Related
Hello this is my first post.
I have recently been trying out various WM6.1 roms and now have the issue where I can only use GSM (G3 and HSPDA just don't work)
I have tried various radios and downgrading to a reconstructed stock rom. However nothing seems to work. From reading other threads it seems to be a hardware issue, so I need to restore it back to the original settings for repair.
I have the original OS on now, but need to now put back on the original radio and SPL version; however I don't know which versions these are. Also I have a custom start screen so need to go back to the original T-mobile one as well. Any help on how to do this would be appreciated.
Thanks.
I had a problem like you aswell; after upgradig my sound just went away, even after installing the radio. What I did was flash my TYTN2 with the official 6.1 rom (radio included). It's in of the threads, I don't think it'll take you too long to find it =)
Hope that helps!
I have tried various combinations of the original (6.1 and T-mobile) roms and radios and nothing seems to work.
I think that one of the radio roms may have fried my G3/HSPDA chip. GSM works fine but I bought the phone for hi speed data and now can't use it. If any one knows a software fix for this it would be billiant. However at the moment I think I will have to wait until T-mobile bring out a rom so I can restore the SPL & splash screen from that. (hope that wont be to long)
Any other suggestions welcome as I will try anything to get this problem sorted.
idenmark said:
I have tried various combinations of the original (6.1 and T-mobile) roms and radios and nothing seems to work.
I think that one of the radio roms may have fried my G3/HSPDA chip. GSM works fine but I bought the phone for hi speed data and now can't use it. If any one knows a software fix for this it would be billiant. However at the moment I think I will have to wait until T-mobile bring out a rom so I can restore the SPL & splash screen from that. (hope that wont be to long)
Any other suggestions welcome as I will try anything to get this problem sorted.
Click to expand...
Click to collapse
Radio 1.27.12.11 should work fine
How did this finish? Have you sent back your device or did you have it working? Did you find, if yes, where did you find the SPL and Splash screen?
Let me know, thanks in advance!
I decided to wait until the new T-mobile rom came out with proper SPL / Radio, and just stick with GSM.
I couldn't find either the proper SPL or splash screen. I think these need to be extracted from a proper T-mobile ROM.
However after 4 days G3/HSPDA just started working again. I didn't change the rom or radio (just stuck with Sluth's WM6.1). I must conclude that it was something to do with T-mobiles network settings that they resolved.
Phone stuck in cyclic restart after Radio ROM upgrade!
Hi all, I just loaded a new radio ROM (1.12.25.19) onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load (I have done several radio ROM upgrades without any bother)
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
Any ideas? Or do i now have a very expensive door wedge
Have you tried flashing again from SD? Maybe that will help.
Doug M.
Yup - I tried to flash from SD but all I get is a message saying "no image found" and then I stay in bootloader, it looks like it's not reading from the SD card properly. I reckon if I can get it to boot from the SD all will be well (I hope
Any ideas??
Are you using a cdma phone? Do you have a raphael?
Hi Farmer Ted - it's a GSM Raphael and not a CDMA phone, thats why i'm surprised the ROM flash failed!
Weird; all I can recommend is trying to flash a stock, shipped rom. Hope you get that sucker working again! What rom are you using? Does it have a newer rilphone in it? I'm just grasping at straws, but maybe if you you a 1.14 rilphone, it doesn't play nice with a 1.12 radio.
Farmer Ted said:
Weird; all I can recommend is trying to flash a stock, shipped rom. Hope you get that sucker working again! What rom are you using? Does it have a newer rilphone in it? I'm just grasping at straws, but maybe if you you a 1.14 rilphone, it doesn't play nice with a 1.12 radio.
Click to expand...
Click to collapse
Now you mention it I do have the 1.14 rilphone installed!! How do I get the damn thing to work again? a few people have mention trying to reflash the entire phone via SD, thanks! I think you may have found the problem - now all i need is the solution!
Can you get into bootloader? If so, just try flashing one of the stock roms (that has a radio with it) over the usb connection. If you can't do that, then do an sd card flash. 1 GB cards seem to work the best (that's what I use).
Farmer Ted said:
Can you get into bootloader? If so, just try flashing one of the stock roms (that has a radio with it) over the usb connection. If you can't do that, then do an sd card flash. 1 GB cards seem to work the best (that's what I use).
Click to expand...
Click to collapse
Farmer Ted - cracked it! For some reason the SD instal would not work (i tried all my cards incl a 1GB as suggested) and then tried the USB method - and it worked!! Have now got my phone back !!
I owe you a large cyber-beer !!
Awesome! Glad I didn't screw your phone up any worse, lol.
Hello,
Please help if you can! I updated my Nexus S to 2.3.4 the other day, and everything was working fine. Today, the phone at some point lost the ability to connect to my network (Bell Mobility). I was out and about and was turning data off, and might have hit the 2g/3g toggle by accident, and seem to remember reading about that causing problems - though I have no idea if I did for sure (the sun was bright) and am honestly not sure what's wrong EDIT: when I go into wireless & networks\mobile networks\network operators, the phone will only recognize Roger's Wireless (and it was bought at a Telus store!) The UI still works fine, and I can still connect via wifi - just no way to get it to recognize Bell's network
As stated above, everything was working fine this morning - voice, data and sms all good. Here is all the info from my phone:
Android version 2.3.4
Baseband version NO DGSXXKD1
Kernel Version 2.6.35.7-ge383d80 [email protected] #1
Build number GRJ22
The bootloader is unlocked, and I had been running CM7 before flashing the manual 2.3.4. I'm not sure what to do. Tried re-flashing the manual 2.3.4 update.zip, and nothing. I know a very little bit about rooting/flashing (just enough to follow guides), and am wondering whether I need to re-flash a different kernel/radio/rom or something. I did search, and couldn't find anything that outlined my problem exactly (I do apologize if something is out there and I just didn't look hard enough).
Again, the phone was bought new at a Telus store, and found the Bell Mobility network out of the box no problem. Am hoping someone can help!
Thanks so much for reading, and if you are able to help.
Check your APN's to make sure the data info is in there I had to manually enter mine (bought phone from Telus to use on Bell/Sasktel's network) for Sasktel and bob was my uncle
Every upgrade i need to put them back in. No automatic for me, so i would start there
Menu - Settings - Wireless & Network - Mobile Networks - Access Point Names.
If nothing is in there, you need your APN settings. Talk to bell support for the info, and they should be able to help you over the phone (they support android even if they dont sell a Nexus S)
Cheers!
Thanks so much for your response, though I don't think that the APN's are the issue at all; they're still in there and fine. I think that it's the actual radio (or baseband), as the phone will not recognize the bell network, only the Rogers network (and it was bought new at a Telus store!)
I think that I need to re-flash the radio, and maybe the kernel. I searched to try and find the radio image for my phone, but haven't found anything clear enough for me to be comfortable to try - I've read time and again that flashing radios is one of the riskier things to do. I don't think that my phone is bricked (can still boot it up, and all of the ui works and can connect via wifi). Don't want to risk doing more damage.
Thanks again for your response though!
i think i'm having the same problem. i've manually upgraded to 2.3.3 then to 2.3.4. and then i put a sim card in - not used it as a phone before this.
i can get 3-4 white bars lit up but can't connect to any network. the bars turn green when wifi is active, but still can't connect ("can't connect at this time. please try again later" toast appears). not sure if the phone is borked, or if the upgrade wasn't that successful.
I actually have this same issue but using it on at&t in the USA...Really hope it isn't broken cause I have no way to fix it since i'm not in canada
Maybe check if the 2g box is checked in mobile networks. Check your apn settings and if that doesn't help try and flash another radio.
Sent from my Nexus S using Tapatalk
djnoicatse said:
Maybe check if the 2g box is checked in mobile networks. Check your apn settings and if that doesn't help try and flash another radio.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
i'm unrooted, and don't intend to root. apn is fine as suggested above, and regardless of 2g checked or unchecked, still no connect
Rogers is the only 2G gsm provider, your phone may be stuck on 2G. If you have the choice, I would go back to 2.3.3 full stock and see if everything then works.
Sent from my Nexus S
Matridom said:
Rogers is the only 2G gsm provider, your phone may be stuck on 2G. If you have the choice, I would go back to 2.3.3 full stock and see if everything then works.
Sent from my Nexus S
Click to expand...
Click to collapse
but you have to root to flash 2.3.3 right?
MarkusPO said:
but you have to root to flash 2.3.3 right?
Click to expand...
Click to collapse
No. you are best to use cwm and restore a stock image for your phone
Sent from my Nexus S
Your best option is to flash back to 2.3.3. Download rom manager from the market and flash clockwork recovery. Once in recovery flash the 2.3.3 .zip file. I saw it somewhere here but i forgot where I saw it. Hope that helps.
Sent from my Nexus S using Tapatalk
Try this http://devsforandroid.com/index.php?board=18.0
I'm NOT SURE if it'll work, but it's worth the try. Make sure to to wipe everything before you flash. I'm not responsible for any damage this may cause. But I hope this helps you out.
If anyone wants to chime in and correct me please do so.
Sent from my Nexus S using Tapatalk
Or if you're not comfortable flashing the stock 2.3.3 rom maybe just try and flash back the xxkb2 radio which I believe was the stock baseband for Rogers, telus, Fido and bell. I have the .zip file for you to try and flash through CWM if you need it. Otherwise you can find it somewhere here aswell.
Sent from my Nexus S using Tapatalk
i'm not looking to root nor use any 'hacks'. i don't trust them.
under the battery, the phone is just a i9020. no letter afterwards.
Flashing a ROM doesn't require root, it requires unlocking the bootloader, which Google officially allows you to do that. You can unlock the bootloader, flash 2.3.3 ROM, then lock it as if it had never been unlocked. Just keep in mind that unlocking resets to factory default and wipes your SD card clean, backup before you do it.
Ahhh yes, I had same thing except with Telus I fixed it once, but the second time I could not get it to work, do this, flash this radio
http://forum.xda-developers.com/showthread.php?t=1044261
it is the stock radio your phone came with, then call up bell and get them to "repush" your sim card... hopefully you will see your network again.
Si_NZ said:
Flashing a ROM doesn't require root, it requires unlocking the bootloader, which Google officially allows you to do that. You can unlock the bootloader, flash 2.3.3 ROM, then lock it as if it had never been unlocked. Just keep in mind that unlocking resets to factory default and wipes your SD card clean, backup before you do it.
Click to expand...
Click to collapse
if i unlock to then flash, don't i need a radio package? how do i know which one to use?
also, would i be able to do a full compile of android and flash that?
MarkusPO said:
if i unlock to then flash, don't i need a radio package? how do i know which one to use?
also, would i be able to do a full compile of android and flash that?
Click to expand...
Click to collapse
It depends on which ROM you flash. I flashed the official 2.3.3 ROM, it contains the radio image, it'll flash it as you apply the update.
Do you remember which baseband version it came with out of box? That should give us hint as to which radio applies to your phone. I think there are really only two types of radios used except NS 4G, 850/1900/2100 (i9020A radio) and 900/1700/2100 (i9020T radio). You can ask your service provider or check out their website which band you are running on.
Back to flashing ROM, I just realised you don't even need to unlock the bootloader if you are flashing Google signed files. You should most likely be able to flash a 2.3.3 full ROM, then flash the 2.3.4 update file. But if you find the 2.3.4 full ROM, that's even more convenient. I saw a full ROM on the forum, but I that was for i9023 or i9020. Not too sure, maybe others know.
For the Canadian carriers, as stated before, Rogers is the only 2g (edge) carrier all others (Bell, Telus, Sasktel) are 3g (HSPA). go Settings>Wireless & network settings>mobile networks and ensure "Use only 2g networks" is not selected.
If this does not work flash the KB2 modem, the other modems may lose 850mHz spectrum which could be causing your grief.
Solution!!! (At least this worked for me!) - Didn't have to flash anything
Hey all,
I apologize for not posting this sooner, but found a solution that worked for me, hope it might work for others experiencing the same problem.
**PLEASE keep in mind that though this worked for me, I don't know if it will work for you (maybe it might make things worse for some people). Especially keeping in mind that I DON'T KNOW FOR CERTAIN what originally caused the issue for me, nor what specific factors (rom build, phone model, radio image, etc) might have contributed. As well, I am on the Bell Network. USE ANY OF WHAT'S STATED BELOW AT YOUR OWN RISK. Disclaimer stated, read on...**
In the dialer, I punched in *#*#4636#*#* and then from the menu that popped up, selected Phone Information.
From there, in the Set preferred network type: drop down menu (scroll down a little, you'll see it) I selected GSM/CDMA auto (PRL). **Again, remember that I'm on the Bell Network in Canada. Should you be trying this, these settings might not be for you. Again, AT YOUR OWN RISK**
Then, still from the Phone Information screen, I pressed menu button (the hard menu button on the phone), and then chose the Select Radio Band option. From there, I believe I selected Auto, though I may have selected USA (It's been a couple of days, and I can't remember, I apologize).
After that, went back to the Phone Information menu, and pressed Run Ping Test. It seemed to show all of the necessary (and appropriate for my network) settings as ok, and... everything worked!!! Full network connection as before!
Hope this might help someone else! Keep in mind that I'm not sure what caused the original problem; I do believe I remember pressing the 2g/3g toggle, and also remember reading somewhere that this can cause problems. Specifically, that it stopped peoples phones from going back from 2g to 3g - in my case (Bell Mobility) there is no 2g network to drop down to, so if it got stuck on EDGE mode, it probable looked for the only local carrier with a GM EDGE network, (Rogers) and got stuck there. Not sure, but maybe this is what happened. Any wise folks out there that might be able to confirm/offer insight?
Anyhow, thanks so much for all the responses and offers of help!
Please bare with me since this is the first time having to post for an issue since I usually find an answer on your forums
So here's the situation.
I bought the photon q 4g lte from ebay and it came with the unlocked bootloader.
Needless to say it was with the stock ics and i tried to find a jellybean update because it wasn't taking the ota and ended up going with cyanogen since i had no problems before. However those phones i had before were with sim cards not cdma.
I found out i couldn't update prl or profile manually without having to do something on the pc.
So after searching left and right i found i could use rsl lite (I used 6.1.5) and eventually found the "stock" file from this post
http://forum.xda-developers.com/showthread.php?t=2095536&highlight=rsd+lite
I did the stock jellybean, got it to go through the process and it booted up with no errors.
However, when it boots into the os it pops up a force close on omadmclient_sprint_dataservice and eventually also on the process com.android.phone.
I tried putting it in airplane mode to see if the service error would go away but it didn't work for the process part crashing.
I tried re-flashing, deleting cache in recovery, doing a data/factory reset in recovery and the one time i was able to do a data factory reset within the settings menu.
I could not find anyone that said they had a rom that worked with sprint and updating prl within the rom, if anyone knows of one let me know and i will flash it through rsd.
Otherwise does anyone have an idea of what could be happening because googling the omadmclient part did not pull up anything specific and pulling up the process issue for other phones has not helped me either.
Was this a hacked GSM phone, or are you using it as CDMA?
I've never heard of people having FC issues after flashing a FXZ from RSD. Which one did you flash? Android 4.1.2 - Sprint US - 9.8.2Q-122_XT897_FFW-5 (No simlock) ?
If you are on stock, you should be able to update the PRL within the ROM.
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
crispy6 said:
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
Click to expand...
Click to collapse
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
arrrghhh said:
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
Click to expand...
Click to collapse
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
crispy6 said:
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
Click to expand...
Click to collapse
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
arrrghhh said:
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
Click to expand...
Click to collapse
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
crispy6 said:
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
Click to expand...
Click to collapse
To downgrade to ICS, you need to remove some additional lines. See this post for more information on that.
However, you should be able to update the PRL on either stock ROM.
I think I said this before, but I will say it again. You need to do PRL updates, activate the phone, and get EVERYTHING working on stock BEFORE you flash ANY custom ROM. This is just standard practice - you don't want to put the cart before the horse! Get the phone working, then play with custom ROM's.
Kind of long, but it's just a difficult explanation, please read and try to help me. Thank you.
Okay, so I have a really weird problem, and I can't seem to fix it at all. I unlocked the bootloader and rooted my Sprint Motorola Photon Q, and had no problem with data loss, then I flashed PAC Man Rom, and everything went fine and it flashed but then I noticed that I had no data. No 3G, 4G, or 4G LTE, the phone lost network signal, but what was weird is that I could still receive texts and phone calls.
So, then I read that wiping the Dalvik and the regular cache would fix it, and it didn't. Then, I also tried flashing a different ROM which also didn't fix it. I RSD back to stock firmware and the problem was gone. I even tried rerooting and just installing a different ROM but, it still had the same issue, so I just went back to stock again.
Can someone please help me fix this? I've looked everywhere and I can't really find anything to help me out with this.
Thank you in advance.
Is your provider Sprint as well...?
I'm not sure, data works here on custom ROM's... which version are you flashing? Have you tried CM11?
There's some new device unification going on, the newest KK builds are going to be under the "moto_msm8960" device instead of xt897...
No I haven't tried CM11. Where do I find the IMG for it at?
I have Flash Wireless, which is Sprint prepaid. I have tried CM11 and still nothing. I don't understand what is going on....I'm getting real frustrated because I want to put a good custom ROM on my phone....
thebizerker2014 said:
I have Flash Wireless, which is Sprint prepaid. I have tried CM11 and still nothing. I don't understand what is going on....I'm getting real frustrated because I want to put a good custom ROM on my phone....
Click to expand...
Click to collapse
Perhaps that's the issue. Did you check your APN settings? Is it using Sprint's network?