Database Info

Wizard and Prophet GSM roms are interchangable

Wizard and Prophet GSM roms are interchangable!!!!!!!!!
Try at your own risk.
My prophet is running wizard's GSM 02.47.11!!!!!!!!
Full signal strength!!!!

I've tried this as well but it said: ERROR [300] : Invalid Update Tool...
Did you use the NDFTool to change the header of the Radio ROM?
I've changed it from WIZARD to PROPHET. Maybe it doesn't work because I've got an G4 Prophet

mccune said:
I've tried this as well but it said: ERROR [300] : Invalid Update Tool...
Did you use the NDFTool to change the header of the Radio ROM?
I've changed it from WIZARD to PROPHET. Maybe it doesn't work because I've got an G4 Prophet
Click to expand...
Click to collapse
I got a g4 prophet as well.
I tried many things and maaany romupdateutilities.exe and the one that worked was:
http://forum.xda-developers.com/showthread.php?t=271043
but whithout changing the nbf header!!!!
Just go to the ftp, download a wizard radio rom, and use the ruu utility from the above link

Great! It works
Will have to see if this radio works better than the old one.
I've just replaced the (radio ROM) NDF file with the one from the link you provided.
TnX again!

Can someone please cook several wizard radio roms for prophet...like maybe the cingular 2.25.11 Rom and upload it?
Thanks

problem with with 5._Underground_edition_Crossbow_ROM.exe

hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.

u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition

but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.

You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).

thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.

Ipl/spl 3.08.. how?

Can we use the IPL/SPL 3.08 for our non-german ROM?
besides the only german in that ROM is the OS i dont think that the IPL/SPL are also german..
Anyone tried? or any experts knows if its possible?

if installed aku 3.3 from tmobile...with IPL/SPL 3.08 works gr8!

as far as i know its possible..
besides, if you install the whole german AKU 3.3 ROM youll have the APL/SPL 3.09 then try to flash your fav Crossbow ROM.
You know have a WM6 + The New Radio + The new SPL/IPL,,
just a thought.. havent tried it my self..

where did you find that ipl/spl ? I would be willing to test this to see if anything german remains... ( live in germany, using custom non-german wm6roms)
any link/info to where i can get that ipl/spl would be highly appreciated.
thanks

Here's the download instruction...
http://forum.xda-developers.com/showthread.php?goto=newpost&t=300628
-004

double_ofour said:
Here
http://forum.xda-developers.com/showthread.php?goto=newpost&t=300628
Are you also trying to flash WM6 with that latest IPL/SPL? if so then please post a feedback..
Click to expand...
Click to collapse
I did, twice already and works. I created an updater with the Radio and IPL/SPL + the Xplorer splash. File's called xpl and is on my folder.

Can you post the IPL/SPL here please..
i tried to extract it but i think its corrupted..
it gives me an ipl of 2kb and spl of 700+kb..
is that right?

Multiple IPL/SPL files?
I have never cooked a ROM with the IPL/SPL or the GSM Radio included and in readiness of Faria's updated Real Thing I thought I would download the German AKU 3.3 and extract the IPL/SPL from it. However there are 4 files:
90000000-IPL_1.nb 2KB
90000000-IPL_2.nb 2KB
91000000-SPL_1.nb 768KB
91000000-SPL_2.nb 768KB
I am attempting to cook them with the 'nb2nbf_wizard.exe' but don't know which ones to use (they are exactly the same size however?).
Can I just create a ROM that has only the IPL/SPL & GSM and no OS?
Andy

ADB100 said:
Can I just create a ROM that has only the IPL/SPL & GSM and no OS?
Click to expand...
Click to collapse
Yes you can..
Just choose one for IPL and SPL..
those are just the same, either or you choose the 1 or the 2..

for the easier way just download here
http://forum.xda-developers.com/showthread.php?p=1199755#post1199755
-004

all says 3.09 buts 3.08!!

Problem with flashing rom

Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan

ashtrays said:
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
Click to expand...
Click to collapse
i would flash back down to the button rom to get your ipl/spl back to 1.01, then try the Xda_MiniS_LaunchROM_v154102 that is listed in the guide if you havent already. were there any errors when you were doing the CID unlocking?
download the wizard service tool if you dont have it (Wizard Upgrading forum) and see what the CID Actions button says when you choose read CID block.

okey, thank you so very much i will try that now and i come back with an answer how it work later there were no errors due the CDI unlocking haha my english is very bad
Edit: now i have installed the Xda_MiniS_LaunchROM_v154102 but i get stuck every time in the customization "installed signed_discobutton8.sa" i get stuck there, does it matter? Can i restart my PDA and it works as i schould do?
Sincerly yours// Johan

Now i have installed wizard service tool v4.2.1.. and it says that is CID unlocked and SIM unlocked. What do i do now to install wm6 touchflo with cube. I have download this rom: Artemis Touch 3.01 full. How should i do now?
Best regards// Johan
Edit: do i have to install windows mobile 6 so i can install a touchflo and cube rom?
best regards // Johan

2.03 TX WWE to Win Mobile 6.1

I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53

I have the same Problem. But it's not just that I can't upgrade to 6.1... I can't do anything. I tried to get different Roms on my Magician. The original Rom too...but nothing works. All that since I tried the 2.03TX Rom... The 2.03TX is working nice at the moment but I would prefer the original one or WM6.1 Please help!!!

I had no problem switching between tx and 6.1 - both directions.
The only thing I had to be aware of is the radio version. 2.03tx doesn't install it's own radio and last cotulla rom requires radio 1.12.

my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.

phamhien said:
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
Click to expand...
Click to collapse
Check following 3 points:
1. Make sure your device is a "Magician"
2. Make sure the downloaded ROM is one of Cotullas WM6.1 (O1 , O2 or O3)
3. Befor flashing make sure the Radio on the Magician is version 1.12

Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?

Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.

targets said:
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
Click to expand...
Click to collapse
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)

kamillo-s said:
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
Click to expand...
Click to collapse
Maybe you have a problem with your PC, maybe you are doing wrong, or maybe your Magician is corrupted.
I don't know much about the bootloader, guess it is on his own chip and not changeable at this time, otherwhise it could be a part of the rom but i have never seen a Magician bootloader-file for itselfs.

hubie53 said:
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Click to expand...
Click to collapse
try to change the usb port to another....
or make sure u have the newest activesync...

Thanks for your help! i 've upgrade succesed for my magican!

I try update on other magican, and was succesfuly. I think I cant update rom after instaling 2.03 tx that something was broken or its something wrong witch magicans software. I have this same model of magican ,and other rom, and I can flash it.

same same here
i had the same problem with my magician i think it happens with some devices not all of them i couldn't find any way yet to solve it.

WM 6.1 for Magician-a fake?
Managed to flash my device with Windows XP. Works fine, thanks to all helpers!!!

dead.....!!!!
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!

learnig said:
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
Click to expand...
Click to collapse
thx the problem was solved.thx

hubie53 said:
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
Click to expand...
Click to collapse
i Have flash my jam with 2.03 TX WWE and then downgrade to original i mat jam
after a month i flashed it again and can't downgrade or upgrade or do anything for 1 1/2 year
i tray many things like sd flash and many roms but it didn't work
may be Mr.Cotulla have a solution for it or any one have it share it to us
the only thing we can made is to inter the boot loader mode
Thanks