Database Info

COUNTRY ID error??

I tried to install the following ROM: http://forum.xda-developers.com/viewtopic.php?t=22591&highlight=ftp+site
I did everything like the instruction said but after a few seconds of collecting data from my MDA, the program on the pc said "Country error 120".
What now? I'm trying to make my german MDA compact into an english one.
-John

This problem has been posted many times on this forum...
Anyway replace the 'ROMUpgradeUt' with 'MAUpgradeUt_noID' available here:
ftp://ftp.xda-developers.com/Magician/Tools
Also don't forget to disable the USB connection by right clicking ActiveSync and unchecking the box.

Disable USB? But if I disable the USB how can upload the ROM files to my MDA? I use a USB connection to connect the MDA to my pc.
-John

Trust me it will work- I only did it yesterday to upgrade my mates ROM to 1.12.
He tried to do it himself but it didn't work. When I did it, the only thing I did different was to disable the USB in Active Sync.
Try it and see if it works... its takes about 20 mins to perform the whole thing.

Not sure if I`m missing something but everytime I attempt to connect to the ftp server above (since I`ve got the same problem) I get "access denied" when I connect via ftp.

Not sure if I`m missing something but everytime I attempt to connect to the ftp server above (since I`ve got the same problem) I get "access denied" when I connect via ftp.
Click to expand...
Click to collapse
Make sure you change the login credentials in Internet Explorer; when you get the access denied message go to File> Login As and change the username xda and password to xda.
If that still doesn't work, use a FTP client software package- some people have reported to have problems with FTP when accessed through Internet Explorer.

Anyway replace the 'ROMUpgradeUt' with 'MAUpgradeUt_noID' available here:
Click to expand...
Click to collapse
Ummm... where do I put this file? I'm trying to run the exe file called "o2asia_11100_922_11100_ship" with the instructions I got from the link I posted on my first post.
I opened the exe file "o2asia_11100_922_11100_ship" with winzip just to see it's content and it has the "ROMUpgradeUt" file but if I replace it and try to run the exe I don't think it will work as the installer is looking for the original "ROMUpgradeUt" and not "MAUpgradeUt_noID".
That's why I wanted clear instructions because I really don't have a *** clue what I'm doing and I really really REALLY can't use the internet now very much as I can only visit off-work sites at my coffee breaks.
So please, help me, I have all the files now but I don't know what to do with them!
-John

Can't get it to work. Here's what I did:
Extracted all the files from "WWE_11200_128_11210_ship" into d:\mda
Did everything as stated here: http://forum.xda-developers.com/viewtopic.php?t=14973
But doesn't work. I does upgrade, but the upgrade takes like 10 seconds, then it says to cold boot the mda and after a cold boot it is back in German language.
What am I doing wrong? The .bat file I made does some changes and I am doing everything like the instructions say but something must be wrong here. Please help.
-John

Works now, well at least it is now upgrading so something must be rigt... now I just have to wait
And to contribute and help other newbies - The BEST instructions (in my opinion) are those from "NemesisDE" in this thread; http://forum.xda-developers.com/viewtopic.php?t=14973&postdays=0&postorder=asc&start=75
See pages 4 and 5. Read the instructions on page 4 and then see page 5 for further info = where to download the large rom file as it's been moved and also get the MaUpgradeUt_noID.
To clarify: After you have the ROM (I used WWE_11200_128_11210_ship), download also MaUpgradeUt_noID.
Then you can proceed with NemesisDE's instructions, they are VERY good. I had no problems converting my german MDA compact into english.
Now this is the type of information I should've gotten yesterday... but now it works, I'm happy.

Please Helllp!

Okay so im new here and i dont know exactly where this post should go but im putting it here anyways. i just got my at&t tilt and i love it, but im having trouble putting applications on it. I download the apps to my computer and unzip them but then i dont know what to do. the only app i was able to put on my phone was kaisertweaks and im not even sure how i manged to do that. just please give me like a step by step because i am soo confused. thanks a bunch

Heya,
the first thing i would recommend is the Kaiser Wiki - there are a lot of useful informations for you and all important links for that device.
There are two versions of installers - desktop installers which you start on your computer (xp, vista or what ever...) they will be installed via active sync on your device. The other ones are cabs (i prefer them because i don't want useless files on my desktop computer), these files are meant to run on your PDA,
just copy the cab to your device, locate it with file explorer and click - the setup will start. In the Hermes wiki is a little description about CAB-files, maybe also useful for you (btw: Hermes isn't your PDA, you're device is Kaiser...! )
HTH

Noob Question Need Help

Please dont get mad i looked every where to see if this had already been posted. When i run Hard-SPL I keep geting to 260 error it starts just fine asks me if i will grant access to the application which i do and it starts to do its thing but then halts and i get the 260 error and it dose not go any farther any suggestions?

did you remove your sim and sd card?
In addition, if you have not removed them back up your data. Then do a hard reset. Then remove sim and sd card. It maybe an open port problem so restart your computer as well. Hope this helps.

tried
Gave that a try after it asks if it is alright to load the file on my phone it auto resets phone then 260 error happening again im on vista 64 bit and even tried what the main website said for vista users but half the guide dose not really apply so im not sure what to do or what im doing wrong. any more suggestions?

Need Help
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!

sorry i couldn't help you i always thought a 260 error was due to open connections or ports.
When you downloaded the zip file for hardspl did you use vista's unzip?
If so you may get an error because vistas unzip program sucks ass and you need to use another application to unzip the hardspl software.

crazigamer said:
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
Click to expand...
Click to collapse
Did you go through the connection settings in the mobile device manager and disable usb connections?

Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
This advice is thanks to tochill. Try this and see if it works. Vista often does not automatically load the drivers. I used Vista 64 to flash without a problem. It was a little tricky to get it to load the drivers at first but after they are loaded you should be fine. If it doesn't work let me know and I will see if I can find the drivers for it.

Also make sure you have the most updated version of Windows mobile device center.

not sure what to do
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol

update ur drivers if ur using vista
for me vista was a pain to flash so i just use my desktop which is xp and its happy flashing for me all the way...piece of cake now after u do it a few times

crazigamer said:
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
Click to expand...
Click to collapse
Before you connect your phone.

You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723

Even tried xp
I have even tried using XP I still get the same outcome my phone auto restarts after I tell it to run the program. What am I doing wrong? I am suppose to run the main file off of my PC not the phone correct? and just go trough the setup?
Can some one tell me how they did it step by step because I have followed the instructions on the HARDSPL main thread and it dose not work. And so I am correct this will work with the new ATT Tilt right?

tried all of that still dose not work any other vista run arounds? God i wish i still had my xp discs

Please feel free to message me on aim username is kl3pto really could use some help.

GSLEON3 said:
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Click to expand...
Click to collapse
Thanks that was a thread I was looking for to post to the OP as the next step. I have had to reinstall vista 5 times and each 5 times had to do something different to get it to work.

NP, I also suggest with Vista, you flash HardSPL via Jump. Don't flash ROM's or Radios with JumpSPL, but with the 1.93 SPL, I have tons more success using the Flash HardSPL method than the .exe

Nooob Q

Hello iam new to WM, and i have a question...
can i install PC software on my Phone? eq. Diablo 2, or Foobar, or anything else?
how can i do this? Ive tryied to do it via ActiveSync, but nothing happens, program is trying do install on c:, ive tryied to copy first to storagecard but i can only perform cut, copy or view properties ;/
please help its f*** abusing me :|
ps. ive got HTC raphael

MOD EDIT: MESSAGE PARTIALLY REMOVED, THIS IS A WARNING: PLACE NICE OR YOU WILL BE SENT ON A VACATION FROM XDA
But to answer your question directly, no, you can't install PC software on a WinMo device.

@emesbe
FIRST OF ALL FLAMING WILL NOT BE TOLERATED IN THE Q&A SECTION
@rossari0
no you cannot load programs designed for windows vista or windows xp on your ppc it is a differen operating system.
Some progams like the sims are available in a different version for your ppc. You will just need to do a search for what you are looking for. Here is a link to a freeware site to which you can download some apps for your phone (i can assure you though that diablo isn't on the list )

My apologies. It will not happen again.

oops. wrong post.

HTC SYnc Windows 2003 Drivers

Greets all,
Mod, Sorry if this is in the wrong place, please move if need be, I did a search cause I was having trouble installed the drivers for the HTC Sync for the android, and since I was able to manage to get it installed, I thought if anyone else wasnt able to or if it wasnt found yet, I got it working for the HD2 "Motoman234 EVO Carbon Remix" Android.
Now it shouldnt matter and should work on all Androids but had to throw that in there just in case.
This is for Windows 2003 server (Instructions), but should work on other OS's:
1) Download the newest HTC Sync: 3.0.5481.
2) Run the installer, it will load many things as a requirement.
3) 2 Installer will fail: Windows Media Runtime 11 & USB Drivers. On both it will ask you if you want to continue to install, say yes.
4)Once installed, connect your phone, Windows will locate it and say new hardware found "ADB" Do not allow windows to search for the driverss, it wont find them, instead download the file from my post: http://forum.xda-developers.com/showpost.php?p=9719661&postcount=2
5)Unzip the folder, and make windows look in that folder, it might ask you if you should install it, say yes, once installed, your HTC Sync is fully functional to sync whatever you want.
Hope this helps anyone having trouble with Windows 2003, or any other version. And if this was solved already, my apologies, just trying to help.

I've been looking for 2003 drivers ever since I got my HTC Desire back in March. Will give this a go later and see how I get on.

I can confirm that the above procedure works fine. Many thanks

thanks you very much

good, I try and success!
good! I try and success. thanks a lot!

My pleasure, glad to be of help

You are amaizing,,,,, thank you very much... You saved me from installing new o/s
thank you once again