Database Info

Installing programmes on WM2005

Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!

I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu

No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones

No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones

Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?

there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal

Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815

help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])

Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all

thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.

When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs

jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.

I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.

ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy

jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,

ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?

ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys

jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo

thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother

lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???

[Q] .NET CF Install issues

I've got a Vogue with Sprint running the official 6.1 OS.
Lately I've been having issues running certain apps. The new Facebook app and ComicReader 1.5.2 are the latest examples. Launching the application gets me this error message:
The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of the .NET Compact Framework is recommended. Support info: -2147479552 (80001000).
I have uninstalled .NET CF 3.5 through Remove Programs, but when I try to re-install, the device gives me the message:
The .NET Compact Framework version you are attempting to install already exists in ROM.
Then the installer exits.
Any thoughts on how I can get this fixed?

When you install the .net compact framework it sets a registry setting saying it is enabled and i think this is that it looks for when trying to install.
Try deleting this from the registry:
"\local machine\software\microsoft\netcompactframework"
after deleting, reinstall

joel2009 said:
When you install the .net compact framework it sets a registry setting saying it is enabled and i think this is that it looks for when trying to install.
Try deleting this from the registry:
"\local machine\software\microsoft\netcompactframework"
Click to expand...
Click to collapse
That did the trick! Thanks!
AJ

ajbopp said:
That did the trick! Thanks!
AJ
Click to expand...
Click to collapse
Well, it sort of did the trick. It worked for the two apps mentioned (facebook and comicreader) but now fails with the same error message when I try to launch FSD dialer which I just downloaded and re-installed.
sigh
~~Update: I've also discovered that I get 4 of these errors pop up on a soft reset now. I have no idea what's throwing them because so far I haven't noticed any startup items that do not work. It could be a latency issue I suppose, but I did install .NET on the device, not a storage card.

Well this is getting serious. I've uninstalled and reinstalled .NET but it's not helping. Although some programs that didn't work now do, several others like GWatch, GAlarm, DiamondTV, PianoNM, and a notepad application now do not work, and I get the same error. I find two of these missing component errors on the phone every morning, and four of them on every soft reset.
Please someone tell me I'm not looking at a hard reset...
AJ

Try this:
There is a Compact Framework 3.5 powertoy named '.Net Configuration' (see cab below). The application provides control over the .net CF on your device. Here's what you do:
- Install the CAB below (to internal memory!)
- Run '.Net Configuration' from your Start Menu
- Navigate to the 'Device Policy' tab and select version 3.5
- Select 'Apply' then 'OK'
This has worked for other issues like yours.

Yay! All better now. Thanks!

If you have problems after that config it may be your rom. Some roms have registry settings built into them and restorethem on a softreset.... just a heads up

i was having the same problem with proven 1.12 rom for touch pro and following your above advised solved the problem.
Thanks Joel once again.

Run \Windows\cgacutil.exe on your device and it will pop up a window that lists the version(s) of the .NET CF installed on your device. I assume it stands for CompactGlobalAssemblyCacheUtility, and probably reads the stuff straight out of the registry. Easier than hacking about in the there anyway.

cannot install .netconfig
stephj said:
Run \Windows\cgacutil.exe on your device and it will pop up a window that lists the version(s) of the .NET CF installed on your device. I assume it stands for CompactGlobalAssemblyCacheUtility, and probably reads the stuff straight out of the registry. Easier than hacking about in the there anyway.
Click to expand...
Click to collapse
dear forum - unfortunately i cannot install the .netconfig.cab - device keeps saying "installation failed" tried to install it on both, device and than sd-card" - so cant fix the problem?
any advice?

.net - problem
dear forum - any ideas? - need help, urgent, please

Installing .net CF 3.5 ON OMNIA I900

I am unable to install .net cf 3.5 to my OMNIA I900 as it states can not install .net cf 3.5 cab. Same when attempting to reinstall version 2. Is there a fix to this problem

there are a few versions depending on your processor type.
i will edit this post with a link to all NETCF3.5 cabs in a minute.
http://rapidshare.com/files/192391920/NetCF_v3.5_all.rar.html
download this and install the correct cab.

nir36 said:
there are a few versions depending on your processor type.
i will edit this post with a link to all NETCF3.5 cabs in a minute.
http://rapidshare.com/files/192391920/NetCF_v3.5_all.rar.html
download this and install the correct cab.
Click to expand...
Click to collapse
That's rubbish. All .NetCF versions are for all PPC. Besides WM6.1 on the omnia has .NetCFv2 built in...
U can check the installed versions and assign them with this little app.
Dirk

all this does is let you switch the default framework.
different types of frameworks depending on the cpu might have an effect if he's having problems.

i600 WM6.1 (NOKser) CAB install problem

After updating to this (WM6.1 Std. 5.2.1238.19208) cooked ROM, everything looking good.
But most of my installation CABs wont install because of "Installation was unsuccessful" error. Ive tried app unlocks with about 3 variations of Security/Policies settings, without success.
Have somebody the same complication or even solution?
Thanks in advance for any information.

I have no such problem. Today I installed all my programs from cab-files without any problems.
Try reinstall WM6.1 and use SDA Aplication Unlock.

actually, there is no problem. But when I wanna install .Net CF 3.5, yes there is a problem. I can't install it, err msg: please close other application, maximum the storage capacity. I just flash the rom and nothing was installed yet, so it totally empty (the storage). But when I install the .Net CF 2.0, it works. Does anyone have the same problem?

Why do you install .Net Framework 3.5? WM6.1 already has it.

hehehehe... shame of me... I don't know that... but thanks for telling.. , so looks like I have to uninstall the .NET CF 2.0..? Right?

I think it's better to do Hard Reset.

Maybe most 6.1 do, but my touch pro wm 6.1 came with net 2.0 and i have to install 3.5 after a hard reset. I install it then do the reg edit found here: http://pocketnow.com/how-to/tutorial-how-to-upgrade-to-microsoft-net-compact-framework-35
"(HKLM\Software\Microsoft\.NETCompactFramework) Change the DWord value of 3.5.7283.00 from 0 to 1 (thus enabling it) and all the other values (i.e.: 2.0.7045.00) from 1 to 0 (thus disabling it/them)."
As for the not being able to install a cab... I am having a similar problem.
I cannot install ANY cab. There is no programs in the uninstall programs list. (There should be around 10 programs there?!?) AND I cant seem to delete any files (get a access denied error) all I have tried to delete so far is a couple of cab files) Tried with File Explorer and Total Commander.
Does anyone have any Ideas??
Just did a hard reset. installed: task manager, advanced config, clean ram, FIM(facebook program), google maps, HTC GPS tool, phm regedit, Total commander, touch in call screen tweek,, and pocket digital clock. (above in no order) The last program I installed was Clean ram. I'm no expert but I do know my way around WM and I am totally lost on this. Is there anyway to fix this without another Hard Reset??
edit: Just gonna do a hard reset. I'll report back if I have this problem again. *sigh*

use sda unlock and you can install all you want
http://www.careace.net/2008/03/26/sda-application-unlock-download/

Apps Don't Work, Requires newer version of .net

I've tried quite a few applications but I keep getting an error that says This application requires a newer version of the Microsoft .Net Compact Framework than the one installed on this device... I can't seems to find a way to upgrade. Any help would be appreciated...

surv!vor said:
I've tried quite a few applications but I keep getting an error that says This application requires a newer version of the Microsoft .Net Compact Framework than the one installed on this device... I can't seems to find a way to upgrade. Any help would be appreciated...
Click to expand...
Click to collapse
Install the attached Microsoft .Net Compact Framework v3.5. Also do the changes below :
Use a registry editor, go to path
HKLM/Software/Microsoft/.NETCompactFramework and change DWORD 2.0.7045.00 from 1 to 0 and DWORD 3.5.7283.00 from 0 to 1.
By these, you install version 3.5 and set it as default instead of 2.0

What is the deal with CF Net 3.7? Is it the latest CF or is it a bogus program?

i needed that as well. thanks

NET CF 3.7 is for real.......
Read this thread...http://forum.xda-developers.com/showthread.php?t=525138
Have it in my custom Rom aswell.....never issues with running programmes....

Thanks for the replies, i figured out the problem, I needed to connect the phone to the PC using ActiveSync and then run the setup I downloaded to the PC.

Surv!vor, just in case...... when you use CAB files than copy them to your phone using activesync.....and run them on your phone.....follow instructions....
Success......

Frank C said:
Surv!vor, just in case...... when you use CAB files than copy them to your phone using activesync.....and run them on your phone.....follow instructions....
Success......
Click to expand...
Click to collapse
Where can you find the Cab files? What are they called?
I'm having the same problem - I bought Droppedbox but I can't figure out how to get it to work on my HTC Diamond phone. It installed but won't run - I get the error that it needs a newer version of the .net compact framework. I installed a the 3.5 framwork on the PC (NETCFSetupv35.msi) with the phone connected, but it didn't install on the phone.
Not sure what to try next.

Use a registry editor, go to path
HKLM/Software/Microsoft/.NETCompactFramework and change DWORD 2.0.7045.00 from 1 to 0 and DWORD 3.5.7283.00 from 0 to 1.
this path is in the phone? sorry for being such a noob

It's worth noting that Dropbox installed and worked perfectly on my Android tab, and on my wife's iPad, and on her Blackberry, and on our PCs. But I still can't get it to work on my Windows Mobile phone. I guess that's why people buy Android or Apple phones these days.
Just saying.