Related
Hi Guys,
I find the volume is too soft when the phone is switched to a speaker mode. Anyone knows how to change it ? the System and Ring volume bar is already at max.
I used to owe an Omnia...but sold it off because i hate the touch keypad.
Omnia has this code *#0002*28346# that can change all the speaker, earpieces and ring tones.
Does TP has similar code ?
Look for solutions...thanks
Feihong
I think there is no resolution for low speaker/headphone voice level yet...
yeah no solution as yet...
The sound volume is also a bit lower,that I am using normally(another HTC devices descibed below). I was all the time very happy with HTC's loudness,but Raphael is really too silent. Only one solution now I see,turn on speakerphone mode and turn the device around.with the display outside. So you can call also in discobar.
Sad..Sad...
Feihong
yes guys it would be realy great if some one would find it out how to increase the sound from the TP i ghat mine today its a greath ppc but the sound its not so good its realy wery poor :S one mine htc tytn 2 its perfect
pls guys help uss by that problem
Guys there is a way to edit the registry on a touch pro to make the volume louder, I had it on my old touch pro, but I just had to get a new one from the insurance company. As soon as I find it I will post it here
I just got my Fuze a couple of days ago, and noticed how much lower than my tilt the speaker volume was. I was ok with it, but is nice to hear someone has a reg hack for bringing the volume up on it. I'll be waiting for this post!
HKLM/Control Panel/Volume AND HKLM/Drivers/Speaker both potentially affect volume
or try this cab, it should work, havent tested it tho
On GSM devices, there is a set of AudioPara*.csv files which are normally found in the kitchen OEMDrivers folder - the contents end up in the .\Windows folder as hidden files). Use the device File Explorer (show hidden/system files) to confirm that AudioPara*.csv files exist on your CDMA device.
1) If they do exist, search the XDA forum using these keywords:
Arup Audio Boost CAB
2) If they do not exist, a CDMA chef may be able to offer some insights on how volume levels are handled for CMDA devices ... afaik, should be the same.
Using a registry editor, search for the .CSV file(s), it will yield the registry key that may need to be changed if you wish to point to a different .CSV filename in case you wish to return to the default file without resetting your device. In all cases, be cautious, tweaking the AudioPara to extreme ranges can damage the device or your hearing.
HTH,
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
The problem is that there is not enough power available from the audio amplifier. This can't be corrected with software.
What this .cab does is probably that it tries to increase the amplification beoynd the capabilities of the device. This may make the sound seem louder, but as you have noticed, it also increases distortion. There is no workaround for the laws of physics...
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
illi said:
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
Click to expand...
Click to collapse
Did you change the dll file in the registry so that if points at the right one? Its been written a couple of times the the SRSWOW cab going about set the wrong values in the reg. So I think this should be an easy fix if you do a bit of searching. Try the Daimond forums.
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
@WizP: I'll do a search for the fix.
@Taajuus: The sound must be decent enough....
Taajuus said:
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
Click to expand...
Click to collapse
I have my volume set to the halfway mark. I'm talking about the conversation volume, only settable while in a call, not the system or ringer volumes.
Those that are reporting low volume, is it the ringer, system, or call volume you are complaining about? In other words, is it the front or the rear speaker that's producing low volume?
The ring volume is more than fine, it's just the speaker volume when in a call, when outsuide you can hardly hear it
Yes, I concur.
I've got my in call volume at maximum and you can still barely hear the other person.
Before you ask, I don't have a screen protector covering the earpiece.
I still wonder - I havent had any problems with incall voice. Can hear person very clearly even outside in traffic noise.
Could this really be single device problem, or maybe operator dependant?
With that audiopara file in my raphael (ROMeOS V.1.05) the speakerphone volume is now hugh,the music playback is loud, but a little disorted, but j think that there was no serious change in incoming ringtones (though j use only wav files-that are much louder from mp3's.
As far as the disortion a new modified audiopara file that suits well with Raphael should make the difference.
J will try some mods with SRSWOW..
Worked here... But the sound is VERY distorted..
Couldn't find a way around it with SRS (Tried treble reducer) and no luck.
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Mr.Sir said:
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Click to expand...
Click to collapse
REMOVE THAT. It's the same thing if I tried to yell to you with a wall in between us. Sound has difficulty traveling through a medium, specially a piece of plastic.
Dear Taajuus,
Could this really be single device problem
Click to expand...
Click to collapse
Well... yes sit can because:
1. There are several related problems that are not seen in all devices.
2. Not all Raphaels [Touch Pro] are the same model, make or version.
or maybe operator dependant
Click to expand...
Click to collapse
It can never be related to the operator because:
1. The operator's interaction with the device is the one of a comm carrier.
2. It's only possible influence would be with/thorough the radio, never the ROM.
3. The operator cannot directly interact with the hardware.
Cheers.
xenkato said:
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
Click to expand...
Click to collapse
how do you install this?
The sound is distored cause tripp modified the values of the gain but put it too high. If some one could put lower values it would be great. I tried but didn't manage . I also tried to put the values of the HTC NIKE but it resulted in a lower sound that the original one.
How to install audiopara (to 'ekerbuddyeker")
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
xenkato said:
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
Click to expand...
Click to collapse
Ah, so that's how you install it ololol better write this on the first post...
Well for me this file really fixed the sound of my device, specially the earspeaker!! Now I have to lower the system sound so I don't get deft
I recommend everyone to use it...
So do u actually mean that this cab file has increased the volume on a call or just the general sound???
Hello i got my PPC from 2 days. Its a copy of HTC 3G T3232 , but when im making a call i hear the other guy low. I meen the volume is low. And the other thing is that he can hear hes voice too but with some delay. I think this isnt normal and now i want to find if its from the phone. And are there any tips for increasing the volume of the call? I think there should be some regg tweak's for this, and for the other problem im not so sure. So can anybody give me a hint and a good regg editor or tell me how to edit them. After all im new to win mobile and this isnt like a standart windows run>regedit
Welcome to the forum
Do a search for an app called SRS Wow it increases the general volume
Good luck,
ADJUSTING/INCREASING RING VOLUME
1. Advanced - Registry Edits
a. Get out your favourite registry editor.
b. Navigate to HKCU\ControlPanel\SoundCategories\Ring
c. Change InitVol DWORD to 5 or higher. THIS ONLY INCREASES RINGTONE VOLUME
Alternatively if you want to increase the INCALL volume you just need to do the following:
b. Navigate to HKCU\ControlPanel\SoundCategories\InCall
c. Change InitVol DWORD to 5 or higher.
WARNING: Don't change anything you aren't sure about.. if you really want to change it then BACK IT UP FIRST! >_<
2. Use the SRSWOW Driver.
Install the SRSWOW_HD Driver for your PDA and increase sliders until you're content. (usually 3D and Focus increase the volume). BTW i attached the SRSWOW_HD Driver..
PS: I take no responsibility for any damage you do to your device.
PPS: If you have any further questions about this or the Atom Life.. PM me.
Cuz of SRS wow i have done a hard reset, cuz of the program my tuch screen wasnt working. Btw some1 know something about the echo, i meen when i talk with other ppl they can hear their voiceses too..
Hi guys... i have a big question:
our Omnia have two kind of audio: audio call, and system audio.
for incoming call, i have set the audio at 5 level
for the system audio, i have set at 1 level.
My problem is this, and i believe so for everybody:
when i receive a sms, the audio is much low! This because the sms tone its played with system audio, right?
So all the other tones like notify, tap on display, play a video..ecc
My question is, is there a way to play sms tone with the "audio call"?
Otherwise i can't hear so well... through registry's mod?
I ask this because i feel fine with these little tones on every tap on the screen, are comfortable so i understand that i have tap well, in the settings of device i have set also "low tones" but, for example, i play a video with max audio, and logically to every tap on display make a sound much higher, loud! I hope that you understand me...
So, does exist a way to solve it? much time ago i ask me this quest... its so for you too?
Sorry for my bad english, but i'm italian... thanks a lot!!!!
Somebody can answer me please???
I'm trying to improve the call quality, specifically what I hear through the main speaker, to make this phone useable. Currently its very tinny.
I found on a russian forum the dialpad code to engineers mode *#*#3646633#*#*. That brings me to a menu:
Battery Log
Touchscreen
GPRS
Audio
Camera
WiFi
Bluetooth
NetworkInfo
Autoanswer
YGPS
AGPS
EPO
VideoTelephony
Display
Memory
IO
Power
Baseband
FM Receiver
SIMMeLock
SystemLog
De-Sense
Matv
CPU Freq Test
BandMode
Can anyone provide an explanation or instructions for these?
I'm most interested in the "Audio" menu. If I select this I get:
K Tone
Normal Mode
Headset Mode
Loudspeaker Mode
Speech Enhancement
Debug Info
Speech Logger
From there I get drop down menus with FIR 0, FIR 1, FIR 2 etc, Ring, Key, Mic, FMR, Sph etc, Levels 0 up.. and two input boxes, one for value (0-255 and another, Max Vol. 0-60.
Any explanations, instructions or help would be gratefully appreciated.
Have searched this forum and google and the closest I can find is this but I can't make much of it, even with translate.
http://www.hacklabproject.org/mediawiki/index.php?title=Star_A5000_Miglioramenti
Thanks
Steve
I'm really excited that this might give some useful control to address a problem. I'm suprised that with all the experts out there no-one has responded yet. I'm sure the answer to this problem will help others with tinny phones too. Anyone....?
Did I put this in the wrong place? Not one answer :-(
wish i could help you, im looking for the same answer, except for music, it sounds tinny as heck, not originally but has developed a tinny sound that i feel could be fixed