So i recently installed Navicomputer, im going overseas and dont want to pay for knowing my way around and GPS was taking a while to connect. And then it didnt connect, just kept searching.
So i installed BeelineGPS to check and it detects my GPS.
But then gives me no lattitude or longitude or anything for that matter.
WTF?!
Walkthrough please on how to set up my GPS??
Port 7 software, Hardware port 9 with Baud 4800 (tried 9600).
Samsung I8000 running WM6.1
Easiest way is to run GPStest to determine gps ports etc and then you should be able to add these details to the program
Related
I have seen a few threads on here about it, but they usually have to do with people having problems. I would really like some sort of bluetooth gps solution for my VOX. I really don't want to spend $500 or more on a tomtom or garmin or something like that because I will only be using it very rarely. So to make it easy for me, and everyone else.
Whats the best combination of hardware and software to turn my vox into a GPS navigation device? Thanks.
I'm currently looking at a holux M-1000 receiver and I already have google maps installed, any help is appreciated.
ok i had this problem with my vox looking around for a good sat nav program and i found out that route 66 was the best it works fine with no problem with out messing around with settings all i did was install it and then run it just make sure your bluetooth gps is on and paired with the phone and also make sure you have ticked the com port settings if you pm me i can help you out with a link to get the programe hope this helps
I would say smart2go is your solution.
You pay for the time you intend to use it.
7 Euros (roughly) give you access to 1 week of navigation, 50Euros to 1 year... If I remember well.
Maps get updated, you either download the portion your crossing via GPRS or you store them completely via your PC on the memory card.
You go on Holiday 1 month and you need Nav? Pay just for 1 month.
TomTom is surely very good... But cheaper can also be nice.
Ka.
TOMTOM
I use Tomtom mobile 5 and this proves to work very well, Cost me very little(less than you might think) from tomtom direct so its very cheap and currently the best navigation solution available for windows mobile, Version 6 will work but it needs some tweaking. One issue with tomtom mobile 5 is that you MUST remember to name your bluetooth gps "BT GPS" during pairing otherwise you could have some issues with tomtom recognizing your gps module.
@kast,
what version of smart2go do I have to install on the vox ?
The windows mobile 5 phone edition ?
Marcus
Hi there,
Have been trying to setup the gps signal on my dads touch pro (raphael), however it seems incapable of getting any kind of GPS receipt.
I've installed HTC GPS tool to test this and have tested 57600 (default) and now 4800 baud rate. It does not seem to get ANY response, does not find a satellite whatsoever. I've also set it to cold start, and have run quickgps beforehand.
What settings do you guys use to get a GPS fix and do you have any suggestions for me?
Rom version is latest official, so is radio. No hardspl or any of that stuff installed, stock touch pro.
boud will make no difference at all
it's an old leftover from when gps was serial rs232 connected
and even back then it would make no difference as long
as the wired gps supported the chosen boudrate
preciously few data is being transmitted from a gps
but mind you it's rare to get a gps to work inside try outside or in a car
there they work
use ChartCross GPS app
it auto detects GPS and gives you indication on the progress of getting the GPS fix
usually it's COM4, baud could be 4800, 9600 (i've used these two) or anythinf
cold fix indoors (with QuickGPS almanac downloaded), i could get one indoors in 5 minutes... less than a minute outside of course
Hi @ all,
first of all a happy new year
I wonder if anyone has the Omnia B7330 running with TomTom 7 on it. I have the problem that TomTom doesn't find the internal GPS. I tried all possible settings with
"internal GPS"
" other NMEA GPS"
and all possible Baud rates and com Ports
but TomTom does not find the internal GPS.
In the meantime I wonder if perhaps the internal GPS might be damaged and I should send the device back??
On my HTC Snap (Maple) TomTom recognizes the internal GPS immediately.
I als tried to manage something concerning "Port Splitter", but most of these programs are not for WM without touchscreen....
Any ideas how to get this working?
Best Regards
Jolig
Hi, if you want to know if your device is working or not, try GPS Test 1.04. There is a cab file for it, "google is your friend" as they say. 8) If you run the program (it is good for non-touchscreens as well) and it can find a signal, then you have to fine tune your navigation software, if no signal, then you have a faulty device.
Happy New Year!
Welcome to forums
Hope this helps:
http://cellphoneforums.net/samsung/
Good luck,
Same Thing here...
...the Testapp recognizes the GPS on COM3 with 9600Baud and can work with it. The GPS Module seems to be working well, found my position after 10secs. TomTom however can't work with the GPS-Module... I'm on TomTom 7.910.
Any idea?
JC
Try this
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
------Tomtom Configuration-----
*GPS NMEA
*Baud rate 4800
*COM2
IMPORTANT
When you make all the steps you have to see in the Satellites top/right windows of the tomtom a little Yellow/Black ball rolling, that means the GPS is working. You only have to wait to your Omnia GPS find the signal.
-> You can download an XTRA GPS DATA to improve the finding speed of the GPS, personally I can not see the diference between NO XTRA DATA and XTRA DATA.
Settings\Hardware\Enchanced GPS
*Enable XTRA DATA CONNECTION
*Disable automatically download.
*Press download button
With that configuration in my omnia I don't have any problem with Tomtom.
The Testapp also recognizes the GPS on COM3 on my B7330.
But it dosen't work on TomTom 7.910.
Is there a way to change the GPS to use COM2 ?
tom tom
Hello!
Do this:
use another phone with touch screen, set the tom tom gps as an external port and the appropriate speed,
save your settings. fire up tomtom on omni pro b-7330.
Can you type the addresses correctly? I had a problem with another phone with qwerty by tomtom7.
Erroneous indication of gps in omni pro B-7330 / no fix
Erroneous indication of gps in omni pro B-7330 / no fix
I need help, my gps in the B-7330 incorrectly indicates the distance of some 400km,
Is it a bug?
after uploading the google maps, fix grabs for a few seconds, and incorrectly states the place automapa (another program to navigation) also indicates the wrong place but other than google maps, the difference of some 1000km.,
I used GPSTEST 1.04:
COM3: 9600kb.
Is it firmware bug, or damage is hard?
using the settings from the post in advance Com9: omnia has gps pro, but did not catch the fix - no signal satleitów.
So, are you sure the port Com9?
So I need help
You should try posting on the proper section for this non HTC device:
http://forum.xda-developers.com/filter.php?cat=Samsung
TomTom GPS Problem
chindley said:
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
Click to expand...
Click to collapse
Hi,
where did you find the external gps setting at the omnia. Cannot find them. thanks for your help.
Samsung Omnia B7330 and Tomtom Navigator 7
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
thebiff said:
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
Click to expand...
Click to collapse
TomTom is pants on the 7330.
I'm using Route 66 (v7) with UK and Europe maps. GPS can be interigated through the menu and cold fix is quicker than most I've used.
No GPS lag, and other than the soft button icons sitting above the call and call end buttons (can cause confusion), I would recommend going down this route instread (no pun intended)
Also strangely, the 'browse map' facility is managed through the 'zoom to' function.
Alan.
hello and happy new year to all!!!!
i have tried all wwe roms from wwe 03 up till present wwe 05 rom which im currently using on my htc magician device.i keep trying everyone of these roms in hope to get tomtom 7 up and running.i cant get my external gps devise to be seen by tomtom i get as far as pairing via bluetooth i have gpsgate and also gps proxy gps2blue also tried gps test version 1.04 which scanns ports but still does not find my gps! my gps devise is bt 541 holox which working fine with nokia n95 but due to tomtom mobile maps being up to date. i would be gratefull if some one might help me step by step manythanks
Hi Mr Joe,
I've tried to use Tomtom 7 with wwe 03 and same problem.
The only way to use it that i've found is to download GPS proxy on this site :
http://sourceforge.net/projects/gpsproxy/
You had to add a outgoing port in your GPS BTH (port 6 by exemple)
With gps proxi , you've to create a virtual port 4 (automatically) and via the option, configure entry port 6 and outgoing port n° 4.
with tomtom, u choose port 4 for you GPS and it's works.
hi thank you for your swift reply
i tried as mentioned above and gps proxy says
the nmea input provider failed to start creatfile failed 55
lol still pulling hair out i must have spent about 60 hours searching forums and diffrent apps
after uninstalling gps proxy i reinstalled gps proxy to find error on screen saying i needed opennetcf.sdf.ppc.arm.cab im still searching for this file lol
every time i try install gps proxy it say you need blah blah file befor it will work i keep downloading these diffrent files and installing them then keep uninstalling gpsproxy 2.2. then again and again .......... im so frustrated all i want is tomtom 7 up and running with my gps device. is there anybody who has wwE 05 FOR 64MB DEVICE who has not had to spend approx 65 hours trying diffrent roms diffrent apps to get tomtom 7 working?????????????????anyone know what other files are needed in wwe 05 64 mb device to run gpsproxy????????????? anyone have a list or even a simply way?
OK I FOUND FILES HERE http://sourceforge.net/projects/gps...6/GPSProxy-1.6-ARMV4-NoInstaller.zip/download
I INSTALLED BUT I KEEP GETTING
THE NMEA IMPUT PROVIDER FAILED TO START: CREATFILE FAILED :55
ANYBODY ANY IDEAS?
STARTING TO THINK AM I JUST BEST TO INSTALL WM 2003
How can i close posts?
i tried this with gps proxy....
i have a bluetooth gps mouse from nokia...
model: ld 1w
I pair my magician with the mouse.....after that i set the gps mouse to comport 6.
Now i run gpsproxy and setup my device:
i add Virtual port com4
in nmea i use for incoming port 6
then i set outgoing port to port 4...
the i push start...
then come "fix typ: invalid"
any idea??
i found 'igo8' to work best on magician.
i use a blue-tooth gps, use standard gps port with the rom, done. no issues and quick.
i can still use my bluetooth car hands free at same time too.
(wwe rom 3.06)
I too have problems with my external GPS (sold under T-Mobile NaviGate Bluekit III mouse, but it's Leadtek under the hood) under WWE_O5 , but I think it's more related to the Bluetooth stack
here's what I did
-> add new device
-> Leadtek Bluetooth GPS shows up, next
-> Passcode is prompted, 0000, next
-> Device added, your pocket PC has connected with Bluetooth GPS
everything is fine up till this point, now the GPS shows up under "disconnected"
Now when I single tap it to turn on Serial Port, save and connect it say
CAnnot connect, your device did not connect With Leadtek Bluetooth GPS. The connection failed or the passcode is incorrect
I'm pretty sure it's not the GPS itself since it ran fine with the vanilla firmware
This is pretty much the only thing that keeps me from fully enjoying the rom, though
Hello
I'm in the same situation as you. I have tried a large number of settings to get TonTom/ to connect to my BT GPS ( I've tried Holux 236slim firmware 3.1.0, Holux236slim Firmware 3.1.1, Holux1000B). None of them are identified by TomTom. I have also tested a handfull of other GPS applications without any problems, they are running perfect. I,ve resetted all GPS's to factory basis, I've modified baudrates, S/N and so on without sucess. tested with and w/O WM "external GPS"-program. The "external GPS" does anyhow transfer the correct comport to Tomtom.
No sucess. No sucess.
By trying the other GPS alternativs inside Tomtom gps-configuration, I've ben able to for a second been capable to get the GPS signal.
-Something is wrong inside WM6.5 , S100 or Tomtom.
P-O
Edit
After first removing all setting for BT then removing the main battey, getting low capacity in back up battery, reinstalling BT-GPS ( Holux m1000b) i've got the Tontom to connect to the GPS. I've used the port (in Tomtom GPS konfiguration) given by the BT-setting, com 7 in my case. It failed when chozing the port given by the "external GPS#
The installation is not stable. after shutting down the S100 and restarted. It failed and I had to remove main battery again. Now its working.
I do not dare to test with another GPS yet.
P-O
Second edit
I have sucessfully connected all my GPS decvices. Anyhow the connection to Tomtom is more unstable on the magician then on my other phones (Wizard and Herald with WM6.1). Unstable in my case means: loss of connection, have to reinstall GP-device and reboot. Anyhow. I have beiing driving 400 km today without any problems.
P-O
hi,
im using mda compact(htc magician and 05 64mb rom cotulla ) i have tomtom 7 with new maps demo works great ,only problem is can not get tomtom to see my bluetooth gps!
(gps works with a program called sky traq only settings i needed to set up is find bluetooth device and then connects, picks satellites up in a split second )
my question is there a program that will tell me what port my gps device using? is there away maybe with a registry editor to find out what port tomtom 7 is using?and possibly if needed a program to see what com port my bt 541 gps device uses or needs??
bluetooth setting
do i pair(i imagine i need to so i have
secure connection tick or untick?
bt com port?
only have choice com 6 com 7!
what are the recommended settings in external gps ?
program port?
hardware port?
manage gps automatically do i tick or untick? i have tried lots of settings i got as far as seeing no gps device in tomtom but with satellites greyed out like its stuck but i cant remember settings i used
hope some one can help me out ?????thanks for taking the time to read my post