Related
wm5 version:
http://download.msi.com.tw/support/swr_exe/cmu_swr/MSI_PPC50_0510.exe
wm2003 version:
http://download.msi.com.tw/support/swr_exe/cmu_swr/MSI_PPC42_0509.exe
open the software, swith your headset to pairing mode, and select option -select device- refresh- ok
and then add sounds and enjoy.
but there is such a pity that Blueplayer doesn't support headset other than MSI headset. It can only play 30 second per music.. Seems it has an MAC limited, hope someone will make a crack soon.
If this is true, then it might be possible to reverse the app and rip out the bluetooth record and create a new generic profile..
Does the music play on any headset for 30 seconds? If so, that should be quite easy to crack.
V
any headset except the MSI headset
So any headset works for 30 seconds?
V
yes you r right
I had test the programme with my i tech clip s35,it only could play 30s.it there any crack file?
waiting for the crack!
any cracks now? or anybody has a plan to crack this?
waiting
I'm looking at the program right now. A couple of things: Wow, it's big at 3MB! I noticed two files, CHS.dll and TW.dll. My guess is that these are additional language files for Chinese and Taiwanese, considering the origin of the company. It may be safe to remove it, saving 2MB!
If you can't get the program to launch properly, and it comes up with an "MPOBCE: !pl2CAPLoad. 1062" error message, you have to perform a soft-reset and try again.
In theory, if you're looking for a 30-second time-limit, a simple hexidecimal string you could be looking for is "1E 00." Of course, the file is replete with this string, so it could just be a matter of time until you find the right one. Once you do find the right one, you could change it to "FF FF" meaning 65,535. That will make the time limit 65,535 seconds = 1,092 minutes = 18.20 hours time allotted per playback. Sounds feasible?
I have a Bluespoon AX2, but no Bluetooth Stereo Headset, and it doesn't seem to want to pair it. It detects it during the scan/refresh, but there's nothing I can do afterwards, can't enter a PIN or anything.
Blueplayers time limit for non MSI headphones
BeyondtheTech wrote:
In theory, if you're looking for a 30-second time-limit, a simple hexidecimal string you could be looking for is "1E 00."
Click to expand...
Click to collapse
That sure is too simple. Who says that it isn't 31 secs or min/60 or hr/3600. That would result in different codes.
I checked the disassembled code but didn't come further than turning off the popup bubbling: "This player is only for MSI-headsets". No clue where the limit is coded (but on the other hand: I'm not asm expert).
The real hardore coding boyz should be able to make a workaround. But maybe there is no interest.
All in all there is the question what BluePlayer makes better than WMP.
Blueplayers time limit for non MSI headphones
BeyondtheTech wrote:
In theory, if you're looking for a 30-second time-limit, a simple hexidecimal string you could be looking for is "1E 00."
Click to expand...
Click to collapse
That sure is too simple. Who says that it isn't 31 secs or min/60 or hr/3600. That would result in different codes.
I checked the disassembled code but didn't come further than turning off the popup bubbling: "This player is only for MSI-headsets". No clue where the limit is coded (but on the other hand: I'm not asm expert).
The real hardore coding boyz should be able to make a workaround. But maybe there is no interest.
All in all there is the question what BluePlayer makes better than WMP.
Re: Blueplayers time limit for non MSI headphones
DTR said:
BeyondtheTech wrote:
In theory, if you're looking for a 30-second time-limit, a simple hexidecimal string you could be looking for is "1E 00."
Click to expand...
Click to collapse
That sure is too simple. Who says that it isn't 31 secs or min/60 or hr/3600. That would result in different codes.
I checked the disassembled code but didn't come further than turning off the popup bubbling: "This player is only for MSI-headsets". No clue where the limit is coded (but on the other hand: I'm not asm expert).
The real hardore coding boyz should be able to make a workaround. But maybe there is no interest.
All in all there is the question what BluePlayer makes better than WMP.
Click to expand...
Click to collapse
Any expert cracked this software?? I'm very desirous to find out a solution for my 818pro. Thxxxxx
I dunno... despite having to convert everything to wma and wmv... I can't complain about WMP.
Jed - the piece they're interested in is the apparent 'A2DP' profile. A2DP allows for, among other, stereo audio to bluetooth audio devices. The default profile with Windows Mobile doesn't allow this. It was present in a Qtek test ROM, but it was removed again for the final AKU2 ROM. It may be back in AKU2.2 once whatever issues they found are addressed.
Overall...
If you're not using a bluetooth audio device, you won't care
If you do, but it's a mono device, you won't care
If you do, and it's stereo, but you don't care about stereo sound - duh
Has anyone been able to get this working on a Wizard? I have an Imate KJAM and since Imate is retarded and ripped the A2DP support out of their lastest firmware update, I am still looking for a stereo bluetooth solution.
I tried installing it and it seems to run ok, but after I pair it with my stereo bluetooth headset and press the PLAY button, nothing much happens, my headset LED changes to paired mode, but the time counter doesn't start incrementing and I get no audio. Not sure if it's my Bluetooth Stereo headphones or the KJAM. Any ideas?
I also try this program in my eten m500 & It's work.
However I think this 30 second problem 's not the limit of time. It's limit of song's length. since I try to play my ringtones that shorter than 30 second continously 3-4 song ( It mean 2-3 min.). It can run without any error. The error will be shown when any song run to 00.31
Paladin27 , I think you have to check in option- select device , I think your bluetooth device still not in the list.
ZeBoxx said:
Jed - the piece they're interested in is the apparent 'A2DP' profile.
Click to expand...
Click to collapse
Um, I know. I was wondering why people seem so adamant to NOT use WMP when it seems to do the job just fine with an updated BT stack.
Hey guys-
I'm running My Mobiler to output the display, and control my phone (Tilt/Kaiser/TytnII/8925) via my PC (XP sp2).
When I receive a call, My Mobiler allows me to accept/reject/sms etc through my pc (really through my phone dialer but I'm using my keyboard and mouse), but when I want to accept the call, and talk to my caller, I'm having to pickup the phone, and resort to what I'll call 'untethered' phone use (i.e., phone to ear/BT headset).
What I'd like to do (and hopefully where you guys can help me out) is to use some method or software to relay the call through my PC (and use my pc's built in speakers & mic). Bonus if the method leverages something I'm already running (ActiveSync/My Mobiler).
Additional info:
BT is an option, but it's Toshiba stack, which from my researching doesn't' seem to support the Headset profile on PC.
Thanks
well if your pc has bluetooth it should be able to work....i have a usb to bluetooth adapter for my pc and i can get the audio going to it never tired to use a mic or use my pc as a speaker phone but 1 thing for sure the audio from calls go on my pc....if i had a mic i would test it out...also as another option(if your phone has it.) u could just use speaker phone...
Grondinm said:
i have a usb to bluetooth adapter for my pc and i can get the audio going to it
Click to expand...
Click to collapse
What's the make/model of the USB BT you're using?
Mine is:
Toshiba Bluetooth Stack for Windows
Version v5.10.15
When I pair up the profiles displayed on the tilt are:
A2DP: Advanced Audio Distribution Profile
SPP: Serial Port Profile
The profiles in the Toshiba BT manager are:
DUN: Dial-Up Networking Profile
LAP: LAN Access Profile
If I use my BT headphones (Sonorix C3) with MortPlayer, A2DP works, If I try to use the Toshiba USB BT it doesn't work.
I think the one I need is (either)
HSP: Headset Profile
or
HFP: Handsfree Profile
I'm suspecting the toshiba bt stack is to blame, anyone else able to use a toshiba stack and get HSP/HFP working on their PC?
Im currently using My Mobiler to use my VOX due to having removed the broken screen from its shell
whenever i take a call, all i do is put it on speakerphone and it works fine
using the computers speakers and mic would be great fun, but for me its impossible due to the bluetooth dongle i use not having any compatible (free) software that uses audio streaming, but if it did, audio streaming should work with both speakers AND a mic! so it should in theory work.
i think
cris_rowlands said:
whenever i take a call, all i do is put it on speakerphone
Click to expand...
Click to collapse
Grondinm said:
u could just use speaker phone...
Click to expand...
Click to collapse
Speakerphone isn't an option, I'm in an office and the sharing of my conversation with my coworkers via loud speaker wouldn't be appreciated.
I intend to use a headset+mic combo hooked up to my pc, this way I can listen to music off my pc, and handle calls.
flow would be:
[Phone]<--display&control(via My Mobiler)-->[KVM - PC]
[Phone]<--voice*(Need solution here)*-->[MIC & Headset - PC]
Salling Clicker Is on the road to what I'd like to do, although it doesn't have voice support under windows. It's on the road to PPC <> PC convergence.
Any one have any experience with tweaking Salling Clicker to work with voice?
thetiltedKaiser said:
What I'd like to do (and hopefully where you guys can help me out) is to use some method or software to relay the call through my PC (and use my pc's built in speakers & mic). Bonus if the method leverages something I'm already running (ActiveSync/My Mobiler).
Click to expand...
Click to collapse
When I paired my MDA Vario III with my notebook (HP TC4200 Tablet PC running a Broadcomm BT stack) I had a "Voice gateway" service available from my phone. This is in addition to DUN and Network Access Point services. Basically when I PC and phone connect my PC acts as a BT speakerphone.
I've not used the setup that often but it seems to work pretty well. When 1st connected a pop up briefly appears to inform me that the "Call Monitor" is active and that's it til a call comes in. At that point a notification gets displayed saying the number or callerID with buttons for "Accept & "Reject". If I take the call, or transfer and active call to the BT headset then my PC picks up the call.
By default my notebook uses its built in loudspeaker and microphone. However I can also pair my PC with a BT headset then route all sounds through it. It's a bit of a faff though as I have to change the active sound device to whatever headset is connected. I also need to connect the PC and eadset 1st if the headset is also paired with the phone, otherwise the real BT headset may take the call instead of the "virtual" one (notebook). I haven't tried this with my BT stereo headset though, only my conventional mono...
Whilst playing during a particularly boring teleconference I also discovered that I can record the calls and pass the sound through a text to speech converter supplied with the PC... the results of the latter are more for entertainment than serious use, althoug I suppose with some training it might be better...
I also use Salling Clicker. The phone events work pretty well, but to date I've yet to take a call using the PC whilst it is running.
Not sure if this helps in your case, but it seems like what you want to do is definitely possible.
Fatman it's like you've taken a page right out of my book. What software are you using for speech to text? This could make for a useful and entertaining audit trail... Sounds like I need to pickup a new BT adapter based on the Broadcomm stack. If anybody has had any luck using the Toshiba stack, please share.
thetiltedKaiser said:
What software are you using for speech to text?
Click to expand...
Click to collapse
I'm not sure if the program is available as separate software. It's called "Microsoft English Recognizer" and was pre-installed on my notebook. I have no idea how it compares to any other programs. I've only playted around with it very briefly as a way of killing time during a boring teleconference!
However, I can't see why any program couldn't be used as the sound from the phone is available to any software as the BT stream from the phone becomes the default input sound feed.
One thing I will definitely be trying next time is recording the call whilst taking notes using Tablet Enhancements for Outlook. THis basically augments the normal MS Outlook Journal functions so I can take handwritten notes which can be edited, commented, and then later searched. If you record the microphone feed (i.e. the phone call in my case) the notes are then linked into "timeline" of the call so you can see what notes were taken when, and conversely what happened in the call when you took a particular note... should be useful if it works...
Let me know if you need any additional info about BT stack versions and drivers etc but it does sound like you'd need the Broadcomm stack - ISTR reading that the Brioadcomm stacks on some PocketPCs have laways performed better than the MS equivalents, and it appears that the same if true for PCs too... The BT on my notebook is far more reliable, and flexible than that on my work PC which uses an MS BT dongle. However, that may be due to the fact that the BT on my notebook is built in and not USB...
Good luck!
found this:
Bluesoleil
http://www.bluesoleil.com/download/index.asp?topic=bluesoleil6x
It has a Dialer plugin.
Have not tried it yet but if someone has please let us know.
Has anybdy tried this yet?
http://www.samsung.com/us/consumer/...index.idx?pagetype=prd_detail&tab=accessories
Just wondering how it worked. Too bad it's not HDMI.
I tried it, worked for me. You have to enable it first in the TV-Out settings, and the yellow wasn't really the video one on my cable.
yea, there was a video somewhere showing it working. Just buy a $3 3.5" to RCA cable from ebay or radioshack
Seached on Google and Amazon has one for $1.29
http://www.amazon.com/DCR-TRV50E-DCR-TRV900-DCR-TRV950-DCR-VX1000-DCR-VX2000E/dp/B003V8UB4I
Going to give it a try.
Worked fine for me, no problems at all! Quality was only OK but I'll try it again with a different video and see if that helps.
Is there a way to go from micro USB to HDMI or the jack to HDMI?
For the usb, no it has to have the wardware. For the jack, whats the point? The jack can only output standard definition video and going through hdmi would be pointless. You can use WiFi with DLNA to windows media center to play your HD.
caelestis2 said:
For the usb, no it has to have the wardware. For the jack, whats the point? The jack can only output standard definition video and going through hdmi would be pointless. You can use WiFi with DLNA to windows media center to play your HD.
Click to expand...
Click to collapse
except that I can't get DNLA to work Maybe I'll try another app that does the same as allshare
the video out works well, I'm glad that it doesn't use HDMI as I use it in my truck to my DVD/NAV system. It does seem that whenever I've connected the included ear buds to the phone I've had to go into settings and re-enable video out. No it's not high definition, but the quality is more than adequate for my purposes.
Battlehymn said:
the video out works well, I'm glad that it doesn't use HDMI as I use it in my truck to my DVD/NAV system. It does seem that whenever I've connected the included ear buds to the phone I've had to go into settings and re-enable video out. No it's not high definition, but the quality is more than adequate for my purposes.
Click to expand...
Click to collapse
I plan on doing this exact same thing this weekend. I have the Alpine IVA-W205, and I think it would be cooler to have audio and video instead of just audio. Plus, I can actually see the navigation directions since I don't have Nav installed.
tikicult said:
I plan on doing this exact same thing this weekend. I have the Alpine IVA-W205, and I think it would be cooler to have audio and video instead of just audio. Plus, I can actually see the navigation directions since I don't have Nav installed.
Click to expand...
Click to collapse
Mine is a kenwood DDX-8019, and I have the external NAV
A couple things to keep in mind if you are going to use the phone as a NAV device in your car ...
1. Get long enough cables that you can set your phone where it has the clearest view of the sky possible. I set mine in the tray molded into my dash. Which leads to ...
2. If you use the included micro USB cable with a power adapter you should be fine, but the door that hides the connection on the phone may be too small for many aftermarket cables. I have one that is fine at home, but doesn't provide a secure enough connection for me to trust it on the road.
3. Maps in my area are not 100% accurate, the parking lot where I work used to be part of a highway that has been re-routed, however the map does not reflect this. I have also found that on the 2 times I've tested it on my route to and from work that it will not give a route that includes HOV lanes. (there may be a setting for this)
4. Download the app and enable the turn by turn voice ... but do not rely on it, until you've had some time to get comfortable with it. I've found during my testing that voice prompting comes a bit later than I like at highway speeds, though in and around town it was fine. I don't know if your DVD reciever will allow you to, but I can display the video from the phone and listen to audio from any other source I have available.
5. The only way I have been able to take a call while using the video out function on the phone was to disconnect the 3.5mm jack, it seems that the audio from a phone call is muted, as is the microphone. I guess if it did work there would be no reason for anyone with an aux video connection to buy a bluetooth reciever.
I do not intend to use this as my primary NAV in my own vehicle because my GARMIN reciever is purpose built for it and is far more precise/has more options. BUT ... I will not be renting anymore NAV units from enterprise when I have to travel.
Hi fellas,
I fly FPV and I wanted to use my Infuse to record the AV footage by splitting the video cable which goes to my monitor to my hdmi chord/dongle for the infuse.
The AV equipment has low resolution 640x480 if I'm lucky.
Would this idea work? There is no audio as my transmitter does not have a mic but If I could use a screen capture software on my phone to record my flights that would be fantastic. Is this possible? To use the HDMI dongle as an AV in to stream live video on my phone (assuming there is an app) basically using my phone as a DVR.
Thanks for any helpful response.
no but it would be cool to use a transmitter as reciever.... I mean if a PC needs a dedicated video capture device rather than the monitor-out going both ways then why would a cell phone be likely to work like that? if USB hosting gets figured out in the kernel and a USB video capture device was used the sure but the mhl is a 1 way device as far as anyone knows.
you may as well get a laptop and usb video capture card then copy the file to the phone.
Guess the laptop is as good as any it's a shame though
The transmitter that I was talking about is the transmitter on the aircraft transmitting the image which is being viewed on a monitor
I destroyed my gopro in a crash so I was looking for alternate solutions without having to buy anything as I am dirt poor
thanks a lot for your input
Does anyone know of a way for the camera to record video and use the Bluetooth via headset for audio? Or any other cheap wireless mic solution that will work with on an android phone and doesn't require recording audio and video separately? Thanks
TheEnternal said:
Does anyone know of a way for the camera to record video and use the Bluetooth via headset for audio? Or any other cheap wireless mic solution that will work with on an android phone and doesn't require recording audio and video separately? Thanks
Click to expand...
Click to collapse
Bump
TheEnternal said:
Bump
Click to expand...
Click to collapse
If you connect your BT headset it still records from it's normal mic?
laurensschu said:
If you connect your BT headset it still records from it's normal mic?
Click to expand...
Click to collapse
It does, I just ended up using a wired mic with another camera
laurensschu said:
If you connect your BT headset it still records from it's normal mic?
Click to expand...
Click to collapse
Yes. The camera app only records from the internal mic. I really need a wireless solution that allows me to have the microphone several meters away to record the sound. I could only find wired solutions and they were not even for android.
I think I've got it!
so, I've been trying to do this exact same thing for about a week now, and I think I've got it. with the help of some random people on the internet.
it seems this is actually a two part problem.
1) get the device to recognize the bluetooth microphone (from a headset or other bluetooth wireless device).
2) get the audio into a video recording.
it seems that android and an OS is not readily prepared to do either of these, and the built in video recorder cannot use audio from a source other than the devices built-in microphone.....so....we have to improvise a little.
First, we will need to get android to play nice with the bluetooth device. start by installing a free little app called "bt mono" you can find it on the google play store.
once installed you will need to run this any time you want to use your bluetooth device in a way other than as a phone.
on a side note, this works great for listening to music via a bluetooth headset.
second you will need a video recorder that can take the audio input that bt mono gives you. so, run back over to the google play store and get "lgCamera"
the only thing you have to do now is tell lgCamera that you want to use the "microphone" as the audio source.
thats it. you now have a video recorder on your phone/tablet that will use "almost" any bluetooth device as the audio input.
I have this exact set up on my Verizon Samsung Galaxy Nexus with CM 10.1.0 rooted, and it works perfectly. I am not sure if this works with unrooted devices, though I don't see why it wouldn't. hope this helps anyone who's been dredging the depths of the interwebs!
very special thanks to david hadaller and to Warren Barton for the breakdown and links!
joeypent69 said:
so, I've been trying to do this exact same thing for about a week now, and I think I've got it. with the help of some random people on the internet.
it seems this is actually a two part problem.
1) get the device to recognize the bluetooth microphone (from a headset or other bluetooth wireless device).
2) get the audio into a video recording.
it seems that android and an OS is not readily prepared to do either of these, and the built in video recorder cannot use audio from a source other than the devices built-in microphone.....so....we have to improvise a little.
First, we will need to get android to play nice with the bluetooth device. start by installing a free little app called "bt mono" you can find it on the google play store.
once installed you will need to run this any time you want to use your bluetooth device in a way other than as a phone.
on a side note, this works great for listening to music via a bluetooth headset.
second you will need a video recorder that can take the audio input that bt mono gives you. so, run back over to the google play store and get "lgCamera"
the only thing you have to do now is tell lgCamera that you want to use the "microphone" as the audio source.
thats it. you now have a video recorder on your phone/tablet that will use "almost" any bluetooth device as the audio input.
I have this exact set up on my Verizon Samsung Galaxy Nexus with CM 10.1.0 rooted, and it works perfectly. I am not sure if this works with unrooted devices, though I don't see why it wouldn't. hope this helps anyone who's been dredging the depths of the interwebs!
very special thanks to david hadaller and to Warren Barton for the breakdown and links!
Click to expand...
Click to collapse
You are right! Tks!
Hi bud...
did you find any solution-for phone camera to record video and use the Bluetooth via headset for audio?
i looking for same too Sam.Note4 but no luck so far
Yes. lgCamera and BT Mono works on android. It properly records the video from the phone and the audio captured from my Nokia HS-3W Bluetooth Headset.
Tested with Sony Ericsson LT18i.
Cinema FV-5 has a setting for audio source, and BT works
The only problem - 'cinema fv-5' doesn't seem to utilize the front camera, only the main one.
(can't post the link, search on play store for 'cinema fv-5')
Hello. I kinda worked for 3 secs then it automatically switch back to internal mic.
I have level u headphone and note 5. Is is there anyway to make it stay?
is there any solution that we could hack the OS to make external Bluetooth Mic recognised by the native video camera app in the android phone? its so silly that if you try for example "Open Camera" app from play store the external mic works fine. But i am interested to use the native Camera app for video recordings
any thoughts or feedback will be much appreciated!!
Cinema FV-5 Front Camera
To utilize the front camera on Cinema FV-5 swipe from Left to Right.
If you swipe the left menu bar to the right it will switch to the front camera.
This is documented NO WHERE in the user manual. I found it when I purchased the Camera FV-5 app. On a pop-up instructional screen it said to swipe the left menu bar from left to right to engage the front camera. The photo camera version also has an icon on the right menu bar that switches the photo camera to the front camera but there is no icon nor instructions for the video camera.
It works. Cinema FV-5 works excellently with any bluetooth headset to record audio on video from the BT headset. Just make sure to have the BT headset connected before you open Cinema FV-5 or there may be connection issues to the app.
These are some of the videos that use audio from the BT headset around my neck.
The videos are on YouTube, just paste the ending part below at the end of YouTube.com i.e. /endingpart
u4MWMJaahQw
Kax1yrnQkws
K1SdKe-TAbo
oSD6wklTpQM
An in-ear headset is actually clearer and I've just switched to that type of BT headset but I don't have any of those uploaded at the time of this posting..
UPDATE: Although the swipe left to right will switch to the front camera, the BT audio does not work with the front camera, only the rear camera. Perhaps Cinema FV-5 will fix this with a future update.
Hi guys, we could manage this function through the btmono app, up to version 8. Today, we are at 11 and the situation has not changed .. They say for safety but I cannot give up this solution and I remain at 8.
Do you guys who got this to work with BT Mono and lgCamera have a link to the playstore lgCamera app? I searched it but could not find it. Thanks!
jhqt said:
Do you guys who got this to work with BT Mono and lgCamera have a link to the playstore lgCamera app? I searched it but could not find it. Thanks!
Click to expand...
Click to collapse
I also do not find it on playstore. Probably it is outdated. I can only see it on apkpure https://m.apkpure.com/lgcamera/rubberbigpepper.lgCamera