Related
does anyone know how can i disable the screen rotation?
when i close the top with the screen facing up, it goes automatically to portrait mode and i want it to stay in landscape...
i read somewhere that we can disassemble a magnet that makes the swith but i don't want to touch the hardware.
please help...
Disable MIS1 device
Skwyk said:
Disable MIS1 device
Click to expand...
Click to collapse
can you specify that?
what's the MIS1 and where can i find it?
thanks
Use FdcSoft task manager, go to Devices tab and stop/disable MIS1 device
Skwyk said:
Use FdcSoft task manager, go to Devices tab and stop/disable MIS1 device
Click to expand...
Click to collapse
Thank you very much Skwyk. I was looking for that trick for months.
hello all
FdcSoft task manager I can't find this program, any link pls
google.com is the best link
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,27,15027,page=1
ooo thx Skwyk
hi. I Disabled MIS1 device using FdcSoft task manager and now I tried to enable/start it again but it just shows error..and now my screen wont get portrait or landscape (depending on where I filp the universal upon soft reset). It will remian at one orientation.
I deleted the exe.file & replaced with another version of the task manager but no success.
Is there any other task managers that i can enable the MISI again? pls help.
p.s. It seems I can't use the cab file "show rotate icon' after using this..
thank you all for your help.
after disabling the automatic rotation, i couldn't turn it back on but for me it's perfect just the way it is now.
thanks.
I like portrait mode, but after using camera it's stays in landscape and i need rotate back to portrait manually
daddypool said:
hi. I Disabled MIS1 device using FdcSoft task manager and now I tried to enable/start it again but it just shows error..and now my screen wont get portrait or landscape (depending on where I filp the universal upon soft reset). It will remian at one orientation.
I deleted the exe.file & replaced with another version of the task manager but no success.
Is there any other task managers that i can enable the MISI again? pls help.
p.s. It seems I can't use the cab file "show rotate icon' after using this..
Click to expand...
Click to collapse
It's a task manager bug, ask the authtor, he's somewhere here
Skwyk said:
It's a task manager bug, ask the authtor, he's somewhere here
Click to expand...
Click to collapse
I asked the question and got a working answer:
To re-enable the MIS1: device, set it as automatic using the Task Manager. Then use the registry editor (also in the task manager) to remove the following Keys
"HKLM\Drivers\BuiltIn\OEM_Misc\Flags"
and
"HKLM\Drivers\BuiltIn\OEM_Misc\Default Flags"
wait a few seconds, exit the task manager, wait a few more seconds and then soft reset. When the device comes back, automatic screen orientation is once again enabled. I suspect that its just a small bug in the program, and now I have a work-around I'm very happy, but I hope the author does produce a new version
this answer came a bit too late...i did it the hard way.."sprite backup"...anyway..auto switch orientation is actually pretty cool, except, when i flip it during an incoming call..it tends to "lag"...and the call gets unanswered!!! now the problem is...i can't seem to put back the default "show screen orientation" cab file for the tray bar icon!
I've just had a play, and adding a dword value of 1000 (hex) with the name of Flags to HKLM\Drivers\BuiltIn\OEM_Misc\Flags has stopped the auto-rotation, but the little icon on the today screen still works - best of both worlds for me.
Cheers,
Steve.
StevePritchard said:
I've just had a play, and adding a dword value of 1000 (hex) with the name of Flags to HKLM\Drivers\BuiltIn\OEM_Misc\Flags has stopped the auto-rotation, but the little icon on the today screen still works - best of both worlds for me.
Cheers,
Steve.
Click to expand...
Click to collapse
Good idea Steve - that works fine for me too
Chris
weasel said:
Good idea Steve - that works fine for me too
Chris
Click to expand...
Click to collapse
Looks like there may be unwanted side effects. Sometimes the screen's backlight times out, despite having that setting switched off, but it does come back on if you touch the screen, and sometimes the screen doesn't go off when you close the clamshell. :-(
Cheers,
Steve.
hi there!
I downloaded JUVS HTC Large Titlebar and HTC Enlarge Start menu CABs and installed both on my E-TEN M800 (VGA).
They installed fine and I now have the "large start menu" item in my system settings.
But when I check the checkbox to turn it on, it still doesnt enlarge.
I rebooted the device and still nothing. I basically only need the zooming of the notification icons in the start-bar.
have I missed something? do i need additional files?
thanks
Bernhard
the old one just for QVGA, try this one, but dun know can it work on ETEN
thanks, but it doesn't work.
maybe it needs touchFLO so its only activated when you use the finger? or something like that?
No touchflow wouldnt make a difference on this. Unfortunatly some of the items on here will only work with HTC devices and i think this may well be one of them im afraid. Unless anyone else can shed any light
Tried the Large Start Menu once on my iPAQ, and what I found was that the service (htcStartMenuService.dll) doesn't automatically start. Using DotFred's Taskmanager to manually start the service made the large start menu appear... until the next soft reset.
The same thing probably happens with the large titlebar thing.
thanks ridolfo, this works!
now i have to find a way to start it automatically on reboot
makes my e-ten even more userfriendly!
edit: i just added this nice and useful taskmanager to my StartMenu and on reboot, i open it, go to the services tab and click the little start icon for the LargeTitleBar service. thats it.
works like a charm.
IIRC, you can even open it on the services tab, using a command-line switch. Have a look in the "About" screen for possible command-line switches (I think it's in the "About" screen, but I'm not sure).
I'm still hoping that someone can explain why some of the HTC services do auto-start, but others don't.
yes, because when you install the LargeTitleBar it correctly creates its entry in the Registry and is bound to be started, but somehow it doesnt.
In my brand new HTC Touch Cruise, large menu option is ticked, but after playing around with apps or settings it becomes small, allthough it's still ticked. I have to disable and reenable it to make it big again. It's a bit of a problem, as it happens often. Advice would be appreciated.
same problem
couldn't this problem be fixed by some registry entires ?
I mean to put an application into autostart shouldn't be a problem, well for me, as a hardcore newp it is acutally, but maybe not fo you guys
on my xperia x1 i've got the same problem .
large start menu
bommel0815 said:
...
now i have to find a way to start it automatically on reboot
...
Click to expand...
Click to collapse
Hi! at all!
Have you found a solution?
My WiFi shuts off every time my screen blanks out. I can see this being good if I were on battery, but personally only use WiFi when plugged into A/C. Is there a registry edit that'll change this 'feature' and leave WiFi running?! Thanks!
Yeah, that fix would be nice!
I noticed that Skype by-passes idle-mode in it's software and that's one way to fix it. To bad that not all apps do that...
If you use it only when charging, you can configure your cruise to stay on when the device is charging.
Mi cruise is in Spanish, so i will translate the options as i think it must be in english.
Go to START, CONFIGURATION, SISTEM, ENERGIE, ADVANCED
And there you can configure the options to turn off the device when is on battery and when it is charging.
Hope it will be usefull.
That was an answer to a different question, perhaps someone will find your tip useful. Thanks though.
The question is how to stop WiFi from shutting off when the screen blacks out, whether or not it's plugged into AC.
gastonfama said:
If you use it only when charging, you can configure your cruise to stay on when the device is charging.
Mi cruise is in Spanish, so i will translate the options as i think it must be in english.
Go to START, CONFIGURATION, SISTEM, ENERGIE, ADVANCED
And there you can configure the options to turn off the device when is on battery and when it is charging.
Hope it will be usefull.
Click to expand...
Click to collapse
Hi, Benjimen, did you check Schap's Advanced Config 3.2.0.0, there are some settings for Wifi. I haven't tweaked/tested any of them since I don't use much of Wifi. Hope it may help you.
Thanks -- I've read about that, but haven't tried it. Was really hoping someone knew the registry tweak to accomplish it, looks like I'm out of luck though
It sounds like you're 'guessing' it might be a feature? Does anyone who has tried the program actually know and care to post factual info? I took a look at the info for the software, and it does't appear to be one of the tweaks, at least not in the example screens.
02xda2 said:
Hi, Benjimen, did you check Schap's Advanced Config 3.2.0.0, there are some settings for Wifi. I haven't tweaked/tested any of them since I don't use much of Wifi. Hope it may help you.
Click to expand...
Click to collapse
I have the Schap's Advanced Config 3.1.0.0 installed and i cant find enything about that, only to shutdown the wifi if there is no activity....
I alsa didnt know that there was a 3.2.0.0 version, will try to check that out later.
Chears.
PS: sorry benjimen if my previous post didnt help...
i have downloaded the 3.2.0.0 and i also could not find anything there that could solve your problem.
Chears.
the problem is when one click the power button one dont
turn off the screen
one suspend the device power most systems down
you can get programs which just turn off the screen
which would leave the wifi on
but the device run out of batt pretty fast if it's
not suspented
In Polaris.Aserg.WM61.WWE ROM WMP plays when the screen is switched off, Probably you can check with him for your requirement.
02xda2 said:
In Polaris.Aserg.WM61.WWE ROM WMP plays when the screen is switched off, Probably you can check with him for your requirement.
Click to expand...
Click to collapse
...doesn't make a whole lot of sense, as this topic is regarding WiFi. Thanks though...
Rudegar said:
...you can get programs which just turn off the screen which would leave the wifi on but the device run out of batt pretty fast if it's not suspented...
Click to expand...
Click to collapse
...yes, you can get lots of programs to do lots of things -- would be relevant of you to provide an example, which programs are you referring to? Again, not interested in what WiFi does to the battery, but thanks for that reminder
benjimen, as was given as a tip changing the time-out is a working temporary solution.
I did something similar with a software that allowed me to make "user profiles". The "work" profile had a longer time-out just to keep my wi-fi active
Snapphane said:
I did something similar with a software that allowed me to make "user profiles". The "work" profile had a longer time-out just to keep my wi-fi active
Click to expand...
Click to collapse
...interesting, what software might that have been?
How frustrating I saw this topic and thought it would help me do what the OP is trying to do, but it's just a bunch of non-answers Don't people read the original question before answering?
benjimen, sorry if I am bothering you - did you check http://forum.xda-developers.com/showthread.php?t=329139 and the links mentioned there.
http://classic.pocketgear.com/software_detail.asp?id=14497&associateid=9
or find more programs like it using google to search
http://www.google.dk/search?source=ig&hl=da&rlz=&q=pocketpc+toggle+screen&btnG=Google-søgning&meta=
Thanks for trying Rudegar, but who really wants to install another layer of junk just to accomplish what should be an option.
Thank you 02xda2, I found a tweak in the thread you linked to, the registry entries did the trick! Here they are for anyone who might be interested:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Unattended\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
If you need to change it back, the default entry for all of them (at least on my Cruise) was set to 4
enble wifi on stanby mode
benjimen said:
My WiFi shuts off every time my screen blanks out. I can see this being good if I were on battery, but personally only use WiFi when plugged into A/C. Is there a registry edit that'll change this 'feature' and leave WiFi running?! Thanks!
Click to expand...
Click to collapse
Enable schaps advanced config 3.2 -> menu -> more settings -> connections and check "enable wifi on standby mode"
cheers
Thanks, but I got it with just the registry entry. I've always had bad luck with the do-it-all tweaker programs, at some point set something I shouldn't and mess something up.
I was looking for a way to do it via a registry edit, and found it thanks to another poster here -- if anyone is looking to do the same it's a couple posts back, or click here.
milukr said:
Enable schaps advanced config 3.2 -> menu -> more settings -> connections and check "enable wifi on standby mode"
cheers
Click to expand...
Click to collapse
Hi all, after searching with no luck, i'm hoping i can get some help from the great crew on this forum. im not sure what i installed or did with a tweak or cab or whatever but now in drop downs and in some programs, the text is super squished and cannot be read. further, when typing in text boxes in WM (gladly not in this text box), it comes out as white text so i cant read what im writing, any ideas how i can fiz or reset this without a hard format? Wierdly enough, idk when it started or how, thx in advance.
check and see if you enabled landscape cleartype in schaps advanced config 3.3. on my fuze if i enabled landscape cleartype, the text rendering got messed up like you said.
a minute late
My Fuze does that when clear type is enabled for landscape. Did you by chance enable that option in some tweak program?
wow ty ty ty, ur all right it seems. i think that fixed it. I shoulda just posted sooner, i've been frustrated with this for weeks! thanks again all!
Hello,
I am looking for a program that automatically locks my touch pro as soon as I put it in standy, with the on/off button. Because normally my phone is on vibrate and when I take him out of my pocket again it has typed text messages, called people etc etc.
Thanks!
Bob
Search for S2U2, Pocketshield, Throttle Lock, Touch Pro Lock... There are plenty of these programs on XDA.
You can also use AdvancedConfig to enable autolock if you don't want to install any 3rd party software.
bubble said:
You can also use AdvancedConfig to enable autolock if you don't want to install any 3rd party software.
Click to expand...
Click to collapse
what setting in adv config? I don't see one that controls screen lock. Am I just blind?
chrisjaffe said:
what setting in adv config? I don't see one that controls screen lock. Am I just blind?
Click to expand...
Click to collapse
I hate to report that yes, you are lol. It's under the "Screen" set of options in Advanced Config. Once you enable it, it's exactly wat ur looking for, no need for other battery draining 3rd party apps lol
since this thread is already started, i didn't want to start another one. does anyone know of any way (like tweak) to prevent the built-in autolock feature from minimizing all programs? for example, i'll be on opera, have to get sumwhere quickly so I press the power button to put on standby and enable the autolock, and when I turn teh screen back on, the TF3D Home screen is showing, and opera will be minimized. can get pretty annoying if ur in the middle of doing something important on the phone lol
nitroblu said:
I hate to report that yes, you are lol. It's under the "Screen" set of options in Advanced Config. Once you enable it, it's exactly wat ur looking for, no need for other battery draining 3rd party apps lol
Click to expand...
Click to collapse
I'm not seeing it either. Version 3.3 and only thing under screen related to lock deals with the backlight.
KCMatt said:
I'm not seeing it either. Version 3.3 and only thing under screen related to lock deals with the backlight.
Click to expand...
Click to collapse
Whew!! I thought I was going nuts. I was sure that it was not there. I was using NATF's 2.2 ROM and installed ADV config 3.3. There was not an auto lock option. However, this week I flashed to RRE's v4.4 ROM which has adv config preinstalled and there is an option for Auto Lock and to set the delay. I am pretty sure that they were both version 3.3 so i am not sure what happenend.
Oh well. It is there now.
cj
i am using pdacorner rom v17, and in advcfg, there isn't any autolock, in screen, What should i do
In ACT 3.3.0.0 under Screen, the 4th item is called "Auto device lock". Put it in Enable and you have what you want
I'm not seeing the option for 'Auto Device Lock' either, and I'm running Advanced Config 3.3.0.0 as well.
I have downloaded advanced config 3.3 from schaps and it does not give me the option to set the autolock either. I have also used a version packaged with RRE's 4.4 ROM and that did have the option. So I must be doing something wrong but i am not sure what.
But if you want to set it you can always try Diamond Tweak. that gives you the autolock option also.
Hope this helps
cj
Yes, thanks very much for the tip about Diamond Tweak. That worked perfect.
The only problem with this autolock feature is that it's still pretty easy to answer a call inadvertently. Ohter screen locks make it more difficult to answer a call by accident.
I can't get AutoLock Screen v 1.7 to start... I've installed it, soft-reset, made the settings, pressing the "Cancel" button...
...and my OMNIA is getting locked with the "traditional" way, the left bottom button "Locked" appearing and if I'm pressing it another button in the middle of the screen appears.
WHERE IS THE BLOODY AutoLock Screen v 1.7??? Why doesn't starts?