Database Info

Free StealthGuards! (Invisible shields)

Just saw this offer and wanted to share it, free protectors at**LInk removed - advertising a commercial site*** I don't know if they are any good, but they only charge transport costs for now

Thanks for the info!!

Nice one! just placed the order and will receive it in a few days
thanks for the heads up!

A few people at slickdeals.net that bought these last time said these were pretty crap!

sactoguy said:
A few people at slickdeals.net that bought these last time said these were pretty crap!
Click to expand...
Click to collapse
Well they are free. (Sort-of)

There is another thread running about these.
Long story short, not very good and have now removed the shield after less than a week.

the shield works well for me and the cutting is pretty accurate.
just gotta spray lots of water during application and everything will come out quite nicely. Im intending to get another spare one as Ive heard that such shield will become yellowish after some time.
overall, im impressed with wat ive received given the amount of money ive spent

I've ordered one of these sunday just past hope it comes soon

Mine arrived. I got 2 sets as figured I'd mess some up first time.
First impressions:
Never used invisible shield type products before. The pieces are very accurately shaped, but not completely cut, which made separating them from the surround quite hard. I found best method was to separate each individual section by roughly cutting around it leaving excess on all 4 sides, then apply to phone, and use the excess to move it around to avoid fingerprints on the sections.
A strong pull stripped off the excess of the vinyl, and also made them fit very snuggly. This works particularly well on the curved back - which I suggest you fit first.
I put them on dry and found they went on fine. Some tiny bubbles which went away after a day.
The screen protector I found impossible to get on without larger bubbles - I tried wet and dry. The texture's not very nice either so suggest you use some of the excellent ebay cheapo screen protectors. Buy lots if you're fussy about bubbles like I am.
All the cut pieces are a very neat fit. Once on, your phone becomes very shiny, and very grippy. The raised edges of the pieces, particularly on the sides, can be felt. It doesn't look as nice as a bare phone, but it's functional.

Mine arrived last week.
I had a lot of problems installing them. I was left with a very wet table, a lot of used paper towels and a few dusty stealth guards. Maybe I can find enough courage to try it again later. But at the moment I'm too frustrated with them
I also was quite surprised by the size of the bubbles. As you said, the cheap eBay protectors don't have that kind of bubbles. I must admit I didn't wait the recommended 24h

Ronok said:
I must admit I didn't wait the recommended 24h
Click to expand...
Click to collapse
it makes a lot of difference

sactoguy said:
A few people at slickdeals.net that bought these last time said these were pretty crap!
Click to expand...
Click to collapse
i can confirm...got one for Desire and one to Hd2...to dificult to apply, and they look too bad, seems you are grabbing a piece of plastic.
in my desire just kept the display protection, in my Hd2 im waiting for a friend to see an then remove that crap... i bought one from another brand for my Iphone, and it was easy to apply, it came with a thing to apply the protection and it was great.
Belive me , sometimes in my job i have to decorate cars and i got some experience in applying that...

Rubbish. Screen protector didn't go on easily at all and as I removed any bubbles on it, it just damaged the protector, leaving a mark! Hated the feeling when touching it as it has far too much resistance compared to the bare screen.
The actual body covers for it are utter tat! Makes the phone look like a cheap children's toy and fits badly!
£2.80 wasted on this, but at least it means I won't waste money on full price protectors!

Glad i bought a brando ultra clear
Sent from my HTC Desire using XDA App

jamiepyrite said:
Rubbish. Screen protector didn't go on easily at all and as I removed any bubbles on it, it just damaged the protector, leaving a mark! Hated the feeling when touching it as it has far too much resistance compared to the bare screen.
The actual body covers for it are utter tat! Makes the phone look like a cheap children's toy and fits badly!
£2.80 wasted on this, but at least it means I won't waste money on full price protectors!
Click to expand...
Click to collapse
Hmm, not good to hear.

dont get it. it's rubbish. Thick as hell. it's like putting a condom over your phone. looks and feel funny after you manage to get it on. Getting it on is a project by itself. also its super shinny and looks very plastic. save yourself the shipping cost.

Hmm, I <3 my Zagg InvisibleSHIELD, this would be a nice back up just incase my zagg lifetime warranty fails to renew. Have the people bashing this promo tried the official Zagg invisibleSHIELD? I wonder if it's the quality of the Stealth Guard, or the idea of having a plastic coating all around that's turning you off.
If the quality of the Stealth Guard is as good as the Zagg InvisibleSHIELD then I wouldn't mind paying the $3.00 shipping. But I'm getting the idea that the Stealth Guards are cheaper, and of poor quality when compared to the Zagg InvisibleSHIELD.

The bestskinsever ones look tempting. Apparently they're quiet decent and they only cost a bit more than StealthGuards.

So where is the solution that they show in the video? Is the solution just water? I checked out the FAQS on the Site but didn't find anything. My package just came in an envelope with the protectors and my invoice. Just curious if anyone knows how to apply them without the "solution" they say to use on their "Installation Instructions".
Thanks

Got mine in the mail yesterday. I need help applying it because I'm a spaz. Heh.

Steinheil screen protectors out now!

bigjuan86 said:
In case anyone is interested, sgpstore.com now has the ultra clear and anti fingerprint screen protector available to order.
Click to expand...
Click to collapse
Just placed my order! Guys these are the best protectors around... Here are links to the Ultra Clear and the Anti Glare. I've only used the Ultra Clear, I think it would be a crime to hide this beautiful screen with an anti glare... There is a new video on these pages showing install on a Galaxy S... you can literally install them this easily and then lift up with the stickers to remove any dust with another sticker if you get any. You get 2 per pack.
Ultra Clear:
http://www.sgpstore.com/product_info.php/cPath/23_29/products_id/1668
Anti Fingerprint
http://www.sgpstore.com/product_info.php/cPath/23_29/products_id/1669

Why did they give our phone that big gap at the top while the other models get that nice clean cut look?

CouchSpud said:
Why did they give our phone that big gap at the top while the other models get that nice clean cut look?
Click to expand...
Click to collapse
I'm assuming you mean the fact that the protector doesn't go all the way around the speaker bezel? That I'm sure, is to avoid issues with that tiny little bit of screen protector that would otherwise be there, failing to stick or lifting. The less cuts and tiny bits you have on a protector, the longer it will last, because it will be less prone to lift or stop sticking or catch on something.
I actually prefer that it doesn't go all the around for that reason. I'm having issues with my current protector (the stealth guards one) having that tiny bit slide around and not stick well, it looks like crap...
Also, you're not going not notice anyways once this thing is installed. It's exaggerated in the picture so you can see the what the screen protector looks like. Once it's installed, it's as clear as glass if you put it on well. You'll probably be hardpressed to even notice it's there except for the "lip".

Thanks!!!! Just placed my Ultra Clear order...yay!!! They are truly best ones out.

Protonus said:
I'm assuming you mean the fact that the protector doesn't go all the way around the speaker bezel? That I'm sure, is to avoid issues with that tiny little bit of screen protector that would otherwise be there, failing to stick or lifting. The less cuts and tiny bits you have on a protector, the longer it will last, because it will be less prone to lift or stop sticking or catch on something.
I actually prefer that it doesn't go all the around for that reason. I'm having issues with my current protector (the stealth guards one) having that tiny bit slide around and not stick well, it looks like crap...
Also, you're not going not notice anyways once this thing is installed. It's exaggerated in the picture so you can see the what the screen protector looks like. Once it's installed, it's as clear as glass if you put it on well. You'll probably be hardpressed to even notice it's there except for the "lip".
Click to expand...
Click to collapse
I ordered one regardless, but after reading a bit more into it, I get what you mean. My stealth guards cover isn't having that problem, but seeing how SGP doesn't use as much adhesive, I can see how it could end up looking crappy.

Finally! Now I'm just waiting for those cases they have for the other Galaxy S phones.

Ordered mine yesterday... Thank goodness, because they are already "temporarily out of stock" if you try and order one today...

I had this on my droid inc and loved it. I am stoked they are finally out for the fascinate. Now I can throw away the crappy verizon one.

anti fingerprint or ultra clear???? i dno what to get?!?!?!?!!?! helpppp
edit: the ultra clear is out of stock anti fingerprint it is.

wow they are fast. just got my shipment email

i'm going to order one but i dont like how firefox requires me to authorize web certificate .. doesn't seem so safe

Got mine already. I ordered it yesterday morning. It looks great to me.

Where the hell are all the good SGP cases!?

anyone comment on the quality of their silicon cases vs others?

Damn I want the crystal clear one, wonder when they will be back in stock.

Dhuss said:
Damn I want the crystal clear one, wonder when they will be back in stock.
Click to expand...
Click to collapse
never!! muahahahahah!!!! jk i want one too lol

I was going to get an Invisible Shield but it just looks so damn clear in that video it's amazing.
I like how they give you twp also considering my brother and I both have Fascinates.
Sent from my SCH-I500 using Tapatalk

I want one, was a day late reading this thread well gotta wait now.
Sent from my SCH-I500 using XDA App

Gone now. Removed from website???

What are the advantages of the ultra clear vs the anti fingerprint?
SGPstore.com is no longer showing these protectors but I found the anti fingerprint on amazon at the following link.
amazon.com/SGP-Steinheil-Anti-Fingerprint-Fascinate-Protector/dp/B00496NKKS/ref=sr_1_2?ie=UTF8&s=wireless&qid=1288554999&sr=8-2[/url]

Case mate release the Pop Case to DHD!

very competitive with otterbox, but with grat designing
https://www.case-mate.com/HTC-Desire-HD/Case-Mate-HTC-Desire-HD-Pop-Case.asp

Nice I need to order

Looks very nice indeed! Might have to get one too, to interchange with my Otterbox case.
Though ive got a slight worry that glossy black will scratch like a motherducker in no time.
If anyone gets one can you post some pictures and maybe a video too? Curious to see what that plastic is like. Cheers!

I was gonna go for a casemate tough, but I think I might wait for this, looks very nice.

Just pre-ordered one from here:
http://www.htcdirect.co.uk/index.php?main_page=product_info&cPath=2_12_80&products_id=978
Sent from my Desire HD using XDA App

the back looks great, but too chunky around the screen...

panyan said:
the back looks great, but too chunky around the screen...
Click to expand...
Click to collapse
agree but there is no alternative better

I ordered mine two days ago. It should be here tomorrow. I'll post a review then.

bobbyphoenix said:
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
Click to expand...
Click to collapse
Sounds great, be sure to take lots of pictures.

Results are in!
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.

bobbyphoenix said:
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
Click to expand...
Click to collapse
Does the edge of the camera lens protude from the case? Can't tell from the pictures.

PeatCoal said:
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
Click to expand...
Click to collapse
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).

bobbyphoenix said:
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
Click to expand...
Click to collapse
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.

PeatCoal said:
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
Click to expand...
Click to collapse
Well as luck would have it I have one of those on the way too. I'll do the same kind of review when that one comes in. Can you tell I love cases?

bobbyphoenix said:
Can you tell I love cases?
Click to expand...
Click to collapse
..nope
I look forward to it

Nice review ordered mine too just now.
Sent from my Desire HD using XDA App

So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....

psych0t1c said:
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
Click to expand...
Click to collapse
The shinny black part is very hard plastic, and since the very soft gray part is fused to it, it is really really hard to get in and out. I almost feel like if I push any harder I'm going to break one or the other, but the soft part is just soft enough to get it in there. I don't see how it could get easier over time. It's one of those cases that once it's on, it's on for a long long time. Compared to the OtterBox Commuter case that one seems like it can fall off, and the Pop case seems like it was actually made into the phone, and not to come off without a struggle, but if I had to make a choice I would pick the Pop case 100% of the time. Again if you compare them side by side the OtterBox looks like it was made for a kid to play with, and the Case-Mate one that you buy tickets to see it in a museum. It is that good!

Thanks a lot for the quick reply mate. I was thinking that maybe one could cut or file down one of the plastic ridges that snap into place around the screen to hold the device.
I done that ages ago on a case for a XDA mini, and it worked quite nicely but obviously there is a thin line between making the in and out easier and making the case unusable by cutting in too far...
Again thanks for your input...
...this chunk of zeroes and ones has been generated by flashing a 400 Watt halogen bulb into the open fibres of a transcontinental communications cable...

Thank you for good products to introduce.

Anti Smudge Screen Protector

Just came in today and it is awesome. Doesnt reduce visibility and the screen is always clean. Got em on ebay 3 for 3. just an fyi
Sent From My VooDood Charge

eBay Link?
10chars

http://cgi.ebay.com/Fr-Samsung-Droi...988676?pt=PDA_Accessories&hash=item20b9f7f584

Thanks. I just ordered some Steinheil Crystal Clear, too late to cancel they just shipped but I may just send them back and pick these up.

They are so worth it. Makes the phone much much better
Sent From My VooDooed Charge.

Do these make the display look foggy or less sharp like the Verizon Anti-Glare screen protectors do? I am looking for something crystal clear like what I have on my original droid.

Cramit D. Frog said:
Do these make the display look foggy or less sharp like the Verizon Anti-Glare screen protectors do? I am looking for something crystal clear like what I have on my original droid.
Click to expand...
Click to collapse
Bump. I had an anti-smudge screen protector on my prev iphone, and it also made it hazey and less sharp.
Please tell.
Sent from my Samsung Droid Charge using Tapatalk

I keep thinking that someday somebody will make a phone with a non-glossy screen, and save me the insanity. Guess not. I got the 3 pack of anti-glare covers, and struck out with applying them. Each time I got atiny peice of lint underneath that made my OCD go nuts.

RaptorMD said:
Thanks. I just ordered some Steinheil Crystal Clear, too late to cancel they just shipped but I may just send them back and pick these up.
Click to expand...
Click to collapse
I got the steinheil crystal clear and it works perfectly! fits the screen well and doesn't degrade screen visibility.
Sent from my SCH-I510 using XDA App

I got the ones listed on the eBay link. While I may not have smudges anymore, the screen is NOT as clear and just has this...weird look to it. I don't like it. You get what you pay for I guess...

Equinoux said:
I got the ones listed on the eBay link. While I may not have smudges anymore, the screen is NOT as clear and just has this...weird look to it. I don't like it. You get what you pay for I guess...
Click to expand...
Click to collapse
I have to agree, they aren't nearly as good as the OP said they are. The screen looks like it has thousands of tiny dots on it now, hardly invisible.

$6 GLAStR Tempered Glass

http://youtu.be/q-0m4BBLVs8
I bought one for $9 but noticed that the seller on ebay has reduced the price to $5.87.
I'm not sure if it's fake, but I suspect most of these are manufactured in the same place.
The screen protector came in a plain brown box with no dust cloth or alcohol wipe, but I didn't pay $39 and those extras aren't worth that much upcharge.
The printed instructions on the packaging say, "GLAStR" but I suspect it could be fake. In any case, it works just as well as the real one and for $6-$9 I can replace it at any time and not be worried about the cost.

cool... easy install... link??? (i couldn't find it)
SGS5

kanyewest said:
cool... easy install... link??? (i couldn't find it)
SGS5
Click to expand...
Click to collapse
am i allowed to post direct ebay links?
look for tempered glass screen protector and sort by price going from lowest to highest. It should be a US based seller in San Francisco.

kanyewest said:
cool... easy install... link??? (i couldn't find it)
SGS5
Click to expand...
Click to collapse
http://www.ebay.com/itm/Samsung-Gal...l_Phone_Screen_Protectors&hash=item2339280080

Well, just bought...should be here next tuesday, will update then...only thing I wish the video showed (since I'm not familiar with tempered glass) is the actual use of it after installed with them swiping and selecting stuff

Dennisg34 said:
Well, just bought...should be here next tuesday, will update then...only thing I wish the video showed (since I'm not familiar with tempered glass) is the actual use of it after installed with them swiping and selecting stuff
Click to expand...
Click to collapse
Sorry, I didn't post that part because I like to keep my videos short and to the point.
But to answer your concerns, it feels just like a regular screen without screen protectors.
That's the benefit of glass and the clarity is unmatched.
I hate sticky screen protectors like skinomi and xtreme guard and don't like the tackiness on those types.
Dry install ones like Spigen are what I usually used, but even those eventually start to show scratches and dont have complete clarity.

seoulbrova said:
Sorry, I didn't post that part because I like to keep my videos short and to the point.
But to answer your concerns, it feels just like a regular screen without screen protectors.
That's the benefit of glass and the clarity is unmatched.
I hate sticky screen protectors like skinomi and xtreme guard and don't like the tackiness on those types.
Dry install ones like Spigen are what I usually used, but even those eventually start to show scratches and dont have complete clarity.
Click to expand...
Click to collapse
Oh wow, didn't even know that was you in the video! Assumed it was a random guy posting it lol. But ok, sweet thanks for the info! Yeah i currently have the cheap (but still $13 at Verizon..I know, i forgot to order online with my case ahead of time of getting the phone) flimsy ones that no matter how hard i try seem to get a bubble or two

Great video and very helpfull.

I can confirm that these ARE THE SAME AS SGPs GLAStR, it is from the same factory :good:
How do I know? I have the sample sitting on my desk :laugh: