how to flash rus rom into T-mobile WING - Wing, P4350 ROM development

IPL 4.10.002
Hera110
One need to flash russian ROM
Made HARD SPL yang 4.70 everythinw went ok
Tried to flash official rus rom. MODEL ID invalid
Deleted spl.nbh from the directory--the same
Then tried to flash via card HERALD.ASerg.Micro4.WM61R.WWE.SD.LZX.03.12.90
But nothing happens.
I made goldcard with qmat, security=0,
Copy 2 files hearimg.nbh and heradiag.nbh
but entering bootloader, nothing happens, just as usual bootloader

You've posted the same thing TWICE. Please refrain from doing so. This could result in a day ban if it were up to some.
There is no reason to post twice.
You can't flash the official RUU when your hardSPL unless you use USPL and it will erase the HardSPL. (or using the goldcard.)
If nothing happens when you go into the bootloader, your SD card is not formatted properly or is too slow.
There are many threads on this.

Related

Bricked Kaiser?

Hi Guys,
Got my new V1615 from Vodaphone yesterday. I tried to flash the HTC shipped firmware, started SSPL-KAIS.exe once I realised it wouldn't flash without it. The flash failed at 17% and once it rebooted it going back into bootloader mode and wont let me flash any other firmware, stops at 1% and says "you cannot install this firmware on this device".
Download the original V1615 firmware that someone extracted but that just sits at 0% without flashing.
Any ideas where I can go next?
The-Kevster said:
Hi Guys,
Got my new V1615 from Vodaphone yesterday. I tried to flash the HTC shipped firmware, started SSPL-KAIS.exe once I realised it wouldn't flash without it. The flash failed at 17% and once it rebooted it going back into bootloader mode and wont let me flash any other firmware, stops at 1% and says "you cannot install this firmware on this device".
Download the original V1615 firmware that someone extracted but that just sits at 0% without flashing.
Any ideas where I can go next?
Click to expand...
Click to collapse
So you hardspl first then tried flashing or you forgot to read and do your research first.
No, I didn't HardSPL first. There are SO many people giving advice here it's hard to get the facts.
I've use mtty to get it to boot! WooHoo
So now I want to flash to the original 1.81 firmware. Do I need to HardSPL first or just load SSPL-KAIS and try again?
I'd really appreciate your advice on this!
OK, I ran Hard-SPL and it flashed correctly.
Thanks for the short but good advice!

can you hard-spl a phone using an sd card?

would this be possible? it would be just like flashing a rom.
It depends...
For an install then, yes, it should be possible, what you would need to do is get a copy or your orginal shipped ROM, take out the OEM SPL and add the the Hard SPL to the image and flash that image via your SD card.
For an upgrade it is also possible, but requires a SSPL image to be created that is loaded to the SD card that boot's an SSPL and then flashes the Hard SPL from an Image. It has been done for the Kaiser, but it isn't easy work.
Neither of these are that easy, and I am not guaranteeing they would work :0
Ta
Dave

Flashing Issues

Hey
Need some help here, i have put the vox USPL on my 710, flashed a rom which has a timebomb in it. So i have tried to flash 4 differnet roms to it but they all do the same thing. It goes to bootloader starts to flash hits 3% then reboots saying the rom is corrupt.
The ROM currently installed is Snap v1.2
Thanks for you help in advance.
Lordao
I just sorted it you have to flash your Phone with USPL 1.16.
1. Follow the instructions on : http://forum.xda-developers.com/showthread.php?t=409721 to flash your phone with USPL 1.35 CID Bypass
2. While the phone is in the mode started from the above instructions, download Vox-USPL-RUU.zip from http://forum.xda-developers.com/showthread.php?t=330909 and flash the USPL
3. Flash any rom as normal, thats how i got it to work.
Followed the instructions, gets to 100% then reboots and says it is corrupted. Now i cant use the phone becuase of the time bomb, i have to keep doing a factory reset which is a real pain cause if i sync i get the thanks for using this beta and the phhne is un uasable. Not sure why it wont update.
Lordao
I think the issue lies with SDA application unlock not working correctly

Trying to start nandroid and get following message FAILED (remote: not allowFAILED

Trying to start nandroid and get following message FAILED (remote: not allowFAILED
Anyone know why I am getting this message?
I have the htc Magic from rogers with the latest rogers update
you dont have the right SPL. when SPL is wrong, you cant restore a nandroid backup. Make sure you have root, then follow the instructions in my post. If your not sure what all this is read sticky for noobs on page one.
http://forum.xda-developers.com/showpost.php?p=4814865&postcount=227
does changing your spl void warranty? Is there anyway to restore the spl you are going to replace?
I was thinking you can get back the spl that came with the upgraded version if you remove you custom rom replace it with you stock rogers rom and then run the upgraded wizard to upgraded your firmware and force the upgraded even though it says you have the latest upgraded. Wouldn't that role you spl back fro warranty purposes?
when you want it back you can just flash the rogers update and it will restore the original rom and spl ;-). Ive done it. and ill be doing it on monday when i get my replacement magic. lol. your safe.
hey have a couple questions
If I install Amon's recovery, when I flash it with the rogers update it even rolls the recovery image to the stock image?
how did you manage to install Amon Ra Magic Recovery without using flashboot
Follow this; http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/. You have 32a board so follow instructions for that. It's very simple. Watch the video before you start and then do it with the video. Can't really say much more.
Now when I go to apply update.zi
finding update package
opeing update package
e:can't open /sdcard/update.zip
no such file or directory
SD Cards Issues
I've had this happen with the SD card with update.zip on it. I remove the SD card for a moment and then re-insert it and try again. Not sure why it happens but this seems to always allow me to install the update.zip on my SD card.
tired that still same problem
any other suggestions ?
fixed just download the sdl from
http://forum.xda-developers.com/showthread.php?t=529019

Cant overwrite ROM

Hello Guys.
About a lot of months i flashed TPCs Stocklike Rom to my device. Now i thought it might is time for an update.
But i got a huge problem :
When Flashing an other rom the device comes to bootloader and starts transfer/unpacking/whatever up to 100%.
After that my old TPC Rom reboots again.
What can i do?
Very much thanks for help
Copy the new rom that you want to flash onto the root of your sd-card and rename it to kaisimg.nbh. Reboot your phone into the bootloader and re-flash. That should do it.
Try flashing back to your stock rom first.
I already tried flashing the stock... that did not work for me.
Blinkydamo i flashed using the SD Card. The Screenshows update success.
Then i do a softreset an the old TPC rom boots again.
I already tried flashing the stock... that did not work for me.
Blinkydamo i flashed using the SD Card. The Screenshows update success.
Then i do a softreset an the old TPC rom boots again.
Any other ideas how to solve my problem ?
Put your phone into bootloader screen and see what it says for hardspl, maybe you just need to upgrade your hardspl.
3.29 - Flashing a new HardSPL doesnt work too
Most ROMS don't have new boot screens, some of the Chefs cook them in but others don't, are you sure it isn't just the old boot screen you're seeing, if the ROM flash has reached 100 % the Flash must have worked ?
StewD said:
Most ROMS don't have new boot screens, some of the Chefs cook them in but others don't, are you sure it isn't just the old boot screen you're seeing, if the ROM flash has reached 100 % the Flash must have worked ?
Click to expand...
Click to collapse
however,he says that he has flashed stock rom. stock rom changes splash with "smart mobility" black splash
Well is my phone unfixable ?
have you checked spl version in bootloader as denko7 said?
same problem
I am having the same problem.
MTTY says that BLOCK 1639 (0x667) is a bad block. Everytime I flash something (a new rom, stock rom, spl), it goes to 100% but it doesnt change anything as if i havent flashed. I am using TPC 11 rom, somtime it says that storage memory is full, and then when i do reset, everything is gone as if I did a master reset.
I am using TPC 11 rom
What SPL and Radio you have!?!?!
For me its spl 3.34 and radio 1.65.
i have HARD-SPL 3.29. Radio is 1.71.09.01
try to leave Sd card and flash with cable.
af974 said:
try to leave Sd card and flash with cable.
Click to expand...
Click to collapse
If you still have an old rom on your SD and put a new rom on there and try to flash, the phone will flash the first available file. If flashing using SD card , make sure that you have deleted all other rom image files first.
I was trying this how to :
http://forum.xda-developers.com/showthread.php?t=371154
but the commands listed are not working for my MDA Vario III (T-Mobile Brand).
For me task 8 = Reboot
I found out, that task 28 = Format
I got following output :
Code:
Cmd>task 28
Format start
Storage start sector=0x84C0, total sector=0x125C0
Storage start block=552, total block=1175
Total Bad Block in CE: 3
Erase physical block from 845 to 1999
si backup: Erase physical block from 2032 to 2048
But even after that im not able to flash a new rom.
Was that the right format?

Categories

Resources