Related
Hey all.
Got my Touch Cruise recently and so far my experiences are mixed. Here's some of the problems I've had - maybe someone can suggest fixes?
1. Battery life is awful. With Wi-fi enabled I get at most 2 days out of a full charge.
2. Screen sensitivity is poor. Even with the stylus a lot of times I have to press the same key twice or the accuracy isn't 100% - very annoying when sending text messages.
3. When on a call the screen goes into standby meaning you can't easily turn on the speakerphone, mute/hold it etc. I've tried turning off all the power saving options I can find but it still happens.
4. Ring volume levels aren't great. Annoying when I'm out and about or in the car with the stereo turned up.
5. Backlight is very poor outside, or even in the car - basically anywhere where it's exposed to sunlight.
I've changed the UI to the SPB one as I was recommended to do on another forum, and it helps a bit, but to be honest I'm very close to selling it on unless I can get the above issues fixed.
Any ideas? Thanks!
You should check out the many posts on this forum, many of them address your concerns. I'll see if I can take a crack at them:
1) Yes battery life is not great, I wouldn't leave Wifi turned on all day. The less stuff you are using the better, for example if you're not using Bluetooth don't leave it on. Same for the WLAN. Don't have applications constantly making data connections either (prob not applicable if you're on the wifi). An example of such an application would be the weather app. Search the forums for tips on improving battery life.
2) There are registry key entries that improve the touch sensitivity of the screen and TouchFLO. Try this thread as a start. http://forum.xda-developers.com/showthread.php?t=355277
3) There's a registry entry for this, don't use Kaiser Tweak. http://forum.xda-developers.com/showthread.php?t=355230
4) Are you sure the ring volume is to the max? Is the ringtone itself loud? I'm pretty sure there's reg entries for this too, check out the tips and tweaks thread.
5) Yeah if sunlight is hitting it directly the screen is not very visible. Try turning the brightness up to the max. Supposedly there are screen protectors out there that minimize the effect of glare although I haven't personally tried any except for the stock protector.
Overall your best bet is to read the forums and use the search function. You will almost always find someone who has asked the same question in the past. And welcome to xda. HTH.
does anyone have a way to eliminate or turn off the blinking light while the pro is charging? this is really annoying to me especially while i'm in the car.
This would be good for me aswell especially at night. Any ideas?
Just keep your device loaded at 100% charge level.
(sorry, could not resist - just kidding)
I would be interested in a serious answer too! I actually like it but my wife complains about the light in the sleeping room. So I always have to put face down it on the badstand
Kaiser notification
I don't know if it will work with the touch pro, but, on the TyanII/Tilt, do a search for "Kaiser notification". You can control all the @#%$% blinking lights
on the tilt. Personally, I keep them ALL off.
No TP on hand yet... but this is a future concern.
I think this is likely a relatively simple registry edit. I'd look for the value somewhere within HKLM\Drivers\ ... that's where LED notifiers have been in other devices I've messed with.
And once this is found it can be put into a cab... hopefully I can help with this soon (once I actually get one)
p51d007 said:
I don't know if it will work with the touch pro, but, on the TyanII/Tilt, do a search for "Kaiser notification". You can control all the @#%$% blinking lights
on the tilt. Personally, I keep them ALL off.
Click to expand...
Click to collapse
yeah you are referring to
http://www.modaco.com/index.php?automodule=downloads&showfile=2400
just doing a google search thats what i found. i don't think this can work on the touch pro though because there is only one light on the device. plus, the light i'm interested in controlling - the charging light isn't an option
Hi,
I recently bought a HTC Touch HD, and I think that the "shutdown-screen-when-you-answer-a-call" function of phones like Diamonds, Touch Pro and HD is the dumbest way to prevent accidental presses on the touch screen.
Our devices have a light sensor, that could be used to switch off the screen if the phone is near the ear (like the phone using an "i" word ) and keep it on when you answer with loudspeaker for example.
The "problem" with this function is that when you're already in a "no-light" environment, the screen lock function doesn't work.
To resolve this issue, I think we could use the G-Sensor. Indeed, if the place has no light, then, the phone cannot detect the proximity of a ear. But when you put the phone next to the ear, you hold it a the vertical...
To make it short, the app should do :
Do nothing in normal use.
When a call arrives :
- it monitors the ambient light
If there's light :
- when you answer the call, if there's light then no more (you stick the phone next to the ear), it switches off the screen and continue to monitor.
- while in call, if there's light again (you want to see some info on the screen for example), it switches on the screen and continue to monitor.
- and so on until you end the call
If there's no light :
- when you answer the call, but let it at the horizontal (you let it on the desk for example), it does nothing
- if you take the phone on the vertical position (you stick the phone next to the ear), it switches the screen off.
- if the phone, during a call, goes from vertical to horizontal of horizontal to vertical, the screen is switches on/of
- and so on until you end the call
Obviously, you could replace the "switch on/off screen" with "lock/unlock screen".
What do you think about ?
UPDATE :
After playing a bit with the HD, it appears that HTC DOES use the light sensor for turning the screen off during a call.
Let's do a test :
In a place with plenty light :
- put your mobile with the face up
- call a number (always face up) : the screen will not be switched off until the light sensor detects a loss of luminosity or a timeout set in the registry.
So, my conclusion is that HTC already use the light sensor to switch the screen off during a call, but they do it in an absurd way :
- they poll the sensor just to shut down the screen, not to switch it on.
- once the screen has been switched off, they do not longer poll at all.
Do you think it could be a way to "hack" their system to do what we want to do ?
no one has an opinion on this idea ? if there's nobody that want / have the time to develop a soft, I understand, but at least please, give me just your opinion
I agree with your idea for such an application. I must admit that I am very used to just pushing the power button when I answer a call (from Polaris use) to ensure I am not going into other programmes as I rub the phone against my ear. On the other hand I am trying to get used to the Touch HD's modern automatic method but I can't help not feeling relaxed that it has worked and keep trying to look at the screen in the corner of my eye to see if it did go off or not.
If it does not come now I am sure there will be such an app very soon just as you describe especially as all the latest models now have it.
i'd use the half of it that doesn't require the G-sensor as i don't have a diamond or HD...
but i'm certainly sick and tired of my ear operating my touch screen while i'm speaking.
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
fireweed said:
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
Click to expand...
Click to collapse
Maybe the simpliest way to "protect" the screen is to switch it off. I suppose it must be some API to do that ?
Concerning the "locking", I think the simpliest way is to put on focus an empty window (transparent if it can be ).
I'm really happy to know that you're working on an app like that
lpaso said:
Hi,
I recently bought a HTC Touch HD, and I think that the "shutdown-screen-when-you-answer-a-call" function of phones like Diamonds, Touch Pro and HD is the dumbest way to prevent accidental presses on the touch screen.
Our devices have a light sensor, that could be used to switch off the screen if the phone is near the ear (like the phone using an "i" word ) and keep it on when you answer with loudspeaker for example.
The "problem" with this function is that when you're already in a "no-light" environment, the screen lock function doesn't work.
To resolve this issue, I think we could use the G-Sensor. Indeed, if the place has no light, then, the phone cannot detect the proximity of a ear. But when you put the phone next to the ear, you hold it a the vertical...
To make it short, the app should do :
Do nothing in normal use.
When a call arrives :
- it monitors the ambient light
If there's light :
- when you answer the call, if there's light then no more (you stick the phone next to the ear), it switches off the screen and continue to monitor.
- while in call, if there's light again (you want to see some info on the screen for example), it switches on the screen and continue to monitor.
- and so on until you end the call
If there's no light :
- when you answer the call, but let it at the horizontal (you let it on the desk for example), it does nothing
- if you take the phone on the vertical position (you stick the phone next to the ear), it switches the screen off.
- if the phone, during a call, goes from vertical to horizontal of horizontal to vertical, the screen is switches on/of
- and so on until you end the call
Indeed, you could replace the "switch on/off screen" with "lock/unlock screen".
What do you think about ?
I searched the forum for an existing app that could do this, but I didn't find anything.
If there's already an app that do this stuff, I'm truely sorry for this post.
Click to expand...
Click to collapse
I'm looking for this.. If you find a solution send me a PM, I will do the same
Thanks!
We need this app, how does the iphone acheive this?
I think the 'easiest' way to make this app would be to keep the phone doing what it does currently (put the phone on standby when answering a call) then have the light sensor take the phone out of standby when it receives light, (taking it away from your ear)?
Obviously if its dark then we would have to use the power butten as we currently do now or have the Gsensor do it with a twisting motion (vertical to horizontal).
If anyone has an idea how to program this i'm willing to help in any way, the current systems seems so crude on such tech devices!
DB
lpaso said:
Hi,
I searched the forum for an existing app that could do this, but I didn't find anything.
Click to expand...
Click to collapse
There a program, that can help you. Not full, but it can switch off screen, using g-sensor. However its using not vertical aligment of the phone. There are using changing orientation of the phone to decide when phone near the ear.
http://forum.xda-developers.com/showpost.php?p=2622590&postcount=45
I have always wondered why our WM phones don't do what the iphone does...
For the SE Xperia X1, the light sensor is right near the earpiece (along with the little front facing camera), so it would go to virtually 100% darkness when near the ear. I would presume unless you are using the phone also in 100% darkness (which should be pretty rare I would guess) then it would work like the iphone.
I have also been quite annoyed by the fact that after a phonecall, sometimes I found i'm in a note taking program or weather program or something else. It just seems dumb, considering our phone HAVE these lightsensors?!
I think it's a fantastic idea to solve a VERY FRUSTRATING PROBLEM
lpaso said:
no one has an opinion on this idea ? if there's nobody that want / have the time to develop a soft, I understand, but at least please, give me just your opinion
Click to expand...
Click to collapse
I would rank myself this way:
Not a newbie who's just gotten a touchscreen phone and is now discovering the quirks when holding screen to ear,
and not a developer,
but a power-user. I have installed all sorts of XDA-developed features/enhancements for my phone.
But now I have 4 years experience -- starting with the T-Mobile MDA, and its successor, the T-Mobile WING. And despite all of the advancements expected in that time, STILL, I inadvertently end a call, or put it on hold accidentally, ALL THE TIME. Between that and trying to retrieve the phone from my pocket just to answer the damn ringing phone, I would say I have, on the average, a 20% success rate -- and 80% of the time the call is disrupted. And at least once a day my ohone, in my pocket, even when using s2u2, manages to REDIAL my latest conversation, so mcuh so that all my friends say "why don;t you get rid of that phone. It does all these whiz bang things but still can't reliably manage a basic phone call.
My most recent experiment was to call someone, then when they answered, press the s2U2 key to lock the phone screen. Only I came to find out from A_C that this is no good: S2u2 does not have recognition that you're ending the call, thus, since it's in lock-mode, the "END CALL" or Hang-Up hard key does not work.
So by all means, I would even pay for an app that once and for all handles the baseline problems of simply making a phone call. Thanks for making this request.
fireweed, have you contacted A_C, author of s2u2 ?
There may just be perfect synergy between the two of you. His "best of breed" screen-lock app is widely used -- and other developers, like supbro, for example, author of iDialer, have collaborated on small code-bits from A_C to solve some integration problems.
If for any reason you are unfamiliar with A_C, go to his website: www.ac-s2.com -- where his apps are explained, and all link back to XDA.
He's even managed to make the screen lock work, yet, have it selectively overridden when you insert headphone jack -- such that his s2p (slide to play) app opens and allows you to switch music tracks etc while otherwise the screen and buttons are all fully locked...
fireweed said:
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
Click to expand...
Click to collapse
Hi,
After playing a bit with the HD, it appears that HTC DOES use the light sensor for turning the screen off during a call.
Let's do a test :
In a place with plenty light :
- put your mobile with the face up
- call a number (always face up) : the screen will not be switched off until the light sensor detects a loss of luminosity or the timeout set in the registry expires.
So, my conclusion is that HTC already use the light sensor to switch the screen off during a call, but they do it in an absurd way :
- they poll the sensor just to shut down the screen, not to switch it on.
- once the screen has been switched off, they do not longer poll at all.
Do you think it could be a way to "hack" their system to do what we want to do ?
I think HTC does not only switch off the display but goes to standby (phone works independent if you didn't know yet). Your idea is a lot different in terms of programming.
I don't know if it goes to standby : when the screen is switched off during a call, a press on any button switch it on again. In the registry, the key controlling the timeout before the screen is shut off is named "LightSensorToScreenOff" so I think it is just switching off the screen...
lpaso said:
I don't know if it goes to standby : when the screen is switched off during a call, a press on any button switch it on again. In the registry, the key controlling the timeout before the screen is shut off is named "LightSensorToScreenOff" so I think it is just switching off the screen...
Click to expand...
Click to collapse
Well if thats the case, its HALF of what the iphone does... it turns off the screen based on the light sensor going dark suddenly (next to ear) but then fails to turn the screen back on after you move the phone away from your ear...
Anyone know how to enable this?
Interested in having this feature too. Isn't it possible to have the G-Sensor determine when the phone is vertical and shut the screen and then when it is lying flat to turn the screen back on again. Believe that the Iphone does it this way, not with the light sensor.
Hmm... I never had my ear 'navigating' my phone during in-call before....
I never allowed the screen to touch my face anyway, and the speaker is facing the ear canal, when I receive or make calls...
But i do understand that s2u2 can do what you guys might need, it locks the screen during in call.
Hennyb said:
Interested in having this feature too. Isn't it possible to have the G-Sensor determine when the phone is vertical and shut the screen and then when it is lying flat to turn the screen back on again. Believe that the Iphone does it this way, not with the light sensor.
Click to expand...
Click to collapse
I think the Iphone has something called proximity sensor, which senses the distance from the ear to the phone, hence when the phone rest on the outer ear, the phone screen shut off.
Or am I wrong?
Section9 said:
I think the Iphone has something called proximity sensor, which senses the distance from the ear to the phone, hence when the phone rest on the outer ear, the phone screen shut off.
Or am I wrong?
Click to expand...
Click to collapse
No, you're right. It uses an iR sensor to know if there's something near the phone.
Hi to all, is there a way to switch on the HD2 at a desidered time?
I mean: from the phone totally switched off is there some software or mod that makes it auto-turning on?
So battery life could be extended instead of keeping it turned on during the night only for make the alarm clock ring...
On my nokia it was possible make it to turn on automatically and make the alarm ring, I think it's strange that this cannot be done on the HD2...
Thanks for your answers and sorry for my english, I hope you understood anyway
bye
Try CT Scheduler. However, if anyone else here has any idea about other programs that can do this, let me know.
I'm looking for something that does something like this:
1. Turn on phone every 15 minutes
2. Leave it on for 2 minutes (so that calls/text messages can arrive)
3. Turn off the phone
Repeat.
Try G-Alarm
Not to sure if it have the wake up function.
SKSchema is simply the best.
You can schedule what you want on your PDA and it runs great on HD2.
Mtk87 said:
Hi to all, is there a way to switch on the HD2 at a desidered time?
I mean: from the phone totally switched off is there some software or mod that makes it auto-turning on?
So battery life could be extended instead of keeping it turned on during the night only for make the alarm clock ring...
On my nokia it was possible make it to turn on automatically and make the alarm ring, I think it's strange that this cannot be done on the HD2...
Thanks for your answers and sorry for my english, I hope you understood anyway
bye
Click to expand...
Click to collapse
I think this is technicaly not possible because when the phone is off it is not possible to run software.
If you desire it to consume the lowest possible amout of power you may put the phone into flight mode and ensure no background apps are still running.
Some software such as Galarm will turn the phone into flight mode over night and dissable flight mode in the morning with the alarm.
I use phonealarm,
at night I set my phone to automatically switch to flight mode, so that I receive no calls, messages etc, and it uses virtually no battery power, but the alarm still goes off in the morning, and my phone automatically switches back on
I just unlocked my phone by 'interop unlock method' and loaded a few homebrew apps on my samsung omnia w.
now ever since i've done that i'm getting wierd battery life.
battery life finishes very quickly and sometimes just switches off when i reach around the 20% mark directly going to zero.sometimes from full 70% available i becomes 10% within seconds. i am suspecting the battery status homebrew app and have also uninstalled it without any solution to my problem
anyway to fix this without having to reset my phone???
Battery: making it last
There's a lot you can do to make the battery in your Windows Phone last longer between charges. The easiest way is to use Battery Saver. You can set it so that it'll turn on any time your battery gets too low, or if you know in advance that you're going to need to make every bit count, you can turn it on to make sure your battery lasts as long as possible.
When you turn on Battery Saver, your phone automatically turns off some of the features on your phone that use battery in the background. So when Battery Saver is on, your phone will no longer:
Automatically receive emails or calendar updates – You can still sync your email manually whenever you want. To learn more, see Synchronising your email.
Update some Live Tiles – The technical explanation is that if a Tile uses something called push notification to get its updates, it'll stop receiving those updates in Battery Saver mode. But the upshot is that when Battery Saver is on, some of your Tiles won't be updated.
Allow apps to run in the background – You'll only be able to use an app if it's open.
You can still make and receive phone calls and text messages, and browse the Internet.
We've also put together some battery-saving tips to help you get started. The key is finding the balance between getting the most out of your phone while getting the battery life you need.
To turn on Battery Saver
On Start, flick left to the App list, tap Settings Settings icon, then tap Battery saver.
Do one or both of the following:
If you want Battery Saver to turn on whenever the battery gets to 20%, select Always turn on Battery Saver when battery is low.
If you want to turn on Battery Saver now and leave it on until the next time you plug in your phone, select Turn on Battery Saver now, until the next charge.
When Battery Saver is on, the battery icon looks like this: Battery Saver icon
Note
When Battery Saver is on, you won't be able to change the settings for features that are disabled (like email, for example). To change a setting, go to Settings > Battery Saver and clear all of the checkboxes. You can turn it on again when you've finished.
Here are some more tips to help make your battery last.
Reduce the time before the screen turns off
Set a shorter Screen time-out duration and set your phone to lock. This helps save battery power and also prevents your phone from turning on by accident when you put it away. For more info, see Lock screen FAQ.
Lower the brightness setting
On Start, flick left to the App list and tap Settings Settings icon. Tap Brightness, turn off Automatically adjust, then select the Level that you want to use instead.
Use a dark background theme
On Start, flick left to the App list and tap Settings Settings icon. Tap Theme, tap Background, then tap Dark.
Sync music and pictures on your computer
When you're on your computer, connect your phone and sync your favourite music and pictures to it using the Zune software. To learn more, see Synchronising music, pictures and videos . You can then enjoy your favourite pictures and songs on your phone, even if you're in an area with poor reception.
Of course there's a lot of music out there that might not be in your collection, and streaming lets you enjoy new stuff while you're on the go. But if your battery is running low or you can't get to a computer or a power source, avoid streaming music for long periods of time because it uses more power. If you listen to your playlists with the screen turned off, make sure that the current playlist doesn't include streaming items. And if you're not a Zune Music Pass subscriber, you can turn off Connect with Zune in the Music + videos settings.
Turn off connections you're not using
When Bluetooth is turned on, your phone checks continuously for available accessories. So if you're not using a Bluetooth accessory, you can turn Bluetooth off. For more info, see Pairing your phone with a Bluetooth accessory.
Also, if you listen to music or talk on the phone for hours, try using headphones instead of a Bluetooth device. And if you are using a Bluetooth accessory or the speaker in a call, press the Power Power icon button to turn the screen off. To learn more, see Making and receiving phone calls.
Not using games at the moment? Then you can turn off the Connect to Xbox LIVE setting in the Games settings.
Sync emails and contacts selectively
To make your battery last a little longer, try one or more of these sync-related tips:
Change the sync settings for your email accounts to a longer interval, especially for secondary accounts that you don't need to check as often. You can change the sync setting on a per-account basis. (On Start, flick left to the App list, tap Settings Settings icon, then tap Email & accounts. Tap the account that you want to change the sync settings for, tap Download new content, choose a longer interval, then tap Done Done icon.)
If you don't use any Windows Live services and don't have an email account hosted by Microsoft, such as a Hotmail account, go into the Windows Live account settings and change the default sync setting to Manually.
Choose which contacts are synchronised to your phone. If your email account doesn't include any contacts that you want to keep on your phone, you can choose to not have them synchronised to your phone. You can also keep your Facebook contacts separate from your other contacts too, which should help reduce the total number of contacts synchronised to your phone. For more info, see Social networking on your phone FAQ.
Be aware that each time you visit What's New for People and Pictures, your phone uses extra power to sync and update.
Picture-taking tips
When you've finished taking a picture, press the Back Back hardware button button to exit the camera viewfinder. (You can also press the Power Power icon button to put your phone to sleep.) When the viewfinder is active, the screen stays on longer.
Also, when it's time to upload pictures, only upload the ones you want to keep and skip the ones that aren't so great. This saves power, and saves you time later when you want to sort your pics at your computer.
Warning
Do not remove or replace the battery when the phone is turned on. If you have a spare battery, turn off your phone, then replace the battery in your phone with the spare. This helps ensure that your data is saved properly. To turn off your phone, press and hold the Power Power icon button for three seconds until the goodbye message appears and the screen goes dark.
i know about these tips. but i have never followed them. phone functionality becomes limited.
appreciate the help.
but is there a known homebrew app which messes with the battery registry??
because there was no problem before i hacked the device
garfieldncheese said:
i know about these tips. but i have never followed them. phone functionality becomes limited.
appreciate the help.
but is there a known homebrew app which messes with the battery registry??
because there was no problem before i hacked the device
Click to expand...
Click to collapse
This is why every developer insists on backing up ur device before unlocking or using any of their apps..
Even I was getting around a full day of battery backup time on browsing for half an hour,playing xblive games for half an hour, music for half an hour, calling on 3G for half an hour a day when my omnia w was new..now i get some 15hours..
Anyway most probable cause may be u have left the bluetooth turned on unnecessarily..or may be too many background apps are running..if this is the cause, goto settings, flick left/right, goto background tasks and turn off all unnecessary apps running in the background..and dont forget to turnoff bluetooth after usage..And dont overcharge ur battery, stop charging after it reaches 90-92%..
Prahlad Varada
I experienced a big decrease in battery life when using a certain custom ROM, a different ROM was a little better, but I returned to stock, which was quite normal again
prahladvarda said:
This is why every developer insists on backing up ur device before unlocking or using any of their apps..
Even I was getting around a full day of battery backup time on browsing for half an hour,playing xblive games for half an hour, music for half an hour, calling on 3G for half an hour a day when my omnia w was new..now i get some 15hours..
Anyway most probable cause may be u have left the bluetooth turned on unnecessarily..or may be too many background apps are running..if this is the cause, goto settings, flick left/right, goto background tasks and turn off all unnecessary apps running in the background..and dont forget to turnoff bluetooth after usage..And dont overcharge ur battery, stop charging after it reaches 90-92%..
Prahlad Varada
Click to expand...
Click to collapse
I have reseted my phone twice from Settings>about Phone.
i have already looked at the background settings and turned all of them off. i even turned it off in heathcliff's root tool(used interop unlock).
bluetooth was never on in the settings menu (though the option for "audio via bluetooth was toggled on in wp7root tools". but i assume it doesnt keep the bluetooth on)
-What happens is my battery shows a charge of @ 50-60% few hrs after removing from charger and then suddenly the sound for low battery plays and it "goodbyes". and doesn't turn on again. it directly goes to 1% charge and turns off!!!
-yesterday when i rebooted my phone: at the moment i switched off my phone it had 80% charge, but when i booted back on it became 1% and turned off by itself !!
something is messed up
what should i do?
EDIT: going to hard reset using *2767*3855#
after first reset
all i did was use custom accent colour after heathcliff unlock in his tool itself.
still the problem persisted
quite a few tweaks like audio via bluetooth and 3g toggle,etc don't work at all in the wp7root tools for me. they get resetted back whenever i change them and reopen the app
garfieldncheese said:
I have reseted my phone twice from Settings>about Phone.
i have already looked at the background settings and turned all of them off. i even turned it off in heathcliff's root tool(used interop unlock).
bluetooth was never on in the settings menu (though the option for "audio via bluetooth was toggled on in wp7root tools". but i assume it doesnt keep the bluetooth on)
-What happens is my battery shows a charge of @ 50-60% few hrs after removing from charger and then suddenly the sound for low battery plays and it "goodbyes". and doesn't turn on again. it directly goes to 1% charge and turns off!!!
-yesterday when i rebooted my phone: at the moment i switched off my phone it had 80% charge, but when i booted back on it became 1% and turned off by itself !!
something is messed up
what should i do?
EDIT: going to hard reset using *2767*3855#
after first reset
all i did was use custom accent colour after heathcliff unlock in his tool itself.
still the problem persisted
quite a few tweaks like audio via bluetooth and 3g toggle,etc don't work at all in the wp7root tools for me. they get resetted back whenever i change them and reopen the app
Click to expand...
Click to collapse
Just take a look at the battery terminals..i think ur battery is out..just check if any of ur frnds have a samsung exhibit 4g/exhibit 2/focus flash/transform ultra/conquer 4g..their battery fits perfectly into ur phone..just to check if culprit is the battery..if inserting their battery solves the problem, ditch ur battery and get a new one..on ebay u can get a 2500mah battery for 10USD instead of samsung's 1500mah one..As far as windows phone devices are concerned,that to 2nd gen samsung devices a hard reset(from settings>about) should solve problems like freezing on app launch, not connecting to marketplace AT ALL, etc.
Prahlad Varada
prahladvarda said:
Just take a look at the battery terminals..i think ur battery is out..just check if any of ur frnds have a samsung exhibit 4g/exhibit 2/focus flash/transform ultra/conquer 4g..their battery fits perfectly into ur phone..just to check if culprit is the battery..if inserting their battery solves the problem, ditch ur battery and get a new one..on ebay u can get a 2500mah battery for 10USD instead of samsung's 1500mah one..As far as windows phone devices are concerned,that to 2nd gen samsung devices a hard reset(from settings>about) should solve problems like freezing on app launch, not connecting to marketplace AT ALL, etc.
Prahlad Varada
Click to expand...
Click to collapse
none of my friends here have those phones . i live in india and am currently looking for the 2500 mah one. it looks cooool. hope new battery solves the problems.
Any other way i can test the faulty battery??
the link you gave don't ship here in india
- The phone doesn't seem to be reading my battery properly. are you sure its not a registry issue? Because sometimes it turns off at 50% charge but when i plug the charger it says 50% remaining. the battery is just being read wrong. is this because i unlocked my phone?
EDIT: Did a research and have noticed that my battery has swollen and http://www.jesoba.com/2013/02/all-you-need-to-know-about-cell-phone.html this guy has same problem as me.
Please Reply Urgent!
prahladvarda said:
Just take a look at the battery terminals..i think ur battery is out..just check if any of ur frnds have a samsung exhibit 4g/exhibit 2/focus flash/transform ultra/conquer 4g..their battery fits perfectly into ur phone..just to check if culprit is the battery..if inserting their battery solves the problem, ditch ur battery and get a new one..on ebay u can get a 2500mah battery for 10USD instead of samsung's 1500mah one..As far as windows phone devices are concerned,that to 2nd gen samsung devices a hard reset(from settings>about) should solve problems like freezing on app launch, not connecting to marketplace AT ALL, etc.
Prahlad Varada
Click to expand...
Click to collapse
http://www.ebay.in/itm/Battery-Sams...ries&hash=item33839481bc&_uhb=1#ht_500wt_1156 does this battery seem legit???
garfieldncheese said:
http://www.ebay.in/itm/Battery-Sams...ries&hash=item33839481bc&_uhb=1#ht_500wt_1156 does this battery seem legit???
Click to expand...
Click to collapse
if the seller saysit fits into omnia w, it should fit..and if it doesnt, u can file a complaint against the seller on ebay..theyll resolve ur issues..all third party batteries dont last as long as ur samsung original battery..what i mean is samsung promises around 800 recharge cycles for omnia w's batteries..these 'made in china' batteries last for around 400 or 500 max but they offer better backup time per charge cuz, u know, capacity is more:1500mah vs 2200mah..the life of the battery is not as much as the samsung's battery, i mean the no. of recharge cycles..hope this helps..
Prahlad Varada
prahladvarda said:
if the seller saysit fits into omnia w, it should fit..and if it doesnt, u can file a complaint against the seller on ebay..theyll resolve ur issues..all third party batteries dont last as long as ur samsung original battery..what i mean is samsung promises around 800 recharge cycles for omnia w's batteries..these 'made in china' batteries last for around 400 or 500 max but they offer better backup time per charge cuz, u know, capacity is more:1500mah vs 2200mah..the life of the battery is not as much as the samsung's battery, i mean the no. of recharge cycles..hope this helps..
Prahlad Varada
Click to expand...
Click to collapse
Will the samsung wave 2's battery fit into this??
Also i read about putting your swollen battery into the freezer helps. is it true?
garfieldncheese said:
Will the samsung wave 2's battery fit into this??
Also i read about putting your swollen battery into the freezer helps. is it true?
Click to expand...
Click to collapse
I'm 100% sure that wave 2's battery wouldn't fit into Omnia w..
And neither do I think putting your battery in freezer solves the problem..oh is ur battery swollen??one of the reason is overnight overcharging..my old phone has a swollen battery bcoz I used to overcharge it..stop overcharging and ur problems easily come down..in this situation, if I were u, I would have got the battery which u posted the link for..
Prahlad Varada
prahladvarda said:
I'm 100% sure that wave 2's battery wouldn't fit into Omnia w..
And neither do I think putting your battery solves the problem..oh is ur battery swollen??one of the reason is overnight overcharging..my old phone has a swollen battery bcoz I used to overcharge it..stop overcharging and ur problems easily come down..in this situation, if I were u, I would have got the battery which u posted the link for..
Prahlad Varada
Click to expand...
Click to collapse
I'm going to buy that one but I don't trust the seller yet. I'm looking for alternatives. I'm in touch with the seller and I am currently corresponding with him. this is the last correspondence with him
"sir. for electronics.. I generally don't accept returns because I don't see how the product was handled after the purchase. some ppl ask for returns after they have mishandled the product. hence I cannot take returns .sorry. but if you receive a dead product then certainly you can send it back.
also please note there will not be any product packaging for this just a polythene bag to avoid any damage during transit.
- ugesh_mathew"
What kind of seller sends it "in a polythene bag" without packing "to avoid damage".
garfieldncheese said:
I'm going to buy that one but I don't trust the seller yet. I'm looking for alternatives. I'm in touch with the seller and I am currently corresponding with him. this is the last correspondence with him
"sir. for electronics.. I generally don't accept returns because I don't see how the product was handled after the purchase. some ppl ask for returns after they have mishandled the product. hence I cannot take returns .sorry. but if you receive a dead product then certainly you can send it back.
also please note there will not be any product packaging for this just a polythene bag to avoid any damage during transit.
- ugesh_mathew"
What kind of seller sends it "in a polythene bag" without packing "to avoid damage".
Click to expand...
Click to collapse
Many sellers send such third party items which are small in volume in a polythene bags..that is tragic..but u can't help..according to my experience, a nice thick polythene bag is enough to support the battery against simple damages like scratches..leave alone battery..i had got a screen protector in a polythene bag..which is really heartbreaking..so cheer up and pray god ur battery won't get mishandled..
Prahlad Varada
prahladvarda said:
Many sellers send such third party items which are small in volume in a polythene bags..that is tragic..but u can't help..according to my experience, a nice thick polythene bag is enough to support the battery against simple damages like scratches..leave alone battery..i had got a screen protector in a polythene bag..which is really heartbreaking..so cheer up and pray god ur battery won't get mishandled..
Prahlad Varada
Click to expand...
Click to collapse
Thanks for the assurance. Atleast the seller seems very honest. Have placed the order and will post regarding the product.
thank you very much
EDIT:
New Battery Has solved my problems.
Now the back panel of omnia w being metallic just over the area of the battery causes my battery to be overly heated.
can anyone give any tips as to reduce heating coz of the metallic plate?? i've started to charge my battery after removing my back panel from now on. any way to prevent heating because of using 3g?? (can't remove back panel while using the phone of course )