click to expand...
Click to collapse
Have you tried this yourself? I can't see how flashing an spl would automatically be able to revert back to a previous version.
cu2cool said:
I also have a MT3G from T-Mobile in the US. I believe the orriginal SPL is:
Sapphire PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009, 19:06:41
I was wondering if anybody has had any problems running SuperD with the original SPL? Because I can't find any downloadable file for the original .0006 version, and don't want to void my warranty. I was thinking about installing SuperD 1.9.2, but it also sys it requires the .0005 Danger spl. Any thoughts?
Click to expand...
Click to collapse
I have the EXACT same readout as you, and I am able to flash EVERY ROM there is, the 0006 SPL is fine, dont change it
i think ENG (engineering) S-OFF (SECURITY OFF) is what they mean, you have an engineering spl.If you want to return to unrooted magic you need to flash an original sappimg.NBH which you can find all over these forums
cu2cool said:
Have you tried this yourself? I can't see how flashing an spl would automatically be able to revert back to a previous version.
Click to expand...
Click to collapse
rooting your phone is voiding the warranty;
thats why they have Guides to unroot incase anything goes wrong
so you will be able to return it without them knowing anything about voiding ur warranty...
as far as flashing or not flashing your spl... i cant help you out there.
but from my experience in reading and what im currently running.
flashing the spl makes it possible to flash anyrom, etc.
i never flashed super d rom until i flashed my spl. so i wouldnt know if it works without it.
i have been running super d since 1.0xx or 1.2 fersure.
now if u do flash ur spl which in my expreience if running super d is a defiant yes. you make sure you fllash the correct one!...
if your running a mt3g and need further assistance on getting correct downloads, ill point you in the right direction..
Thanks for the support. I've already found out that my .0006 is already an ENG spl, and I do not need to flash it to load custom ROMs. I have already tried SuperD, Fastest, Kingklick's, Cyanogen, MLIGN, and Enomther's ROMs. All work. After testing all these ROMs from Android 1.5 to 1.6 to 2.1, I am still looking for the perfect ROM.
I want something that is fast and stable as 1.6 ROMs, which have 1.) all the functionality as stock, 2.)has the Hero htc widgets, dialer, and facebook sync. If anyone know where I can find this PLEASE let me know. I keep running into pros and cons with each ROM, and just need to stick with something already.
your looking for a stable rom..
so whatever rom you choose make sure iits a stable rom...
and as far as pros/cons
just take note that with every ROM theres ganna be NEW RELEASES.
out of every rom, i suggest super d rom.
never any forcloses.., never any issues..
now i havent ran cyanogen for alongtime, never since i switchd to super d.
but i recommend him as 2nd choice in roms. but recommend him 1st in knowing what he knows.. he's the only dev. that i know and have seen thats ahead of the game, and knows the game. hands down.
im honestly awaiting a 2.1 STABLE release with no errors.
but thats still far from being developed...
Related
hey i have a google ion that i would like to put on the hero rom. i heard that you can get the full hero rom and just put it on your sd card and run it. i heard that you don't even need to have your phone rooted or unlocked or anything.
does anyone know where i can get this link? thanx...
Your phone is unlocked but you definitely needs your phone to be rooted.
ok
Ya I know ion is unlocked already, so do I have to run spl? Will the fatal1ty rom work on the ion? Cuz they're both Google branded rite? Yes I'm a noob to android. I was using windows mobile for so long before this, it seems to be a little different.
no all you need to do is flash the modified recovery image to the phone and use fatal1ty's great hero rom update.zip and flash. you will be up and running then.
so i use the Amon_RA modded recovery? then select fatal1ty's rom from the sd card and it's done? sorry bout all the questions, but i really would rather not brick my phone! thanx for your help
Yes that's all you need to do.
cool, thanx again
Dvice19, could you tell me what Radio you have on your Google ION phone? To check, simply hold down back and power to boot the phone from powered-off status.
My Google ION currently states:
Sapphire PVT 32b ENG S-oFF H
hboot-1.33.2005 (SAPP30000)
CPLD-10
RADIO-2.22.19.26i
Apr 20 2009, 15:30:43
I have applied a number of SPL, ROM and Radio changes. The radio in particular concerns me as I think I may have flashed the G1 version instead. If so this might explain why I'm having issues with Gmail not auto-synching.
yes tommy here you go:
SAPPHIRE PVT 32B DEV S-ON G
HBOOT-1.33.3004 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
APR 30 2009, 22:15:49
Well at least my radio is fine.
I wonder if it's the SPL that is causing me the grief? I have loaded Haykuro's Engineering SPL HBOOT-1.33.2005 signed update which I just noticed was for PVT-32A boards.
But the Google ION is a 32B board.
Could this explain why 3G is choppy and I no longer receive Gmail auto-synch, I wonder? Currently I have to force it on wireless network to get my emails. Yet strangely enough web browse and apps use internet 3g fine. Anybody have any thoughts on this?
And if I apply Engineering SPL HBOOT-1.33.2004 signed update does that mean I can no longer loadup the Hero ROMs?
More questions than answers
Your engineering SPL will let you flash any modded ROM (for 32B board). I didn't change my Ion SPL and I have flashed many different ROM's (Rogers, Hero, and modded Ion).
Wow. WOW. I flashed the Engineering SPL HBOOT-1.33.2004 and straight away my Gmail synchs. I email from my Yahoo, bam Gmail on ION finds it.
A huge warning then to those with Google ION phones: Do NOT flash haykuro's latest SPL on to your phone!*
Instead use your provided SPL or flash 32B-only SPLs like 2004. Here's what my phone now states:
Sapphire PVT 32B ENG S-OFF G
HBOOT-1.33.2004 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
Apr 9 2009, 23:29:17
*At least in my experience this is what was buggering up the gmail synch
Tags:
#spl #haykuro #google ion #gmail synch #synch problem #auto-synch
at least you got it working
UPDATE-15/08/2009 :
Please follow these instructions
anyone? help his hacking
This is what I got
cid: HTC__038???"
My phone Details
Sapphire PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
Radio-3.22.20.17
JUN 2 2009, 17:28:28
ON a Tmobile Mytouch 3G
cid: T-MOB010
Sapphire PVT 32B Ship S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
Radio-2.22.19.261
HTC Magic CID
HTC Magic Telkomsel Indonesia
cid: HTC__037xxx"
S=ON
where xxx are some garbled chars.
Amon_RA said:
UPDATE-10/7 : The above method gives "signature verify fail" on SPLs with S=ON... We should try to find a way to sign the package
Click to expand...
Click to collapse
Of course let's try every key we can, but don't you think the carrier would have restricted it to their signing key only?
Possibly another method that requires UID system that we could do on a terminal app?
Code:
echo 'boot-recovery' >/cache/recovery/command
echo '--update_package=SDCARD:update.zip' >> /cache/recovery/command
dumb question. Since everything on the mytouch is basically the same as the G1 (with the exception of the ROM), could we fool the NBH that was released for the G1 into thinking it's a myTouch Rom and use it to downgrade, gain root, then upgrade? I'll fully admit that it seems a little far fetched, but figured I'd ask.
Mi|enko said:
dumb question. Since everything on the mytouch is basically the same as the G1 (with the exception of the ROM), could we fool the NBH that was released for the G1 into thinking it's a myTouch Rom and use it to downgrade, gain root, then upgrade? I'll fully admit that it seems a little far fetched, but figured I'd ask.
Click to expand...
Click to collapse
no because then the nbh would fail the sig check
The Honorable Mr. Haykuro様 suggested that it should be possible to take an officially released signed-by-HTC NBH containing a hackable SPL, copy it to SD card using a card reader, and booting the phone while holding down the volume-down key. This should flash the SPL with one that allows fastboot.
not exactly sure what you need but when i do power + vol down, i get the 3 android on skateboard, then these txt show
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
MAY 27 2009, 19:06:41
this is a mytouch
jmaurice said:
The Honorable Mr. Haykuro様 suggested that it should be possible to take an officially released signed-by-HTC NBH containing a hackable SPL, copy it to SD card using a card reader, and booting the phone while holding down the volume-down key. This should flash the SPL with one that allows fastboot.
Click to expand...
Click to collapse
so your comment made me think this... we have a hero RUU right? and burried within that are the images for the hero...could we use the RUU but replace the images with our own?
jmaurice said:
The Honorable Mr. Haykuro様 suggested that it should be possible to take an officially released signed-by-HTC NBH containing a hackable SPL, copy it to SD card using a card reader, and booting the phone while holding down the volume-down key. This should flash the SPL with one that allows fastboot.
Click to expand...
Click to collapse
This is correct... so if anyone has one : please release it
sorry....timed out, didnt think it posted.
Any good news yet?
really want to install the new Hero ROM on my magic ..
flashing directly
A noob question ... can we flash the new HERO ROM to magic by pushing it directly without using the recovery image?
ari197 said:
A noob question ... can we flash the new HERO ROM to magic by pushing it directly without using the recovery image?
Click to expand...
Click to collapse
pushing it would require root, right?
no news update on this thread yet :-( i'm ready to write off this phone. practically nothing without the google suites of app and market app.
Ready to Donate $50 to the guy who roots. Otherwise the phone is useless. Help Please!!!
me too in the waiting ...
After purchasing htc magic in india, I too figured out that its SPL is the unfortunate one : HBOOT-1.33.0010 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12.
Though some options are available to install applications from:
1. http://slideme.org/applications
2. http://andappstore.com/AndroidApplications/apps/!index
3. http://www.openmarket.co.za/
But above are in no way comparable to Google apps,Market place.
Eagerly waiting for this SPL to be cracked .
count me in. ready to donate to anyone who could help bring life to this phone. btw, i will never buy an htc until i've visited xda-developers.
Hi all,
Finally today I got my hands on two RUU_Sapphire: Singapore ROM and Indonesia ROM with S=OFF!
For those who have been looking for ways to root HBOOT 1.33.0010, this might be your ticket.
My HTC Magic initially was HBOOT 1.33.0010 and did not come with any Google applications (no Android Market either). After update, it is now running with HBOOT 1.33.0009 and all Google applications are there including the Android Market. Exchange sync is also available.
Steps that I did:
1. You must have the HTC Sync software installed and working before running the RUU application.
2. Turn phone on and connect to computer with USB cable.
3. Run RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe. This turned the S=ON to S=OFF. Follow instruction to Update ROM.
4. Phone will reboot.
3. Run RUU_Sapphire_HTC_Asia_WWE_2.16.707.3_SG_release_signed_NoDriver.exe
I uploaded both RUU in RapidShare. Could someone pls download and re-host the files elsewhere coz RapidShare only allows 10 downloads of each files.
http://rapidshare.com/files/2673235....16.707.3_SG_release_signed_NoDriver.exe.html
http://rapidshare.com/files/2673315...a_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe
Flash at your own RISK! You could brick your phone by doing the above.
Good luck!
Thank youuu...
somebody upload to another server please, mediafire will be ok for me
Damn this the most easiest way...lol..long wait is worthed!...
you're the best man! i'm downloading it right now.
Seems like a much simpler way to get past the "Perfected SPL".
Running these steps will make the MyTouch 3G as simple to root as any other 32B right?
AFAIK..this for 32A, don;t know if it will work on 32B
Cursordroid,
As lesjaw pointed out, this is only for 32A board. I believe MyTouch 3G uses 32B board.
Adityaw/Lesjaw,
Finally we can do more with our HTC Magic. Good luck and pls share the outcome.
^
Yes..
Thanks to you..its like a miracle to me..
i'm downloading right now..and aditya will upload it to another server..i'm hoping indowebster...
So, finally ALL HTC Magics are rootable? great
cursordroid said:
Seems like a much simpler way to get past the "Perfected SPL".
Running these steps will make the MyTouch 3G as simple to root as any other 32B right?
Click to expand...
Click to collapse
Yeah, oops... I kinda misread the original post.
I'm 'that guy' now...
has anyone done this yet??
any has sucessfully done this step
my is
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
JUN 2 2009,17:28:28
WILL THIS METHOS WORK ON MY AIRTEL HTC MAGIC TOOO
THX IN ADVANCE
I bought mine in sweden with
HBOOT-1.33.00010 with S=ON
Buildnumber: 2.17.401.2 146733 CL#42748 release-keys
Is this what i need to do to be able to change get root access and flash new roms? Makes me afraid when the exe files says asia...
Sorry for beeing a n00b but i want to make sure before i make changes to my phone
ahmgsk said:
any has sucessfully done this step
my is
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
JUN 2 2009,17:28:28
WILL THIS METHOS WORK ON MY AIRTEL HTC MAGIC TOOO
THX IN ADVANCE
Click to expand...
Click to collapse
I can confirm that mine had the same HBOOT, PVT, and date. Not sure about the CLPD and Radio version.
ekindangen said:
i can confirm that mine had the same hboot, pvt, and date. Not sure about the clpd and radio version.
Click to expand...
Click to collapse
plz confirm the remaining too
otherwise my 27k will go in **** hole
ahmgsk,
My Sapphire is PVT32A SHIP S-ON H
CPLD-12
Radio-3.22.20.17
My HBOOT is now 1.33.0009 (previously 1.33.0010) and date is May 8 2009, 21:02:32 (previously Jun 2 2009).
Nice thing with this RUU file is that it will refuse to update the ROM if it detects incompatibility. It rejected my first attempt where I started with the wrong RUU file.
Good luck.
Does this mean that once SPL changed........we can just pop in any modified ROm from this forum (including hero) and update ...essentially it will be rooted???
thx yar
ekindangen said:
ahmgsk,
My Sapphire is PVT32A SHIP S-ON H
CPLD-12
Radio-3.22.20.17
My HBOOT is now 1.33.0009 (previously 1.33.0010) and date is May 8 2009, 21:02:32 (previously Jun 2 2009).
Nice thing with this RUU file is that it will refuse to update the ROM if it detects incompatibility. It rejected my first attempt where I started with the wrong RUU file.
Good luck.
Click to expand...
Click to collapse
thx i will try it tonite only
SPL: 1.33.0010 Build number: 2.16.720.2
Will this method work for
SPL: 1.33.0010
Build number: 2.16.720.2
??
ekindangen said:
ahmgsk,
My Sapphire is PVT32A SHIP S-ON H
CPLD-12
Radio-3.22.20.17
My HBOOT is now 1.33.0009 (previously 1.33.0010) and date is May 8 2009, 21:02:32 (previously Jun 2 2009).
Nice thing with this RUU file is that it will refuse to update the ROM if it detects incompatibility. It rejected my first attempt where I started with the wrong RUU file.
Good luck.
Click to expand...
Click to collapse
soo wierd, i got same cpld and radio and spl but i get an Error: Customer ID-Error or something like that after the program uploaded the update file
EDIT: Think i got it to work! Just needed to change SD to a Gold Carded...
ekindangen said:
ahmgsk,
My Sapphire is PVT32A SHIP S-ON H
CPLD-12
Radio-3.22.20.17
My HBOOT is now 1.33.0009 (previously 1.33.0010) and date is May 8 2009, 21:02:32 (previously Jun 2 2009).
Nice thing with this RUU file is that it will refuse to update the ROM if it detects incompatibility. It rejected my first attempt where I started with the wrong RUU file.
Good luck.
Click to expand...
Click to collapse
What RUU file did you use? I have the exact same version as you do/did, but it won't let me. Is it because I have an Europe version? (Asia in filename)
Hi guys! just brought a G2 fews days ago.Here is my G2 status :
PVT 32A ENG S-OFF H;(SAPP10000)
HBOOT-1.76.2007
CPLD-12
RADIO-6.35.07.29
O.S. 1.5 cupcake + UI Sense (i dont needed)
Its seems up to now there is no solution to root the machine after i read tremendous articles.
The is no difference between bricked and unrooted magic coz too many restriction applied.
I am so disappointed with my Gphone..coz its not a convenient phone for everyone which somehow i think WM is much better...at least you dont have to go through a complex procedure to gain higher acess right which i belonged to..
Anyone know how to rooted this crap? Please tell me with many thanks !
Don't post messy thread!!! If you don't understand process of flashing, you will probably kill your phone.
Read forum, try to get more patience.
After all, you can simply flash any ROM with tag [radio 6.35] - CursorSense, Gyd [6.35] or other... they are with root
OHow can you flash any Rom when security status is on ?
S-on .pls tell me!? Others said h-boot 1.76 version is a prefect spl. I just wonder you can flash any Rom sucessfully
You must be kidding!
You wrote that you have HBOOT-1.76.2007 which is an engineering SPL with S-OFF (it's even written on the first line of the fastboot info you provided). The one people have problems with is 1.76.0007 which is a perfected SPL. You should read more carefully next time.
You can already do everything you want with this phone and I'd be surprised if you didn't have root access already as the installed system is probably Cursorsense (this is only a guess but it's been the only one able to run on this Radio version until recently). I'd also bet there's already a custom Recovery on it (boot the phone holding home+power to check that).
With this setup you can flash any ROM that is compatible with the 6.35 Radio but you can also revert to an older Radio/SPL combo if you need to.
Check the main thread about this setup. It also explains the downgrading procedure. Check the wiki if you need more basic knowledge before proceeding.
lol .. ur phone is already root enabled ( u likely have bought a used phone )
just flash the proper recovery and rom and ur done
this is the recovery guide from curserdroid's thread :
Custom Recovery RA-Magic32A-6.35-v1.5.2
Mounts SD card immediately, based on RA-Sapphire-v1.5.2H
Highly recommended!
Flash through FASTBOOT
Code:
fastboot erase recovery
fastboot flash recovery recovery-RA-Magic32A-6.35-v1.5.2.img
fastboot oem powerdown
Click to expand...
Click to collapse
Its seems up to now there is no solution to root the machine after i read tremendous articles
Click to expand...
Click to collapse
what did u read exactly ?!
kathz said:
Hi guys! just brought a G2 fews days ago.Here is my G2 status :
PVT 32A ENG S-OFF H;(SAPP10000)
HBOOT-1.76.2007
CPLD-12
RADIO-6.35.07.29
O.S. 1.5 cupcake + UI Sense (i dont needed)
Its seems up to now there is no solution to root the machine after i read tremendous articles.
The is no difference between bricked and unrooted magic coz too many restriction applied.
I am so disappointed with my Gphone..coz its not a convenient phone for everyone which somehow i think WM is much better...at least you dont have to go through a complex procedure to gain higher acess right which i belonged to..
Anyone know how to rooted this crap? Please tell me with many thanks !
Click to expand...
Click to collapse
Retarded. How shameful the newbie asking the questions without looking between 1.76.0007 (Perfected SPL) and 1.76.2007 (Engineering SPL)
The 1st thread i mentioned my phone status is incorrect(mistake). truly sorry about that.
PVT 32A ENG S-ON H;(SAPP10000)
HBOOT-1.76.0007
CPLD-12
RADIO-6.35.07.29
O.S. 1.5 cupcake + UI Sense
Can anyone pls tell me how to root this phone ??
Please...give me some hint...coz i dont to want to sell it to buy i-phone.
some android application is very useful and handy..all i need is to rooted the phone in order to run those application.
Please dont be upset an angry and accept my apology of the incorrect information i provided.
For now there is no way to change the 1.76.0007 perfected SPL and so you can' t gain root privileges. You' ll have to wait until a newer ROM version is released from HTC, in order to use the goldcard method to change your perfected SPL. Or until someone finds an exploit for the particular SPL.
I have a too stranger Device, originally come from:
SAPPHIRE DVT 32B SHIP S-OFF H
HBOOT-1.33.0010 (SAPP10000)
CPLD-6
RADIO-3.22.20.17
So,
I need to know what is the procedure to upgrade the ROM?
because i'm finded here, procedures to 32A H, 32B G, but not to 32B H.
So, i'm confused about What I will use, and after that, What ROM can I chose? H/G? 32A/32B?
Please, Help, I'm trying and trying to find a solution to upgrade that device.
Thanks,
Allan
What is the device? A HTC Magic, T-Mobile MyTouch 3G (v1), T-Mobile MyTouch 3G Limited Edition, or MT3G v1.2 (headphone jack).
Can't really give you any direction without knowing what the brand/model of the phone is, just o make sure we're not giving you advice that would automatically brick your phone.
For example on my fender there's only one real way to root it, which requires installing an engineering SPL, which turns it into a 32B/H, but then once you flash the correct radio/hboot/recovery onto it, it reverts back to being a 32A/G.
kbeezie said:
What is the device? A HTC Magic, T-Mobile MyTouch 3G (v1), T-Mobile MyTouch 3G Limited Edition, or MT3G v1.2 (headphone jack).
Can't really give you any direction without knowing what the brand/model of the phone is, just o make sure we're not giving you advice that would automatically brick your phone.
For example on my fender there's only one real way to root it, which requires installing an engineering SPL, which turns it into a 32B/H, but then once you flash the correct radio/hboot/recovery onto it, it reverts back to being a 32A/G.
Click to expand...
Click to collapse
Is a Brazilian Magic the product ID is: SAPP100 (removing the battery, i see toguether IMEI)
allanwinckler said:
Is a Brazilian Magic the product ID is: SAPP100 (removing the battery, i see toguether IMEI)
Click to expand...
Click to collapse
Assuming you haven't already accidentally flashed the wrong SPL on it, you should be able to flash a 32B Engineering SPL (2005) in order to fix the perfected ROM, and grab the RAmon-Recovery 1.62H. But its a Magic 32B which is pretty common (despite H or G), though haven't seen a 3.xx radio on a 32B though...
Probably wait to see if someone follows up on the thread.
allanwinckler said:
I have a too stranger Device, originally come from:
SAPPHIRE DVT 32B SHIP S-OFF H
HBOOT-1.33.0010 (SAPP10000)
CPLD-6
RADIO-3.22.20.17
So,
I need to know what is the procedure to upgrade the ROM?
because i'm finded here, procedures to 32A H, 32B G, but not to 32B H.
So, i'm confused about What I will use, and after that, What ROM can I chose? H/G? 32A/32B?
Please, Help, I'm trying and trying to find a solution to upgrade that device.
Thanks,
Allan
Click to expand...
Click to collapse
Whoa, you better read up on that one, I mean it, it has a DVT board not the PVT be very careful. Most all bricked I believe.
carz12 said:
Whoa, you better read up on that one, I mean it, it has a DVT board not the PVT be very careful. Most all bricked I believe.
Click to expand...
Click to collapse
Thanks,
Yes I bricked one.. this is the second i'm trying..
what is the diference from PVT to DVT?
kbeezie said:
Assuming you haven't already accidentally flashed the wrong SPL on it, you should be able to flash a 32B Engineering SPL (2005) in order to fix the perfected ROM, and grab the RAmon-Recovery 1.62H. But its a Magic 32B which is pretty common (despite H or G), though haven't seen a 3.xx radio on a 32B though...
Probably wait to see if someone follows up on the thread.
Click to expand...
Click to collapse
Thanks,
So, What is the first Step? change radio? spl?
allanwinckler said:
Thanks,
So, What is the first Step? change radio? spl?
Click to expand...
Click to collapse
Based on the new information provided, look for a thread specifically dedicated to the DVT boards. The only thing I can really find in google about DVT is that its seen on G1 boards, and that most standard instructions would brick it.
kbeezie said:
Based on the new information provided, look for a thread specifically dedicated to the DVT boards. The only thing I can really find in google about DVT is that its seen on G1 boards, and that most standard instructions would brick it.
Click to expand...
Click to collapse
I can't finded thread dedicated to DVT, only some dicussions but not conclusions..
kbeezie, I noticed I have the same phone you do, what steps did you take?
Edit: I only ask because I can find anything with 1.33.0013 specifically and do not wish to brick, and you seem to know what you are doing.
mytouch 3g 1.2
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
Radio-2.22.23.02
Oct 21 2009,22:33:27
WingnutLord said:
kbeezie, I noticed I have the same phone you do, what steps did you take?
Edit: I only ask because I can find anything with 1.33.0013 specifically and do not wish to brick, and you seem to know what you are doing.
mytouch 3g 1.2
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
Radio-2.22.23.02
Oct 21 2009,22:33:27
Click to expand...
Click to collapse
It's the link in my signature, notice how "Rooted" is a hyperlink?
In short:
1) Make a goldcard
2) flash the engineering 2010 SPL
3) flash the stock radio/hboot and 1.6.2G recovery provided in the thread
4) boot into Recovery, flash the rooted stock rom from the provided zip
At the current moment only the stock 1.6 rom works, there are no fully working custom roms yet until either T-Mobile releases an OTA update for 2.1, or until HTC releases the kernel source.
Thanks you are awesome!