is there any way to use the phone as a side monitor for my PC?
I'd like to keep my IMs on it and respond using the phone's keyboard, or also control my music via touch screen
At the moment, no. However, it may not be out of reach. Give it time and somebody may try making it possible.
Still, all of the things you want to do can be done, just not the way you want to do them. There are IM clients for the phone. As for controlling your music, I've seen a few apps that can do so remotely.
Related
In short: Is it possible to cluster, network or push device output from one device to another, share storage devices and network/gps interfaces?
The long version: I have been wanting to build an in-car device that would store media and act as a gps and what not, but haven't found a way that I want to implement it yet. I was thinking if I found a x86 port of android, got most of the voice stuff working, I could have a headless device that I could store music on and use as navigation. I know the phones are capable of that, but if I want to keep say 500 gb of music on me, how does one do that?
My thoughts were if it were possible to either cluster or network an installed android powered unit to an android powered phone, I could always have network access from the unit in the car and share the gps from the phone, or have the phone access the storage from the device (not through dlna, but the music app seeing it as physical storage) and allow me to push the output from the in car device to the phone and let me interact with the system how ever I need to I could accomplish a form of in-car entertainment.
I figured that there could be apps written that would let the in-car device act as a headless unit, with its only interface being audio, it could store navigation directions/maps and what not, so if I didn't have the phone that day, I could still navigate to where I needed to. The phone and the device could constantly be in communication with each other if the car was parked by a wifi hotspot or something, so if I chose to navigate somewhere when I was at home, the car would already have the directions. I could also have it pull any media changes through wifi, and always have an updated media library.
I know the phones are fully capable of doing this, but for most of it, you have to have a window holster for the car to use the gps, and wires running for audio and charging and what not, but if there were a way that the in-car device could be hardwired to the audio system and left alone, the phone could stay in my pocked, be linked via bluetooth and I could have a small button-pad or something that would allow me to initiate google voice search, control the media player and interact with navigation. The whole thing with linking the phone and device together would be so the mobile network could be shared between android devices and the incar device could pull the information it needed. The thought of the display sharing was in case I needed to interact with the incar device.
I know what I am going on about is specific to me, but my thoughts behind it were if it were possible to do at least the network sharing (with out tethering or mobile hot spot blah blah blah) that android phone and tablet owners could do the same thing. They could share their mobile network through their tablet and have a tablet that would be always connected, would share mailboxes with the phone and basically act the way the Blackberry playbook is proposed or how the Palm Foleo was supposed to work. If the devices had a network ability of some level, the tablet could pull text messages, email messages, contacts or any other sync-able item.. That way, this wouldn't just be done for my benefit, but it would take tablet and phone owners to another league. Two devices that share the same information from one source and don't have to sync with the same servers twice. It would take a lot of redundancy out.
I hope you guys can see usefulness in my idea, and can shed some light for me.
Sorry from bringing this back from the dead, but since I never got any responses I'll add a bit more..
Does android have anything that would work like blackberry bridge between two android devices?
Droid Vnc server and androidvnc works fine for screen sharing. What I really like is the hpc aspects to CPU cycle sharing over wifi/nfc. Really interesting possibilities.
What I am looking for is to have the ability to use two separate android devices, but have them communicate via wifi/bluetooth or what ever and act as the same device in the sense that when the device with the data plan gets a text message or phone call, the notification goes through the other device that would be physically docked to audio equipment or what ever...
I have a Droid X, Droid Incredible, Droid Pro and a first gen Droid laying around.. Currently the Droid Pro is my in use phone.. The rest are just laying here. I want to be able to dock one of the others in my car, turn the GPS on, link it to my droid pro and have the other phone use the droid pro's active data connection for guidance/searches etc, and it would be docked to car audio, so it would need to access the pro's sd card, and have access to the pro's phone audio, or the ability to route calls from the pro to the other device via bluetooth or whatever, not by call forwarding.. This way it would be a sort of infotainment/telematics system..
Think of the possibilities this would open up for android tablets etc. If You could reply to text messages from your tablet because the tablet is linked/bridged to the phone in your pocket... That would make these tablet/laptop combos more appealing because it would the perfect convergence between tablet and phone.
Oh, and I guess, the other thing is that I have multiple cars, so one device would go in each car, and then when I got in the car, the one in that car would link with my phone, and everything would be the same, car to car, or device to device...
I guess another way to bump this:
Would it be possible for an app to do ADB to ADB via bluetooth or something, because then an app could be written like pdanet that would allow the network to be shared at least?
I dont remember the name of the app I think the name of it is Dashboard? and it will store/push all texts/emails etc. to every device u have dashboard installed on...Best buy has an app kinda like that too...Like the Idea of the screen sharing is that kinda like remote desktop/control?
I just search how to neywork cluster android came across your post ..... if you use the Google apps like Google play music/maps as well Google hangouts since with Google voice you can easily do what you want with out the need for both devices being together you can upload 50000 songs 9n play music for free and any device with ur hangouts and voice will receive ur calls and email notifications .....just need to make sure have Internet
Looking for a backwards remote access app (instead of control of pc from phone, I'd like phone control from PC).
I'd like to find a more discrete way to respond to texts without having to pull my phone out while at work. Preferrably something that doesn't require USB cable, WIFI or BT. Have found several, but most require Wifi or Cable..
Did some searching and found quite a few solutions out there but wondering what else everyone uses if anything?
Thanks in advance.
TEXDRO is not bad but requires Wifi/BT..
Moderator/Admins: Can most likely delete this now, sounds like WebKey may do all I was looking to do.
Hello all, I've been wondering lately if it's possible for an Android phone to be plugged into an external touch screen and be completely controlled via the external touchscreen?
By possible, I actually mean easily done via some basic or maybe not so basic code.
I know some Android devices offer mirroring via mini hdmi, but you usually have to either control using a remote or the phone. I'd rather have it connect through the micro-usb port, lay the phone somewhere else, and fully control the phone through the external touch screen.
I tried to search, but wasn't sure what to use for the search and all I found was ways to remotely control you pc using your device.
no i dont think so....a web application is there for controlling your phone via wifi with the help of router..
Airdroid try it..
shyamjptpm said:
no i dont think so....a web application is there for controlling your phone via wifi with the help of router..
Airdroid try it..
Click to expand...
Click to collapse
Thanks for the reply. I'll give Airdroid a try, but I was looking for a more direct option. I'm thinking there has to be a way since the webtops/laptop docks seem to work well, but again those use mouses/keyboards for control.
I am hot on this idea too
I have a lilliput 4 wire resistive screen that i want to use a carputer.
I have seen one solution that is stuck in "coming soon" that requires some manual intervention called customgadz...google it. It's expensive.
I have googled endlessly to try and find a way to input the Liliput directly into the Atrix HD dock as a USB input but the touch screen needs to be calibrated.
So i've resorted to emailing liliput to see what they say.
Hi there,
there are tools out there to lock your Windows when bluetooth connection to a device is lost and unlock when its established again.
That would be a nice feature for the Smartwatch (better than mobilephone) because its always with me.
I cant connect the watch via Bluetooth to the pc.
Any ideas how to do this.
Maybe we have a good app-developer here
Thanks alot!!
Daniel
I am quite lost with your approach.
Anyways, if you are looking for a tool that keeps your phone unlocked when it is connected to the watch. Try PhoneLocator
Sent via Phone.
I think he wants to lock a PC with windows...
you can't do this because it doesn't exist an app to conect both etc...
sowed said:
I think he wants to lock a PC with windows...
you can't do this because it doesn't exist an app to conect both etc...
Click to expand...
Click to collapse
Yes thats what i mean. If the bluetooth connecton to the pc is lost (out of reach) it locks itself. Back to the pc it unlocks. There are tools for windows you can realize that with a mobile phone. But i often leave it at the desk. The watch is always with me.
The problem is i cant connect the watch to the pc.
Sorry if the first post was misleading.
Is there any possibility to get the watch connected to a pc. More is not needed to realize this.
Thx.
painkillerde said:
Yes thats what i mean. If the bluetooth connecton to the pc is lost (out of reach) it locks itself. Back to the pc it unlocks. There are tools for windows you can realize that with a mobile phone. But i often leave it at the desk. The watch is always with me.
The problem is i cant connect the watch to the pc.
Sorry if the first post was misleading.
Is there any possibility to get the watch connected to a pc. More is not needed to realize this.
Thx.
Click to expand...
Click to collapse
If you can't connect the watch to the PC, how a tool (if there is one) will know that the watch is connected and perform an action. Logically and programmatically, is impossible.
Secondly, why such watch should be connectable to a PC? it wasn't made for this purpose.
iT iS Me said:
If you can't connect the watch to the PC, how a tool (if there is one) will know that the watch is connected and perform an action. Logically and programmatically, is impossible.
Secondly, why such watch should be connectable to a PC? it wasn't made for this purpose.
Click to expand...
Click to collapse
I see what you mean. But isnt xda a developer Forum too? Maybe MAYBE its possible to make an app that could make the watch connectable to a PC via bluetooth or the watch os itself.
Its just an idea - im not a developer and i dont know about what is possible and what is not. But its an android running on the watch and we are in a developer forum so why not!!
I would like this feature...
Technically it should be possible but it may not be worth the effort. I think the Windows program would have to try to connect every minute or every 30 seconds and lock the screen if it cannot. Then keep scanning to unlock when it can connect.
That would be so cool! If only the watch worked with a computer.
Sent from my Galaxy Note 10.1 (N8000).
badplanet said:
Technically it should be possible but it may not be worth the effort. I think the Windows program would have to try to connect every minute or every 30 seconds and lock the screen if it cannot. Then keep scanning to unlock when it can connect.
Click to expand...
Click to collapse
The software is ready to go - the problem is to connect the watch. Sadly...
http://www.howtogeek.com/67556/how-to-unlock-your-pc-by-being-nearby-with-a-bluetooth-phone/
badplanet said:
Technically it should be possible but it may not be worth the effort. I think the Windows program would have to try to connect every minute or every 30 seconds and lock the screen if it cannot. Then keep scanning to unlock when it can connect.
Click to expand...
Click to collapse
There is a Windows tool 'BtProx', which can lock the PC when the bluetooth device is disconnected. I used this with hands free headset.
However, as mentioned earlier if Windows cannot see the watch, how the application will act??!
BtProx
http://btprox.sourceforge.net/
Sent via Phone.
painkillerde said:
The software is ready to go - the problem is to connect the watch. Sadly...
http://www.howtogeek.com/67556/how-to-unlock-your-pc-by-being-nearby-with-a-bluetooth-phone/
Click to expand...
Click to collapse
I love this idea, totally useful. Isn't the problem really on the watch side though? It will only pair with one device at a time (the phone) and then is no longer visible. On the PC side just being able to see the watch would trigger the unlock, no need to actually pair. I am probably missing something as I am not a developer.
Fred
ffarber said:
I love this idea, totally useful. Isn't the problem really on the watch side though? It will only pair with one device at a time (the phone) and then is no longer visible. On the PC side just being able to see the watch would trigger the unlock, no need to actually pair. I am probably missing something as I am not a developer.
Fred
Click to expand...
Click to collapse
Yes I also think something like a ping would be enough - but it seems the Lock/Unlock Software wants a paired device and the watch isn´t visible after pairing with the phone.
So it seems we have no option to get it work.
painkillerde said:
Yes I also think something like a ping would be enough - but it seems the Lock/Unlock Software wants a paired device and the watch isn´t visible after pairing with the phone.
So it seems we have no option to get it work.
Click to expand...
Click to collapse
Don't give up so fast. I think there might be a way...
How about if the unlock software would unlock the PC when the phone was connected but only if the watch was connected to the phone? That would probably take a small amount of coding on the Android side to inform the PC whether the watch were connected or not. This way both the phone and watch would have to be connected to their respective pairings. I think it still solves your problem of walking away from your desk and the phone which would lock the PC and when you brought the watch back the PC would unlock.
Do you think the PC lock software folks would be interested in such a scheme? Have you been in contact with them? This would work for all types of smartwatches with only coding done on the phone and PC.
Cheers,
Fred
Yeeeeehaaaaa
ffarber said:
Don't give up so fast. I think there might be a way...
How about if the unlock software would unlock the PC when the phone was connected but only if the watch was connected to the phone? That would probably take a small amount of coding on the Android side to inform the PC whether the watch were connected or not. This way both the phone and watch would have to be connected to their respective pairings. I think it still solves your problem of walking away from your desk and the phone which would lock the PC and when you brought the watch back the PC would unlock.
Do you think the PC lock software folks would be interested in such a scheme? Have you been in contact with them? This would work for all types of smartwatches with only coding done on the phone and PC.
Cheers,
Fred
Click to expand...
Click to collapse
GOT IT
I give me the needed idea.
You need
Tasker + Secure Settings + your Mobile.
Mobile is connected via bluetooth to PC. Software locks on connection lost to mobile.
Now i made a task which disconnects the bluetooth connection to PC when connection to the watch is lost. -> PC locked
You may also use the notification message of the Smartwatch - try it later.
An other task reconnects the mobile to PC when watch reconnects to mobile. -> PC unlocks but it takes a little time (but for me the lock was the important thing).
If you take away your mobile it also locks the PC. What more do you want!!!!
I would say - Mission accomplished...good:
Now its time to play arround with tasker a little bit more :fingers-crossed:
Damn it was tricking me. the Phone reconnects after a few seconds so the lock timer has to be extrem short ... working on it
Any ideas how to prevent autoconnect to the Computer but stay paired?
painkillerde said:
Damn it was tricking me. the Phone reconnects after a few seconds so the lock timer has to be extrem short ... working on it
Any ideas how to prevent autoconnect to the Computer but stay paired?
Click to expand...
Click to collapse
I am not sure what you mean. When does the phone reconnect when you don;t want it to? Seems like your idea should work. I am not a tasker user but are there any timer tasks built into it that would stop the unintended activity for a period of time?
Fred
ffarber said:
I am not sure what you mean. When does the phone reconnect when you don;t want it to? Seems like your idea should work. I am not a tasker user but are there any timer tasks built into it that would stop the unintended activity for a period of time?
Fred
Click to expand...
Click to collapse
When the watch disconnects it triggers the disconnect (via tasker) between mobile and computer but the mobile connects again after a few seconds. So btprox or btproximity (software im using to lock the pc when bluetooth disconnects) has not enough time to lock. I have to set the interval btprox looks for the connection to under 10 sec. Thats to short and i think it will give bigger battery drain on the mobile.
So i need a way preventing the mobile from reconnecting again to the pc unless the watch is reconnected. but this seems harder than i thought.
Played a lot arround with tasker - even tried t find a way to send a cmd to the pc and lock it over command line when watch is out of reach from mobile. so i could use this way if watch is away from pc and the "bluetooth out of reach" way when mobile is away. but i didnt found an app to use with tasker which is able to do so.
But after getting so far i wont give up
painkillerde said:
When the watch disconnects it triggers the disconnect (via tasker) between mobile and computer but the mobile connects again after a few seconds. So btprox or btproximity (software im using to lock the pc when bluetooth disconnects) has not enough time to lock. I have to set the interval btprox looks for the connection to under 10 sec. Thats to short and i think it will give bigger battery drain on the mobile.
So i need a way preventing the mobile from reconnecting again to the pc unless the watch is reconnected. but this seems harder than i thought.
Played a lot arround with tasker - even tried t find a way to send a cmd to the pc and lock it over command line when watch is out of reach from mobile. so i could use this way if watch is away from pc and the "bluetooth out of reach" way when mobile is away. but i didnt found an app to use with tasker which is able to do so.
But after getting so far i wont give up
Click to expand...
Click to collapse
Well, I am not a tasker user but I do use an old app I started using years ago named Settings Profile (I have no idea if you can still download it). SP has variable time delays between actions so you could turn off bluetooth on the phone for a minute (or as long as you think you need to wait) after the watch disconnected and then turn bluetooth back on so that the phone would reconnect to the PC while you were gone and then when you got back the watch would reconnect to the phone and all would be good. Tasker seems like it has way more capability than my old app (that I am too lazy to change). I am sure buried somewhere in Tasker is a delay you could use like that.
Let me know if you get it to work and maybe I will make the leap, though I am sure I have better things to do with my time than get lost in Tasker
Fred
ffarber said:
Well, I am not a tasker user but I do use an old app I started using years ago named Settings Profile (I have no idea if you can still download it). SP has variable time delays between actions so you could turn off bluetooth on the phone for a minute (or as long as you think you need to wait) after the watch disconnected and then turn bluetooth back on so that the phone would reconnect to the PC while you were gone and then when you got back the watch would reconnect to the phone and all would be good. Tasker seems like it has way more capability than my old app (that I am too lazy to change). I am sure buried somewhere in Tasker is a delay you could use like that.
Let me know if you get it to work and maybe I will make the leap, though I am sure I have better things to do with my time than get lost in Tasker
Fred
Click to expand...
Click to collapse
Disable bluetooth would work but i dont like this option - i did it an other way.
I got it Working now with "Remote Launcher"+"Tasker".
Made a task locking the PC via Remote Launcher if watch disconnects from Mobile after 30 seconds.
If Mobile disconnects bt from PC the btprox software locks the PC.
Not exactly what i want but works...
Unlocking seems to be not possible...
ffarber said:
I love this idea, totally useful. Isn't the problem really on the watch side though? It will only pair with one device at a time (the phone) and then is no longer visible. On the PC side just being able to see the watch would trigger the unlock, no need to actually pair. I am probably missing something as I am not a developer.
Fred
Click to expand...
Click to collapse
While this is an old thread here a small hint:
There is a Win Software "BTProximity" that will lock / unlock the PC when discovering a BT device with a given BT address - without the need for actually ever pairing the bt device with the PC.
This approach should work just fine with every BT enabled smartwatch. Unfortunately I am not yet allowed to post links here. Google for "guidingtech auto lock win 8 bluetooth" ... the first result will link you to the tool.
Comments appreciated.
So my new S7 's screen is completely dead. I can see the soft buttons light up and I've been trying to swipe but I can't. I was going to try to screen mirror to my Fire TV (by looking at a vid and hopefully hitting the right places to get it to connect) but the screen isn't passing any input.
So my next thought was to get a USB OTG cable and a mouse, although I have no idea how fast the pointer will move making guess the steps to connect really hard. I was also looking at chrome extension Vysor, but again, it need debugging enabled (which isn't) on the phone for it to work. Apparently sammy discontinued MHL support so there's no way to just plug in to in a TV with a cable,
Does anyone have any suggestions on how I can force access on the phone to get a backup? Again, I need something that will let me see the screen, preferably in as little steps as possible (the more menus I have to navigate, the less likely I'll be able to blindly fumble my way through)
Thanks!
Anyone?````
same situation here, not much resources out there. Is your phone still connected to your wifi? mine is not so I can't get google play to install apps to it.
If you can though...
Samsung SideSync was recommended on another forum, similar to vysor but might work wirelessly for you
Good luck, and please let me know if you find a solution. I might by vysor to try wireless (they haven't answered me whether or not wireless version by passes the need for usb debugging)
phatphat said:
So my new S7 's screen is completely dead. I can see the soft buttons light up and I've been trying to swipe but I can't. I was going to try to screen mirror to my Fire TV (by looking at a vid and hopefully hitting the right places to get it to connect) but the screen isn't passing any input.
So my next thought was to get a USB OTG cable and a mouse, although I have no idea how fast the pointer will move making guess the steps to connect really hard. I was also looking at chrome extension Vysor, but again, it need debugging enabled (which isn't) on the phone for it to work. Apparently sammy discontinued MHL support so there's no way to just plug in to in a TV with a cable,
Does anyone have any suggestions on how I can force access on the phone to get a backup? Again, I need something that will let me see the screen, preferably in as little steps as possible (the more menus I have to navigate, the less likely I'll be able to blindly fumble my way through)
Thanks!
Click to expand...
Click to collapse
If it's turning on (except by the screen) you can use Smart Switch or Kies to recover your data.
http://www.samsung.com/us/smart-switch/
http://www.samsung.com/us/support/owners/app/kies
OR You can use FIND MY MOBILE if you registered a Samsung account to unlock remotely and use USB.
https://findmymobile.samsung.com