Related
Quick review, sorry I don't have batteries for my digital camera right now, so no pics.
What I bought - I bought a "Crystal Gel TPU Case" in the glossy black variety. The case is flexible, but it keeps it's shape like a hard plastic case. I wanted this type of fit because I had a hard plastic case from the same company and it was damn-near impossible to get off when I had to pull my battery one time.
I paid $8.99 + free shipping. They do have some on sale for less.
The Company - They had contacted me on Twitter at one point, one of those advertisement Tweets. The key was, they offered me free shipping on their products using the code "twitter". So I figured I'd give them a go.
So far, after two orders, I'm pretty pleased. The second order did take a day longer than the first to have processed before it shipped, but I knew from receiving my first order that they were a home-based, small time ordeal by the packaging the first case I ordered came inside (hand-written address and what-not).
Shipping took 3 days both times. I'm in VA, I think the company is in Jersey.
Fit - Fit's perfectly. It's not too tight like the hard plastic cases out there, and it's not loose at all, nice and snug.
Protection - Not the best. You basically get outer case protection, and I would imagine that it's not as good as a hard plastic case.
Look - I bought the glossy black case, which I thought would be a dust and finger print magnet, but it's not too bad.... for dust that is. It does get smudges, but it's a case, I'm not too worried about it.
Overall - 7/10 Good buy for the price. You can get free shipping using the coupon code "twitter" at checkout.
Check them out - cimousa.com
I bought something similar called the Crystal Clear Case off of ebay. About the same price with the same checkerboard pattern on the back of it and I can tell you that it will turn yellow after a couple of months like old plastic does . It's not like a rich yellow but you can see where it starts tinting yellow. I didn't even bother asking for a replacement since it was through eBay and I don't think they'd do it anyways.
Well, GL.
I'm sure it could do that, It's very cheap. I'm buying a case mate case for my n1 after I have enough money to justify a $30 phone case lol
jerhoyet said:
Quick review, sorry I don't have batteries for my digital camera right now, so no pics.
What I bought - I bought a "Crystal Gel TPU Case" in the glossy black variety. The case is flexible, but it keeps it's shape like a hard plastic case. I wanted this type of fit because I had a hard plastic case from the same company and it was damn-near impossible to get off when I had to pull my battery one time.
I paid $8.99 + free shipping. They do have some on sale for less.
The Company - They had contacted me on Twitter at one point, one of those advertisement Tweets. The key was, they offered me free shipping on their products using the code "twitter". So I figured I'd give them a go.
So far, after two orders, I'm pretty pleased. The second order did take a day longer than the first to have processed before it shipped, but I knew from receiving my first order that they were a home-based, small time ordeal by the packaging the first case I ordered came inside (hand-written address and what-not).
Shipping took 3 days both times. I'm in VA, I think the company is in Jersey.
Fit - Fit's perfectly. It's not too tight like the hard plastic cases out there, and it's not loose at all, nice and snug.
Protection - Not the best. You basically get outer case protection, and I would imagine that it's not as good as a hard plastic case.
Look - I bought the glossy black case, which I thought would be a dust and finger print magnet, but it's not too bad.... for dust that is. It does get smudges, but it's a case, I'm not too worried about it.
Overall - 7/10 Good buy for the price. You can get free shipping using the coupon code "twitter" at checkout.
Check them out - cimousa.com
Click to expand...
Click to collapse
Actually i think the soft case would have better protection. hardcases just transmit the force right through with little dampening but the soft rubber/plastic would absorb a lot of the impact.
I like the tpu case more because the silicone stuff attracts lint and doesnt slide in and out pockets as well. They also dont stay on as well a a good tpu case.
i ordered one up also....great price $8.60 CAD includes shipping
Over been using this case for about a month now and I have nothing but great things to say about it. The fit is great and it doesn't add too much bulk. The argyle pattern on the back is beautiful too. I love the smoked color and how its partially see through which allows me to put my contact information on a sticker on the phone and have it show through; 100000X better than an engraving. And you can't beat the price, I think mine was about 8 or 9 bucks with shipping!
I ordered from this seller and couldn't be happier. Its the best case available for the Epic imo.
You can buy it now for $8+shipping or do what I did and use Auctionsniper. I picked mine up for $7 shipped. Sprint stores sell them for $19.99
http://shop.ebay.com/i.html?_from=R...+Case+BLACK+CZY0986&_sacat=See-All-Categories
Your link takes you to all categories on eBay.
Edited OP ^^^^^^^
I personally have that case, its absolute horse ****. The tabs on the case snap off or wear down. The back rubber area is held on by cheap adhesive, and starts to peel off. I've had this case for 2 months and its falling apart. Theres a reason why its so cheap, its because its garbage.
these are definitely not otterbox cases.
It looks like this: http://www.igear360.com/2010/09/01/review-sprint-protective-cover-czs6842r-for-the-samsung-epic-4g/
Which as stated above is not an otterbox.
I have one too. The case itself is alright, nothing fantastic. Good deal for $8
It makes the phone a helluva lot bigger (to be expected), but it does stop my screen from wobbling, so that's a huge plus.
I'd also like to point out that it isn't Otterbox.
http://www.otterbox.com/samsung-epic-4g-cases/samsung-epic-4g-cases,default,sc.html
The case being sold in those auctions is the same as the one on the Sprint website, take a look and compare.
I'm using the RF one from BestBuy. I'm thinking of getting a cheap rubber one and seeing if I can cram the RF one in for actual protection lol. I'm curious, what are you using?
I just ordered one for my sons triumph on Amazon..its a rubberized plastic black one I do believe.. should be in sometime this week. Didn't really like the one from best buy & had a hard time finding a decent one because none of the ones I found shipped until the 15th but they're all pretty much the same.. and only like $6 or $7 bucks plus shipping. Probably not the best but its better than nothing...
I bought one of those $6 black silicone cases from eBay and I'm very happy with it. The power button is easier to press now and I don't accidentally hit the volume buttons all the time (though they're also easier to press when i need them.) I didn't have to cut anything like some people have reported, as all the mic/speaker/led holes are in their proper places. Quality is about on par with the [much more expensive] Marware case I have my old iPod in.
I don't like cases so I ordered a neoprene pouch off ebay.. it looks exactly like the one for the nexus one if you know what that looks like.. good to protect the phone when it's in my pocket
http://www.flickr.com/photos/danielgreene/4254408553/
I went ahead and slurged for the Rocket Fish case over the weekend, pretty happy with it: nice, tight fit and adds very little bulk to the phone. The phone still fits in my leather belt pouch. The case rounds out the Triumph's corners and gives the phone a surer grip. I am much more comfortable carrying my $300 phone around now and I'm very glad I bought the case.
I still wish that Otterbox would come out with a case for us, but the Rocket Fish will do for now.
Motorola Triumph Rubberized Hard Protector Case - Smoke Diagonal Checker
I can't post a link due to me being a new member but search " Motorola Triumph Rubberized Hard Protector Case - Smoke Diagonal Checker " on Amazon.
I received the shipment on time as the order said it would. I opened the mail package to find a very sturdy case with a comfortable soft touch with a bit of grip. Not too much grip that will make it grip to anything; additionally, exactly enough comfort to feel durable and comfortable at the same time. I expected a cheap plastic case with no grip. I am very surprised from the seller on such a great price and product quality. Highly recommend this to first time buyers, or to whom loves their phone enough to spend $4 on keeping the phones appearance and quality at a high rate. Kudo's to the seller. =]
-Clint
I have the same one.
TheFlyingDharma said:
I bought one of those $6 black silicone cases from eBay and I'm very happy with it. The power button is easier to press now and I don't accidentally hit the volume buttons all the time (though they're also easier to press when i need them.) I didn't have to cut anything like some people have reported, as all the mic/speaker/led holes are in their proper places. Quality is about on par with the [much more expensive] Marware case I have my old iPod in.
Click to expand...
Click to collapse
Mine was only $3 and i really like it. Easy to take off, really sticky and protective.
I bought two cases off amazon, both of the same brand from different sellers. The transparent smoke plastic case is crap. The black plastic is very nice, it feels stiff, it's just tacky enought to give it a good grip but not stick in your pocket, and its got a bit of springiness to it. Not bad for 5 clams. I'm sure an otterbox would be a lot nicer and tougher, but spending 40 bucks on a case to protect a 220 dollar phone? No.
i am using nillkin tpu case with free mofi pouch，I can insert my phone with tpu case into pouch.i like it
Motorola WX435 Triumph Rubberized Shield Hard Case - Neon Green
Bought it on Amazon.
Snaps right on the phone, is snug and sturdy
TCP gel cover. On my infuse and the rest of my family use it aswell. Very good quality.
Sent from my SGH-I997 using XDA App
The case I use
I use the Rocket Fish case. I have dropped the phone like 15 times, and the phone is still fine. All the case seems to do is prevent cosmetic damage. The phone is solid as, excuse the pun, a brick.
I am using a cheap black silicone rubber case I found on eBay.
iPhone Trash
I am so sick of ipone this, iphone that. Everybody makes sweet cases for the iphone but leave out the android guys for some reason. Can't these manufacturers think outside of the apple bullcrap. I guess not, that's why android users are stuck with cheap lazer printed plastic junk that wears off within a few days of handling the case. Oh well, I am still a happy android user. till next time.
1031917104 said:
I am so sick of ipone this, iphone that. Everybody makes sweet cases for the iphone but leave out the android guys for some reason. Can't these manufacturers think outside of the apple bullcrap. I guess not, that's why android users are stuck with cheap lazer printed plastic junk that wears off within a few days of handling the case. Oh well, I am still a happy android user. till next time.
Click to expand...
Click to collapse
the thing is, with iPhone's they only have to make 1 to 2 depending on how they make the cutouts (since cdma and gsm versions have a bit different button placement). With android there are 30+ phones for every version of the iPhone. And prepaid carriers usually don't get the best of the cases... At least zagg makes screen protectors for every or near every recent android phone. It would be nice if they made a case for each phone, but that doesn't happen.
I have a pretty good case on my Triumph, it's a snap on but it's durable & don't look bad either.
Honestly, I've been using mine without any kind of case, and it's great! I've owned several phones and an Ipod touch before this that were awful without cases due to the shells being slippery, but the Triumph has a grippy rubberized exterior that feels great in the hand. Unless you drop your phone a lot, I wouldn't bother with a case.
I got a Fosman hard rubberized for like 3 bucks shipped from ebay. Great case for the money and like previously posted a 40 buck otterbox on a $220 phone is a bit of overkill.
I use the Black (Argyle Interior) TPU Crystal Silicone Case Cover For Motorola Triumph on for about 5 bucks. I have dropped the phone a few times and have no dings or scratches anywhere. It is thin enough to not affect the size of the phone and does it's job. I would recommend it over the silicone cases or even the snap on cases.
Whatever one is the cheapest at any online retailer. I would not buy one for .01, mind you, as those are most likely scams! But anything from a reliable retailer at a low price (I replace my generic ones every couple of months).
Hey fellas,
I used to post my reviews over on the Galaxy S3 forums (and the Galaxy Nexus, S2 and Nexus S forums before that), but since I've recently gotten my Nexus 4, I decided to start my coverage as soon as possible. As most of you know, brand name cases are still hard to find but should be released in the next few weeks. I decided to pick up a temporary case in the TPU S-Case and wanted to share my thoughts. This is a simple TPU case that offers contrasting matte and glossy portions to create a cool design.
The case offers a moderate amount of protection without adding too much bulk and is extremely affordable at only 5$! I'm happy to take a look at any cases you'd like me to, so feel free to recommend anything! I will be posting a ton more content on the channel. Check out the full review of the S-Case below and let me know what you think:
I remember your vids from the Nexus S and Galaxy Nexus forums. Nice to see you covering accessories for the N4 as well
as for the case, I'm tempted to order one because of the cheap price tag to hold me over until the Rearth slim gets here but then again it might arrive the same time as my N4
FLNexus said:
I remember your vids from the Nexus S and Galaxy Nexus forums. Nice to see you covering accessories for the N4 as well
as for the case, I'm tempted to order one because of the cheap price tag to hold me over until the Rearth slim gets here but then again it might arrive the same time as my N4
Click to expand...
Click to collapse
Thanks man! Rearth cases ship on the 30th, so you'd only have this one for a few days. I'm really excited to get the Slim case though, looks terrific and Rearth has yet to disappoint me!
I had one of these for my nexus S and threw it away in the same day.
This is just a piece of rubber bulky trash..
My case came in yesterday from kaycase. I got it for .99 cents!!!
There were several brands selling these on Amazon for various prices. It's hard to pick when there are almost no reviews, because no one has their phone. o.o I ended up buying one from "YESOO" (best name ever) that, for ~$6, came with a stylus too. Sure, why not? I like that they are providing clear options, to keep the N4 sparkle effect, but it's sad that basically no one is making a fully clear case yet. It's all the S design. (Normally that'd be great, but the N4 doesn't need window dressing. ) The Rearth ones look really nice too (very Feather-like) but no clear ones.
kayateia said:
There were several brands selling these on Amazon for various prices. It's hard to pick when there are almost no reviews, because no one has their phone. o.o I ended up buying one from "YESOO" (best name ever) that, for ~$6, came with a stylus too. Sure, why not? I like that they are providing clear options, to keep the N4 sparkle effect, but it's sad that basically no one is making a fully clear case yet. It's all the S design. (Normally that'd be great, but the N4 doesn't need window dressing. ) The Rearth ones look really nice too (very Feather-like) but no clear ones.
Click to expand...
Click to collapse
Yeah, I'm on the lookout for a case that shows off the back too! Rearth is sending me their cases out late this week/early next so I should have videos up on those soon. They always make good quality products in my opinion!
I don't think we will be able to get a clear gel case because it would look like it had water under the case like the clear part ot the clear and frosted S case.
xhausted said:
My case came in yesterday from kaycase. I got it for .99 cents!!!
Click to expand...
Click to collapse
How did you get it for only .99? It's 9.99 listed now? Curious. thanks.
I actually have this case for my HTC Glacier (MyTouch 4G). It's been a very durable case that has protected my phone very well (from 8-10 foot drops from a ladder). I'm a construction worker, and this case has outlasted more expensive models from Trident Case. There is one thing I would like to point out to anyone that is thinking of picking this case up. As a construction worker, I'm not always in the cleanest of environments. This case will allow dirt, dust, and sand to collect between the case and the back of the phone. The metal back of the Glacier is very ugly to look at now because of this. As anyone who has looked into Gorilla Glass 2 knows, sand is it's enemy. This is true of all materials though, dirt and sand will wreck havoc on anything. Just a heads up to anyone that's "hard" on their device. Otherwise, I have no complaints, especially the fall protection this case has proven.
I drop my phone a lot.
I ordered one of these from ebay, the clear and frost one for $5 as well. On amazon a lot of the cases were around $10.
jjnova said:
I actually have this case for my HTC Glacier (MyTouch 4G). It's been a very durable case that has protected my phone very well (from 8-10 foot drops from a ladder). I'm a construction worker, and this case has outlasted more expensive models from Trident Case. There is one thing I would like to point out to anyone that is thinking of picking this case up. As a construction worker, I'm not always in the cleanest of environments. This case will allow dirt, dust, and sand to collect between the case and the back of the phone. The metal back of the Glacier is very ugly to look at now because of this. As anyone who has looked into Gorilla Glass 2 knows, sand is it's enemy. This is true of all materials though, dirt and sand will wreck havoc on anything. Just a heads up to anyone that's "hard" on their device. Otherwise, I have no complaints, especially the fall protection this case has proven.
I drop my phone a lot.
Click to expand...
Click to collapse
I wonder if one of those front-and-back screen protectors would help with that? I've noticed that with other TPU cases I've had too. (For whatever reason, my Feather on my Nexus S hasn't gathered dirt. It's nice.)
Something else that's kind of concerned me with the N4's dual glass, and a TPU case, is accidental side-crushing. Like if you put it in a pocket and then accidentally run into the corner of something. The hard cases are nice for that... aaahh! Choices! :silly: The TPU was cheap so it'll give me some peace of mind until there's more selection, at least.
So many questions!
Ploone said:
The case offers a moderate amount of protection without adding too much bulk [/YOUTUBE]
Click to expand...
Click to collapse
How much bulk? What are the external dimensions of this case?
Do you use a screen protector? If yes, is the case covering it? touching it? pushing against it?
Thank you for your review!
Sinocelt said:
How much bulk? What are the external dimensions of this case?
Do you use a screen protector? If yes, is the case covering it? touching it? pushing against it?
Thank you for your review!
Click to expand...
Click to collapse
Hey, I'm the guy that owns this case on his MyTouch 4G. Since your inquiry doesn't have a response, I'll tell you about the version I have. It's the thinnest, sleekest case I have seen for a phone that isn't a skin layer. It actually wraps around the phone, creating a lip for the front of the phone. This is great if the phone ever winds up face down, as it keeps the screen from coming in contact with the surface the phone is lying on.
I would say the case is about 1/32nd of an inch thick, adding a total of maybe a 16th of an inch to the width of the phone (sorry if this isn't helpful, I live in the US and my job consists of a lot of measurements in inches). The sides of the case have a raised diamond plate pattern to it that helps immensely with keeping your grip on the device.
With the case wrapping around the bevels of the screen, I have found that it will push on any full screen protectors I have installed. You can easily wrap the case around the screen protectors to prevent this, but I store my phone in my pocket, so when I reach in there to pull it out, I tend to grip the case which causes it to bend just enough to slip back and push the screen protector again. This of course causes the protector to bow and collect dust. If you can keep the case's edge on the screen protector, I wouldn't see this being an issue, but it is something I have experienced.
As stated, this is my opinion on the version for the MyTouch 4G, though the design seems nearly identical, with the buttons in different places. I hope it's helpful, and perhaps you'll get some information from someone with the Nexus 4 version. I'm hoping to find a durable case for my Nexus 4. With that full glass body, I don't want to hide it, but as stated previously, I'm a construction worker and need to protect it.
$2.30 on dealextreme
I found the standard S-case for $2.30 on dealextreme. I can't post the links because I'm a new member but you can find it if you look it up on their website. Probably cheaper than anywhere else, if you don't mind the shipping times.
I bought one of the ones from Amazon, mainly cause I had a $20 gift card from buying Halo 4 during Black Friday, and so I could use Prime Shipping. Here's the video overview I put together:
Note: I bought this one http://amzn.to/11PmX90 and the photos show the logo on the bottom of the back - this logo is not there on the actual product.
It's really nice. I'd rather have an Otterbox, but this works in the meantime.
where are these on Amazon under 5 bucks. i refuse to pay $10 for a rubber cut out
Lockeskidney said:
where are these on Amazon under 5 bucks. i refuse to pay $10 for a rubber cut out
Click to expand...
Click to collapse
I believe Ebay is where they're finding them for $5. You also end up with longer shipping times, etc. Pretty sure it's the same case at the end of the day.
Ploone said:
Hey fellas,
I used to post my reviews over on the Galaxy S3 forums (and the Galaxy Nexus, S2 and Nexus S forums before that), but since I've recently gotten my Nexus 4, I decided to start my coverage as soon as possible. As most of you know, brand name cases are still hard to find but should be released in the next few weeks. I decided to pick up a temporary case in the TPU S-Case and wanted to share my thoughts. This is a simple TPU case that offers contrasting matte and glossy portions to create a cool design.
The case offers a moderate amount of protection without adding too much bulk and is extremely affordable at only 5$! I'm happy to take a look at any cases you'd like me to, so feel free to recommend anything! I will be posting a ton more content on the channel. Check out the full review of the S-Case below and let me know what you think:
Click to expand...
Click to collapse
Thanx mate
This is the one I bought. That's my review (Meg), actually.
http://www.amazon.com/Flexible-Google-Exclusive-Aluminum-Silicone/dp/B00AAJ8LZW/
Hmm.. it seems to be up to $8. Still, $8 with free shipping isn't terrible.
I am awaiting my order for the SGP Hybrid-Neo and I'll see how it performs when I receive it.
While waiting for the Spigen case to arrive, I've been looking around for other protective cases with a minimum of material, meaning I'd like the lowest profile protection possible, which Protects the S4. Not a minimalistic case which offers the minimalist of protection, because that defeats the reason I'm getting the case in the first place.
I came across this site which has, in their opinion, the top 15 cases:
http://www.techradar.com/us/news/ph...sung-galaxy-s4-case-15-to-choose-from-1149624
The WorkMate Evolution case peaked my interest, so I took a look at their site over here:
http://www.cygnett.com/smartphone/smartphone-samsung/samsung-galaxy-s4.html?___store=world
I watched their video, and it looked fine, but I'm not impressed by demonstration videos in general, especially ones demonstrated by the designer r/manufacturer of the item I'm purchasing, as there is a possibility of bias
It is 'Real World Usage' that counts, whether the video is accurate or not. I gotta check out the item for myself.
With the above being said, the description of the product and the concept appears that the end result would be a well made case of minimalistic construction with adequate protection.
I did some research and have found complaints about:
- the usb port fitment, the hole not being large enough. I watched the video and in the comment section it has been said that this issue has been resolved by the manufacturer with the updated cases, so I'm not too concerned about this issue as it appears to have been resolved.
- stiffness of power/volume buttons
I have sent an email to Cygnett, and I look forward to receiving their response.
I'll be ordering this case from Newegg, as they have very good shipping times and Return/Refund Policies with No return fees, including 45 days to return the item.
http://www.newegg.com/Product/Product.aspx?Item=N82E16875983832
The case is available from Amazon, but they only Fulfill the orders, and one of the Sellers is in China/Hong Kong with delivery times up to 26 days or so. The other Seller has a 15% fee for Returns.
The case is also available form Cygnett, but the standard shipping times are up to 10 days.
Amazon Update:
The Cygnett WorkMate Evolution case now Ships from and is Sold by Amazon::good:
http://www.amazon.com/Cygnett-CY1194CXWOR-WorkMate-Case-Galaxy/dp/B00BXL7VKM
I'l let you know what I think of the Cygnett when I receive and use the case, including the response from Cygnett.
I just picked up my Cygnett WorkMate in Bright Blue color.
These are my first impressions, as I've only been using it for 2 hours:
1) nicely packaged in a clamshell as other cases are coming in these days.
2) after removing the WorkMate from its packaging, I was impressed with the build quality, and I really liked the color scheme.
3) the 2 part case came assembled, and the S4 'snapped in' quickly and snugly.
4) once the S4 was wearing it's new protection, I was like, 'this is some nice protection' and that I was confident, if dropped, my S4 had a good chance of surviving unscathed.
5) I felt that the WorkMate offers some real nice protection in a very minimalist format.
6) the protective lip surrounding the screen rises nicely above it and appears that it will offer nice protection with lip height to spare for a glass protector.
6) the power and volume buttons do have a stiff feeling to them, but once you get used to it in a short bit, it's not a problem at all. I would say that with use, the buttons will most likely give a little.
7) the usb port was a hair too small lengthwise for the head of the stock usb cable to fit into. After 40s of the minimalist of quick scraping of the 2 sides, the usb head fit perfectly. Can't tell any mod was even done.
I'll see how it goes using this case, as I just received it. I must say that I am impressed with its style, construction and perceived protection and durability in a minimalist form factor.
I say perceived because I just received the case
I have the same case in black. I like it a lot apart from the problem you mentioned with the usb cutout ... just got around to scraping the sides with a blade for a minute or so and now it's a perfect fit.
In terms of protection, I think the YouTube video pretty much speaks volumes about the effectiveness of these cases ... the phone survives a ten foot drop. I've dropped mine once from about four foot and there was no issue whatsoever.
Sent from my GT-I9505
This case is definitely a keeper. I've never used a case prior to this and the SPG Neo Hybrid. The reason being I didn't like weighing down and bulking up what is an otherwise light, thin, flat phone such as the S4, the S3, the S2 or whichever other device that slides into my pocket.
But when I dropped my S3 from about a foot onto concrete a couple of months ago, and the screen fractured, I was like, this is bs. But then the time wasted on trying to get a replacement from Asurion, who sent me a defective outta the box refurbished S3, I started looking for cases for the S4. The SGP is going back due to sagging of the neoprene after 3 days, in addition to it offering very little protection, but my S4 will be sporting the WorkMate.
I haven't applied my SGP Glas.tR Slim as of yet, and I'm thinking about whether I'm going to or not. It would add additional weight, and unless I drop my S4 and it hits the corner of something, I feel the WorkMate will protect the screen from most drops without having to add the glass screen protector. Plus I do have insurance. I gotta give it a little more thought.
Biker1 said:
This case is definitely a keeper. I've never used a case prior to this and the SPG Neo Hybrid. The reason being I didn't like weighing down and bulking up what is an otherwise light, thin, flat phone such as the S4, the S3, the S2 or whichever other device that slides into my pocket.
But when I dropped my S3 from about a foot onto concrete a couple of months ago, and the screen fractured, I was like, this is bs. But then the time wasted on trying to get a replacement from Asurion, who sent me a defective outta the box refurbished S3, I started looking for cases for the S4. The SGP is going back due to sagging of the neoprene after 3 days, in addition to it offering very little protection, but my S4 will be sporting the WorkMate.
I haven't applied my SGP Glas.tR Slim as of yet, and I'm thinking about whether I'm going to or not. It would add additional weight, and unless I drop my S4 and it hits the corner of something, I feel the WorkMate will protect the screen from most drops without having to add the glass screen protector. Plus I do have insurance. I gotta give it a little more thought.
Click to expand...
Click to collapse
I'm wearing a screen protector to guard against scratches. The workmate will protect against most face down drops onto a flat surface. It's rocks and stones which are the only thing you need to fear with this case and I doubt any screen protector and few if any cases can protect you if you drop your phone onto a sharp, pointy rock.
Sent from my GT-I9505
dr.m0x said:
I'm wearing a screen protector to guard against scratches. The workmate will protect against most face down drops onto a flat surface. It's rocks and stones which are the only thing you need to fear with this case and I doubt any screen protector and few if any cases can protect you if you drop your phone onto a sharp, pointy rock.
Sent from my GT-I9505
Click to expand...
Click to collapse
Hopefully I won't drop my S4 into a rock or edge of something that will bypass the protection of the WorkMate and damage the screen, if I choose not to install the glass protector. But Murphys Law will probably apply
I figure the WorkMate will protect the S4 under most circumstances, and in those instances where it may not, I have the insurance.
Sorry to keep posting repeatedly but I'm so stoked about this case. Overjoyed in fact. Most cases add to much bulk or provide too little protection. This bad boy provides excellent protection without adding significant bulk and as a bonus the textured back makes the phone much easier to hold on to.
I'm usually a bit of a case whore and change often but this time I'm staying put. The only other case that's really caught my eye is the Griffon Survivor. I'll probably end up getting that once is available just for those occasions where I really need the maximum protection. The rest of the time I'll be rocking my Cygnet Workmate. :thumbup:
Sent from my GT-I9505
Post away, like I seem to be doing
It seems that the Cygnett doesn't get a lot of publicity, at least in the USA.
I'm sure that is not the case in New Zealand, as the company a in Australia.
In addition to the possible lacking of advertisement, getting the case can be an issue for some.
Amazon has a couple of sellers, but it is not Sold and/or Shipped directly from Amazon. One seller appear to be overseas and can take over 20 days to receive, and the other Seller has a 15% penalty for Returns. Amazon only shows a few reviews for the case which means sales are low. The aforementioned may be some of the reasons for the lack of sales via Amazon. I purchased the WorkMate from Newegg, which is where I suggest others, at least in the USA to purchase from. Even Newegg has no reviews.
As mentioned, I wasn't a case guy, but this case changed my mind about cases.
It just screams out Protection in a very minimalist format. Hey, they have it in Blue which I couldn't resist
Update:
Is this the other case you mentioned?
http://store.griffintechnology.com/survivor-skin-for-samsung-galaxy-s4
The case has a nice look to it, and although it seems to offer more coverage to the top and bottom of the S4 screen, I don't know if it offers better protection than the WorkMate overall. The price of $18 is cheap enough, but I don't know the quality of the case. Once in hand, a better determination can be made.
Biker1 said:
Post away, like I seem to be doing
It seems that the Cygnett doesn't get a lot of publicity, at least in the USA.
I'm sure that is not the case in New Zealand, as the company a in Australia.
In addition to the possible lacking of advertisement, getting the case can be an issue for some.
Amazon has a couple of sellers, but it is not Sold and/or Shipped directly from Amazon. One seller appear to be overseas and can take over 20 days to receive, and the other Seller has a 15% penalty for Returns. Amazon only shows a few reviews for the case which means sales are low. The aforementioned may be some of the reasons for the lack of sales via Amazon. I purchased the WorkMate from Newegg, which is where I suggest others, at least in the USA to purchase from. Even Newegg has no reviews.
As mentioned, I wasn't a case guy, but this case changed my mind about cases.
It just screams out Protection in a very minimalist format. Hey, they have it in Blue which I couldn't resist
Update:
Is this the other case you mentioned?
http://store.griffintechnology.com/survivor-skin-for-samsung-galaxy-s4
The case has a nice look to it, and although it seems to offer more coverage to the top and bottom of the S4 screen, I don't know if it offers better protection than the WorkMate overall. The price of $18 is cheap enough, but I don't know the quality of the case. Once in hand, a better determination can be made.
Click to expand...
Click to collapse
You can just walk into your local chain store and pick up the cygnet cases here. Surprised me ... they don't normally have the best cases. The salesman preached the virtues of the case, I believed him and luckily he was calling it straight.
You've linked the survivor skin, I'm waiting for the survivor.
http://store.griffintechnology.com/survivor-with-belt-clip-for-samsung-galaxy-s4
The skin is to the survivor what the Otterbox commuter is to the Defender. Basically the survivor is the Defender done right. I've heard that the Defender has clips on the phone case which mate to the belt holster and that these clips can smash off in a fall. No such design flaw on the survivor and it has padded flaps to cover all the ports and the camera. Had one on my s3, it added a lot of size to the phone but man that thing felt indestructible.
I don't need that kind of protection every day but there are still occasions where I really want that assurance that my phone has the utmost protection.
Sent from my GT-I9505
Thanks. I'll take a good look at it later, as I gotta get some shut eye
I read the description and it definitely looks like an anti-destrutive case with those listed specs.
Much easier for sure to get the Cygnett where you are. They definitely have a larger customer base there.
LOL, I was stupid to purchase a case at tmobile store cost me 30 buck. Question, I have a white S4 they don't have survivor in white?
Sent from my SGH-M919 using Tapatalk 2
epsix said:
LOL, I was stupid to purchase a case at tmobile store cost me 30 buck. Question, I have a white S4 they don't have survivor in white?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
I just found this for you:
http://www.youtube.com/watch?v=Zcv9mCVIB-c&feature=youtube_gdata_player
Btw, I'm extremely satisfied with my WorkMate, even though I haven't dropped my S4 as of yet
But as I mentioned previously, this case is very well built, and I feel confident it'll protect my S4 in case of any unfortunate drops
Btw, you mentioned the Survivor.
If you're referring to the Cygnett, it's the Evolution.
If your referencing the T-Mobile case, I'm not familiar with it.
4 week follow up
Well, it's been about 4 weeks since I took possession of the Cygnett WorkMate Evolution case in Bright Blue and:
- the case looks as good as it did the first day I received it* (see below)
- the case fits as well as the first day. There is nothing that will stretchout, etc.
- *the light Grey back, when you hold it at an angle to the light, you can see certain areas where there is a slight lightness to the Grey, but only at certain angles. The cause is most likely from natural oils in the skin, as the slight blemish ocurrs where you hold the phone the most.
- I have not dropped the phone as of today, and don't expect to, but if I do, I'm confident that the phone will be very much protected
- although the case adds slight bulk to the S4, as the S4 is so very slim and light without the case, it fits comfortably in my front pocket, and my pants are not of the baggy variety
And there you have it.
My overall rating of this case is 9.8/10 (due to the very hard to notice blemish)
I highly recommend it to those who are looking for excellent protection for their S4, in a minimalist form factor.
This is a case that when you see it, hold it and put your S4 in it, you will be confident that your S4 will be very well protected.
I've updated the op to reflect the fact that the Cygnett case is now Sold by and Ships from Amazon:
http://www.amazon.com/Cygnett-CY1194CXWOR-WorkMate-Case-Galaxy/dp/B00BXL7VKM
Here is an update regarding the discoloration of the Grey back of the case:
I've just taken a couple of pics tonight of the discoloration that the medium grey material has sustained. While it doesn't affect the protectiveness of the case, it does affect the aesthetics.
The discoloration of the case has occurred where my hand/fingers grip the back of the case the most.
When the Cygnett was my edc, the discoloration gradually occurred over the course of approx. 6 weeks. It looked great when it was new, but not that great after only a month and a half.
I just sent an email to Cygnett 's US office regarding this issue. I'm hoping this issue is just an exception, but if it's a material flaw, hopefully it has been resolved.
http://us.cygnett.com/contacts
Update:
I didn't receive a response to my email so I called the phone number for Cygnett's US office.
Spoke with a very nice rep, and explained my issue.
She is sending out a replacement shell, and gave me her personal email address.
I sent her my shipping info, and she responded that she just shipped out the replacement.
Excellent customer service:good:
Biker1 said:
I've updated the op to reflect the fact that the Cygnett case is now Sold by and Ships from Amazon:
http://www.amazon.com/Cygnett-CY1194CXWOR-WorkMate-Case-Galaxy/dp/B00BXL7VKM
Here is an update regarding the discoloration of the Grey back of the case:
I've just taken a couple of pics tonight of the discoloration that the medium grey material has sustained. While it doesn't affect the protectiveness of the case, it does affect the aesthetics.
The discoloration of the case has occurred where my hand/fingers grip the back of the case the most.
When the Cygnett was my edc, the discoloration gradually occurred over the course of approx. 6 weeks. It looked great when it was new, but not that great after only a month and a half.
I just sent an email to Cygnett 's US office regarding this issue. I'm hoping this issue is just an exception, but if it's a material flaw, hopefully it has been resolved.
http://us.cygnett.com/contacts
Click to expand...
Click to collapse
I've had mine for about 2 month and the colors are still fine.
keltsi95 said:
I've had mine for about 2 month and the colors are still fine.
Click to expand...
Click to collapse
The gray backing has a wear patten on mine.
I took a closer look and in between the tiny raised bumps, the material is worn, which creates the 'discolored' look pattern which is more perceptible at certain angles.
Still a case which appears to offer excellent protection, although I haven't dropped mine yet .