Cannot find download button on the Andy Market..!!! - Android Software/Hacking General [Developers Only]

Hi guys,..
Im trying to put access to android market via my ZT-180. I have followed the tutorial from how to flash, get the android ID, and copy it into the slate. I am very confidence that it works well as i ddidnt accross any error message at all.
But when it comes to test it on the android market, i have these problem:
1. On the actual site (opened from laptop) there is a vertical scroll to reveal more options of the apps. This scroll, is not viewable on my ZT for some reason.
2. I cannot locate any form of button to download or to buy, or any kind of button in that matter. All i can see is the app detail, with couple of pictures, developer info and thats it. No matter how hard i tap the bloody screen on those 2 images, nothing happen. I read somewhere that suggest ppl with the same problem to look for some push download or something like that, but again, i cannot find any of these..
Any help matey..? ta

49 views and not even one knows the answer,..i thought you lot are experts..

Related

program to complete multiple apps/actions?

does anyone know of a program to perform multiple actions or launch multiple apps?
i want something which would allow me to create a exe file (which i can put in start menu or assign to a button) which will complete several actions after being selected.
such as: wifi on, launch ie or bluetooth on, launch wmp or close all, power off... etc,
you get the idea i hope
mortscript
Midget_1990 said:
mortscript
Click to expand...
Click to collapse
i should have expected that but thanks
however, i was hoping for something with a ui, and without a 60 page manual which looks to complicated for me on the first contents page
i guess i'll have to start reading the accumulation thread and manual a lot
Hi and thanks guys,
I finally started using mortscript, it's actually very simple to use (at least for what i want) it just looks very difficult to use when you read the site and the manual. Though it did take me all of today to work out why i could not get vjvolubilis to work (i missed a "," out ) and a while to create .mscr instead of .txt.
But it's a shame it only supports system, and not ring volume changing.
I love this site - every time i think my ppc is as good as i can get it, something else pops up to make it better

HD2 book collection database software sought

I got my new HD2 and was delighted, but then tried to get the software that I have been using previously to work on it.
As I travel around and look in second hand book and record shops, I am never totally sure from memory whether i have a particular book or cd. Publishers keep changing the covers and synopses.
On my Psion, it had as standard a lovely card database / rolodex type of program. It was easy to input, easy to search.
When I moved to the hx4700 on windows 2003SE I lost that. Eventually I found Data On The Run which is fully access compatible. So I've converted all of my lists to access, and was happy enough. It wasn't great as it tries to get too much on, and portrait only.
Now on the HD2, the software does not like fingers, only styluses. Scrolling is virtually impossible, as it won't drag to scroll. The pop out scroll bar helper does not show. The developer is one guy and hasn't time to continue developing.
I've looked at stuff like Bookbag plus and someone mentioned "My Collection" but I cannot find it anywhere on the net. There are serious commercial pieces of software that are in effect full database programs, but that is a sledgehammer to crack a walnut.
I know this may only help in the short term, and doesn't solve the software issue.
Have you changed the original theme on the device? If so the Pop out function on the theme is lost in order to return it without going back to the original theme you could try this. please remember to backup
Hope this helps in the short term.
Try this
Try ListPro.. it's a great application..
Neville.Holland said:
I know this may only help in the short term, and doesn't solve the software issue.
Have you changed the original theme on the device? If so the Pop out function on the theme is lost in order to return it without going back to the original theme you could try this. please remember to backup
Hope this helps in the short term.
Click to expand...
Click to collapse
Thanks for hte idea, but Nope, original theme. Pop out scroll is there for other apps.
Klaus1960 said:
Try ListPro.. it's a great application..
Click to expand...
Click to collapse
THanks. I had seen Collectorz which has templates for this, but had not found listpro. It looks a fairly steep learning curve, and I need to import my existing lists. However, its great advantage is that it is only one program that covers a multitude of lists, so i won;t be paying out twice or three times for basically the same thing.
I've installed and imported my book list, so can now try and get it synchronised. I had to install the cab file separately. I can set up the synchronisation in the Windows MObile Device Centre, but that has to be done through "files" and unless i have missed something that only lets me synchronise to the machine, not the storage card. That is no damn good.

App To Take Screenshots on my phone?

What's the app called that lets you take a screenshot of your phone?
I have a HTC HD2
Moved as not software release.
Shake & Save / Capture and if want to via sync you can use My Mobiler.
stylez said:
Moved as not software release.
Shake & Save / Capture and if want to via sync you can use My Mobiler.
Click to expand...
Click to collapse
Sorry about posting in the wrong forum still getting the hang of it here
Thank you where can I find My Mobiler?
Gypsydonny said:
Sorry about posting in the wrong forum still getting the hang of it here
Thank you where can I find My Mobiler?
Click to expand...
Click to collapse
you can find shake and save here
http://www.extreme-apps.com/
Gypsydonny said:
Sorry about posting in the wrong forum still getting the hang of it here
Thank you where can I find My Mobiler?
Click to expand...
Click to collapse
remember, google is your friend
My Mobiler site is down at the moe it appears, so try another time, but shake and save is good!
MyMobiler site is up & running (link is in my signature)
I like it a lot for screen shots & also does video file from display, very useful tool once you have spent some time using & learning with it.
Download Windows Developer Power Tools from
http://www.microsoft.com/downloads/...d6-1dcc-47aa-ab28-6a2b006edfe9&displaylang=en
It's the WindowsMobilePowerTools.msi at the bottom of the page. It will add Activesync Remote Display to your Start Menu. Connect your device with ActiveSync and run the tool. The device's screen appears in the window. With it active, use Alt-PrintScreen to copy it to the clipboard.
P.S. This stuff was originally designed for WM2003 / CE 4.2. To get it to work on WM 5.0 onwards, you have to do some hacking around. Read the README.TXT file that gets installed into the
C:\Program Files\Windows Mobile Developer Power Toys\ActiveSync_Remote_Display
directory. The problem is caused by the fact that CPU's have moved on and the software has been left to wither on the vine. Your WM 5/6/6.5 device will, more than likely, have an ARM based CPU in it, but the software will not recognise it, as such. Read the README.TXT file first, but even then, there is an error in it. The program you run on the PC is "ASRDisp - m" not "cerhost2.exe -m" as mentioned in the file. You will also have to connect the PPC program using the name of your PC.(From My Computer -> Properties) It's a lot of messing about, but it does work, as can be seen by the attached.
The other method I sometimes use is to run an emulator image. PrintScrn or ALT-PrintScrn cannot be used to trap the current window as the emulator filters them as part of its own input stream and ignores them. Windows never gets to see it. You have to move the focus off the emulator then use PrintScrn to trap the whole display image, then use Paint to cut out the emulator area that you really want, and then paste it where you really need it. More messing about.........
thanks guys for heelping me out. Kinda skeptic on googling downloads I don't wanna brick my phone.
Gypsydonny said:
thanks guys for heelping me out. Kinda skeptic on googling downloads I don't wanna brick my phone.
Click to expand...
Click to collapse
Download Shake & Save HERE
Download MyMobiler HERE . Manual for MyMobiler
Direct from developers sites, you won't brick your device & help is available if you need it ...

Ten random questions about my TP2.

These are things where I searched but I can't find good fixes. Maybe my searching skills suck
1. Is there a better [and free] torrent program than wmtorrent? Mine has some bug where the torrent never starts, it's just stuck in queue forever. I have to reinstall it to get a torrent going. Sometimes more than once. Also it's really clunky.
2. I was hoping assign my back key to some other function. I found the setting for assigning keys to programs but the only key I can bind is the call button. I got hbutton and it also offers nothing except the call button. I also found the registry key where buttons are listed and same problem. How can I do this?
3. Occasionally I get compressed EXE's instead of CAB files to install something. I hate having to find a PC to unzip them and then transfer the cab. Is there a program that unzips these?
4. Sometimes programs seem to overload the phone and I can't even shut it off anymore. If I keep wmtorrent going for a couple of hours, for example, or the skyfire browser. The hang up key doesn't respond and I have to pop the battery out. Is there any trick to avoid this? Some memory management app or something?
5. Opera mobile is clean and fast and handles some flash, but chokes on e.g. flash streaming video. Also it has a setting (stupidly hidden in opera:config) to report the user agent as a desktop browser, which should give me the full version of websites, right? But the websites aren't fooled. They still send me the mobile version. Skyfire handles flash better and seems to fool websites better, but see #4. Also the keyboard is retarded, it either isn't offered where it should be or it's some custom keyboard instead of my usual (swype). So... is there a better browser that does it all correctly? Anyone got a real fix for the opera user agent thing?
6. I saw a custom rom with a task manager built into the corner. You could close the app or switch. I think it was the psyke rom. I would like something like this but without installing a totally new ROM. Right now I use hang up --> Task Manager --> then double tap the program I want to switch to. Alternately is there something where X-ing out of a program totally kills the process instead of just bringing you back to home screen?
7. I install every single program to my storage card, but still have low memory in my main memory. I got a warning recently on it. I found a big 35 meg file in google maps cache, anywhere else I should look? There an app to deal with this?
8. What's the difference between the weather and animated wallpapers? Both of them seem to animate a little. I'm not seeing any weather info on my home screen and some of these wallpapers seem unrelated to weather. What do I do to get weather going and do I really need to keep my wallpapers all separated? Also is there a format for the animated wallpapers? Are these animated gifs or what? Where should I get more?
9. How can I organize the start menu better? All I can do is long tap icons and then move to top. But what if I just want to move it up a bit but not to the very top?
10. What do some of the icons at the top mean? I have right and left pointing arrows where my wireless notification would be, does that mean I'm getting data? I've got all my processes closed but I've been seeing it for an hour. What's the tall triangle icon mean?
Also, I never got this answered but I'll throw in #11 anyway: any good tricks to preserving battery life? I wake up and by lunchtime my phone is done. That's nuts.

Noob Guide: How to - from stock phone to custom ROM: includes Bali/Voodoo Lagfix

Ok, for anyone who finds this. I'm writing out a quick guide for what I was led through. I've borrowed a few lines from some other threads as well
This guide will take an original stock SideKick 4g that has not otherwise been modified, flashed, etc and lead you through the steps to running a custom ROM. This should lead to a smoother running system with less lag, longer battery life, etc.
[Edit] I was pointed later to a nice FAQ by xmeatizmurderx, which, while not a guide, does have some questions answered you might have, along with some definitions and whatnot that might help make things clearer for you or if you just like know what it is something actually does or is. ^..^
I personally updated to Gingerclone v2, BUT any of the custom ROMs are installed exactly the same way. I do not list links to all of them, so you might have to find the one you want when you get to that stage if you do not want to use Gingerclone.
While I did originally update to GCv2, I had some issues and we're not sure why. So I changed over to CleanFusion v3. It's much more similar to the stock system in looks and all. I would also suggest, make sure you have a backup of all your stuff (contacts in particular) off your sim, on another card/phone/google/whatever. Most of my contacts dissapeared, we think because it's an old sim that likes to be wonky with some of the new phones. But still, be forewarned.
After the device is rooted, you can use MyBackup Root (free in the market) to backup all your applications and data to your SD, which you can then copy to your computer as well.
---
First, download SuperOneClick from http://shortfuse.org/ . Whatever the most recent version is.
The file you downloaded of SuperOneClick is a .zip file. You'll need to extract it to its own folder (if you don't have a program to do this, download .7zip here http://www.7-zip.org/download.html).
Download the Samsung drivers ~ In this case, the Samsung Vibrant drivers work for the Sidekick 4g. Drivers found under the 'software' tab here http://www.samsung.com/us/support/downloads/SGH-T959ZKDTMB
Install the Drivers to your computer and reboot it.
---
With the phone unplugged, enable USB Debugging. On the home screen of the phone select Settings > Applications > Development and then select USB Debugging so that a Check appears on the selection box.
When enabled, connect the phone to your PC.
---
Run SuperOneClick (the .exe file) which is on your computer. When the program has opened click 'Root'.
The program will pop through a bunch of windows, if it asks to install something like mine did, say yes. When it finishes, it asks if you would like to test it. Say yes.
Your phone is now rooted.
I disconnected from the computer and rebooted the phone (turn off and then on again).
Plug the phone back into the computer.
---
Next step is to go to this thread here http://forum.xda-developers.com/showthread.php?t=1124453
[EDIT/UPDATE] Krylon360's files moved or something, find the recovery.zip and update.zip here http://db.androidspin.com/Developer_Display.asp?DeveloperID=248
I was advised to go through the first post, as I’d learn more. But apparently there’s an automated script somewhere in this same thread if that’s your preference. I quite enjoyed learning how to access everything myself, in case I ever need to use it for something.
You will need Root Explorer ($3.99) from the android market. I tried Astro File Manager, and it’s lovely, except for the fact that you need to buy the Pro edition in order to access the /system files. >:C
(Basically you need a file manager on the phone that will allow you to copy files into your /system/bin file on the phone.)
Download both of the files listed in the thread I just gave. You will mount your SD card (on the home page of your phone, drop down that little black menu thing at the very top, select USB storage and enable it).
Place the file ‘recovery’ and the zipped file ‘update’ onto your SD card. Nowhere in particular, just in that main area that appears when you open the SD.
Now is a good time to put the ROM you want to flash onto the SD as well.
[EDIT]: Please keep in mind I'm not a developer and I don't plan to live on this forum. So new ROMs will be developed and I probably won't be around to update this list. So make sure to look around for threads about new ROMs to start with or update to. ^..^
Those suggested to me were :
Gingerclone: Apparently themed very green.
http://forum.xda-developers.com/showthread.php?t=1231021 (check Dev forum for a newer version)
TouchMIUIwiz: Very similar to Gingerclone, but more greys.
http://forum.xda-developers.com/showthread.php?t=1207328 (check Dev forum for a newer version)
Smooth Maximus: Themed very blue and black
http://forum.xda-developers.com/showthread.php?t=1158250 (check Dev forum for a newer version)
Clean Fusion: Clean and pretty.
http://forum.xda-developers.com/showthread.php?t=1204131 (check Dev forum for a newer version)
Of course, there are likely other ones out there, these are just the main ones my supporter knows intimately enough to note. He had a really hard time recommending just one. XD
Whatever you go with, it's always a good idea to have a backup of your phone system, which we go through later in the guide when you need it, so don't fret.
---
Feel free to use whatever new ROM you'd like, either listed above or another on the Development Forums, I was told all the following steps would be exactly the same, just using a different custom ROM.
I’m going with Gingerclone v2, as I was informed that while it did crash on my helper once, it seems to be overall the most consistent one that he’s tried.
The above linked thread for GingerClone has two files, I’m using the top one, as I do not have the original release installed.
This .zip file you just downloaded can be copied onto the SD root menu (the main menu available when you access the SDcard from 'My Computer').
---
Unmount your SDcard from the computer (that little black bar on the top of your phone's home screen, turn off the usb connection). Disconnected from the computer even if you want.
---
Open Root Explorer. Navigate to access the SD card (it has its own file in the root menu you start off in). Copy the ‘recovery’ file, navigate back and paste it into /system/bin (to get there, navigate back by tapping the top option 'parent directory', select 'system', select 'bin', paste it in there). Do not delete the original 'recovery' file in here. It will automatically ask if you want to overwrite the file. Say yes.
If it give you the error “you cannot paste here because the file system is read-only.’ Then at the top, tap the “R/W” square so that it then reads “R/O”. Paste again, select ‘yes’ to overwrite the file.
---
Next you’ll turn the phone off so you can boot into recovery mode. To do this, while turned off, you’ll hold the volume up and volume down buttons together, then, while holding them, press the power button. Let go of all three together once the screen starts up.
If you get some blue text, a little warning looking sign over the droid dude, and some yellow text, then you're in the right place.
In here use the volume up and down buttons to navigate through the options and use the power button to select something.
---
Highlight “reinstall packages” and use the power button to select it once it’s highlighted.
You’ll have orange text now. So first, let’s backup the phone, JUST IN CASE something goes funky. (nothing went wonky for me)
Navigate to ‘backup and restore’ and select it.
Navigate to ‘backup’ and select it.
It should be backing up now, with a little nasty coloured yellow progress bar at the bottom.
Once the backup is done, you should be back at the original orange texted screen.
---
This next bit is important:
Navigate to ‘mounts and storage’ and select it.
It should read:
unmount /chache
mount /data
mount /sdcard
unmount /system
(My phone said “unmount /sdcard” which isn't important. The only thing that NEEDS to read correctly is 'unmount /system' - If it says 'mount system', you need to navigate to it and select it so that it reads correctly)
If your list reads like the above, then you’re good. Click the ‘back’ button, which is the arrow on the bottom left corner of the phone (if you're holding it the way I am. ;p).
---
Navigate to ‘wipe data/factory reset’ and select it.
Navigate to the ‘yes -- delete all user data’ and select it.
Repeat this twice more. (That’ll be three times total.)
Navigate to ‘wipe cache partition’ and select it.
Navigate to ‘yes -- Wipe Cache’ and select it.
Repeat this twice more. (Again, three times total.)
Next, navigate to ‘advanced’ and select it.
Navigate to ‘wipe Dalvik Cache’ and select it.
Repeat this twice more. (Three times total.)
I was told to go back to the mounts and storage menu to make sure it still says ‘unmount /system’. Mine did still say this. If it doesn't read correctly, it won't boot right. Fix it if you need to.
---
Next I’m going to install GingerClone.
To reiterate, if you want to use a different custom ROM, go for it, the steps are the exact same, you just need the correct ROM download (which should be a .zip file).
Go back up a menu, navigate to ‘install zip from sdcard’ and select it.
Navigate to ‘choose zip from sdcard’ and select it.
Navigate to the GingerClone.zip (the name is longer than that, but you should know what I’m talking about.) and select it.
It’ll go through installing GingerClone now, with that ugly yellow progress bar at the bottom again.
When it’s done installing. Go back again to the ‘mounts and storage’ menu to check that the system is still unmounted (should still read ‘unmount /system’) Mine did mount my SDcard, but that’s fine. If it reads ‘mount /system’ then navigate to it and select it so that it reads ‘unmount /system’.
Good job so far! Go back to the main menu and navigate to ‘reboot system now’ and select it.
---
Bit odd seeming. It did take longer to boot up. First my phone talked to me, which I was told was the Voodoo LagFix. Then it started blowing sparklers into an X which is also good as that means it’s booting up. (I'm not sure, but it might look different for other custom ROMs.)
The normal screen that’s still ‘locked’ before you would go to the home screen should have the options to slide up (Start Using) or down (Tune a few things first). I was told to go ahead and do the tune bit and “just hit next a buncha times and get rid of it.” ;p It’s pretty straight forward setup stuff.
In case you’re wondering, that ‘update.zip’ that you downloaded earlier when you downloaded the recovery file? Well, when you reinstalled packages, it did that one automatically. So it's taken care of, no worries.
From now on, if Voodoo LagFix is on and you go into recovery mode (when you turned it off and held the volume buttons and turned it back on) then the text should be red. You can check if you want though it's not necessary, the red just indicates that Voodoo LagFix is indeed installed.
I was told that there are options in recovery mode to disable Voodoo LagFix or to convert back to the original file system. I haven't messed with them and don't plan to so long as this keeps working nice for me.
So. Yay! Have fun exploring and customizing your improved system!
I may have typed this sucker up, but basically all credit goes to the hours of support given to me by yogi2010 who is entirely awesome.
If there *is* anything that's a bit off or inaccurate, place the blame on me as interpreter, I just wrote out what I did, and if I thought it might be necessary, how something worked to the best of my very limited knowledge.
Great work!
I tried installing a new rom on my sk4g a few months ago and couldn't get it to work so i left it alone in fear of bricking my phone. I finally got the balls to try again and used this link and it worked perfectly. Thanks so much and good work yogi2010 and Kediil!
DirtyNateDog said:
I tried installing a new rom on my sk4g a few months ago and couldn't get it to work so i left it alone in fear of bricking my phone. I finally got the balls to try again and used this link and it worked perfectly. Thanks so much and good work yogi2010 and Kediil!
Click to expand...
Click to collapse
Glad you got it all working!
Why do you think posting a noob/how to guide after we have like 4 is a good idea? How many of these guides do we need already? This forum is getting filled with junk and overposting
xmeatizmurderx said:
Why do you think posting a noob/how to guide after we have like 4 is a good idea? How many of these guides do we need already? This forum is getting filled with junk and overposting
Click to expand...
Click to collapse
If there's another guide that has all the steps, from very beginning to finish, I'd suggest you find someone to sticky it. I spent three days going through the forums and could not find a single guide that took me through everything, step by step, which is why I put this together, assuming that because I could not find it, it did not exist.
Be it this one or another, there needs to be a guide for a know-nothing-noob such as myself to follow without having to hunt down the separate bits and hope I put them together in the right order, and it needs to be stickied in the top of one of the forums, preferably in the General or Development area.
that has all the steps, from very beginning to finish, I'd suggest you find someone to sticky it. I spent three days going through the forums and could not find a single guide that took me through everything, step by step, which is why I put this together, assuming that because I could not find it, it did not exist.
Be it this one or another, there needs to be a guide for a know-nothing-noob such as myself to follow without having to hunt down the separate bits and hope I put them together in the right order, and it needs to be stickied in the top of one of the forums, preferably in the General or Development area.[/QUOTE]
http://forum.xda-developers.com/showthread.php?t=1135634
It's the 3rd post down in the development section and takes everything from start to finish, you obviously didn't search very hard
xmeatizmurderx said:
Why do you think posting a noob/how to guide after we have like 4 is a good idea? How many of these guides do we need already? This forum is getting filled with junk and overposting
Click to expand...
Click to collapse
Wow, I find that comment extremely rude and out of place. I personally find this guide much easier to follow, and many may agree with me. I don't see anything wrong with having different tutorials on the same operation. Look around, I guarantee you will see it happening everywhere, not just on these forums. So long as it doesn't purposely mislead people, I don't see the harm in it. In fact, it seems to me that, your comment is the one adding more 'junk' to the forums. As you have now posted a reply that does not benefit the community at all, instead its provoking unnecessary posting. If it is so bothersome to you, and if this post really falls into your 'junk' category, discuss it in private if your position in these forums allows it, but not here where you are making a comment which puts down someones good-hearted attempt to help out the community.
@Kediil Thank you for this post. There can never be 'too many' helpful people.
xmeatizmurderx said:
http://forum.xda-developers.com/showthread.php?t=1135634
It's the 3rd post down in the development section and takes everything from start to finish, you obviously didn't search very hard
Click to expand...
Click to collapse
I did go through, and I did see that one, but I had no idea what it was. The name of the thread didn't make it obvious to me, who knew absolutely nothing, that it was a guide. I didn't know what rooting was, or if I needed to do it, or how (for all there's a guide within the rooting thread). I didn't know what CWM was. I didn't know what a kernal actually was, or how to 'flash' it.
Looking at the guide you linked, if you know more or less what you're doing, then it could prove helpful, if a bit blunt. But coming at it from the perspective of knowing absolutely nothing, it didn't help me in the least.
I know it can be difficult to know something and have to deal with people who know nothing, but if there's no sure-fire, solid way for the new person to learn without needing a knowledgeable person to help, then you'll just continue to be needlessly frustrated.
@ merman123 Thank you very much for the support. ^..^ It's already helped at least one person, so I'm satisfied. There will always be haters or frustration or drama. It's the internet! ;p
Kediil said:
I did go through, and I did see that one, but I had no idea what it was. The name of the thread didn't make it obvious to me, who knew absolutely nothing, that it was a guide. I didn't know what rooting was, or if I needed to do it, or how (for all there's a guide within the rooting thread). I didn't know what CWM was. I didn't know what a kernal actually was, or how to 'flash' it.
Looking at the guide you linked, if you know more or less what you're doing, then it could prove helpful, if a bit blunt. But coming at it from the perspective of knowing absolutely nothing, it didn't help me in the least.
I know it can be difficult to know something and have to deal with people who know nothing, but if there's no sure-fire, solid way for the new person to learn without needing a knowledgeable person to help, then you'll just continue to be needlessly frustrated.
@ merman123 Thank you very much for the support. ^..^ It's already helped at least one person, so I'm satisfied. There will always be haters or frustration or drama. It's the internet! ;p
Click to expand...
Click to collapse
Posting several threads that say basically the same thing is annoying and clutters the threads making it hard for people to find what they need. It has also annoyed the **** out of a lot of us on here and driven away several developers for this phone because noobs come on and post new threads constantly about the same couple of things.
Being a noob is fine, we all are at some point but learning to search and pm some of the senior members for help will help keep the forums clean and the devs happy, I find it hard to believe you came across xda without knowing what rooting was but honestly I don't care, just please be mindfull and spend time searching thoroughly before posting.
xmeatizmurderx said:
Posting several threads that say basically the same thing is annoying and clutters the threads making it hard for people to find what they need. It has also annoyed the **** out of a lot of us on here and driven away several developers for this phone because noobs come on and post new threads constantly about the same couple of things.
Being a noob is fine, we all are at some point but learning to search and pm some of the senior members for help will help keep the forums clean and the devs happy, I find it hard to believe you came across xda without knowing what rooting was but honestly I don't care, just please be mindfull and spend time searching thoroughly before posting.
Click to expand...
Click to collapse
I came across XDA by typing 'sidekick 4g lag fix' into google, obviously because I was experiencing lag and was hoping for a fix. One of XDA's threads was the first thing listed and people here seemed to know what they were doing and talking about here. I did spend quite a lot of time searching. I would gladly take full fault for posting something unneeded if anyone would but show me a link to a full, step by step, easy to follow guide. *shrugs* I'll eat my words if there is one.
I need help
So I'm trying to run a custom rom on my new SK4g but no matter what I do, I keep softbricking it... just gets stuck on the sidekick logo during boot. I've followed this guide STEP BY STEP a few times and with different roms, same result. After the rom install is complete I confirm the mounts are correct and then reboot to system but it never gets to system. I end up having to start over from stock via ODIN
HELP HELP HELP... what am I doing wrong. The only POSSIBLE thing I can think of is when it comes time to overwrite the recovery binary, I use adb shell and mount the system with:
Code:
# mount -o remount,rw -t ext3 /dev/block/mmcblk0p25 /system
then I copy the file with:
Code:
# cp -f /mnt/sdcard/recovery /system/bin/
Code:
# reboot recovery
please someone help me and tell me what im doing wrong
not too sure what's wrong, but if you are flashing ROMs, you probably are getting into ClockworkMod properly. are you checking your mounts BEFORE you install the ROM as well as after?
xmeatizmurderx said:
Posting several threads that say basically the same thing is annoying and clutters the threads making it hard for people to find what they need. It has also annoyed the **** out of a lot of us on here and driven away several developers for this phone because noobs come on and post new threads constantly about the same couple of things.
Being a noob is fine, we all are at some point but learning to search and pm some of the senior members for help will help keep the forums clean and the devs happy, I find it hard to believe you came across xda without knowing what rooting was but honestly I don't care, just please be mindfull and spend time searching thoroughly before posting.
Click to expand...
Click to collapse
Wow, your a real ass. I think this guide is probably the best one here. Very clean and very thorough. Its not people like him that cause developers to leave. Its people like you with no respect and a big attitude. And a HUGE head!!
Sent from my SGH-T839 using xda premium
Thanks so much for this post
Thanks for explaining in layman's terms how to do this. It is very helpful for me and I too had trouble making sense of the other how-to posts. With something as sensitive as flashing hardware it is really important for a novice to clearly understand the steps. I for one really appreciate and applaud your efforts Kediil and Yogi2010!
I'm glad that this has helped some people! I know for those that have been around here a while, it is basically the same thing we already know, but I do think this guide was very clearly written, and is helpful to those who are completely new to this and don't have any idea where to start, and just want to get their phones rooted and modded. kudos to kediil for the great write-up!
I get mad everytime i try to do this because whenever i try to reinstall the packages it just says failed to verify whole signature or whatever then it aborts it , help me please , im tired of this **** ass stock rom
JayNycWepa said:
I get mad everytime i try to do this because whenever i try to reinstall the packages it just says failed to verify whole signature or whatever then it aborts it , help me please , im tired of this **** ass stock rom
Click to expand...
Click to collapse
It sounds like the modified recovery didn't get properly moved into system/bin. Have you followed the steps and pasted the recovery file you downloaded into system/bin, replacing the recovery file that was already there?
Kediil said:
I came across XDA by typing 'sidekick 4g lag fix' into google, obviously because I was experiencing lag and was hoping for a fix. One of XDA's threads was the first thing listed and people here seemed to know what they were doing and talking about here. I did spend quite a lot of time searching. I would gladly take full fault for posting something unneeded if anyone would but show me a link to a full, step by step, easy to follow guide. *shrugs* I'll eat my words if there is one.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1206991
Like I said, SEARCH BEFORE POSTING
It took me all of 10 seconds to find this, it's on the second page of the development section and there are only 4 pages. It took you far longer to type this up than it would have to search.
The reason we don't have stickies is because moderators don't pay attention to us because we have no developers anymore (this is about to change though one of our members was recently sent an invite)
If this were any other phone this overposting wouldn't be tolerated, you guys treat the forums like it's facebook and would rather start a thread than take the time to search for your answer, and it clutters everything up with useless threads. When I joined XDA and had a G1 I didn't post anything for like 2 years because I was able to find the answers by searching.
I am an asshole, so get used to it but I mean you no harm. I am trying to give advice because I have been on here since day one and personally seen devs leave out of irritation with the members lack of forum etiquette. If we can all try and keep the forums clean then we have a better chance of getting support, and this will also help you guys in the future when you move onto more popular devices. If you think I'm a **** you have no idea what some of the senior members can be like lol
---------- Post added at 05:51 PM ---------- Previous post was at 05:22 PM ----------
dw9906 said:
Wow, your a real ass. I think this guide is probably the best one here. Very clean and very thorough. Its not people like him that cause developers to leave. Its people like you with no respect and a big attitude. And a HUGE head!!
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
That's what she said
Alright I'm done trolling now
xmeatizmurderx said:
http://forum.xda-developers.com/showthread.php?t=1206991
Eat 'em up bro
Like I said, SEARCH BEFORE POSTING
Click to expand...
Click to collapse
Um, you posted a link to a FAQ, not a step by step guide...
xmeatizmurderx said:
Alright I'm done trolling now
Click to expand...
Click to collapse
Quit trolling, noone is impressed. Unlike you, Kediil is actually adding to this forum.
vitriolix said:
Um, you posted a link to a FAQ, not a step by step guide...
Quit trolling, noone is impressed. Unlike you, Kediil is actually adding to this forum.
Click to expand...
Click to collapse
faq, guide, whatever
I have posted several links that tell you in plain terms how to root and put roms on from stock. If people find this one easier to read for some reason then good for them, I don't have the power to moderate the forums
My point has been made, I don't know why you are responding to me if you don't like what I have to say
P.S.
I have sent in a request to have this thread stickied for you guys

Categories

Resources