Database Info

My Himalaya not responding after sometime I turn it off

I flash the my hima with the TofClock 2.01a32WWE ROM, and it works fine, and I'm very glad with it.
But now, some time I turn off my hima by pressing the power button, the screen went black, after a while, I want to light it to operate, the hima keeping black, and the hima cannot operate any more, and I tried to call my phone(hima), the hima didn't ringing. Also, SMS, MMS, all function dead. But the same time, the 2 leds, Blue and Green/Red, flash like normal.
At this time, the only way to operate hima normally was soft-reset it by press the hole with my pen.
:shock: :shock: :shock: :shock:
Is there someone experience this situation, and is there some way to solve the problem.
:idea: :idea:
ps: in the Settings --> System --> Power --> Advanced page, the 2 options can set "Turn off device if not used for" some minutes, when "turn off" time out, the same problem occurs like above, I called it Auto Turn Off
My device is Dopod 696 (Maybe Chinese mainland version of O2 XDA II).
:wink: :wink:

I also experienced similar problems, but with the 64 version.
After a while, when I tried to turn it back on, it began to act strange. First the automatic turn off backlight option was every time reset to 10 sec and then after a day or 2 I noticed that the screen was sometimes still showing some black lines. Changing the volume still gave the corresponding sounds, but nothing else seemed to work (or wasn't visible). Normal operating mode was only reinstated after a soft-reset.
I gave it a hard reset and restored a backup (using SPB). It's operating again, but it already contains the 10 sec change.
So probably have to start clean again and install everything from the beginning, but before I do I would like to make sure it will not happen again.
Appears like the Power Off option is screwed, no matter in which way I use it (button or a program).
Anyone have any thoughts on it?

zplei
yes, i have same problem on my O2 XDA ATOM
with last rom and other

I have the same problem too, the only ay to have it back is softreset

i was using spb to toggle display mode.

someone said can be solve by reegedit. but how to.

anyone found a solution..?

How do I REALLY turn my xda exec "OFF"

Excuse me I'm almost suicidal.
I hold the two keys down that bring up the hardware control panel, I turn off the mobile phone, bluetooth, wifi, and activesync, I open the task manager and stop any active processes, I turn my xda off (at least I think I do) and BEHOLD in just a few short minutes the stinking thing turns itself back on again, and stays on.
My PC informs me it has an activesync connection yet my hardware panel says its turned off, I try move some files around and sure enough I can gain access to my memory card, I run task manager and despite the hardware panel telling me activesync is not working the task manager knows different.
Not only has activestink decided its gonna work even though I've told it not to I HAVE AN INTERNET CONNECTION! , talk about a security risk.
WTF is in control of this pile of junk, me or the hardware/software.
Please tell me there is a fix for this, when I turn something off I expect it to stay turned off (completely) until I turn it back on again.
Now if you don't mind I'm going to lay down and have a nervous break down.

Dude you really need to chill.
These things do require some potions .
I do not know the exec in person but all HTC and most other WM 5 devices shut down completely when you hold the "standby" button for 10 seconds or more. (On the exec i believe it is a small round metal color button on one of the sides.)

levenum said:
Dude you really need to chill.
These things do require some potions .
I do not know the exec in person but all HTC and most other WM 5 devices shut down completely when you hold the "standby" button for 10 seconds or more. (On the exec i believe it is a small round metal color button on one of the sides.)
Click to expand...
Click to collapse
Hi'
Been there, pressed that, still turns itself back on, even tried a factory reset and it still does it.
Probably micro$oft being insane again.

Perhaps buying a device with a Microsoft OS was not the right choice if you think they are insane?
The Universal doesn't have the full off feature as some other devices do, and if you use pushmail solutions, it will sometimes turn itself on if you have the screen open.
It also does this on a few other devices.
Using the device lock option on the doday screen prevents the problem, there may be other fixes by now, but that, or closing the screen are the simplest.
Some other today plugins, I forget the name, will give you an auto lock option when you press the power.
That said though, I use pushmail, and mine doesn't come on that I have noticed, but my Wizard does unless I lock it.

Screen does not go off....

not sure why but as soon as the timer for the screen kicks in it turns right back on.....anyone have suggestions?
Unlocked ATT 750 with ATT leaked WM6.

It is something to do with the brightness setting. Put it 40% or more.

Hello
I've got a Treo 750v with the latest WM6 installed and I'm getting the same problem too. I've got it set so that after 2 minutes, it turns off, but instead of doing so, the password screen comes on and stays lit till I put it to standby manually!
The other problem is, I've got mine to auto connect and check for messages via GPRS, and whenever it does this, the screen turns on and never turns off again.
I've had to turn this feature off else when I wake up, in the morning or even during the day when I'm at work, I find that this kills the battery!
Any ideas?
Thanks
D.C

I ocasionally have the same problem, I do a soft-reset when it happens.
I couldn't reproduce the problem, but when it happens again I'll investigate the brightness setting...

It really is the brightness-setting...
Isn't that redicioulus?

How to turn Backlight OFF

Hello,
i am using my touch cruise (or better o2 xda orbit 2) for navigating on my bike.
I use it in my pocket, only listening. After some research and testing i found a way to use tomtom with locked screen.
I now want to turn the backlight off because of power consumption. But when locked the backlight is only turned to minimum, not off. How can i turn off the backlight completely ?
I tried several tools which turns the whole display off. This works fine with all applications except tomtom, i dont know why but as soon as the display is switched off tomtom stops.
So i want to turn at least the backlight completely off, but how can i do that?

remoh said:
Hello,
i am using my touch cruise (or better o2 xda orbit 2) for navigating on my bike.
I use it in my pocket, only listening. After some research and testing i found a way to use tomtom with locked screen.
I now want to turn the backlight off because of power consumption. But when locked the backlight is only turned to minimum, not off. How can i turn off the backlight completely ?
I tried several tools which turns the whole display off. This works fine with all applications except tomtom, i dont know why but as soon as the display is switched off tomtom stops.
So i want to turn at least the backlight completely off, but how can i do that?
Click to expand...
Click to collapse
With my older pocketpc's and pocketphone's the backlight could be turned down with pressing the power button for a longer period.
I told it was about 3 sec holding te powerbutton and the backlight stops.
But with the HTC TC i din't tried it yet..and my device is now at the repair centre..so you have to try it.
But when the backlight is down..you don't see a think when ther is enough sun light..so why do you want that..buy a usb car powerplug and you can charge it and use it with full light on!

Does not work (3sec pwr button)
I dont need to see anything on the screen. it will be in my pocket while navigating so theres no need for backlight.
And a car charger on the motorbike - that would need a socket to plug it in.

remoh said:
Does not work (3sec pwr button)
I dont need to see anything on the screen. it will be in my pocket while navigating so theres no need for backlight.
And a car charger on the motorbike - that would need a socket to plug it in.
Click to expand...
Click to collapse
Strange with my device it works.
But you can try this software: http://ppcsoft.narod.ru/english/
TDO

TDO said:
Strange with my device it works.
But you can try this software: http://ppcsoft.narod.ru/english/
TDO
Click to expand...
Click to collapse
Thanks, i already tried it before. As soon as the screen gets black TomTom stops.
It says it turns the backlight off but as far as i can see it disables the whole screen. And as soon as this happens the f***ing TomTom stops the Navigation.
If i press the pwr button for 3 sec the device asks me if i want to turn it off.

remoh said:
After some research and testing i found a way to use tomtom with locked screen.
I now want to turn the backlight off because of power consumption.
Click to expand...
Click to collapse
Hi remoh, I'm having the same problem. Have you found a solution for disabling the backlight by now?
How did you manage to lock the screen and keep TomTom navigating?

Let me get this straight... do you want to turn the screen off (i.e. lock it) or just turn off the backlight (in which case the screen remains active)?
For the second case there should be some options for it in TomTom, but it's primarily for in-car use. (never used TomTom before, it's crap for my country... i'm just basing on iGO)

gnick666 said:
Let me get this straight... do you want to turn the screen off (i.e. lock it) or just turn off the backlight (in which case the screen remains active)?
For the second case there should be some options for it in TomTom, but it's primarily for in-car use. (never used TomTom before, it's crap for my country... i'm just basing on iGO)
Click to expand...
Click to collapse
Being able to turning the screen off would be great but just being able to turn off the backlight would be fine also. Tomtom doesn't have an option for this afaik.

Now, thats the second reason i won't use TomTom... if the first wasn't enough
Not even power saving options?

ATT Fuze backlight issue

Hi All,
I have a (strange?) problem with the screen backlight - dont know if this is a feature or a bug? I have the "Auto adjust backlight" checked on (by default). While I connect to my pc (via usb) during autosynch, the screen dims after a certain time - which is good, but the screen backlight does not brighten up when I start using the phone (the phone still being connected to pc via usb). The screen brightens up if I click the power button off and then on but this disconnects the autosynch and reconnect.
Am I missing something?
P.S, I have installed "Autoconfig" and "Diamond Tweak" both, but have not configured anything from there.
Thanks,
pkshr

Any suggestions ....

be patient... people will eventually help you
In the mean time why don't you just turn off auto backlight ?

Hi abc12345,
I am noticing this issue not only during syncing but even when using the phone too. If I use the phone for few minutes the backlight automatically dims even I am still using the phone.
Sorry if this seems a stupid question but why does the power button turn off and on brightens the screen if it has to dim after a while? Is this an expected behaviour? Is unchecking "Auto backlight" the only issue for this?

Is this problem only with my fuze ??

pkshr said:
Is this problem only with my fuze ??
Click to expand...
Click to collapse
I have the problem too

Just waiting for a solution..it used to fine with my phone until i installed ThrottleLock0.4.. then the same things happened..i would auto sync my phone and when i would push the power button ..it disconnects the autosync..

same issue here