Database Info

G1 Help! T-mobile hotspot access via laptop using G1

Hey everyone, I know you cannot use the the G1's hotspot access on any device other then the G1. I spend alot of time in Starbucks. Is there a way to use the G1's hotspot access for Internet on my laptop. Tethering via wi-fi is nice as is but with only edge here in Hawaii, its too slow. I was hoping someone could help me figure this out. Hopefully just a socks proxy, method will be developed for web surfing.

username should be your mobile number without dashes so 9545555555 and pw should be last 4 of social security number as listed on tmobile account, if not call and theyll fix account, mine was inactive at first

mdanerd said:
username should be your mobile number without dashes so 9545555555 and pw should be last 4 of social security number as listed on tmobile account, if not call and theyll fix account, mine was inactive at first
Click to expand...
Click to collapse
hey! thats my phone number!!!!

You can use the port forwarding app in this thread: http://forum.xda-developers.com/showthread.php?t=443025. Get you G1 signed on to the hotspot and use the program to tether your laptop.

I wasn't aware that I could use t-mobile hotspots from my laptop by logging in with my phone number. I'll have to try that out next time I'm in Starbucks. Thanks for the tip!
So if the above works for you, you're probably set, but if you have rooted your phone you can also use the tetherblu app here:
http://androidactivity.com/
This would allow you to use the free t-mob wifi hotspot access on your phone and connect to it with your laptop. It's a MUCH faster connection than the SOCKS proxy method, and you don't have to carry around a USB cable.

mdanerd said:
username should be your mobile number without dashes so 9545555555 and pw should be last 4 of social security number as listed on tmobile account, if not call and theyll fix account, mine was inactive at first
Click to expand...
Click to collapse
I was told that doesn't apply to the G1 data Hotspot account. Can anyone else confirm that? I'd love to have it working again.
Of course, I know I can use my G1 and tether the Hotspot to the laptop.

SoTacMatt said:
I was told that doesn't apply to the G1 data Hotspot account. Can anyone else confirm that? I'd love to have it working again.
Of course, I know I can use my G1 and tether the Hotspot to the laptop.
Click to expand...
Click to collapse
That's what I was told. Pisses me off because I was told that the G1 data plan included "HotSpots" without being told that it was on the phone only.
You can get 2 hours free at Starbucks, FYI, if you buy something on a Starbucks Card (gift card, not the credit card).

I was told that even my laptop would work... but soon found out otherwise.

neoobs said:
I was told that even my laptop would work... but soon found out otherwise.
Click to expand...
Click to collapse
Honestly the idea of paying for WiFi has run its course. All of the (non-Starbucks) coffee shops around here offer free WiFi.
One thing you might find interesting is that pretty much every sports bar (e.g. Buffalo Wild Wings) has free WiFi. Why? Two words: fantasy baseball.
Even our airport (Denver) has free WiFi now, although you have to sit through an ad to access it.

Any news on this. I thought I had seen somewhere an app that did this, but I can't find it anymore. Why doesn't someone make a "TetherPatch" application. Screen splits into two halves. On one side how your computer is connecting to g1 on the other how your g1 is connecting to internet. And the app makes the "patch" to get the data flowing. If you make the app, gimme some love.

memorito said:
Any news on this. I thought I had seen somewhere an app that did this, but I can't find it anymore. Why doesn't someone make a "TetherPatch" application. Screen splits into two halves. On one side how your computer is connecting to g1 on the other how your g1 is connecting to internet. And the app makes the "patch" to get the data flowing. If you make the app, gimme some love.
Click to expand...
Click to collapse
There are tethering apps out there already.

Could you tell me which apps allow me to connect this way?
laptop >> USB >> G1 >> WiFi (Tmo HotSpot)
I found the one that let's you connect to the net over the 3G network. I am looking for a way to use this concept at a hotspot. Thanks. All my searches don't seem to get me that info.

It's a no go with the G1 data plan. You can connect to the hotspot via the G1 but not from your laptop. Kinda stupid in my eyes seeming I could do it with when I had my Dash...but oh well...on to other methods.
-Tonloc69

By the way this was verified by T-Mo and I even tried fighting about it...damn...damn...damn

How To: Tether (VZW)

This is how I got my TP2 to tether with my laptop. (I have an unlimited data plan.)
The Internet Sharing app is 'hidden' in the /Windows folder. It's named "IntShrUI".
1. Go into your /Windows folder. (I sorted by name to help find it quicker)
2. Press and hold IntShrUI until the menu comes up. Select 'Copy'.
3. Navigate to your Start Menu/Programs folder.
4. Press and hold, then select 'Copy Shortcut'.
5. Rename it to whatever you'd like (I renamed it 'Internet Sharing')
It should now show up in your Programs. The only option available is USB, and I keep the Network Connection set to Verizon Wireless...not sure what the 'VZW Embedded GSM' option does. Connect your phone to the your laptop/desktop (make sure you have Activesync installed). Hit connect, wait about 5 seconds and you should be good to go. Again I have the unlimited data plan. This may work with the Sprint/T-Mo versions as well.
If anyone knows how to unlock the Bluetooth option instead of USB, please let me know...I know with my old LG Incite there was a Bluetooth option and it kept me from having to pull out my cord every time.

Thanks man. The GSM is well, for GSM, which is more or less crippled on the stock ROM.

Does this make tethering available without paying for the tethering plan? I have the unlimited data/email 39.99 plan, but when I said I wanted to use it "with my computer to connect to the intnernet" they said it would be an extra 50 or 60 a month!
As an aside I've heard about software to turn your phone into a wireless router type hotspot? Does anyone know anything about this?

gliscameria said:
Thanks man. The GSM is well, for GSM, which is more or less crippled on the stock ROM.
Click to expand...
Click to collapse
Not to hijack this but, is there a reason it's crippled? Once you've unlocked it, is there something else it can't do within the capability of the radios in it?

Murphy71984 said:
This is how I got my TP2 to tether with my laptop. (I have an unlimited data plan.)
Click to expand...
Click to collapse
Oddly enough, my Internet Sharing was already there. Have ROM 1.18.605.12 with VZW

Mrdzone said:
Does this make tethering available without paying for the tethering plan? I have the unlimited data/email 39.99 plan, but when I said I wanted to use it "with my computer to connect to the intnernet" they said it would be an extra 50 or 60 a month!
As an aside I've heard about software to turn your phone into a wireless router type hotspot? Does anyone know anything about this?
Click to expand...
Click to collapse
You want to be very careful with tethering this thing - I have been doing the tethering thing with VZW since my VX7000... Originally, they billed data by the minute, not the MB... They have since changed and with the new plans (the $29.99 Smartphone Data/Email and the $44.99 Wireless Sync or the $59.99 Broadband Connect - including Wireless Sync) they are monitoring data usage closely.
What you will first run into is the 'unlimited plan' has a ceiling of 5GB, which on a phone is tough to reach, but on a laptop, you can reach it pretty quickly. The second part is that VZW is very strict about data calls and will begin to throttle your data speeds if you exceed your bandwidth allowance.
The second part, is the browser you are using can be traced by their servers. If you log in directly - instead of using a program that masks your computer like PDANet - they will see that you are using IE or Chrome as your browser and begin tagging the extra $30 or $15 on to your account - or cancel your service completely.
Overall, there are many ways to get around paying for the tethering service, but they are all to be considered at your own risk type things. As far as the WiFi routing option, the GSM router hack doesn't seem to work correctly (at least not for me) yet...
That's just my 2 cents, and hopefully that helps a bit and eliminates some confusion.

Murphy71984 said:
If anyone knows how to unlock the Bluetooth option instead of USB, please let me know...I know with my old LG Incite there was a Bluetooth option and it kept me from having to pull out my cord every time.
Click to expand...
Click to collapse
I have the Sprint TP2, and was able to enable Bluetooth Dial Up Networking. This may work with the Verizon model as well.
http://forum.xda-developers.com/showthread.php?t=560865&highlight=enable
If I remember correctly, step 4 was the one that allowed my PC to discover BT DUN service. The other steps were done to prevent carrier detection of tethering.

mugsy77 said:
Oddly enough, my Internet Sharing was already there. Have ROM 1.18.605.12 with VZW
Click to expand...
Click to collapse
I have "Modem link" which appears to support USB or BT tethering. Standard VZW WM 6.5, ROM 3.04.605.3 11/17/09 RHOD500

dhcernese said:
I have "Modem link" which appears to support USB or BT tethering. Standard VZW WM 6.5, ROM 3.04.605.3 11/17/09 RHOD500
Click to expand...
Click to collapse
Never mind: "Modem link" requires that you kick off VZW access manager. However, "IntShrUI" bypasses that requirement and tethers through USB but not bluetooth as you all already found out.

Ah ha! I knew there must be a way to get an internet connection on my laptop when my HD2 is just about out of battery power (often). Thanks Murphy, now I can use my laptop to power the HD2 and the HD2 to connect to the internet - Sweet!

USB Tether with rooted Hero?

I still can't get this to work. Unfortunately at my work, we have some corporate policy that keeps me from accessing my wireless tethering connection the tether app creates in modaco's 1.1 rom. Doubt it's anything with the app, but rather I just can't connect to "that type" of connection.
So, that leaves me with USB tethering. No problem at all! But, how do I do it? I'm still getting error 67 codes even though I've got root access. Thanks for help in advance!!

I haven't tested this but these commands (entered either through adb or a terminal emulator on the phone) should get you up and running with USB tethering (make sure you have the drivers installed on your computer from HTC Sync).
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
To turn it off just go into your wireless controls and disable wireless sharing to reset everything.

The easiest way to achieve WORKING WiFi tether is with MoDaCo 1.1. If you've already rooted, you should have used nandroid to create and restore (to make sure your backup works!) a backup. The app "Quick Boot" on the market is the easiest way for you to reboot into recovery mode without having to use adb. If you have a working backup, then you should really try out the ROM, as you can always revert back if something goes wrong! Essentailly, ya got nothing to lose!
P.S. I posted this using Wifi Tether App with MoDaCo Rom 1.1! AWESOME!

lonequid said:
I haven't tested this but these commands (entered either through adb or a terminal emulator on the phone) should get you up and running with USB tethering (make sure you have the drivers installed on your computer from HTC Sync).
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
To turn it off just go into your wireless controls and disable wireless sharing to reset everything.
Click to expand...
Click to collapse
I tried this from a shell last night, and it DID turn on my mobile connection sharing, but I still got error 67's, no differently than if I would have checked the check box in wireless settings. So, it appears this is no dice.

theraginasian said:
The easiest way to achieve WORKING WiFi tether is with MoDaCo 1.1. If you've already rooted, you should have used nandroid to create and restore (to make sure your backup works!) a backup. The app "Quick Boot" on the market is the easiest way for you to reboot into recovery mode without having to use adb. If you have a working backup, then you should really try out the ROM, as you can always revert back if something goes wrong! Essentailly, ya got nothing to lose!
P.S. I posted this using Wifi Tether App with MoDaCo Rom 1.1! AWESOME!
Click to expand...
Click to collapse
I also have MoDaCo 1.1 and while I believe that the wifi tethering DOES work, my work laptop blocks the wireless connection, possibly because it sees it as a peer to peer maybe. In any case, I couldn't tether wirelessly before either in Vista with Windows Mobile either, had to use the USB cable. In all honestly, I like that more anyway because it charges the phone at the same time.
So, anyone that is rooted with a Sprint Hero, can you tether with USB without 67 errors? Thanks in advance!

+1 this thread.
I prefer USB tether to WiFi tether for a couple reasons.
First, it uses less power, so even if your phone is plugged in via USB, it will charge faster.
*EDIT* So, after using the WiFi tether app with my phone plugged in via USB and my laptop plugged in, my phone was LOSING battery, albeit at a slower rate.
Second, I used to get lower ping times with my phones tethered via USB when I had a Blackberry and a Palm Pre (usually 90-130 ms) With the WiFi tether, I seem to be getting 150-230 ms ping times.
Third (and I don't know if this is the same for everyone else, but) I'm getting only 0.8-1.2 mbps down speeds and only 0.2-0.5 mbps up speeds.
So yeah, if people would still keep looking for a mobile network sharing exploit, I'd greatly appreciate it

Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Just because you've rooted doesn't mean it removes Sprint's system of how people tether. They use a two-NAI system. 1st NAI = your normal data username and password. 2nd NAI = Your PAM (Phone-As-Modem) password which is issued when people have that add-on on their plan, which can't be added to the Everything Data plans.

ajones7279 said:
Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Click to expand...
Click to collapse
The point the original poster was making is that WiFi tether is not an option for them. Since I'm in the same boat a USB Tether option (if it was ever discovered) would be useful. I don't think it's a ridiculous question to ask if there was a way to do it. I've USB Tethered with my iPhone and Nokia E71 without a problem.
Like the original poster my corporate laptop's security policy does not allow me to connect to an Ad-Hoc network, like the one created through WiFi tether.

ajones7279 said:
Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Just because you've rooted doesn't mean it removes Sprint's system of how people tether. They use a two-NAI system. 1st NAI = your normal data username and password. 2nd NAI = Your PAM (Phone-As-Modem) password which is issued when people have that add-on on their plan, which can't be added to the Everything Data plans.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=4960553#post4960553
http://code.google.com/p/android-wired-tether/
This app is the wired version of the Wireless tether that comes installed on the MoDaCo rom.
I've been following this app recently, and have it installed on the Hero, but of course since it was ported for the G1 only, it doesn't work on our Hero. It's interesting because it was created with pieces from the Hero in the first place. It says on the site that it will tell you that you do not have the proper kernel installed if that requirement isn't met, and I'm NOT receiving that message.
In fact, everything seems to go just fine when I launch the app, and allow root access. It's right after that where I get a FC as the app is trying to access the system settings menu.
Any smarties out there that would care to take a stab at how we could get this working for both the GSM and CDMA Hero?

Why not use PdaNet it seems to work fine on my laptop. I do have a question on tethering however either wireless or usb. Is it ok to do this on a Sprint everything data plan or do I have to upgrade to something else. If I tether without upgrading will I see a large charge on my bill? I do not use it much if ever but was just wondering if this would effect my bill.

redram38 said:
Why not use PdaNet it seems to work fine on my laptop. I do have a question on tethering however either wireless or usb. Is it ok to do this on a Sprint everything data plan or do I have to upgrade to something else. If I tether without upgrading will I see a large charge on my bill? I do not use it much if ever but was just wondering if this would effect my bill.
Click to expand...
Click to collapse
If PDANet wasn't 30 bucks, I'd gladly consider it. However, I've been tethering over USB with all of my Sprint phones for goodness knows how long, with no problems.
With your everything data plan, you shouldn't see any problems at all. The wired tether app basically just starts an adhoc wireless connection, and then funnels through your data connection to the laptop connected to it. To the data line, and to Sprint, it's no different than an app using data.
In essence, this is how ANY wired USB app should eventually work from a tethering standpoint. Yes, Sprint uses a two tiered NAI system to control data and PAM. However, the trick ALWAYS has been to have the phone not report/act that it's using PAM, rather just turn on mobile sharing and funnel through the internet connection. This is how it worked with Windows Mobile phones too, and eventually will be the same with our Hero. It will have to eventually be done on the Application level, rather than using mobile connection sharing through settings. When this is activated, the Hero attempts to use the PAM settings. We'll either have to remove this somehow, or do it all through the app itself. It will have to be a "middle man" of sorts, isolating the incoming data line, and then acting as a liaison to push it through the USB to the laptop.
That's how I understand it in my head, anyway

I'm not sure what triggers it, but most of the time that command line works for tethering for me (which is why I originally posted it). About one in five times I get the error 67.

CapnBry said:
I'm not sure what triggers it, but most of the time that command line works for tethering for me (which is why I originally posted it). About one in five times I get the error 67.
Click to expand...
Click to collapse
So, can you help clarify your workflow for using it? Are you running it from an ADB Shell on your laptop, or are you launching it from a terminal emulator on your Hero? Also, do you have any wireless settings modified (such as hybrid vs. 1x only) or do you have the mobile network turned off first?
Or, are you more simply just running this from a shell while everything is up and running as normal?
Thanks in advance!

FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.

mrinehart93 said:
FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.
Click to expand...
Click to collapse
Hmm...I guess I didn't know that. Thanks a lot! This should work until we get a rooted solution.

mrinehart93 said:
FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.
Click to expand...
Click to collapse
Not necessarily. I was tethering daily at one point and they never said a word. This includes browsing and downloading 1gb+ torrents.

Mmmh ... you guys could try this application:
http://code.google.com/p/android-wired-tether/
This is 99% based on "Wireless Tether for Root Users" and might work. I've never tested it on a hero. I have it running on a G1 and Magic ... both with a patched kernel - these patches came from Zinx Verituse and the hero-kernel was base for this port.
No idea if it really works ... but you could try.

harry_m said:
Mmmh ... you guys could try this application:
http://code.google.com/p/android-wired-tether/
This is 99% based on "Wireless Tether for Root Users" and might work. I've never tested it on a hero. I have it running on a G1 and Magic ... both with a patched kernel - these patches came from Zinx Verituse and the hero-kernel was base for this port.
No idea if it really works ... but you could try.
Click to expand...
Click to collapse
Hi harry, I've unfortunately not had this work quite yet, I get a force close from the system settings this app is trying to access. My guess is that the kernel isn't patched for it. We might have to request this in future CDMA Hero roms. Thanks!

kmartburrito said:
Hmm...I guess I didn't know that. Thanks a lot! This should work until we get a rooted solution.
Click to expand...
Click to collapse
I got it for free as well.

I can confirm that the USB tether using the command line works for me. I'm getting 1.28Mb/s down and 0.48Mb/s up.

[Q] Wifi tethering for root users

Able to wifi tether to apple devices, but no luck with laptops or android devices. " does support ad hoc network" What wifi tether programs are others using? Thanks

wifi tether works. i used it this past weekend for 2 days.

if youre already rooted, you can just use native tethering. just delete tethermanager from /system/app no need for barnacle of wifi tether for root.

The Jack of Clubs said:
if youre already rooted, you can just use native tethering. just delete tethermanager from /system/app no need for barnacle of wifi tether for root.
Click to expand...
Click to collapse
What does this mean? I downloaded wifi tether and then uninstalled it, but would like to be able to tether my tablet when we are on vacation. I am rooted.

android has the ability to tether out of the box.
carriers disable that and charge like $20 extra if you wanna be able to tether.
if you use titanium backup and freeze tethermanager.apk (or whatever it is called) you get the ability to wifi tether again without messing with any other third party apps.

look for it in /system/app and once you freeze it delete it or whatever you want to do with it, go to settings > wireless and network > mobile ap. if tether manager is gone you are able to use this native mode already on your phone to tether all you like. i would steer clear of apps like pdanet and tether for root, as usage of these apps appears to be sent back to att by tethermanager.

Is the built in tethering part of AT&Ts "bloatware"? I may have deleted it using Titanium Backup.
Is there a way to get it back?
Thanks in advance.

Thx it worked for me . I installed busy box as root user , then installed titaniumbackup . i went to backup restore tab. Froze tether manager then uninstalled tether manager and it works flawlessly now . Thx forums
Samsung infuse 4G

Yes!
It's these kinds threads that make me want to buy you guys a beer! As a new android user, I know very little, but when I ignore the haters/trolls/ignorant people, and smart asses, I find gems like this. To think I almost paid for it because of the salesman insisting that tethering through AT&T was the ONLY way. Thanks a bunch to all you guys who give back.

Thanks! Worked like charm. AT&T go kick rocks!

Mobile AP warning message
I am running Infused 1.5 on my phone. So from what I am reading in several tethering threads, I am able to use the native app for tethering. When I use MobileAP, the original warning message is still there "A Tethering/Mobile Hotspot plan is required...."
Sorry if this is a noob question, but is this message not supposed to be there anymore? or did I do something wrong?

yes you should not be getting that message. check to see if tethermanager is still in /system/app.

sobeast101 said:
I am running Infused 1.5 on my phone. So from what I am reading in several tethering threads, I am able to use the native app for tethering. When I use MobileAP, the original warning message is still there "A Tethering/Mobile Hotspot plan is required...."
Sorry if this is a noob question, but is this message not supposed to be there anymore? or did I do something wrong?
Click to expand...
Click to collapse
I was just about to post a similar question Im also on infused 1.5 and just tried the tethering, the message your talking about is the one at the top of the screen that doesn't go away that says "Tethering/Mobile hotspot plan is required to use this service. Please ect...." the one I was getting before I installed. The infused 1.5 I would click on the mobile AP box to turn on the tethering and a message saying I didn't have the service would pop up and turn off the tethering but that doesn't happen anymore I also just checked my plan features and tethering does not show up. I remember reading one of the features of the infused 1.5 was tethering but I didn't know how it worked until I read this thread. Thank you guys

But if I'm running Infused, why woukd that file still exist?
So you think I would be ok ignoring the message?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

The Jack of Clubs said:
look for it in /system/app and once you freeze it delete it or whatever you want to do with it, go to settings > wireless and network > mobile ap. if tether manager is gone you are able to use this native mode already on your phone to tether all you like. i would steer clear of apps like pdanet and tether for root, as usage of these apps appears to be sent back to att by tethermanager.
Click to expand...
Click to collapse
And about the message, if its the one that is on the top of the screen and not the one that pops up when u turn on the tethering I would ignore it.

T
not sure if am doing this right ,,,
but I did manage to FREEZE " the Therering manager via Tit'um
and yet I cannt connect to ATT @ their hot spots
what else do I need ?
thanks in advance

Hot spots? Isn't this ment for connecting your phone to your labtop/computer to share your phone's internet?

lalojamesliz said:
Hot spots? Isn't this ment for connecting your phone to your labtop/computer to share your phone's internet?
Click to expand...
Click to collapse
Yes, also called wifi tethering or mobile access point. You can enable this in wireless settings if you pay extra for a tethering plan or remove tether manager.
Sent from my SAMSUNG-SGH-I997 using XDA App

The Jack of Clubs said:
Yes, also called wifi tethering or mobile access point. You can enable this in wireless settings if you pay extra for a tethering plan or remove tether manager.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Okay wait, so just freezing tethermanager wont work. I'd have to uninstall it to tether? I'm running stock rooted btw

i still dont know what freezing means, but it doesnt sound very guaranteed. tethermanager is malicious at best so i just completely delete it, theres no advantage to keeping it around.

[Q] galaxy S5 tmobile wifi tethering free

Hey I'm trying to find a way to work around my hotspot tethering limit. I have unlimited data and want to use the most out of it, I have had unlimited data for about 3 weeks now and I have used 200 gigs of data and I want o be able to co next my Xbox and laptop for more than just a day or 2 because I only get 5 gigs of hotspot. So if anyone has a workaround for the tmobile s5 please comment and let me know

sgs5tetherhelp said:
Hey I'm trying to find a way to work around my hotspot tethering limit. I have unlimited data and want to use the most out of it, I have had unlimited data for about 3 weeks now and I have used 200 gigs of data and I want o be able to co next my Xbox and laptop for more than just a day or 2 because I only get 5 gigs of hotspot. So if anyone has a workaround for the tmobile s5 please comment and let me know
Click to expand...
Click to collapse
Are you rooted?

Yes via towel root

sgs5tetherhelp said:
Yes via towel root
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
I use it on my T-Mobile phones. Follow the link in the description for settings. Gotta warn ya though, it might not work without further tweaks. You might need to google up some more specific instructions. The problem with this app (not the app's fault though) is that every phone/brand/ROM is different and needs different settings, and unfortunately these settings don't have descriptions. Plus the author is Italian and his English ain't too good.
You'll probably also have to create a new APN for tethering. Go to your System Settings, More networks, Mobile Networks, Access Point Names, then hit the menu button to add a new APN. Copy everything in the default APN down, then make everything in the new APN exactly the same, but instead of IPv6, use IPv4.
For tethering to just your laptop though, I recommend PdaNet+ (not a root app) and using USB tethering. The reason is that using your phone as a wifi hotspot is a processor and battery hog, and the more it's used, the hotter your phone will get and the more your battery gets used (shortening its overall lifespan). USB tethering however basically turns your phone into a conduit, rather than a rebroadcaster, and won't fry your phone. It works by using a companion program on your computer (also does bluetooth, but it's much slower), and has the option (which you need to use) to "hide tether usage". Another cool feature is you can set it up so text messages will pop up on your computer. The one single issue with USB tethering with PdaNet is with Netflix. If you try to watch something, it'll take you to the page saying your computer doesn't meet the minimum system requirements. Whatever VPN/proxy/whatever that it uses to mask your usage doesn't jive with Microsoft Silverlight, which Netflix uses. The way around this is to disable the "hide tether usage" option when loading a video, and as soon as it starts loading, select "hide tether usage" again, and you're good to go.
The really cool thing is that these two apps work simultaneously. I use PdaNet to USB tether my phone to my laptop (which is plugged into my 42" TV). The same phone is running Wifi Tether Router so I can use my tablet on wifi. Seriously, how cool is that?!? Complete home internet and cell service for $89.08/month (after taxes).