I've spent the last few hours searching for the ways and guides on how to hack the HTC Magic and i think im about lost.
first of all i used to have the htc touch hd and it was as simple as running a program to get it to the right SPL then flashing it then throwing on a new ROM.
Now for the Magic i'm being told to put an image on an sd card the im told to make a goldcard but dont format the gold card? ive got the 8gb card that came with it! thats it.
im using windows 7 and ive tried to use HTC Sync but it wont detect the device.
ive gone in and updated the drivers with the ones that were recommended on here and still no detection
the device is a 32b
Radio 2.22.19.26I
hboot 1.33.0006 (SAP10000)
Australian Vodafone one
ive got no idea where to go from? what the hell do i do? i followed the guide here: http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking
i assume the drivers did install correctly as i type ADB Devices in my cmd box and it comes up with my devices Serial number.
after that it tells me how to use adb and fastboot? why do i want to knlow this? i just want to be able to update the rom and be able to put whatever applications i want on it and change the startup screen as well as a heap of themes and the likes.
i guess basically what im asking is whats the easiest way to root this device? i dont know where to go from when ive adb'd the device...
ive no idea what rom to put on or what to do. also its a 1.6 in the info box when i check it. so im assuming its the donut version.
take it i need to get it back to 1.5 but im struggling to do this..
these guides seem awefully difficult...
To root the phone, I followed this guide: http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
There is a link for Donut rooting also. Hope it helps.
you shouldn't have any issues with that spl, only that you have the vodafone au OTA donut
read up on one click - very quick and easy. you need to revert to cupcake before you can use flashrec though...
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
Htc Sync didn´t detect my phone either but i managed to hack it via goldcard procedure and i had a perfected spl 1.33.0014 32a device.
Now i got a rooted phone but Sync still doesn´t detect my phone and I´ve used 3 different PCs and different OSs - XP, Vista and Win 7.
i followed the one click. but it says to use htc sync which doesnt work. as im in windows 7 even with the updated drivers, with the goldcard thing i only have the sadisk card that came with the phone.
what i will try is turning the device into its boot loader and then runnning the RUU they supplied with the one click and see what happens.
just tried it with it in boot loader but usb isnt detected will try it with the actual phone on and see what happens
Edit: tried that also, still doesnt work just running the RUU file from unlockr.
I have a vodafone magic 32b with the 1.6 OTA upgrade. The guide on unlockr requires using a nbh file but the guide doesnt have a link to an nbh for vodafone only roger and it says that they couldnt find a vodafone one. I was also trying to use the relentless rooter but couldnt get it to work.
BTW are you using the newest version of HTC Sync because that is the only version that comes with the drivers for windows 7.
also do i need a specific RUU or anything? will the one i downgrade too the 1.5 be fine to use in australia?
i used this one
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=852&news_id=487
Hi
Try reading through this guide:
http://vivekgolecha.blogspot.com/2009/08/as-promised-i-said-i-would-come-up-with.html
Especially this part:
*Tip: If your computer says the drivers are installed but it is installing the wrong drivers, I recommend Uninstalling the drivers using this program, USBDeview, then plug the phone in again and choose the correct drivers in the SDK USB Drivers folder
Click to expand...
Click to collapse
The drivers are in C:\AndroidSDK\usb_driver or similar path.
The gold card method worked for me (I have an HTC Magic 32A), but I think I should point out that in step 13 of the gold card guide make sure that you choose Removable Disk under Physical Disk.
Here's also a guide to installing proper drivers:
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
Good luck
EDIT: By the way the guide says that you have to have a spare microSD card, because after transforming the microSD card to a "Gold Card" it can't be used for anything else. This is not true. If you have an microSD card adapter (to be able to access it from your computer), just put it in your computer's expansion card slot and format it as FAT32. This way you don't have to have to microSD cards to go through the procedure. If you don't have an adapter and you instead have to microSD cards, you can format the gold card through the phone, once you've got it up and running again, making it a normal, fully-working microSD card again
WinterKnights said:
also do i need a specific RUU or anything? will the one i downgrade too the 1.5 be fine to use in australia?
Click to expand...
Click to collapse
I dont beleive that vodafone use the RUU because they are upgraded OTA but if they did it would have to be a vodafone branded version. What i think you need is a sappimg.nbh as i heard there is a version that will work for all magics, ill have a look and try find you one. BTW i can only post once every 5 mins as my account hasnt been chaecked by moderaters yet sorry.
thanks LayzeeDK ill try it tomorrow after work and let you know how i go.
WinterKnights said:
thanks LayzeeDK ill try it tomorrow after work and let you know how i go.
Click to expand...
Click to collapse
You do that. I had a lot of trouble getting my phone flashed and rooted too at first, but after these steps you'll get the hang of it and it'll pretty much be a walk in the park next time
By the way don't waste your time on the one click method as it only works on a few certain SPL's.
Upgrade to the 1.33.2010 ENG SPL in the guide and you can flash most ROMs using fastboot and Amon_RA's Recovery ROM (if v1.5.2G doesn't work try v1.3.2 and v1.2.0). I wasn't able to flash and replace the stock recovery ROM until I upgraded to the 6.35.x Hero radio and 1.76.2007 SPL. If you can't either, you should still be able to use fastboot in USB mode to boot into Amon_RA's recovery ROM. Just place for example recovery-RA-sapphire-v1.5.2G.img in C:\AndroidSDK\Tools (or similar directory), turn off your phone, boot into fastboot by holding BACK and pressing POWER and connect your phone to your computer with the USB cable then type: fastboot boot recovery-RA-sapphire-v1.5.2G.img or whatever version you're using (in Windows cmd command prompt). The phone will reboot and boot into the custom recovery ROM. Remember to pull out the USB cable or you won't be able to access the SD card from within the recovery program.
WinterKnights said:
i followed the one click. but it says to use htc sync which doesnt work.
Click to expand...
Click to collapse
Hm??? I've used "One-click" myself because I have PerfectSPL (still have - 1.33.0010; and I don't have second microSD for "goldcard" and no willingnes to do it) and I've read procedure twice just now but nowhere I see anything about HTCSync ( I have no Windows so it could be hard to use HT CSync on Linux ;P )
So what are You talking about when You mention "one-click"? dunno
the one click procedure is on www.theunlockr.com its just what they call their way to hack the phone, however it doesnt work due to windows 7 ill also contact google/htc to see if they can help get the sync sorted.
Yeah, right, I'm reading this same article 3rd time and I don't see HTCSense anywhere unless You are reffering to comments then good luck but comments is not the procedure.
PS: are we talking about this same article? http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
HTC Synd v2.18 should be working with Windows 7, but here's a workaround:
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
And another guide to get USB connection working:
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
So... How did it go?
i get to here
(wait for the it to show a serial number underneath, if it doesn’t then reinstall the drivers from section I). Then type:
adb shell
cat /sys/class/mmc_host/mmc1/mmc1:*/cid
5. A code will display, write the code down (MAKE SURE TO WRITE IT DOWN EXACTLY!)
i get this
cat/sys/class/mmc_host/mmc1/mmc1:*/cid NOT FOUND
thats as far as i can get. i found another guide but it talks about having RC29 or RC7 to root the phone however i have DRC92
firmware 1.6, baseband 62.50S.20.17U_2.22.19.26I kernal 2.6.29.00479.g3c7df37
Related
Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable
Dont worry...
Hi there
I think is possible what you're trying to do, but in order to change your rom you don't need downgrading nowadays (HTC are not PSPs, hehe).
I have a magic from Vodafone ES, and what you have to do first is check your model, can be 32A (HTC) or 32B (Vodafone, less ram in cell phone), so you'll probably have 32B like me.
After this, you need Android SDK and drivers to connect your device usb, load a modified SPL via ADB/fastboot (there's a thread in the forum with the HBOOT collection, you need one of those in your cell in order to change the rom).
Summarizing:
1. check if 32B
2. get Android SDK to use the commands fastboot/ADB
3. replace SPL
4. continue with the cyano's wiki
I followed this: http://www.htcmania.com/showthread.php?t=74683 (sorry is in spanish and a bit outdated, but the apps you need like the SDK are in there, and you have some screenshots, you can skip the root part since cyano's mod is rooted already).
About the goldcard method, I dont know because mine hadn't had perfect SPL, I only had trouble with the usb driver, and downloaded HTC sync (look for it on google if you need) and adb/fastboot detected my device.
A good idea is to install a recovery image once you change your SPL, I personally recommend Amon_RA's recovery 1.5.2.
Last but not least, these explanations are the basics, I know it sounds like chinese to you but read more posts in the forum, there's a cyanogen flashing guide as well, with all the information and these steps you'll do fine.
Hope you'll succeed, let me know your issues
I do understand reasonably well but you cannot use the guide on here with a UK magic as the SAPPH.img file or whatever has an incorrect ID. it's at this point the process cannot be completed.
Thanks so much for your lengthy reply but in this case I believe my phone is unique and the problem cannot be be as easily resolved as you suggest. I must downgrade to 1.5.
Are any of the extreme android geeks able to shed light on this?
I can shed light on you as I have a Vodafone HTC Magic 32B. I used the instructions at the link below and got my phone back to Cupcake, but oddly enough I used the MyTouch instructions and searched online for a suitable sappimg.nbh file as the one they provided didn't work for me. Now I am running Qteknology MagicSense Hero ROM with working LEDs. Forget about ADB, SDK and the Goldcard method... I am sure you want the simplest way to unroot so you can get back to 1.5 and the reroot to whatever you like. Here it is: http://theunlockr.com/2009/10/15/how-to-root-a-donut-phone-android-1-6/
This is great news but I have tried that method with the sappimg.nbh and it says incorrect ID every time.
Are you using a UK vodafone magic then? If so, where did you find a SAPPIMG that worked?
Please try and remember!
It doesn't matter that your phone is a UK Vodafone Magic.. if you google sappimg.nbh and download a few until you get the one you need you will have your phone reverted back to it original state... ready to root. If you stop your search after one attempt you will not have done all you needed to do. You don't have to know any codes or get another SD card.. just put some effort into it from your computer. Google is your friend.
but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks
Hi
I have a UK Voda Magic and I followed this http://forum.xda-developers.com/showthread.php?t=579328 and worked perfectly for me
It truly is lovely of you all to try and help and I appreciate it but I suspect you have not read my comments properly.
Those of you that have commented here were only able to get it to work because you were flashing from/rooting from a 1.5 cupcake build. Once the OTA 1.6 donut update is on a UK magic it cannot be downgraded and so all comments thus far are superfluous. contrary to other comments it is necessary to flash SAPPIMG.nbh first and this does not work on my phone - incorrect CID.
Is there anyone on here that can help with MY issue?
Thanks.
Strange, because I have no issues flashing UK Voda 1.6 phones, just fastboot and use ADB to load recovery image, then flash whatever 32B ROM I like (Dwangs 1.17.1 is great). I did a work collegues before Christmas and his phone had never been modified, only received the OTA update from 1.5 to 1.6 around October time.
I'm on it. That's the way I used to flash roms back when i first got my magic. Now i've been thrown by all the simple guides to put cyanogen and I thought the sappimg method was the only way. I'll just download the sdk and get on my merry way
I don't understand what the issue is? I have a UK vodafone 32B and have been flitting between CM's mods, Hero mods backwards and forwards with no issues whatsoever?
I'm on CM's latest right now (well, a few back now 4.2.11 latest), just followed the instructions and it worked....?
I certainly did read your OP correctly and I also was on 1.6 when I followed the link I posted. In that link it has instructions on how to do it if you are on 1.5 OR 1.6
Started out with 1.5 Vodafone UK Magic which i've flashed many times using the fastboot boot cm-recovery-1.4.img method.
At one time i went back to stock 1.5 but let it update itself (OTA) to 1.6. Since then i've continued to flash new ROMs without problem.
Alfieg said:
but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks
Click to expand...
Click to collapse
hi alfieg
ive vodafone magic 32B with donut and perfect SPL, in present day, I tried all the guides and methods in many forums, without success, for example, if you follow the guide in wiki cyano, already the first step there are problems, how I try to update with sappimg. (cupcake 1.5) as the ends' update writes "main version is older," "update failed "... if you do not then a way to get cupcake is impossible to have root on magic 32b with donut and Perfect spl ....
Indeed in the wiki says, if you have donut Downgrading to 1.5 FAILED: HTC Magic Vodafone ES (Spain) (32B) Official 1.6 updated OTA "
wait a few geek we solve the problem ...
I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.
blackvyper said:
I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.
Click to expand...
Click to collapse
download a file, to make what? If you can not root for real?
Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr
No need to downgrade
Alfieg said:
Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable
Click to expand...
Click to collapse
I have a New Zealand Vodafone Magic 32B and they share the same Hboot 1.33.0004 (SAPP10000) SPL with the UK (and NL and AU) vodafone phones. That means they are VERY easy to load alternate ROMs onto. The horrible stuff many Americans and others have to go through to root their phones isn't required for us.
You do need to get the Android SDK installed and talking properly to your phone.
Assuming you have the SDK set up and you can see your USB-connected phone listed when you enter the "adb devices" command, then the rest should be easy. See the Cyanogen Mod wiki for the details. You want the section on "non-Tmobile 32B magics" on this page:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
It starts with:
"Non-TMobile 32B Magics
If the above doesn't work for you, don't despair. Some non-US Magics are shipped with a fastboot compatible SPL installed. If you see 3 skateboarding androids when you boot to fastboot, you should be able to do the following:"
..............
This is the part you want to pay attention to, assuming you have the SDK installed properly. Our phones are actually MUCH easier to load others ROM on because we have those fastboot-enabled SPLs already in place and this is the first, BEST way for us to do it.
Whatever you do, do NOT flash the "Danger SPL". There is no need to for an HTC Magic with the Hboot 1.33.0004 (SAPP10000) SPL.
If you're hopelessly lost at this point, seek hands-on local help. You don't know enough to do this by yourself without risking screwing up. if no one can help you, then take your time. Learn the stuff you need to know....Being in a hurry is a great way to go wrong. I spent 3 months reading and thinking about it before I loaded my first ROM. Much of the advice is for the Dream / G1 or locked MyTouch3G or Magic 32B phone from telcos who lock them....and simply isn't relevant for the HTC Magic 32B from Vodafone. the single section I'm pointing you to above is all we need to get it done.
Finally, here is my own "simple guide" for getting loading alternate ROMs on a Vodafone HTC Magic 32B. This is about OUR phone...and should work if you work your way through it.
http://truthseekernz.blogspot.com/2009/11/simple-guide-to-loading-new-roms-on.html
You don't need to worry about "gold cards" and all that stuff. You'll be flashing an already rooted ROM and you will have backed up your un-rooted original load with "nandroid" before you change ANYTHING. That backup is your path back to the way your phone was before you rooted it by flashing an already rooted system ROM. in loading ROMs like Cyanogen's you're not baking a cake, you're buying one....so you don't need to know how to make one, you just need to know where to get one and how to serve it....if that analogy makes sense.
Simply, you start by: fastboot boot RA-recovery-1.5.2G.img:
Then, from the recovery menu of functions you do these steps:
1. Backup (nandroid)
2. Wipe system / data
3. Wipe cache
4. flash from any zip on sdcard (the one you want to flash today, you may have put several different ROM images in /sdcard)
5. reboot to brave new world.
6. Make a backup copy on your PC of the /sdcard/nandroid folder on your sdcard so you won't lose it accidentally if your sdcard is corrupted, lost or stolen.
Done.
To save time and let you backup / flash ROMs anywhere you happen to be standing, you can flash Amon-RA's recovery onto your phone or you can load it via fastboot every time and leave the default recovery in place. The very first nandroid backup you made will have backed up the factory recovery image as well as the factory system image as they were at the time you backed them up. So they can be restored if you want to at some point update them with an OTA update. I suspect Vodafone / HTC will be rolling out an Android 2.0 / 2.1 update to Magic phones at some point. If they don't that would be a black mark against them....something to remember when thinking about buying any future phone from anyone: "WILL THEY SUPPORT IT FOR THE SAME 2 YEARS YOU'VE SIGNED UP FOR".
If the answer isn't YES......then that's worth remembering. Vodafone / HTC's record so far is good. The last OTA update was barely 3 months ago.
Alfieg said:
Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr
Click to expand...
Click to collapse
Get latest version of fastboot binary. I had problems with original one and htc magic. Drop fastboot.exe into the sdk tools folder.
Reboot your phone holding back and power simultaneously.
Then plug usb cable.
in Dos prompt go to sdk tools folder and type "fastboot devices"
if your device is listed you are good to go.
then "fastboot boot cm-recovery-1.4.img"
(If ROM installed via official HTC RUU- RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver.exe)
UPDATE!! **SOLVED** April 25, 2010
Download new RUU
http://www.multiupload.com/XQEH9NVGY7
Flash with Goldcard method http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
1. Download RUU linked above.
2. Install update using RUU.
3. Turn on phone and connect to computer.
4. Get RA recovery and SPL also linked above and drop them to sdcard root directory.
5. Run SDK: adb shell
6. Install recovery: flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img http://forum.xda-developers.com/showthread.php?t=561124
6. Turn off phone and turn on again holding Power+Home. RA Recovery should appear.
7. Flash zip from sdcard.
8. Use file: update-hboot-1762007-signed
9. Done. PSPL broken.
10. Build a shrine for orange_24
****************************************************
**Not Successfully Rooted: Feb. 2, 2010 (AFAIK)
I decided to start this thread because the info for again obtaining root, for those of us dumb enough to update to the official Rogers ROM 3.05.631.7 via the RUU, is all over the place in about a million different threads. My hope is that we can organize it all in 1 place.
At this point, yes, we all know we were impatient and newbs and everything else. Ok, lesson learned. So, lets move forward and try to get this thing rooted.
If you are a developer who has the talent to help root this ROM and have lost interest in the Magic or moved on to the Nexus One or Droid, we ask that you please try to spend a few moments on this and help out those of us who are really stuck here. Personally, I'm getting pretty desperate and thinking of even replacing the phone.
Please post what you've tried in attempting to again obtain root, your failures and hopefully successes.
*One Click Root: http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/ Cant' back up Recovery.img Error(Tried clicking the hidden Star next to "Back Up Recovery" and skipping this step...and just flashing recovery-RA-sapphire-v1.5.2H.img. Didn't work either) Tried with Amon_RA Hero recovery.img also, without success.
*Tried downgrading to Rogers' last official ROM via the RUU for (Rogers)_RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver.exe RUU would not let me proceed because the ROM was older than the one installed. Attempted several times both with and without a goldcard installed.
*ADB: Will see the device, initially, but a command of "adb remount" kills the connect. same with "adb root" **EDIT
*Fastboot: Error- Does not allow access
*Relentless Rooter: http://forum.xda-developers.com/showthread.php?t=556200 No luck obtaining root
*Fix Perfect SPL: http://forum.xda-developers.com/showthread.php?t=548218&highlight=create+gold+card With one GoldCard getting Update Fail error that SAPPIMG is older than one installed. When trying the other GC, get Update Fail Error that Model ID is incorrect. Tried 2 different micro sd cards, one Sandisk and one Patriot. The card was recognized by my pc after I was done creating the GoldCard, so unless I'm doing something wrong the GC was created properly. Is the goldcard.img supposed to dissapear or remain on the card after your copy/paste write/save to the sd card disk?
* Tried RUU for RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver.exe http://forum.xda-developers.com/showthread.php?t=625108 RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
*Tried RUU for RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe http://forum.xda-developers.com/showthread.php?t=621415 RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
*Tried RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
I've probably tried a few more methods to obtain root. Those were all fails, too. I'll post the links, as well, when I find them again.
Hopefully this thread will lead us all in the right direction.
Here is the link to the same topic in the HTC Dream Forum-in case they find out something that might help us out: http://forum.xda-developers.com/showthread.php?t=625732
i guess its time to play doctor with my new phone from rogers and swap the board from my old one.....
considering nothing works, i think any new idea would be a good idea
novadoc said:
considering nothing works, i think any new idea would be a good idea
Click to expand...
Click to collapse
like i said my idea was to swap my old motherboard into the new phone
you can give it a shot
but personally, unless you know exactly what your getting into, i wouldn't mess with the hardware
novadoc said:
you can give it a shot
but personally, unless you know exactly what your getting into, i wouldn't mess with the hardware
Click to expand...
Click to collapse
i already did it lol im more of a hardware then software
I know it might be nothing but when the Rogers RUU unpacks the img file loads as sappdimg and not sappimg. I don't know if the extra d in there means anything or if its something that shows up later.
I also try every method above and not luck also...
is there a possible way of tricking the system... with a higher build number and SPL with a custom installation from files that I see from one of the post where rogers send the user some files because they were running Win7?
I think that's the problem
We have the highest spl# and its perfected
So until someone gets their hands on a higher version than ours that is imperfect or engineering...
We are SOL, although I am hopeful someone is working on this for us.
shael said:
i already did it lol im more of a hardware then software
Click to expand...
Click to collapse
Did it work?
I have an Rogers HTC Magic and I didn't apply any update from Rogers since I bought it on June 2nd.
It's very strange that "adb devices" doesn't see the device?
have you enable the "USB debugging" ?
That part should work (when the devices is started).
novadoc said:
Did it work?
Click to expand...
Click to collapse
pfft ya ofcourse it worked... i have my older motherboard with my old rom and my old info all i did was swap the screen and case.... done deal... 5 min job lol
Would someone please report the radio and SPL versions (for the result of the 3.05.631.7 update)?
feisty_noodle said:
would someone please report the radio and spl versions (for the result of the 3.05.631.7 update)?
Click to expand...
Click to collapse
apphire pvt 32a ship s-on h
hboot-1.76.0010 (sapp50000)
cpld-12
radio-6.35.10.18
feisty_noodle said:
would someone please report the radio and spl versions (for the result of the 3.05.631.7 update)?
Click to expand...
Click to collapse
apphire pvt 32a ship s-on h
hboot-1.76.0010 (sapp50000)
cpld-12
radio-6.35.10.18
Well, until it gets cracked, here's something that will make you feel a little better about being stuck on this ROM.
Google Search by Voice, installable .apk from Euro Android Market. Just run the installer through Astro, etc., and G Search by Voice is back on the Search button of your phone. You might need to launch the app first via the icon in the app tray, then reboot the phone to make the search button recognize its there. But it will be there.
http://www.eclosion-android.com/com.google.android.voicesearch.apk
BTW, not my link in case mods want to get involved.
Enjoy!
i think the first step would be to getting ADB working again
any ideas?
novadoc said:
i think the first step would be to getting ADB working again
any ideas?
Click to expand...
Click to collapse
I can used adb devices to see my connected htc magic.... but other function permission not allow...
Is this thread in the Dream Forum a path to follow to try, or just a good way to brick your Magic? I haven't fully read through it to see if this is to keep root, if you already have it and flash the Rogers Dream ROM for data/ or to regain root if you flashed the official Rogers RUU with a Dream. The post says should work on all Rogers phones, but i feel a brick coming on for me.
http://forum.xda-developers.com/showpost.php?p=5480955&postcount=416
I installed 32A (6.35.10.18) radio on my Tmobile mytouch 32B by mistake.
Before doing this I had my phone rooted and SPL (1.33.2005 i think). Now fast boot shows its a 32A device . Now not able to run recovery mode.
I am not able to revert it back to 32B radio.
Tried to unroot but it says version is older(with gold card).
Some one please help me......
betaboy said:
I installed 32A (6.35.10.18) radio on my Tmobile mytouch 32B by mistake.
Before doing this I had my phone rooted and SPL (1.33.2005 i think). Now fast boot shows its a 32A device . Now not able to run recovery mode.
I am not able to revert it back to 32B radio.
Tried to unroot but it says version is older(with gold card).
Some one please help me......
Click to expand...
Click to collapse
You should be able to flash a radio image from fastboot. All you would need is to connect via USB. The phone will show 'fastboot usb' instead of 'fastboot'. You'll need the android sdk in order to go any further. Place the radio you want in the tools folder of the sdk so that it's easier to get to. Bring up a command prompt and navigate to the tools folder.
For me it looks like this:
cd\
cd androidSDK/tools
From there you'll need to make sure that the android drivers are installed properly. You can do this just by typing this:
fastboot devices
This will bring up a serial number if the drivers are installed correctly. If not you'll need to get the appropriate drivers. I believe I found mine during the gold card root process on the Unlockr's site.
As soon as your computer is talking to your phone it's simple.
In your command prompt simply type the following:
fastboot update <radio.img>
fastboot reboot
This will reboot the phone and it should reflash the radio. I've never had to do this so I don't know if it is going to work. Take these words with a grain of salt though... this could still brick your phone. Who knows? Next time just make sure you have the appropriate files. Especially when dealing with radio and spl. You're lucky your phone even turns on.
Good luck!
yeah i did the same last night, but mine is stuck with RUU USB and since the SPL is perfect i cant do anything as i get a signature verify fail or remote: can not do message
If you find a solution id be very interested.
Cheers.
Hi phantommusik,
Thanks for your response. This what I get when I do update radio.imp
"EOCD not found, not Zip
error: failed to access zipdata in '☺'"
No clue what it means
I am by no means an expert on the 32B Magic, but...
Try creating a Goldcard. There are instructions on this forum.
Then, even if your phone is stuck in RUU mode, you should be able to apply this RUU for the 32B Vodafone Magic.
http://forum.xda-developers.com/showthread.php?t=640283
I warn you though, you might end up with an unrootable phone. But at least it will work.
EDIT: Pay careful attention to these steps. Make sure a goldcard is in your phone before starting.
- Download and run the RUU executable
- When the wizard is at step 1, open a file search dialog
- Look for a file named rom.nbh (should be in %temp% folder)
- Copy the rom.nbh to another folder and rename it to SAPPIMG.NBH
- Close the wizard
- Copy the sappimg.nbh to the root of your SDCard
- Power down your phone
- Boot your phone while pressing "volume down"
- It will ask you to update (wait a bit till the question pops up)
- Press trackball to start update
- After update press trackball again to reboot
Sorry!
betaboy said:
Hi phantommusik,
Thanks for your response. This what I get when I do update radio.imp
"EOCD not found, not Zip
error: failed to access zipdata in '☺'"
No clue what it means
Click to expand...
Click to collapse
I know exactly what that means!!! It means I didn't give you complete instructions! My bad! When you are flashing anything from recovery or fastboot it has to be a .zip file or .nbh. I'm not entirely sure what needs to happen in order to get it to read it but you could try sticking that radio in a .zip file with NO COMPRESSION. You might want to take a look at some of the other threads in here to see what they have to say about putting just a radio in a zip file! I would suggest downloading a radio update that is already a zip file!
Hope this helps!
One friend of mine did exactly the same thing. I used the instructions on this post and I managed to get him his 32B Magic back.
becareful flashing this rom, it is perfected and you cant root it and if you can i wanna know how !
I tried updating the new RUU when in fastboot, but there was an error saying incorrect id.
Then I coppied rom.zip file and renames it to sappimg.zip, hboot hung when updating RADIO_V2.
Please help me, its ok even if cant root the phone.
gymmy said:
becareful flashing this rom, it is perfected and you cant root it and if you can i wanna know how !
Click to expand...
Click to collapse
Listen. If you really don't know, stop misleading people. You can't root this ROM, but you can install one that is already rooted. This ROM has the kernel fault that allows flashrec to install a custom recovery ROM. From then on you can do whatever you like with your phone, even revert it back to 32B. Amon_Ra's ROM for 32B Magic is a good place to start. Read here the post my friend wrote to thank me about getting his Magic back (It's translated from Greek, hence the bad English).
betaboy said:
I tried updating the new RUU when in fastboot, but there was an error saying incorrect id.
Then I coppied rom.zip file and renames it to sappimg.zip, hboot hung when updating RADIO_V2.
Please help me, its ok even if cant root the phone.
Click to expand...
Click to collapse
You' ll need a goldcard to use this. Stop doing things that can mess up your phone even more (like sappimg.zip etc). Just use the instructions in the link I posted before. About rooting please read my reply @gummy just above.
When I ran "RUU Sapphire HTC Arabic Etisalat" the installation got sturck at 77% (updating radio).
I removed the batter and plugged it back, now the phone got struck in RUU mode couldnt go to fastboot....... does it mean its bricked?
betaboy said:
When I ran "RUU Sapphire HTC Arabic Etisalat" the installation got sturck at 77% (updating radio).
I removed the batter and plugged it back, now the phone got struck in RUU mode couldnt go to fastboot....... does it mean its bricked?
Click to expand...
Click to collapse
Repeat the process with the RUU. It did the same thing, when I used it and after 1 or 2 tries the ROM was flashed properly.
My Fender got bricked by flashing the radio and spl and now I can only get to the bootloader menu.
I tried the sappimg.nbh method and it didn't worked, tried with three sd cards including a Kingston one.
The error the Phone says that the wrong Main Version is Older.
The only other option I have now to unbrick it is using a goldcard but without the cell phone booting up I am not sure If I can make one.
Now my question.... Is there a way to make a goldcard without my mytouch fender?
If you can make it to the fastboot screen, you're not bricked. Bricked implies you can't do anything, zilch, nada, nothing.
You can still do adb shell in fastboot mode in order to get the info from the phone.
Read the link in my signature very carefully if you're trying to root your fender. There are currently no (working) customized roms for the fender, and your best bet is the rooted stock copy.
ADB shell in fastboot?
are you sure you can use adb shell in fastboot? I thought that was why there were fastboot commands.
Either way if it's possible to make a Goldcard without the phone, I need to know too. I get the "FAILURE remote not allow" error in fastboot with ANY commands and can't boot to recovery...
Unless of course I can use ADB shell in fastboot, then i'm back in business, i'll try it later this evening
OK, I gave it a shot and it does not work, can't use adb shell or any adb commands with the phone in fastboot, must use fastboot commands.
So if anyone here knows how to make a Goldcard without using the phone to make it or can send me a Goldcard from their phone I would greatly appreciate it... I'm SOL without it.
kbeezie said:
If you can make it to the fastboot screen, you're not bricked. Bricked implies you can't do anything, zilch, nada, nothing.
You can still do adb shell in fastboot mode in order to get the info from the phone.
Read the link in my signature very carefully if you're trying to root your fender. There are currently no (working) customized roms for the fender, and your best bet is the rooted stock copy.
Click to expand...
Click to collapse
fibofan said:
OK, I gave it a shot and it does not work, can't use adb shell or any adb commands with the phone in fastboot, must use fastboot commands.
So if anyone here knows how to make a Goldcard without using the phone to make it or can send me a Goldcard from their phone I would greatly appreciate it... I'm SOL without it.
Click to expand...
Click to collapse
I'm just a tad confused though... if you didn't have a gold card to begin with, how did you get where you are now, since you couldn't flash anything new on a perfected SPL to begin with.
So... It is possible to make the goldcard? I can only access the fastboot menu no the recovery.
cmarti said:
So... It is possible to make the goldcard? I can only access the fastboot menu no the recovery.
Click to expand...
Click to collapse
If you can't get into shell on the phone you wouldn't be able to generate the code needed to make a goldcard... it should have been the first thing you did before you started to flash anything.
cmarti said:
My Fender got bricked by flashing the radio and spl and now I can only get to the bootloader menu.
I tried the sappimg.nbh method and it didn't worked, tried with three sd cards including a Kingston one.
The error the Phone says that the wrong Main Version is Older.
The only other option I have now to unbrick it is using a goldcard but without the cell phone booting up I am not sure If I can make one.
Now my question.... Is there a way to make a goldcard without my mytouch fender?
Click to expand...
Click to collapse
Gold card isnt going to fix this issue. You need to find a rom that is a later version that the one on the phone.
kbeezie said:
If you can't get into shell on the phone you wouldn't be able to generate the code needed to make a goldcard... it should have been the first thing you did before you started to flash anything.
Click to expand...
Click to collapse
If you know someone with an android phone take your sd card around and get the information you need using their phone. I made mine with a windows CE device using Haret works fine.
G.
gymmy said:
If you know someone with an android phone take your sd card around and get the information you need using their phone. I made mine with a windows CE device using Haret works fine.
G.
Click to expand...
Click to collapse
I'll buy it from you
gymmy said:
If you know someone with an android phone take your sd card around and get the information you need using their phone. I made mine with a windows CE device using Haret works fine.
G.
Click to expand...
Click to collapse
The last two times I had to make a goldcard (MT3G LE and MT3G v1) , it seemed to be specific to not only the model of the phone but your exact phone and SD card combination, thus how it generated a code to be decyphered and then written onto the front of the card with the hex editor. So it was my impression that you could not simply make a card with another phone and then use it on yours.
Then the phone is dead right?
cmarti said:
Then the phone is dead right?
Click to expand...
Click to collapse
Don't give up hope yet... The CID is unique to each card, if you can read the CID from another android phone or even a Palm, WinMo device, etc. then you can still make a Goldcard with your PC and use it in your phone.
From all the research I've done it's just not possible, to get the CID from the Card with your PC.
fibofan said:
Don't give up hope yet... The CID is unique to each card, if you can read the CID from another android phone or even a Palm, WinMo device, etc. then you can still make a Goldcard with your PC and use it in your phone.
From all the research I've done it's just not possible, to get the CID from the Card with your PC.
Click to expand...
Click to collapse
How sure are you about that. I made a gold card with my 4GB SDHC when I had the MyTouch 3G (white v1), then when I upgraded to the MT3G LE Fender, I could not use the same card again as it was, I had to redo the process and ended up with a new CID on the same card, but diff phone and once I made that a gold card with the new information, then it worked in my Fender. That's why I'm skeptical bout "generic" gold cards.
Well if that's the case is there anyone from this forum (preferebly from the US) that I can mail the phone to so he can fix it for me?
I can pay either via paypal or mailing the money.
Ive been there too, my phone is semi bricked and the only way to unbricked is using goldcard, and im using fedora to see the sdcard CID to make the goldcard. and it works like a charm
* sorry for my bad english
fibofan said:
Don't give up hope yet... The CID is unique to each card, if you can read the CID from another android phone or even a Palm, WinMo device, etc. then you can still make a Goldcard with your PC and use it in your phone.
From all the research I've done it's just not possible, to get the CID from the Card with your PC.
Click to expand...
Click to collapse
PLEASE Explain !!!
What's Fedora?
fibofan said:
PLEASE Explain !!!
What's Fedora?
Click to expand...
Click to collapse
Fedora is a distribution of linux, basically sounds like he's saying can get the CID of an SD card from *nix or BSD.
Tell you what... The fender has defanately weded out the people who cant pay attention to instructions. If you didnt make a goldcard... How did you downgrade?
You couldnt install a recovery so you didnt wipe, you didnt install another rom over the top..
Id laugh my ass off if you just reboot it and leave it alone and it works.
Sound slike you should stop trying and give your phone to someone who can use it.
Just because he isn't as computer savvy as you doesn't give you the right to belittle him.
Don't be such an ass.
hi all. I’ve been trying to unlock desire HD for a while and eventually managed to get it sorted.
The info was on this site, but scattered around a bit, so if this is useful (i.e. all in one place) let me know..
Like all these things:
IM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE, AND YOU SHOULD ONLY DO THIS IF YOU KNOW WHAT YOU ARE DOING...!
IT WORKED FOR ME FIRST TIME. I DID THIS AS AN EDUCATIONAL EXERCISE ON A BRANDED ORANGE UK HTC DESIRE HD PHONE.
This was done with no sim card installed at any point, just a formatted SD card.
First do a factory reset of the phone with an SD card inside, no sim.
Start the phone, and go through the basic setup, by skipping most things, just so you can get to the home screen.
Step 1. Put your device in USB debug mode.
Press 'settings', then 'applications', press 'development', then tick 'usb debugging'
Step 2. Get visionary and install to the phone to do temproot, then permroot.
The apk file you need is com.modaco.visionaryplus.r.14.apk
I will try to upload, if the site lets me. Otherwise a quick search will find it.
Once it is installed to your phone (i used the htc desktop sync tool to install the app) by connecting my phone, select htc sync as the type of connection (as opposed to charge only) then from HTC sync suite (on your PC) select application installer, then select the visionary .apk file.
Once installed, disconnect the phone and power cycle the phone. (With all the power cycles mentioned in this post there is no 'holding of other keys' required)
Once back up, go into settings on the phone and you will see the visionary logo in your list of applications.
Start the application, and you will see the temp root option. Select this, and then come out of the application and power cycle your phone.
Once you do this, and the phone is back up again, go back into the visionary app, and then select permroot option.
Then again power cycle your phone. BTW, i did not select the tick box to make the folders r/w, some instructions said to do this.
Once you have restarted the phone for the second time, it should be perm rooted. To confirm its rooted, you can take the time to install a terminal program, and run an 'SU' command, but i did not bother. I just figured that the permroot worked.....which it did...
OK we are finished with visionary, thanks visionary guys..!
Step 3:
You need to get hold of the 'HD easy radio tool', again, i will try to upload the file.
Basically you need to unzip the zip file to a folder on your PC. Connect your HTC Desire HD, and then select 'charge only' in the phone selection. (i happened leave the HTC sync suite running on the PC, even though it was idle)
Go to the folder you unzipped on your pc and run the desire hd easy radio tool_V2_2.exe. you then get several options to choose. I went the whole way and selected the first option 'super CID,s-off, unlock'
Then proceeded to do it. It took about 30s to 1m. You should get a message that it was successful.
Thanks easy radio tool guys!!
Step 4.
You need a ROM, or RUU file. I chose this one. Its quite a large file and i will try to upload. I got it from this (xda) site, but cant find it now. From what i understand this one is completely 'blank' ie it does not appear to have lots of modifications, and it appears (from what i see on my phone) to be a clean factory rom. I tried to upload, but too big for site. You may need to google it.
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
Connect your phone (again in charge only mode) and then start the 'RUU_Ace....' application on your PC.
It will start an HTC installer application that will try to connect to your phone. It will then show the current ROM you have installed, and confirm that you want to update to the one shown.
Remember to have a good charge in your battery, and don't disconnect during this point, you will brick your phone if you do. Make sure your PC does not go to sleep, and have it on external power if its laptop.
The flashing process takes about 2-5 minutes.
Once complete the pc htc application will tell you all was good.
The phone needs to be rebooted, if it has not done so already, and when it starts up, the phone will be brand new. No orange logos, no orange s/w, and fully unlocked to use any SIM card.
Good luck!
The only thing is using the 1.72 ruu you will lock yourself out of hboot and you missed off eng s-off as you would need this if you decide to flash a different Rom or update the radio
You also will not have root access once flashed as its been explain in the forums including the thread warning do not flash 1.72
The method is good but add the eng s-off and advise to flash 1.32.405.6 not the 1.72
E=Mc2
Thanks, this worked for me first time.
what does the eng s-off mean and will I have any problems with OTA updates?
sorry new to this
Thanks
smeg90 said:
what does the eng s-off mean and will I have any problems with OTA updates?
sorry new to this
Thanks
Click to expand...
Click to collapse
Eng s-off will give you access to flashing radio updates and other hboot uses and give you complete unlock and access to the phone as for the updates not sure if you will get them now
E=Mc2
leith51 said:
Eng s-off will give you access to flashing radio updates and other hboot uses and give you complete unlock and access to the phone as for the updates not sure if you will get them now
E=Mc2
Click to expand...
Click to collapse
Thanks.
is it possible to reflash with 1.32.405.6 using this guide or am I stuck because I can't root?
I'm sorry, but lol. You've made a guide which is utterly useless due to the fact you are telling people to flash an official 1.72 ruu. Bad mistake.
Sent from my Desire HD using Tapatalk
smeg90 said:
Thanks.
is it possible to reflash with 1.32.405.6 using this guide or am I stuck because I can't root?
Click to expand...
Click to collapse
Can you get into bootloader which is turn fastboot off in applications then power off then power up while holding volume down and power button keep pressing till phone powers up if it does might have a chance of going back to 1.32.405.6 let me know if it does I will help you get back if I can
Also my guide how to flash radio.img gives the same information here on how to debrand your phone with links to the threads with the tools to use
E=Mc2
liam08 said:
I'm sorry, but lol. You've made a guide which is utterly useless due to the fact you are telling people to flash an official 1.72 ruu. Bad mistake.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
What makes it worse mate is all he done is downloaded the tools then made a guide then uploaded the tools what could work well if it was the right ruu and included how to do eng s-off which is required
My guide on how to flash radio.img has also got all the info all ready and links to the right threads to do everything you need before flashing anything
So this thread is pointless really the op should have read better
E=Mc2
Hi got into bootloader ok.
Sent from my Desire HD using XDA App
Please remove the easy radio tool from the attachments and give link to my thread to download it. I like to keep count of downloads and keep it from spreading
smeg90 said:
Hi got into bootloader ok.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
good good
right here goes nothing once again like every one else if you attempt this its at your own risk you can leave the phone as it is if you choose to do so
here is a link to another thread how to downgrade to 1.32 you can follow this guide as there is a high chance it will work but it is difficult to get your head round
but the other option you could try is the way i did it when i wanted to clean my phone of everything i had done including installing custom rom with build 1.72 it did work but it does not work on every phone im told download the signed.exe ruu of 1.32.405.6 from >>>>>here<<<<< 7th one down from top of list
you will need htc sync installed then plug phone in set to charge only
extract the zip folder to the desktop
then run the ruu.exe as you would any other application double click it
follow on screen instructions yes it does take a while and it will wipe your phone of anything you had on it so do a back up of what ever you want to keep
dont forget you can back you contacts up to sd card using people>menu>export to sd card
like i said it is your choice if you use this information i take no responsibility if anything goes wrong but the second option is the way i did it and my phone is running
good luck if you do do it either way let me know how it goes
jkoljo said:
Please remove the easy radio tool from the attachments and give link to my thread to download it. I like to keep count of downloads and keep it from spreading
Click to expand...
Click to collapse
i dont blame you for saying that mate but to be honest the whole thread should be taken down as it gives false impression and tells ppl to flash 1.72 so in turn losing root
leith51 said:
good good
right here goes nothing once again like every one else if you attempt this its at your own risk you can leave the phone as it is if you choose to do so
here is a link to another thread how to downgrade to 1.32 you can follow this guide as there is a high chance it will work but it is difficult to get your head round
but the other option you could try is the way i did it when i wanted to clean my phone of everything i had done including installing custom rom with build 1.72 it did work but it does not work on every phone im told download the signed.exe ruu of 1.32.405.6 from >>>>>here<<<<< 7th one down from top of list
you will need htc sync installed then plug phone in set to charge only
extract the zip folder to the desktop
then run the ruu.exe as you would any other application double click it
follow on screen instructions yes it does take a while and it will wipe your phone of anything you had on it so do a back up of what ever you want to keep
dont forget you can back you contacts up to sd card using people>menu>export to sd card
like i said it is your choice if you use this information i take no responsibility if anything goes wrong but the second option is the way i did it and my phone is running
good luck if you do do it either way let me know how it goes
Click to expand...
Click to collapse
Will give it a try and report back
Thank you for your time..
So is it possible to debrand an/or sim-unlock the Desire HD without to root your phone because I would like to update my phone with regular ota updates from HTC ?? And because my phone is sim-locked I can't download the new software version OTA 2.2.1 ??
milosmeda said:
So is it possible to debrand an/or sim-unlock the Desire HD without to root your phone because I would like to update my phone with regular ota updates from HTC ?? And because my phone is sim-locked I can't download the new software version OTA 2.2.1 ??
Click to expand...
Click to collapse
Trying to do both at same time I do believe if its locked to network you need to create a goldcard first
E=Mc2
Can you point me to the link on how to create goldcard aor the whole proces of unlocking the desire hd,...
milosmeda said:
Can you point me to the link on how to create goldcard aor the whole proces of unlocking the desire hd,...
Click to expand...
Click to collapse
Sorry I'm at work so no where near computer I can only suggest googling how to create a goldcard it should bring up unlocker.com normally really good for info on there
E=Mc2
connection problem
Hi I have a vodafone branded DHD its not sim locked, and Its already rooted and I'm trying to flash a different rom.I've downloaded the RUU and when i run the .exe it says Verifying pda phone etc then error 170 it can't find the phone.I have it in charge mode and it shows up under device manager as. ADB interface> My HTC .I've tried every connection option but it won't find my phone.all the drivers are installed and i can use htc sync to install aps. anyone got any ideas thanks.michael
mackemsrule said:
Hi I have a vodafone branded DHD its not sim locked, and Its already rooted and I'm trying to flash a different rom.I've downloaded the RUU and when i run the .exe it says Verifying pda phone etc then error 170 it can't find the phone.I have it in charge mode and it shows up under device manager as. ADB interface> My HTC .I've tried every connection option but it won't find my phone.all the drivers are installed and i can use htc sync to install aps. anyone got any ideas thanks.michael
Click to expand...
Click to collapse
An RUU is a pre-packaged install from a vendor? Do you mean a proper custom rom?
If not, then you will unroot your phone