Hello,
I am the newbie of flashing cooked Rom in my Kaiser. I have checked the Wiki and flashed the cooked Rom successfully. Then, I found that I need to upgrade the radio since the version is too old (The Radio is for WM6.0 and the cooked Rom is WM6.1). However, the Wiki and some posts tell me to upgrade the radio by using the MicroSD card ONLY. Is there any method to upgrade the radio other than using MicroSD card?
Thank you very much!
Regards,
Jacky Luk
why would you need any other method?
i flash roms/splashes/radios using the sd card and think its the best way.
Because I do not have the MicroSD card in my hand now!
i think you can flash the radio the same method you flashed the rom...
or just buy the sdcard
Actually, can I use the generic Rom flashing method to flash the radio since I found that the downloaded radio contains the KaiserCustomRUU.exe and KAIS_1.71.09.01.nbh? In other words, can I flash the radio by executing the KaiserCustomRUU.exe when the Kaiser is connecting to the host computer through the Microsoft ActiveSync?
Run the radio file the same way you would flash your ROM from the PC. Make sure you are certain you have a radio ONLY file though. Or else you might just flash a new rom as well.
Thank you very much!
would this be possible? it would be just like flashing a rom.
It depends...
For an install then, yes, it should be possible, what you would need to do is get a copy or your orginal shipped ROM, take out the OEM SPL and add the the Hard SPL to the image and flash that image via your SD card.
For an upgrade it is also possible, but requires a SSPL image to be created that is loaded to the SD card that boot's an SSPL and then flashes the Hard SPL from an Image. It has been done for the Kaiser, but it isn't easy work.
Neither of these are that easy, and I am not guaranteeing they would work :0
Ta
Dave
IPL 4.10.002
Hera110
One need to flash russian ROM
Made HARD SPL yang 4.70 everythinw went ok
Tried to flash official rus rom. MODEL ID invalid
Deleted spl.nbh from the directory--the same
Then tried to flash via card HERALD.ASerg.Micro4.WM61R.WWE.SD.LZX.03.12.90
But nothing happens.
I made goldcard with qmat, security=0,
Copy 2 files hearimg.nbh and heradiag.nbh
but entering bootloader, nothing happens, just as usual bootloader
You've posted the same thing TWICE. Please refrain from doing so. This could result in a day ban if it were up to some.
There is no reason to post twice.
You can't flash the official RUU when your hardSPL unless you use USPL and it will erase the HardSPL. (or using the goldcard.)
If nothing happens when you go into the bootloader, your SD card is not formatted properly or is too slow.
There are many threads on this.
i followed all of the instructions on the unlockr to unroot, then root, then add a custom ROM
i chose to use the latest evil hero ROM, but it was so slow and slugish, it was practicably inoperable
so, i did a wipe, and tried flashing the latest cynogen rom.
but it always aborts the installation
i re-partioned, tried the backup nandroid 2.2, everything
what should i do to fix this problem?
my friend is coming over today, and he also has a mytouch, could i use his SD card to load another ROM on to it and then put the SD card into my mytouch?
any kind of help would be greatly appreciated, as my phone is not even working right now, and i need it
Hello Guys.
About a lot of months i flashed TPCs Stocklike Rom to my device. Now i thought it might is time for an update.
But i got a huge problem :
When Flashing an other rom the device comes to bootloader and starts transfer/unpacking/whatever up to 100%.
After that my old TPC Rom reboots again.
What can i do?
Very much thanks for help
Copy the new rom that you want to flash onto the root of your sd-card and rename it to kaisimg.nbh. Reboot your phone into the bootloader and re-flash. That should do it.
Try flashing back to your stock rom first.
I already tried flashing the stock... that did not work for me.
Blinkydamo i flashed using the SD Card. The Screenshows update success.
Then i do a softreset an the old TPC rom boots again.
I already tried flashing the stock... that did not work for me.
Blinkydamo i flashed using the SD Card. The Screenshows update success.
Then i do a softreset an the old TPC rom boots again.
Any other ideas how to solve my problem ?
Put your phone into bootloader screen and see what it says for hardspl, maybe you just need to upgrade your hardspl.
3.29 - Flashing a new HardSPL doesnt work too
Most ROMS don't have new boot screens, some of the Chefs cook them in but others don't, are you sure it isn't just the old boot screen you're seeing, if the ROM flash has reached 100 % the Flash must have worked ?
StewD said:
Most ROMS don't have new boot screens, some of the Chefs cook them in but others don't, are you sure it isn't just the old boot screen you're seeing, if the ROM flash has reached 100 % the Flash must have worked ?
Click to expand...
Click to collapse
however,he says that he has flashed stock rom. stock rom changes splash with "smart mobility" black splash
Well is my phone unfixable ?
have you checked spl version in bootloader as denko7 said?
same problem
I am having the same problem.
MTTY says that BLOCK 1639 (0x667) is a bad block. Everytime I flash something (a new rom, stock rom, spl), it goes to 100% but it doesnt change anything as if i havent flashed. I am using TPC 11 rom, somtime it says that storage memory is full, and then when i do reset, everything is gone as if I did a master reset.
I am using TPC 11 rom
What SPL and Radio you have!?!?!
For me its spl 3.34 and radio 1.65.
i have HARD-SPL 3.29. Radio is 1.71.09.01
try to leave Sd card and flash with cable.
af974 said:
try to leave Sd card and flash with cable.
Click to expand...
Click to collapse
If you still have an old rom on your SD and put a new rom on there and try to flash, the phone will flash the first available file. If flashing using SD card , make sure that you have deleted all other rom image files first.
I was trying this how to :
http://forum.xda-developers.com/showthread.php?t=371154
but the commands listed are not working for my MDA Vario III (T-Mobile Brand).
For me task 8 = Reboot
I found out, that task 28 = Format
I got following output :
Code:
Cmd>task 28
Format start
Storage start sector=0x84C0, total sector=0x125C0
Storage start block=552, total block=1175
Total Bad Block in CE: 3
Erase physical block from 845 to 1999
si backup: Erase physical block from 2032 to 2048
But even after that im not able to flash a new rom.
Was that the right format?