Even though WiFi is up and running, my phone keeps getting connected via GPRS automatically. Although most programs use the WiFi connection, sometimes they switch over to GPRS. Also, when I reboot the phone, WiFi gets deactivated and GPRS kicks in automatically. Of course, this is a bad thing since my carrier allows only 1MB of downstream on GPRS.
The other problem is that WiFi keeps getting disconnected after a period of inactivity. Now I don't mind this happening as it saves battery, but I don't want this to happen when I'm at a place having access to a power source. Strictly speaking, I could live with the WiFi getting disconnected, but the irritating thing is that sometimes it just doesn't reconnect - instead, a baloon pops up informing me of all other wireless networks available - my network isn't listed! Then after a few more minutes, it automagically connects to my network. Sometimes, to get the wifi to connect, all I have to do is click on the "G" icon (I'm about to open the wireless manager) and the WiFi starts to connect! Just w.t.h is going on here? :S
Now the common "solution" for the GPRS problem that's floating around the net is to use a program that disables the GPRS connection, like Modaco NoData or such, but I'm looking for a more permanent solution (regtweak?) by which:
1) GPRS is never connected and if connected, never used by any program IF there's an active WiFi connection
2) When the phone (re)boots, WiFi should be activated and if any "known" networks are found, should connect to it automatically, else it should be deactivated
3) Perhaps WiFi/GPRS can be enabled/disabled based on the cellid/GPS and/or time schedules? Now I know of programs that can do this, but I'm looking for something extremly light, preferably which doesn't have a GUI and/or runs as a service and can be configured by xml/ini/reg (or maybe have a seperate GUI for settings)
Any ideas people?
Thanks for your time.
Did you ever find a solution for this? I'm in the same boat and would like to know as well. Thx.
Yeah, I changed phones. Didn't face this issue on a Diamond and a Hermes.
got the same problem with my tg01 keeps dropping wifi and keeps connecting to gprs when wifi is on
Hello This guide is made up from the knowledge i have build up from advice given on XDA and information on other sites.
I have found this very useful in my home and hope you do to.
First off, this guide explains everything you need to do to use your diamond as the access point to the internet at home for all devices. (PC's, PS3, XBOX360, Wii)
It is highly recommended that you have a unlimited data allowance!!!!! Otherwise you could have a hefty bill at the end of the month.
Right what you will need :
A WM6.1 Device (I used a Diamond) with an unlimited data allowance tariff,
A WiFi router (i have used an old router that was installed with Tiscali BB)
WMWifiRouter version 0.80 (please find this your self i will not provide it)
and some basic knowledge of networking on PC's and your devices.
Thats it. Please don't be put off by the networking side of things its really easy to do.
Right first off we need to get your diamond taking to your router.
switch on your router and let it do its thing for 2-4 mins
Connect your diamond to the wifi router by switching on your wifi in settings, communications on touchflow, when prompted, connect to your router and enter your network key.
THIS IS THE SAME PROCESS AS CONNECTING TO A WIFI HOTSPOT.
Its that simple.
Next switch off your wifi in settings, communications.
Install WMWifiRouter version 0.80 (Simple and stable)
once installed open WMWifiRouter and press connect.
This should then setup your phone to be used as a access point and connect to your wireless network all at once.
Once it says connected you can turn off your phones main screen by pressing the off switch at the top and put your phone where there is best signal! HSDPA is needed to get up 7.2mbps (little H in signal area)
Right now you need to setup your laptop or device to talk to the phone via your router!
So here are the settings you need to setup in either TCP/IP (manual connection) or a manual connection on your device (PS3, Wii, XBOX360).
I will use a laptops connection as a example because all you need to do is to copy the settings to another device using a different IP address.
If you use wifi or a hardwired connection, right click the telly with the wifi connection in the bottom right of the screen and click open network connections (XP only dont know for vista), Or if the telly is not displayed in the bottom righthand cornner of the task bar then click start, control panel, network connections.
Click on the connection you wish to use i.e local area connection or wireless network connection (you can setup both connections by repeating these steps on each connection)
this should bring up a general tab of this connection, click properties.
This will bring up another box with the network properties, all you need to do is manually enter your IP settings and DNS settings so double click on "internet protocol [TCP/IP]"
Another box appears.
Click "use the following IP address"
In IP address type "192.168.0.xxx" xxx being the unique 3 digit code of your choice, write this down for your firewall settings on other devices if you run a networked drive etc. Each new device will need its own unique 3 digit code ie PC = 192.168.0.100, XBOX360 = 192.168.0.200, Wii = 192.168.0.123 etc.
In Subnet mask type "255.255.255.0"
In Default gate way type "192.168.0.1
Now click "Use the following DNS server address"
In preferred DNS server type "192.168.0.1"
Thats it, press ok and ok on any other boxes still left open.
Your network device will rest your IP and DNS settings to the ones you have just entered, thus allowing you computer to access the mobiles phones internet connection via your router
On all your devices Manually setup all your connections using these settings and they will all use your mobile phone to connect to the internet.
Using DHCP to configure your network is not advised as its unreliable at finding your phones connection.
Now if you want to start using your phone as a phone again, open up WMWifiRouter again if its not already and click options Quit.
To get internet access on other devices via your phone again all you need to do is to start WMWifiRouter and press connect. Start using the internet!!!
If you wish to use your laptop on another hotspot, you will need to reset the TCP/IP settings back to automatic, otherwise it will not work.
Using this process sometimes causes the phone to disable its own internet connection, so a soft reset after exiting WMWifiRouter is recommended.
Have fun, im sorry if its all a little messy but i have never been very good at writing these guides.
If any modd wants to add or edit this post then please feel free. any persons wanting to add to this guide please do so.
Yes i know you can connect your phone to your laptop by USB, Bluetooth, but this method allows multiple devices to use the same phone to access the internet at the same time and via a access point at the highest possible speed, so games consoles can use it!!! Brilliant if you get a good HSDPA signal and live in the country.
Oh one last thing! if you are a youngster and wish to try this, please do so on other equipment, don't use your family's main router and laptop or PC unless its no longer in use!!!
Thank You
Hello. I am having a Sony Ericsson Xperia X1 WM6.1 Device. Recently, I've tried internet sharing via USB and it doesn't seem to work. My idea is to be able to have internet connection on my phone via USB that connects to my main computer that has ADSL connection.
After pressing 'Connect' is successfully connects but any internet usage I've made is via my EDGE connection, not ADSL.
According to Windows Vista Internet Sharing Center, my phone's network access is 'Local only' as apposed to my normal LAN connection which is 'Local and Internet'.
I've searched for a solution and I came to this http://support.microsoft.com/kb/928233 but it still does not work.
Apart from the problem of Internet Sharing, my WMWifiRouter can't seem to work also.
As far as I know, WMWifiRouter will need to have Internet Sharing to work first, so it's normal that it is not working. However, I found a rather interesting message whenever I connect the 'USB to WiFi' mode. A pop up box with the tile 'Pocket PC Networking' will say ' cannot obtain a server assigned ip address. try again later or enter an ip address in network settings'.
Can anyone share with me the proper IP address for WMWifiRouter on my PC and on my WM device?
Anyway, just to describe the problem I'm facing when I'm using WMWifiRouter.
1. I connect 'USB to WiFi', everything seems to work fine, the status is ready.
2. I can see my own network name on my laptop.
3. I click on it, and the message shows connected.
4. Tried to access the internet but it won't work.
So, the main problem now is...
1. There's something wrong with Vista causing any device that wants Internet Sharing to only connect to 'Local'
2. There's something wrong with my IP configuration.
Thank you all very, very much in advance for helping me out.
unless chainfire beats you to it and posts the answer here.. you can PM him
Alright, thank you very much for your suggestion!
I apologize if this has already been addressed. I looked, but couldn't find anything.
Here's my problem. I have a Tilt 8925 and WMWifi Router. My internet sharing connection settings are through Media Net. I have used this connection method for many months. Well, today, I connected my laptop through the WMWifirouter and everything was fine for about 5 minutes. Then my connection was lost, and upon trying to re-establish my connection, I notice that the internet sharing connection is trying to connect through AT&T ISP or something like that. I have repeatedly tried to switch it back to Media Net, but it keeps kicking back to the ISP setting. I have no way of connecting through ISP so, what happened and how do I fix it?
Thanks in advance!
Not sure if this is related or not. I never really paid attention to these settings before, so I can't say. If I look under the wi-fi connections settings tab on my phone, it brings up Configure Network Adapters. It is set to Virtual Ethernet Intermediate Miniport.......under that there are a whole bunch of other things. If I try to change it to IEEE 802.11b/g Compatible Wi-Fi Ad......, it appears as if it accepts the changes, bbut I then go immediately back into the settings and it is back on the virtual ethernet setting. Shouldn't I be able to change it, and could this possibly be why I can no longer connect using the WMWifiRouter?
Any help at all, please???!!!!
Even just a response of I'm not sure is better than no response at all.
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Hi Pirate
it's a bit depending on the ROM you have installed - but since Android 4 you have a quite reliable setting. The default behavior of Android devices is to deactivate the wifi connection when it goes to sleep.
Some ROMs don't recognize the disconnection and the switch/button still shows "Wifi on" although disconnected.
First step: go to settings / wifi settings, hit the menu button (top right three dots) and check the advanced settings.
Somewhat like "Keep WLAN active in standby" - set this to always.
That should solve it already under android 4.x
If this doesn't help, look into Play Store - search for "wifi keep alive". But for the SGT 2 you shouldn't need it
Greetz - Chris
It was already set to "Always" so I don't think that will help. I will look at that app to see what it does.
Sent from my Nexus 7 using Tapatalk HD
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
guncrasher said:
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
Click to expand...
Click to collapse
The problem is that it never comes back on. Well it shows the wifi icon and the signal and everything but it just doesn't have any data connection. Any apps that use data act like wifi is off. The only way to get it to start working again is to toggle wifi or reboot. I also forgot to mention it is the stock ROM, only rooted. It got the OTA a few days ago too and it has happened since then.
You're not alone
Skurvy_Pirate said:
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Click to expand...
Click to collapse
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
I know this isn't super helpful but I had the same bug you describe on the previous version of carbon. When I updated to the latest it seems to have stopped.
Sent from my GT-p5113 using xda premium
I had similar issue with my aTab Phone 4 and TP-Link TL-WR941ND (OpenWRT)
After disabling WMM capability in the router the problem disappeared!
Change router lease time to "2weeks"
Sent from my GT-I8190N using XDA Premium 4 mobile app
Same issue.
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
Same issue. also using connectify and also tried all things you have described. If you find any solution please let me know.
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
No option for static IP in connectify
jopsinas said:
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
Click to expand...
Click to collapse
There is no option in connectify for static IP and in USB wifi dongle also there is no option to set static IP.
Help!
---
---
Same issue
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
1. I have had the exact same issue for (atleast) the past 2 years. Have survived by repeatedly turning wifi on and off.
2. I too use connectify. This issue doesnt seem to happen on every wifi connection (just like your case). Even more specifically, it seems to happen ONLY when I connect my phone to the hotspot created via my laptop (connectify).
3. Even when the internet is actually working, some apps do not seem to recognise that(take some time to realize it is working), while others are able to connect instantly. Specifially, whatsapp is unable to send/receive messages for about 1-2 mins, after which I receive a whole bunch of messages at once.
This does not seem to be an issue due to connectify as well. I have tried creating a hotspot from my laptop without using connectify as well, but unfortunately, nothing changed. Further, this does not happen when my phone connects to a hotspot created via connectify by some other pc. The wifi and internet work perfectly fine when connected to a hotspot created via my friends computer.
Further, this problem happens only when a mobile connects to the hotspot. Doesn't occur when another laptop/PC connects (not sure about tablets).
I have looked into every nook and cranny on the internet, explored every forum for any working solution, but have been unsuccessful. In fact, this is the first place where I saw the exact same problem as mine, and was wondering if you have found any solution to it .
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
I'm having the exact same prob on my ZTE Grand x V 970
It started when i had kitkat and i couldnt even "fix it" restarting the wifi, i had to reset the phone in order to have my wifi work for like 2-5 mins and then stops recieving data, tried to reconnect and stays on turning on wifi.. Now i changed to the stock Rom and the problem is still there but at least now i can "fix it" restarting the wifi connection until certain point.
Issue sharing internet with Connectify from PC
Go to:
Control Panel\Network and Internet\Network and Sharing Center
On the left column, click on CHANGE ADAPTER SETTINGS.
You should be in: Control Panel\Network and Internet\Network Connections by now.
Then click on: Microsoft Virtual Miniport Adapter and click on Properties, then click on the 'Configure' button in the 'Networking' tab. From this window, go to the 'Power Management' tab and uncheck 'Allow the computer to turn off this device to save power'.
This works for me. Try this out
If this doesn't work further, you can try out mHotspot for the same purpose.
I've had the same issue, with the wifi saying it's connected even though it isn't.
This thread is 4 years old and this issue still hasn't been fixed. What a shame.
Same issue here on OnePlus 3 even after factory reset.
I have this same problem after the security patch Mid March to Jan 1, 2019. The WIFI doesn't show in the top status bar, but toggling wifi off/on fixes it till the next overnight. I did make one change to my wireless about that same time and that was moving the min connect speed from 6Mbps to 12Mbps to help with bandwidth issues being cause by devices using low speeds and having several SSID broadcast. My S7 and Tab A both work fine - so I think it was something in the security patch.