Does anyone know of a windows mobile application that will dial any number you highlight. As an example I use Handbase database application - I have been after them to put in a field that will dial the phone - it's been over 2 years I have asked for this.... to no avail. When I was Palm based Hobbysoft had a multifaceted phone app (Phone Butler)... that included a feature that if I highlighted / selected numerics and then press dial - it would dial out the number. Thanks for any info
Moved as not software release...
Related
I was working with Faria's new wm6 rom and the restore speed dial and contacts utility it has.
Some how I ended up with NO speed dials at all.
I can reenter all except position No. 1.
How to I restore the original speed dial number and position ??
I tried the operator config but no dice
In phonepad ...press menu->then options-> then press "services"
tab-> then select "voiceMail and text messaging"-> then click
"get settings"->change your voicemail and txt message service center
number. After adding voicemail # then your #1 key should let you dial
your voicemail by press/hold #1 key.
Thanks but I tried that already.
I even did it again to be sure.
But did not work.
#1 does not dial and there is no #1 i speed dial.
#2 is the first avaliable number.
Any progress on this one ? I have same problem
And even I HAVE #1 as Voicemain but there is NO phone number associated So when I press/hold "1" NOTHING happens.
Similar issue on WM5
I rebuilt my contacts database and during the clear-down process the #1 speed-dial has disappeared.
Its not listed in the speed-dials and is not offered as an option when adding a new speed-dial
I tried sending a new number to the network, which the network recorded, but it didn't create a speed-dial in #1 at all
Any ideas ?
I deleted pim.vol to clear out contacts, calendar, etc. database prior to re-syncing with Outlook and now I have the same problem.
Has anyone resolve the issue in restoring the Voicemail Speed dial #1 without doing a hard reset?
Hi,
in the old (and current I believe as well) Nokia phone - and most other pure mobile phones for that matter - you can dial a "p", typically by holding down the "*" for a while. The "p" makes the phone wait a little while before continuing to dial the rest of the number.
I need this feature!!!
I am using some prepaid phone cards for which this feature is really necessary.
So, anyone have a clue how to get a similar functionality on WM5? The "p" certainly does not work ...
Thanks in advance - Andy
if you're dialing live, you can dial only the connection number then open the keypad to dial the rest of the keycode manually. If you want to automate it, create a contact with the full number and you can enter in "p" there.
I have a contact for my voicemail which dials the voicemail and waits and the pin + #. this works great with voicecommand cause all I have to do is say "call voicemail" and it'll dial, enter in the password automatically and I don't have to touch the phone at all...
Interesting ... I did migrate all my number from my previous phone, where i had the "p" included in the number. The numbers also seemingly came up correctly on the PPC phone. However, when I tried to dial the number, it would not take the complete number with the "p" - I cannot remember exactly what it did, but it did not dial the whole thing. Thats why I thought/ hoped that there is another way. I guess, after what you are saying, I should give it another try ...
And yes, the application that you are describing is very similar to what I want to use. There is a prepaid international call provider, which has a local dial-in number and lets me call abroad for very little money. I call the local number - the service provider recognizes my account by the incoming phone number of my mobile - and then I dial the destination number. For the recognising part however, it is needed that the phone waits a little before it continues to dial the destination number.
Alright, alright .... works! Thx for the assurance! Tried it again and it just takes a lot longer - the pause is longer - than it used to be on my Nokia. Also, I do not hear the dialing tones after the "p" anymore, which probably put me off before.
Thanks! Thread closed
Try replacing the "p" with a "," . It will pause for a few seconds once the other side picks up the phone.
Hello !
Do you know how to configure the speed dial number 1 in WM6 ?
Setting the other numbers is not a problem. But for number 1, there is a problem: the setup does not allow you to change it.
Chris
Good question .
I have noticed where the speed dials settings are stored !
They are stored in the database 'pim.vol', in the table 'speeds'. I have noticed that with SKTools, but SKTools only allows you to view the database, you can not change it. Does anyone know how to modify this table ?
chris247 said:
Hello !
Do you know how to configure the speed dial number 1 in WM6 ?
Setting the other numbers is not a problem. But for number 1, there is a problem: the setup does not allow you to change it.
Chris
Click to expand...
Click to collapse
Speed dial #1 is designed to be used for voice mail. If you want to change it, goto Start/settings/personal tab/phone/services tab/voice mail and text messages and click get settings. Change the number for voice mail and click OK. It will most likely say it couldn't save the settings and to try again later. Ignore that, the speed dial #1 is now set. Open your dialer and press and hold 1, it will dial your #1 speed dial number now. Or you goto phone/speed dial and select #1. it works either way although the name will be displayed as Voicemail in the speed dial screen
10x but this is not for Windows Smartphone version.
I don't see this tabs in Settings.
Kasush said:
Speed dial #1 is designed to be used for voice mail. If you want to change it, goto Start/settings/personal tab/phone/services tab/voice mail and text messages and click get settings. Change the number for voice mail and click OK. It will most likely say it couldn't save the settings and to try again later. Ignore that, the speed dial #1 is now set. Open your dialer and press and hold 1, it will dial your #1 speed dial number now. Or you goto phone/speed dial and select #1. it works either way although the name will be displayed as Voicemail in the speed dial screen
Click to expand...
Click to collapse
You are right, it should work that way. I followed your instruction, I also had the warning popup when setting up the voicemail phone number:
"Cannot save your changes to the network. Try changing settings later, or disconnect data connection and try again."
I have no other choice than, clicking on Cancel, but I can see that the voicemail number is saved. But there is still no number 1 in the speed dial
I have WM6 Professional (a touch screen)
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero
The following Google Contacts are stored in an Android Phone for ACME Corporation:
Amy Appleseed
John Doe
Pedro Valdez
Amy, John and Pedro all share a work telephone number.
I'm working with Pedro on a project and would like to track the dates and times of our phone conversations using the call log on my Android phone.
However, even though Pedro is manually selected from the contact list, Amy Appleseed appears as the called party because she is the first contact for ACME Corporation, which are listed alphabetically.
This behavior can be consistently duplicated on a Motorola Milestone X2 (Droid X2) running 2.3.6 stock but this has been an issue on every Android phone I have ever owned from Android 2.1 to 2.3.6.
Is there any way that I can call Pedro AND have his name appear in my Call Log using Android?
I think that's just the way it works. i.e. the call log program is unaware of how the call was made--it just knows which number was dialed and at what time and resorts to a reverse look up to get the name. You can sort of see this from the way the numbers pop up...and then the names start filing in. Also, after adding a new contact for a number, the contact name magically appears in the call log.
I know its a hack, but what if you try variations on the number for your contacts with the same phone number? For example:
123-123-1234
123-1234
+1-123-123-1234
1-123-123-1234
Depending on your phone company, these may all dial the same phone number (but, you'll want to confirm that they won't charge you long distance for using 11 digits to dial a local number). With luck, they may fool Android into thinking that they're different phone numbers.
As for incoming calls, though, you may want to make a contact for just the company with a number that matches whatever your call display pops up when either person calls. There's no way it'll know who's on the other end if the call display is the same across your colleagues.
Hope this helps,
- chris
Hi cttttt,
Thanks for the response. The reverse lookup of the first contact listed for a number is understandable for an incoming call, but I would think there should be a way where dialing outbound from a manually selected contact would write the selected contact name to the Call Log.
Is this something that could be accomplished with a third party app? Perhaps a dialer with a contact look-up that rewrites the call log to reflect the selected contact (or keep a call log of its own)?
I'd appreciate the input of a developer or anyone with experience with the OS to suggest whether this can be accomplished programmatically...
Found It!
I was searching for the same thing for my GS3 and found this solution:
[Since I am new, it won't let me post the link...which is the helpful part. here is an attempt to get you the information anyway.]
souvey.com
2009/03/android-advice-shared-home-phone-numbers
Short answer: create a contact on the phone (not google/gmail), it seems to search those first.
The link gives other stuff you can do; I found the above to work quite well.
CDLaurent said:
I was searching for the same thing for my GS3 and found this solution:
[Since I am new, it won't let me post the link...which is the helpful part. here is an attempt to get you the information anyway.]
souvey.com
2009/03/android-advice-shared-home-phone-numbers
Short answer: create a contact on the phone (not google/gmail), it seems to search those first.
The link gives other stuff you can do; I found the above to work quite well.
Click to expand...
Click to collapse
Unfortunately ,that site no longer exist but I'm curios about same problem ,call log for outgoing calls shows first contact with that number
rain125 said:
Unfortunately, that site no longer exist but I'm curios about same problem, call log for outgoing calls shows first contact with that number
Click to expand...
Click to collapse
I found it by searching for the url in this web archive: web.archive.org
I am pasting the content here, in case that archive gets lost too:
Android Advice: Shared Home Phone Numbers
One of the things that has always annoyed me with cell phones is that there is no good way to handle multiple people having the same home phone number. Android’s contact manager allows multiple contacts to share the same number (because the database is not indexed by phone number, like on many older phones). This still wasn’t perfect for me, however. When a phone number shared by multiple contacts calls, the first match (sorted alphabetically A-Z) is displayed on the caller ID screen and in the call log. Fortunately, this consistency means we can manipulate the system to display a custom name. The following steps illustrate the technique:
1. Lets say we have a theoretical family: John and Jane Smith. They each have a cell phone, but live together and therefore share a home phone number. They each are added in Android with their mobile number as their primary number, and their home number as their secondary number. Both can be called at either their home or mobile number from the contact list. When a phone call is recieved from their home number, Jane Smith is displayed in the caller id and call logs because she is first alphabetically.
2. For this technique to work cleanly (without any additional clutter), you must have your Android contact manager set only to display “My Contacts” (this settings is under Contacts > Menu > Display Group > My Contacts)
3. Log into Gmail and switch the contacts view
4. Create a new group to put these combined “metacontacts” (I called the group “Metacontacts”)
5. Force your G1 to synchronize contacts (Home Screen > Menu > Settings > Data synchronization > Uncheck and then recheck “Contacts”)
6. Tell your G1 to synchronize this new “Metacontact” group (Contacts > Menu > Edit sync groups > Check “Metacontacts”)
7. On your Gmail Contact Manager, in the “Metacontact” group, press the new contact button (person with a +)
8. Enter the name you want to display when the number calls (ex: “The Smith Family” or “John and Jane Smith”)
9. Add some form of symbol in front of the contact’s name to cause it to be first alphabetically. I used a period because it takes up the least space, and then put a period at the end as well for symmetry ( .The Smith Family. )
10. Add the shared home phone number to this new contact
11. Press the save button
12. Press the “Groups” button and then click “Remove from… My Contacts”. This will prevent the contact from showing up in Android’s contact list, but because we chose to synchronize the “Metacontacts” group, it will still be in Android’s database when it does a caller ID lookup.
13. Repeat steps 7-12 for each custom home phone number contact
14. Force your G1 to synchronize contacts again (Home Screen > Menu > Settings > Data synchronization > Uncheck and then recheck “Contacts”)
15. The new custom contact name will now show up in the call logs and when the number calls, but each individual contact (ex: John and Jane) will still have the number stored, so you can call their home number by clicking their name in contacts.
It works almost perfectly for me, but there are few caveats to this method that you should be aware of:
Every time you change the combined contact (“metacontact”), it automatically readded to the “My Contacts” group and you will have to remove it
The combined contact (“metacontact”) will have the symbol you chose (in my case, a period) in front of their name, so if this bothers you, this isn’t the technique for you