Morning / Afternoon / Evening to All,
Not to be critical of this wonderful website which is full of great resources but, I have noticed that the useful info is hard to find.
So I thought it might be a good idea to post all of my items in the one place so here goes.
I will update these as i go.
TIP
If you want the CAB Files in remain in your PPC after install simply change the files preferences to "Read Only"
since i was just upgrade from wallaby to magician, i found all your posting, instructions and cab files very very helpful thanks a lot ampda, you rules :!:
Hello ampda , Great Work Friend . . . many thanx for these cabs and instruction files.
Cheers for taking the time to make them for the rest of us noobs
Glad to Help
verry nice indeed but there are simpler ways of doing the discribed below
(copied this out of pdf file )
3. Copying your “Extended ROM” Files before Big Storage
You need to copy the files from your “Extended ROM” before you go the Big Storage as you will need to install some of them after you’re finished, i.e. MMS etc. They will be deleted after the upgrade (and that’s the whole point).
a. To copy them from your Magician do a hard reset (push the power button and reset button at the same time).
b. Go through the screen alignment, time zone etc and get ready…….. when you reach the “Completed” screen it will ask you to “Tap your screen…. As soon as you tap the screen you get 3 sec to soft reset (push the reset button). If you miss it as I did just do a hard reset and try again.
c. After you do b. above go to the built in file explorer and under “My Device” you will now see the treasured “Extended_ROM” with all its files. Copy the directory straight to your SD Card then to your PC, keep them safe.
its just a bit easyer when you just fill in
go to windows folder on PPC and search loadvdisk.exe
run it and you will see your ext_rom (until you reset )
not to sure the usual file explorer can do this but Resco file explorer will find it
another progie that can find it is total commander :
find it here
http://www.ghisler.com/pocketpc.htm
no offence ment by this
Logos for Qtec, i-mate...
http://www.npo-hors.ru/logoqtek/logoqteks100.rar
Hi!!
Thanks for all your help!
Does anyone konw, or is there a way to save to the pc the SMS messages both received and sent??
Cheers!
use jeyo mobile companion. u can backup all of your messages, contacts (phone and sim), etc.
Hi!
Thanks for the tip!
By the way, and i think these questions are more tricky, is there any way NOT to charge the battery while the phone is connected to the USB?
And while using the calling software, when inputing the nunbers, to make the sim card entries dissapear and only have the ones that are in the contacts? Because most of the times i have a double entry and it really makes me mad!
Thanks!
The way to NOT to charge the battarie is to make some changes to your cable - cut +5v from USB (or make a switch).
the tray launch only app.... theres now way to BROWSE for the program you want on the tray?
sucks that you have to type out the entire path just to get it
Any idea whether these (or more specifically the camera speckles change) will work on a Wizard?
Remove Camera
Noob question here.
Once i install the camera & album to Storage how do i delete it from the \windows . Maybe not possible due to it being in ROM. In this case I end up with 2 camera software? So i'm curious what is the idea of installing in storage.
Halo ampda, i tryin to follow your how_to_ppc_upgrade.pdf buat I stuck in the step 4 backing up your existing rom to PC, in romupdate.exe I still confuse about the PORT things. can you help me to, which one to use?
please help...
thanks
Thanks for nice posting AMPDA..
I have a question,
I installed ampda_CameraV2.7b21026_RAM.CAB
but my camera version was 2.70 (build 18727) and it is still the same. I reset the device but still didnt become build 2026.
Do you have an idea?
regards
Guys,
This sharing is really useful. I just bought mine few days ago from ebay. Mine doesn't come with ANY EXT ROM at all! No software such MMS, smart dial etc.
Can anyone provide a link to get back those basic EXT ROM software so that I can upload it back? ftp://ftp.xda-developers.com/ is not working for me. Any help pls?
Pillow...
Pillow write your email address. I'll send you them via email. (Those which are not device spesific).
What is the type of your device and rom versions?
smellypillow said:
Guys,
This sharing is really useful. I just bought mine few days ago from ebay. Mine doesn't come with ANY EXT ROM at all! No software such MMS, smart dial etc.
Can anyone provide a link to get back those basic EXT ROM software so that I can upload it back? ftp://ftp.xda-developers.com/ is not working for me. Any help pls?
Pillow...
Click to expand...
Click to collapse
Hi Lupusic,
Thanks a lot for your kind offer. I manage to pull up the files from the FTP using cuteFTP software. Some how my company laptop doesn't allow default browser connection....
My phone is O2 mini and has v.1.13 for both rom & radio. I think it's BigStorage (not sure though).
Any good advice for me? I mean anything at all....
Thx again
Pillow....
Guys, I'm not able to run Boot Image Tool. It gives me this error
Component 'mscomctl.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
Any idea?
Thx....
Hi AMPDA,
Thanks for all your postings on big storage which gives detailed instructions step-by-step. Very brief and consise. Also now I notice you have put everything into 1 place like a table for pick and choose. Can it get any better ? Can't ask for anything more. You have so many useful cabs and instructions. I have benefitte a great deal. ONCE AGAIN Thank You.
THESE APPS ARE NOT MINE ! I just share them with u ! even when u install them , in the Remove programs menu , u can see the creator's name !!!!!!!!!!!!!
Let me intoduce u to my archive of usefull apps for MEGA users
1st cab - Make ur MEGA sound 20% louder than before
2nd cab - Return your MEGA to it's normal sound setting
3rd cab - Make ur Mega not lock itself when u press the OFF button ! Very usefull but after getting worried calls from granma " Why u called me and u didn't talk !? i got so so woried " i removed it It turns ur device in standby like default but it does not require to slide that cube to unlock keys are active !
4th cab - Make ur Mega lock itself like it was before
5th cab - Removes that teasing question when u install a new program/application and it asks if u trust the polices or some sort of that Very usefull !
6th cab - Activating the support of WiFi 802.11G
7th cab - Makes ur WiFi stay awake when the phone get's locked , usefull when using Skype(or similar) or dont want to connect/disconnect/reconnect every time u leave it for a minute and it goes in standby
8th cab - U know when u open something and there's a field where u can type something and ur keyboard goes on !? isn't that annoying !? Here's the solution ! It'll show on only when u want it !
I continue in the next post i cant upload more files in this one
THESE APPS ARE NOT MINE ! I just share them with u ! even when u install them , in the Remove programs menu , u can see the creator's name !!!!!!!!
Here i go on
1st cab - Increase your touch screen sensitivity ... i cant really say it works but it is worth trying at least it wont bite !
2nd cab - Change ur softkeys at ur Home screen ! could be very usefull if u got to talk a lot and got to have quick access to contacts and call history !
They'll become-- Left - Contacts Right - Call History
3rd cab - Rotate Screen ... i know there's alredy "How To" but i think this would be much faster and easier Install the cab , make a Soft Reset , go to "Start/Settings/Personal Folder" and start "Buttons" , mark "Send key (Hold)" if it isnt and from the bellow menu "2.Assign a program" choose "<Rotate Screen>" ! After that press OK and enjoy i really cant find it that usefull but u know the best
4th cab - Reset button Install it and u will open ur back panel 50% less than before ! it's just a shortcut , tap on it and ur device Soft Resets just like if u punched the back key , but now u dont have to open ur back panel and use ur stylus I really preffer it couse at sometime this backpanel could break some of the pins and it'll come unstable
I'm too booooored now to connect the MEGA to the PC and upload 1-2-3 more usefull apps , which maybe u alredy know but i'll do that tomorrow ... new owners would find this thread usefull
Nice collection. I can confirm that the sensitivity increase does work, its too twitchy though. I've performed most of these tweaks manually but its good for people who arent sure about it.
Now we just need a damn app that improve the camera and easily allows you to map the "take photo" button to a real button.
Thanks a lot
Really a good collections
Will give a try and will let u know the results.
Quality post mate, cheers - some of them are must have
Theft is a bad method of work makes. It was okay to tell me when you decided to publish it, provided that I personally make those CAB files and have them put it in another forum. To thy is quite offensive to me, and very bad talking to you.
Thanks mate ... love your collection with my Touch2
villain72 said:
Theft is a bad method of work makes. It was okay to tell me when you decided to publish it, provided that I personally make those CAB files and have them put it in another forum. To thy is quite offensive to me, and very bad talking to you.
Click to expand...
Click to collapse
Okay, from what I understand you're calling him a thief for posting these files?
He never claimed he created or owned the files, he was simply re-posting a collection of useful files found here on XDA for mega users to find and access them quickly.
That's not theft.
The reason for not post them here these CAB files is that some of them with no problem. But the man who posted them might be explained in more detail where the problem is and how to remove it. Since the I'm doing them, but he is not declared anywhere where they took (the name of the forum) I have another name for it. Anyway - is alive and well! Please no longer discuss this issue.
villain72 said:
The reason for not post them here these CAB files is that some of them with no problem. But the man who posted them might be explained in more detail where the problem is and how to remove it. Since the I'm doing them, but he is not declared anywhere where they took (the name of the forum) I have another name for it. Anyway - is alive and well! Please no longer discuss this issue.
Click to expand...
Click to collapse
We can only say thank you for what you have done
Select mutiple files
love u bro for ur efforts ... is it possible to tweak something for selecting multiple files in the explorer or say copying text in a word document .. when i try doing that it moves the screen...
Thanks
udanii said:
love u bro for ur efforts ... is it possible to tweak something for selecting multiple files in the explorer or say copying text in a word document .. when i try doing that it moves the screen...
Thanks
Click to expand...
Click to collapse
i'm no programmer , so i cant really tell u what to do i just translated and uploaded the progs from another forum for 2 months i havent found a way of doing your desire but u can use Resco File explorer or Total Comander which have ur wanted option of selecting only those files u want to
Softkey changе (Right-Contacts)(Left-CallHistory).cab
contacts don"t work for me but call history works,is it possible to fix that?
stsoulos said:
Softkey changе (Right-Contacts)(Left-CallHistory).cab
contacts don"t work for me but call history works,is it possible to fix that?
Click to expand...
Click to collapse
got no idea ?! let's wait for some programer to show around and light our way out
LtBlue said:
4th cab - Reset button Install it and u will open ur back panel 50% less than before ! it's just a shortcut , tap on it and ur device Soft Resets just like if u punched the back key , but now u dont have to open ur back panel and use ur stylus I really preffer it couse at sometime this backpanel could break some of the pins and it'll come unstable
Click to expand...
Click to collapse
Why can't I put this in my shortcuts on my Touch2? I've installed this one, but it isn't available in my list of programs that I can choose....
Is there a way to put a random file (or in this case an .exe file) that I want in my shortcuts??
10x i like this tread
Hi,
I installed
Disable_Auto_Device_Lock.cab
Sensitivity Touch.cab
Rotate Screen.cab
Softkey changе (Right-Contacts)(Left-CallHistory).cab
Every installation was successful and gives a message as
"The program you have installed may not display properly because it was designed for a previous version of Windows software."
And none of the program works.
I am using HTC T3320 which has Windows 6.5 V.
Pls let me know what i should do so that it works with Windows 6.5 V.
@ganesh.htc: did you try to soft reset your mobile? Try and try ...
Good luck!
Hi misatbt
After soft reset
Disable_Auto_Device_Lock.cab - Works
Sensitivity Touch.cab- i am not sure how to test it
Rotate Screen.cab - Works but has many defects so i removed it.
Softkey changе (Right-Contacts)(Left-CallHistory).cab - Works fine
Thanks a lot
i'm glad i helped with having posted these progs here ;]] after 30 mins will be home and explain "How To" put a shortcut in your Start menu ;]]
Ok, for anyone who finds this. I'm writing out a quick guide for what I was led through. I've borrowed a few lines from some other threads as well
This guide will take an original stock SideKick 4g that has not otherwise been modified, flashed, etc and lead you through the steps to running a custom ROM. This should lead to a smoother running system with less lag, longer battery life, etc.
[Edit] I was pointed later to a nice FAQ by xmeatizmurderx, which, while not a guide, does have some questions answered you might have, along with some definitions and whatnot that might help make things clearer for you or if you just like know what it is something actually does or is. ^..^
I personally updated to Gingerclone v2, BUT any of the custom ROMs are installed exactly the same way. I do not list links to all of them, so you might have to find the one you want when you get to that stage if you do not want to use Gingerclone.
While I did originally update to GCv2, I had some issues and we're not sure why. So I changed over to CleanFusion v3. It's much more similar to the stock system in looks and all. I would also suggest, make sure you have a backup of all your stuff (contacts in particular) off your sim, on another card/phone/google/whatever. Most of my contacts dissapeared, we think because it's an old sim that likes to be wonky with some of the new phones. But still, be forewarned.
After the device is rooted, you can use MyBackup Root (free in the market) to backup all your applications and data to your SD, which you can then copy to your computer as well.
---
First, download SuperOneClick from http://shortfuse.org/ . Whatever the most recent version is.
The file you downloaded of SuperOneClick is a .zip file. You'll need to extract it to its own folder (if you don't have a program to do this, download .7zip here http://www.7-zip.org/download.html).
Download the Samsung drivers ~ In this case, the Samsung Vibrant drivers work for the Sidekick 4g. Drivers found under the 'software' tab here http://www.samsung.com/us/support/downloads/SGH-T959ZKDTMB
Install the Drivers to your computer and reboot it.
---
With the phone unplugged, enable USB Debugging. On the home screen of the phone select Settings > Applications > Development and then select USB Debugging so that a Check appears on the selection box.
When enabled, connect the phone to your PC.
---
Run SuperOneClick (the .exe file) which is on your computer. When the program has opened click 'Root'.
The program will pop through a bunch of windows, if it asks to install something like mine did, say yes. When it finishes, it asks if you would like to test it. Say yes.
Your phone is now rooted.
I disconnected from the computer and rebooted the phone (turn off and then on again).
Plug the phone back into the computer.
---
Next step is to go to this thread here http://forum.xda-developers.com/showthread.php?t=1124453
[EDIT/UPDATE] Krylon360's files moved or something, find the recovery.zip and update.zip here http://db.androidspin.com/Developer_Display.asp?DeveloperID=248
I was advised to go through the first post, as I’d learn more. But apparently there’s an automated script somewhere in this same thread if that’s your preference. I quite enjoyed learning how to access everything myself, in case I ever need to use it for something.
You will need Root Explorer ($3.99) from the android market. I tried Astro File Manager, and it’s lovely, except for the fact that you need to buy the Pro edition in order to access the /system files. >:C
(Basically you need a file manager on the phone that will allow you to copy files into your /system/bin file on the phone.)
Download both of the files listed in the thread I just gave. You will mount your SD card (on the home page of your phone, drop down that little black menu thing at the very top, select USB storage and enable it).
Place the file ‘recovery’ and the zipped file ‘update’ onto your SD card. Nowhere in particular, just in that main area that appears when you open the SD.
Now is a good time to put the ROM you want to flash onto the SD as well.
[EDIT]: Please keep in mind I'm not a developer and I don't plan to live on this forum. So new ROMs will be developed and I probably won't be around to update this list. So make sure to look around for threads about new ROMs to start with or update to. ^..^
Those suggested to me were :
Gingerclone: Apparently themed very green.
http://forum.xda-developers.com/showthread.php?t=1231021 (check Dev forum for a newer version)
TouchMIUIwiz: Very similar to Gingerclone, but more greys.
http://forum.xda-developers.com/showthread.php?t=1207328 (check Dev forum for a newer version)
Smooth Maximus: Themed very blue and black
http://forum.xda-developers.com/showthread.php?t=1158250 (check Dev forum for a newer version)
Clean Fusion: Clean and pretty.
http://forum.xda-developers.com/showthread.php?t=1204131 (check Dev forum for a newer version)
Of course, there are likely other ones out there, these are just the main ones my supporter knows intimately enough to note. He had a really hard time recommending just one. XD
Whatever you go with, it's always a good idea to have a backup of your phone system, which we go through later in the guide when you need it, so don't fret.
---
Feel free to use whatever new ROM you'd like, either listed above or another on the Development Forums, I was told all the following steps would be exactly the same, just using a different custom ROM.
I’m going with Gingerclone v2, as I was informed that while it did crash on my helper once, it seems to be overall the most consistent one that he’s tried.
The above linked thread for GingerClone has two files, I’m using the top one, as I do not have the original release installed.
This .zip file you just downloaded can be copied onto the SD root menu (the main menu available when you access the SDcard from 'My Computer').
---
Unmount your SDcard from the computer (that little black bar on the top of your phone's home screen, turn off the usb connection). Disconnected from the computer even if you want.
---
Open Root Explorer. Navigate to access the SD card (it has its own file in the root menu you start off in). Copy the ‘recovery’ file, navigate back and paste it into /system/bin (to get there, navigate back by tapping the top option 'parent directory', select 'system', select 'bin', paste it in there). Do not delete the original 'recovery' file in here. It will automatically ask if you want to overwrite the file. Say yes.
If it give you the error “you cannot paste here because the file system is read-only.’ Then at the top, tap the “R/W” square so that it then reads “R/O”. Paste again, select ‘yes’ to overwrite the file.
---
Next you’ll turn the phone off so you can boot into recovery mode. To do this, while turned off, you’ll hold the volume up and volume down buttons together, then, while holding them, press the power button. Let go of all three together once the screen starts up.
If you get some blue text, a little warning looking sign over the droid dude, and some yellow text, then you're in the right place.
In here use the volume up and down buttons to navigate through the options and use the power button to select something.
---
Highlight “reinstall packages” and use the power button to select it once it’s highlighted.
You’ll have orange text now. So first, let’s backup the phone, JUST IN CASE something goes funky. (nothing went wonky for me)
Navigate to ‘backup and restore’ and select it.
Navigate to ‘backup’ and select it.
It should be backing up now, with a little nasty coloured yellow progress bar at the bottom.
Once the backup is done, you should be back at the original orange texted screen.
---
This next bit is important:
Navigate to ‘mounts and storage’ and select it.
It should read:
unmount /chache
mount /data
mount /sdcard
unmount /system
(My phone said “unmount /sdcard” which isn't important. The only thing that NEEDS to read correctly is 'unmount /system' - If it says 'mount system', you need to navigate to it and select it so that it reads correctly)
If your list reads like the above, then you’re good. Click the ‘back’ button, which is the arrow on the bottom left corner of the phone (if you're holding it the way I am. ;p).
---
Navigate to ‘wipe data/factory reset’ and select it.
Navigate to the ‘yes -- delete all user data’ and select it.
Repeat this twice more. (That’ll be three times total.)
Navigate to ‘wipe cache partition’ and select it.
Navigate to ‘yes -- Wipe Cache’ and select it.
Repeat this twice more. (Again, three times total.)
Next, navigate to ‘advanced’ and select it.
Navigate to ‘wipe Dalvik Cache’ and select it.
Repeat this twice more. (Three times total.)
I was told to go back to the mounts and storage menu to make sure it still says ‘unmount /system’. Mine did still say this. If it doesn't read correctly, it won't boot right. Fix it if you need to.
---
Next I’m going to install GingerClone.
To reiterate, if you want to use a different custom ROM, go for it, the steps are the exact same, you just need the correct ROM download (which should be a .zip file).
Go back up a menu, navigate to ‘install zip from sdcard’ and select it.
Navigate to ‘choose zip from sdcard’ and select it.
Navigate to the GingerClone.zip (the name is longer than that, but you should know what I’m talking about.) and select it.
It’ll go through installing GingerClone now, with that ugly yellow progress bar at the bottom again.
When it’s done installing. Go back again to the ‘mounts and storage’ menu to check that the system is still unmounted (should still read ‘unmount /system’) Mine did mount my SDcard, but that’s fine. If it reads ‘mount /system’ then navigate to it and select it so that it reads ‘unmount /system’.
Good job so far! Go back to the main menu and navigate to ‘reboot system now’ and select it.
---
Bit odd seeming. It did take longer to boot up. First my phone talked to me, which I was told was the Voodoo LagFix. Then it started blowing sparklers into an X which is also good as that means it’s booting up. (I'm not sure, but it might look different for other custom ROMs.)
The normal screen that’s still ‘locked’ before you would go to the home screen should have the options to slide up (Start Using) or down (Tune a few things first). I was told to go ahead and do the tune bit and “just hit next a buncha times and get rid of it.” ;p It’s pretty straight forward setup stuff.
In case you’re wondering, that ‘update.zip’ that you downloaded earlier when you downloaded the recovery file? Well, when you reinstalled packages, it did that one automatically. So it's taken care of, no worries.
From now on, if Voodoo LagFix is on and you go into recovery mode (when you turned it off and held the volume buttons and turned it back on) then the text should be red. You can check if you want though it's not necessary, the red just indicates that Voodoo LagFix is indeed installed.
I was told that there are options in recovery mode to disable Voodoo LagFix or to convert back to the original file system. I haven't messed with them and don't plan to so long as this keeps working nice for me.
So. Yay! Have fun exploring and customizing your improved system!
I may have typed this sucker up, but basically all credit goes to the hours of support given to me by yogi2010 who is entirely awesome.
If there *is* anything that's a bit off or inaccurate, place the blame on me as interpreter, I just wrote out what I did, and if I thought it might be necessary, how something worked to the best of my very limited knowledge.
Great work!
I tried installing a new rom on my sk4g a few months ago and couldn't get it to work so i left it alone in fear of bricking my phone. I finally got the balls to try again and used this link and it worked perfectly. Thanks so much and good work yogi2010 and Kediil!
DirtyNateDog said:
I tried installing a new rom on my sk4g a few months ago and couldn't get it to work so i left it alone in fear of bricking my phone. I finally got the balls to try again and used this link and it worked perfectly. Thanks so much and good work yogi2010 and Kediil!
Click to expand...
Click to collapse
Glad you got it all working!
Why do you think posting a noob/how to guide after we have like 4 is a good idea? How many of these guides do we need already? This forum is getting filled with junk and overposting
xmeatizmurderx said:
Why do you think posting a noob/how to guide after we have like 4 is a good idea? How many of these guides do we need already? This forum is getting filled with junk and overposting
Click to expand...
Click to collapse
If there's another guide that has all the steps, from very beginning to finish, I'd suggest you find someone to sticky it. I spent three days going through the forums and could not find a single guide that took me through everything, step by step, which is why I put this together, assuming that because I could not find it, it did not exist.
Be it this one or another, there needs to be a guide for a know-nothing-noob such as myself to follow without having to hunt down the separate bits and hope I put them together in the right order, and it needs to be stickied in the top of one of the forums, preferably in the General or Development area.
that has all the steps, from very beginning to finish, I'd suggest you find someone to sticky it. I spent three days going through the forums and could not find a single guide that took me through everything, step by step, which is why I put this together, assuming that because I could not find it, it did not exist.
Be it this one or another, there needs to be a guide for a know-nothing-noob such as myself to follow without having to hunt down the separate bits and hope I put them together in the right order, and it needs to be stickied in the top of one of the forums, preferably in the General or Development area.[/QUOTE]
http://forum.xda-developers.com/showthread.php?t=1135634
It's the 3rd post down in the development section and takes everything from start to finish, you obviously didn't search very hard
xmeatizmurderx said:
Why do you think posting a noob/how to guide after we have like 4 is a good idea? How many of these guides do we need already? This forum is getting filled with junk and overposting
Click to expand...
Click to collapse
Wow, I find that comment extremely rude and out of place. I personally find this guide much easier to follow, and many may agree with me. I don't see anything wrong with having different tutorials on the same operation. Look around, I guarantee you will see it happening everywhere, not just on these forums. So long as it doesn't purposely mislead people, I don't see the harm in it. In fact, it seems to me that, your comment is the one adding more 'junk' to the forums. As you have now posted a reply that does not benefit the community at all, instead its provoking unnecessary posting. If it is so bothersome to you, and if this post really falls into your 'junk' category, discuss it in private if your position in these forums allows it, but not here where you are making a comment which puts down someones good-hearted attempt to help out the community.
@Kediil Thank you for this post. There can never be 'too many' helpful people.
xmeatizmurderx said:
http://forum.xda-developers.com/showthread.php?t=1135634
It's the 3rd post down in the development section and takes everything from start to finish, you obviously didn't search very hard
Click to expand...
Click to collapse
I did go through, and I did see that one, but I had no idea what it was. The name of the thread didn't make it obvious to me, who knew absolutely nothing, that it was a guide. I didn't know what rooting was, or if I needed to do it, or how (for all there's a guide within the rooting thread). I didn't know what CWM was. I didn't know what a kernal actually was, or how to 'flash' it.
Looking at the guide you linked, if you know more or less what you're doing, then it could prove helpful, if a bit blunt. But coming at it from the perspective of knowing absolutely nothing, it didn't help me in the least.
I know it can be difficult to know something and have to deal with people who know nothing, but if there's no sure-fire, solid way for the new person to learn without needing a knowledgeable person to help, then you'll just continue to be needlessly frustrated.
@ merman123 Thank you very much for the support. ^..^ It's already helped at least one person, so I'm satisfied. There will always be haters or frustration or drama. It's the internet! ;p
Kediil said:
I did go through, and I did see that one, but I had no idea what it was. The name of the thread didn't make it obvious to me, who knew absolutely nothing, that it was a guide. I didn't know what rooting was, or if I needed to do it, or how (for all there's a guide within the rooting thread). I didn't know what CWM was. I didn't know what a kernal actually was, or how to 'flash' it.
Looking at the guide you linked, if you know more or less what you're doing, then it could prove helpful, if a bit blunt. But coming at it from the perspective of knowing absolutely nothing, it didn't help me in the least.
I know it can be difficult to know something and have to deal with people who know nothing, but if there's no sure-fire, solid way for the new person to learn without needing a knowledgeable person to help, then you'll just continue to be needlessly frustrated.
@ merman123 Thank you very much for the support. ^..^ It's already helped at least one person, so I'm satisfied. There will always be haters or frustration or drama. It's the internet! ;p
Click to expand...
Click to collapse
Posting several threads that say basically the same thing is annoying and clutters the threads making it hard for people to find what they need. It has also annoyed the **** out of a lot of us on here and driven away several developers for this phone because noobs come on and post new threads constantly about the same couple of things.
Being a noob is fine, we all are at some point but learning to search and pm some of the senior members for help will help keep the forums clean and the devs happy, I find it hard to believe you came across xda without knowing what rooting was but honestly I don't care, just please be mindfull and spend time searching thoroughly before posting.
xmeatizmurderx said:
Posting several threads that say basically the same thing is annoying and clutters the threads making it hard for people to find what they need. It has also annoyed the **** out of a lot of us on here and driven away several developers for this phone because noobs come on and post new threads constantly about the same couple of things.
Being a noob is fine, we all are at some point but learning to search and pm some of the senior members for help will help keep the forums clean and the devs happy, I find it hard to believe you came across xda without knowing what rooting was but honestly I don't care, just please be mindfull and spend time searching thoroughly before posting.
Click to expand...
Click to collapse
I came across XDA by typing 'sidekick 4g lag fix' into google, obviously because I was experiencing lag and was hoping for a fix. One of XDA's threads was the first thing listed and people here seemed to know what they were doing and talking about here. I did spend quite a lot of time searching. I would gladly take full fault for posting something unneeded if anyone would but show me a link to a full, step by step, easy to follow guide. *shrugs* I'll eat my words if there is one.
I need help
So I'm trying to run a custom rom on my new SK4g but no matter what I do, I keep softbricking it... just gets stuck on the sidekick logo during boot. I've followed this guide STEP BY STEP a few times and with different roms, same result. After the rom install is complete I confirm the mounts are correct and then reboot to system but it never gets to system. I end up having to start over from stock via ODIN
HELP HELP HELP... what am I doing wrong. The only POSSIBLE thing I can think of is when it comes time to overwrite the recovery binary, I use adb shell and mount the system with:
Code:
# mount -o remount,rw -t ext3 /dev/block/mmcblk0p25 /system
then I copy the file with:
Code:
# cp -f /mnt/sdcard/recovery /system/bin/
Code:
# reboot recovery
please someone help me and tell me what im doing wrong
not too sure what's wrong, but if you are flashing ROMs, you probably are getting into ClockworkMod properly. are you checking your mounts BEFORE you install the ROM as well as after?
xmeatizmurderx said:
Posting several threads that say basically the same thing is annoying and clutters the threads making it hard for people to find what they need. It has also annoyed the **** out of a lot of us on here and driven away several developers for this phone because noobs come on and post new threads constantly about the same couple of things.
Being a noob is fine, we all are at some point but learning to search and pm some of the senior members for help will help keep the forums clean and the devs happy, I find it hard to believe you came across xda without knowing what rooting was but honestly I don't care, just please be mindfull and spend time searching thoroughly before posting.
Click to expand...
Click to collapse
Wow, your a real ass. I think this guide is probably the best one here. Very clean and very thorough. Its not people like him that cause developers to leave. Its people like you with no respect and a big attitude. And a HUGE head!!
Sent from my SGH-T839 using xda premium
Thanks so much for this post
Thanks for explaining in layman's terms how to do this. It is very helpful for me and I too had trouble making sense of the other how-to posts. With something as sensitive as flashing hardware it is really important for a novice to clearly understand the steps. I for one really appreciate and applaud your efforts Kediil and Yogi2010!
I'm glad that this has helped some people! I know for those that have been around here a while, it is basically the same thing we already know, but I do think this guide was very clearly written, and is helpful to those who are completely new to this and don't have any idea where to start, and just want to get their phones rooted and modded. kudos to kediil for the great write-up!
I get mad everytime i try to do this because whenever i try to reinstall the packages it just says failed to verify whole signature or whatever then it aborts it , help me please , im tired of this **** ass stock rom
JayNycWepa said:
I get mad everytime i try to do this because whenever i try to reinstall the packages it just says failed to verify whole signature or whatever then it aborts it , help me please , im tired of this **** ass stock rom
Click to expand...
Click to collapse
It sounds like the modified recovery didn't get properly moved into system/bin. Have you followed the steps and pasted the recovery file you downloaded into system/bin, replacing the recovery file that was already there?
Kediil said:
I came across XDA by typing 'sidekick 4g lag fix' into google, obviously because I was experiencing lag and was hoping for a fix. One of XDA's threads was the first thing listed and people here seemed to know what they were doing and talking about here. I did spend quite a lot of time searching. I would gladly take full fault for posting something unneeded if anyone would but show me a link to a full, step by step, easy to follow guide. *shrugs* I'll eat my words if there is one.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1206991
Like I said, SEARCH BEFORE POSTING
It took me all of 10 seconds to find this, it's on the second page of the development section and there are only 4 pages. It took you far longer to type this up than it would have to search.
The reason we don't have stickies is because moderators don't pay attention to us because we have no developers anymore (this is about to change though one of our members was recently sent an invite)
If this were any other phone this overposting wouldn't be tolerated, you guys treat the forums like it's facebook and would rather start a thread than take the time to search for your answer, and it clutters everything up with useless threads. When I joined XDA and had a G1 I didn't post anything for like 2 years because I was able to find the answers by searching.
I am an asshole, so get used to it but I mean you no harm. I am trying to give advice because I have been on here since day one and personally seen devs leave out of irritation with the members lack of forum etiquette. If we can all try and keep the forums clean then we have a better chance of getting support, and this will also help you guys in the future when you move onto more popular devices. If you think I'm a **** you have no idea what some of the senior members can be like lol
---------- Post added at 05:51 PM ---------- Previous post was at 05:22 PM ----------
dw9906 said:
Wow, your a real ass. I think this guide is probably the best one here. Very clean and very thorough. Its not people like him that cause developers to leave. Its people like you with no respect and a big attitude. And a HUGE head!!
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
That's what she said
Alright I'm done trolling now
xmeatizmurderx said:
http://forum.xda-developers.com/showthread.php?t=1206991
Eat 'em up bro
Like I said, SEARCH BEFORE POSTING
Click to expand...
Click to collapse
Um, you posted a link to a FAQ, not a step by step guide...
xmeatizmurderx said:
Alright I'm done trolling now
Click to expand...
Click to collapse
Quit trolling, noone is impressed. Unlike you, Kediil is actually adding to this forum.
vitriolix said:
Um, you posted a link to a FAQ, not a step by step guide...
Quit trolling, noone is impressed. Unlike you, Kediil is actually adding to this forum.
Click to expand...
Click to collapse
faq, guide, whatever
I have posted several links that tell you in plain terms how to root and put roms on from stock. If people find this one easier to read for some reason then good for them, I don't have the power to moderate the forums
My point has been made, I don't know why you are responding to me if you don't like what I have to say
P.S.
I have sent in a request to have this thread stickied for you guys