When I try installing .NET Compact Framework, it just wont let me.
It says "Microsoft .NET Compact Framework could not be installed".
I've tried it over and over, even deleting all of the registery files in Local Machine > Software > Microsoft > .NETCompactFramework.
which version?
3.5 in WM6.5
was happening to me, think its cause the download on the ms site is an .exe search for it on here and download the .cab file instead, worked for me...
paulking said:
was happening to me, think its cause the download on the ms site is an .exe search for it on here and download the .cab file instead, worked for me...
Click to expand...
Click to collapse
The .cab file didnt do anything for me. Still cannot run programs which need CF 3.5
http://pocketnow.com/how-to/tutorial-how-to-upgrade-to-microsoft-net-compact-framework-35
tnyynt said:
http://pocketnow.com/how-to/tutorial-how-to-upgrade-to-microsoft-net-compact-framework-35
Click to expand...
Click to collapse
I was able to install it this time. But still cant run programs like FingeryKeyboard.
Does anyone know whats wrong?
Related
Hi there,
I am Using the windows mobile crossbow version at the moment.... I must say with a few adjustments like splashscreens, Batteryindicator it is almost the perfect rom... Its to bad that i only have 7 options in my ComManager.. Think i'm missinig a few things...
Is there a possibility that the wm6 crossbow version can be modified so it will have the same ComManager options as the NDB WWE rom????
If anyone knows anything... or knows if this would be possible....???
thanks for the reply's
Try this...
http://forum.xda-developers.com/showthread.php?t=301580
Thanks allot will try that...
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Drakesilver said:
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Click to expand...
Click to collapse
I have a G3, so perhaps that makes a difference?
Drakesilver said:
Hi there...
Tried to install the cab file, but get the message: "Installation was unsuccesfull. The Program or setting cannot be installed because it does not have the sufficient system permissions."
Do you have any idea?
Click to expand...
Click to collapse
Where is the cab file before you try and run it, cus i find sometimes that if i have it on my sd card it doesnot like it, and i have to copy to main part. But then sometime if i replace the cab file it will work from the card!!! It has a mind of its own.
As in the title, how do I install the Advanced Config Tool?
Download the CAB from Schapps website.
Download .NET as mentioned on the website, link is also there.
Install .NET on PC and PDA.
Install Advanced Config.
Off you go!
Yeah im having difficuly as well.
I have installed the cab but when trying to run the app it says i require .NEt, doesn't tell me what version or where to get it though?
Cheers
install Compact .NET Framework 3.5 on your PC with phone connected..it will automatically transfer installer to your phone..continue on phone, install framework and it should work
How do you install the framework on the device?
I wrote it allready ...connect your phone via USB, download framework to your PC, run it..it will extract in PC and copy setup files to your HTC...after that, you will continue on phone..like every other installation.. (is it good English? )
Hey.
In reference to this: http://support.microsoft.com/kb/975281
Where is the file? I am in great need of this, and really cannot figure out what M$ wants me to do to get it.
Any help would be appreciated.
cab files are run on the pda
No, I need to get the hotfixed .NET CF cab file and install it onto the device.
I can't seem to find the cab installer that is listed in the table.
EDIT: (I need to download the fixed cab file, basically, so I can install it on my device)
Jaxbot said:
No, I need to get the hotfixed .NET CF cab file and install it onto the device.
I can't seem to find the cab installer that is listed in the table.
EDIT: (I need to download the fixed cab file, basically, so I can install it on my device)
Click to expand...
Click to collapse
Try this, I am pretty sure this is the file
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
http://www.megaupload.com/?d=2ZGV1DNJ
Google Search had results in 2 seconds
Thanks, I'll try those two and see if they work.
@cmstackar: Hehe, yeah, I'm never really sure which website will hit me with malware or not.
Neither one seemed to fix the problem (nor was exactly the size listed on the KB article), nor did about 4 others I dl'd and tried.
If anyone has a better way of solving this problem, let me know.
I really would like to be able to use embeded Pocket IE objects again...
I think they just dropped in a fix into the existing package, no version/name changes. I too am looking for this. The article indicates that the file is available but it's actually not!?
If anyone is still looking for this fix, you can request it here:
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=975281&kbln=en-us
You'll get a download link immediately (it worked for me, anyway).
Hi everybody? I am trying to find a solution to a issue with sasimi on the new 6.5.X roms (with the start button on the lower bar). The issue is that sashimi cant install cabs to storage card. I searched the web and foud some ideas that u need to hack the sashimi.mrsc file but none of them was working.
Can anybody who succeeded in runing sashimi post his workoround? That would really help me. Thanks ion advance.
Nobody here uses sashimi?
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Man, I love you, thanks.
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
dagrim1 said:
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
Click to expand...
Click to collapse
no it will not working with 6.5, first backup SASHIMI.mscr original first for using later with 6.5
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
steveianson said:
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
Click to expand...
Click to collapse
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I'm so glad that it works again...
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Me too
It seems that the "SendSpecial ("Down")" is not working and the script may be hanging on the command, or something like that. You don't see the selection change, so it could also be the "SendSpecial("Space")" not working. Either way, the "SendSpecial("LeftSoft")" just after is obviously not firing. Not sure why it's different now, but it apparently is. There used to be a "SendSpecial("CR")" instead of the "SendSpecial("Space")", so I'll try that to see if it's working again (worked in win6.1, not in win6.5). Mine's been working just fine, up till the very latest Energy ROM on my CDMA TP2.
LightC said:
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Click to expand...
Click to collapse
I think it connected to the roms u are using. For me it worked with one rom, then I flashed other rom and I experencied the same thing as you.
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
secoseco said:
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
Click to expand...
Click to collapse
dingolino said:
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
Click to expand...
Click to collapse
You're right there off course
I am having no luck with the v8.0 of Sashimi. I have the Artemis ROM (WinMo v. 6.5.5).
Auto mode only installs cabs from cab/ASL folder. I replaced the Sashimi.mscr with the one posted in this thread but to no avail.
Do you guys have any suggestions?
me too,
sashimi doesnt install (not works) for new artemis v7. It install all my cabs from auto/SC to device becasue it can not move cursore down anymore..
any suggestions?
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
I'm surprised that either of the attachments on this thread works on HD2 Leo. I found that there is a very basic problem with mortscript and all sashimi scripts will hang. Two symptoms:
1) if not in flight mode, sometimes hangs during initialisation
2) if auto install to storage card, will hang (leaving you to select the radio button and press install)
and there is no easy cure.
padlad said:
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
Click to expand...
Click to collapse
thx m8,
i will try it
i'm on wm 6.5.x and sashimi stalls at SASHIMI INITIALIZATION COMPLETE.... HEEEEELP!
In order to see what version is installed use File Explorer to navigate to the
\Windows directory on the device, and click the file called "CGACUTIL". You will
get a message box showing you the Win32 File Version of the .NET Compact
Framework installed on the device.
download and install the CAB file from the attachments
Please click on Thanks
ghost_j1
wats the latest version of dotnet framework
i found framework4.0 for win pc .. is that the same for windows mobile also???
shinesudhakaran said:
i found framework4.0 for win pc .. is that the same for windows mobile also???
Click to expand...
Click to collapse
i have no idea man but i dont think so
4.0 investigation
shinesudhakaran said:
i found framework4.0 for win pc .. is that the same for windows mobile also???
Click to expand...
Click to collapse
ok. i wanted to throw my two cents in on this. i went in to my box's program files to find my install or .cab for WM .NET 3.5 Framework.
"C:\Program Files\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE"
was the location.
NETCFv35.wm.armv4i.cab ...
Now under this same directory i also have
NETCFv35.ppc.armv4.cab
NETCFv35.wce.mipsii.cab
NETCFv35.wce.sh4.cab
NETCFv35.wce.armv4.cab
NETCFv35.wce.mipsiv.cab
NETCFv35.wce.x86.cab
that all said. i will grab the newest download for 4 and post my findings.
------------------------------------------------------------------------------------------------------------------------------------
Ok, i installed the 4.0 package from microsoft. checked the program files and ran a search on my box for all .cabs. seeing if it squirreled them away. no dice though.
let me know if you guys find anything on a windows mobile version of the 4.0 Framework.
How I solved .net 3.5
It took me 2 days to figure this one out. Finally i found a thread that said to install .net 2.0.
Follow this link. Install 2.0 http://www.microsoft.com/downloads/...6b-356b-4a2c-857c-e62f50ae9a55&displayLang=en
Once you have done this then follow this link and look for 3.5.
http://forum.xda-developers.com/showthread.php?t=633590
This is were I got 3.5 from.
Congratulations 3.5 is installed.
thank you!
I cant install .net 3.5 for a long time. I had an error while installing it. Then I installed .net 3.7 and all problems gone.
thank you so much. i needed but didnt install this from .exe, because my phone's memory was not enogh.
thanks again
ghost_j1 said:
In order to see what version is installed use File Explorer to navigate to the
\Windows directory on the device, and click the file called "CGACUTIL". You will
get a message box showing you the Win32 File Version of the .NET Compact
Framework installed on the device.
download and install the CAB file from the attachments
ghost_j1
Click to expand...
Click to collapse
thanks a lot.
Powertoys and exception messages
I installed NETCFv35.wm.armv4i.cab from the (full redistributable package) .NET Framework 3.5 (page down a bit to find the full version package).
Then I also installed;
Power Toys for .NET Compact Framework 3.5
&
NETCFv35.Messages.EN.wm.cab ; exception messages
Read more about the powertoys outside xda-developers here on modaco.com
Hope this helps,
Senax
Senax said:
I installed NETCFv35.wm.armv4i.cab from the (full redistributable package) .NET Framework 3.5 (page down a bit to find the full version package).
Then I also installed;
Power Toys for .NET Compact Framework 3.5
&
NETCFv35.Messages.EN.wm.cab ; exception messages
Read more about the powertoys outside xda-developers here on modaco.com
Hope this helps,
Senax
Click to expand...
Click to collapse
Thanks Senax for these info .
ghost_j1 said:
In order to see what version is installed use File Explorer to navigate to the
\Windows directory on the device, and click the file called "CGACUTIL". You will
get a message box showing you the Win32 File Version of the .NET Compact
Framework installed on the device.
download and install the CAB file from the attachments
Please click on Thanks
ghost_j1
Click to expand...
Click to collapse
Thanx Dudness, Where have you been All My Life Q;~))
thanks...a lot..