Hello!
I have a HTC Universal (hard reseted) and a laptop with a fresh installation of windows vista rc2 (5744).
I can't make vista install the appropriate drivers to be able to connect to HTC.
I can open WMDC but it keeps saying "not connected". When I connect my HTC to laptop, via USB, nothing happens. Seams that vista doesnt recognize my PPC. Onether thing, perhaps without importance, I tried to connect a flash disk Pen and nothing happened either! It seams that Plug and Play device discovery is not functioning on vista. Is it normal?
Can anyone help me?
Thanks a lot!
Deiota
Plug and play issue on vista?
Hi!
I'm having problems with instalation of HTC and Vista Windows Mobile Device Manager!
The device is not recognized by Vista, I mean, I connect the USB cable to laptop and nothing happens! But I can open WMDC but always says "not connected".
The wierdest thing is that I've connected 3 Pen Drives and nothing happened too!
Is this a general issue problem with Plug and Play discovering devices or is this nonsense and not related?
Please help! I'm getting desperate!
Deiota
USB Issue
If you can't access a pen-drive then you probably have a driver issue with regards to your USB ports and will be unable to access your Windows Mobile device via USB. If you have bluetooth you might want to try connecting via that. The general Beta release only has basic support for WM devices (There will either be a seperate download or it might make the gold code) if you are part of the vista beta you can download the enhanced support (duplicates ActiveSync functionality) from the connect site.
Robert Harrold
Hi All,
I'm running Windows 7
1. Suddenly my Windows Mobile Device Center Failed to recognize my phone and connect to sync. After some troubleshooting I realized the "Microsoft Windows Mobile Remote Adapter Driver" Failed to work correctly Saying "This device cannot Start (Code 10).
I uninstalled the driver in the Device Manager and attempted to Search for the Driver again after a Restart, my phone was again found while attempting to Sync but once again during Driver installation it failed and gave the Exclamation Mark stating an issue and sure enough it is the Code 10 error again.
2. This exact same issue happens when attempting to Tether to use the Phone as an Internet Modem. The Network Adapter driver to Tether is "Remote NDIS based Internet Sharing Device" and it also doesn't install fine anymore. So no Tethering for me via USB.
Now, all the above happened suddenly while using the Internet Tethering with no issues. It simply disconnected and then that was the end of that.
Let me tell you to what Extent I went to try to get this to work. I re-formated my hard drive and re-installed Windows 7. And NOPE it didn't work. Windows Mobile Device Center is properly installed and that is when all the drivers are provided, during the WMDC installation. Once WMDC was installed, my phone was found, the Activsync feature and the Internet Modem feature, and the driver installation attempt happened, The correct drivers were found, but they just weren't Installed successfully as explained above. I'm currently browsing the internet using the Bluetooth PAN Internet Sharing, which works wonderfully with no issues.
But I really need to get the above two items working again, otherwise I can no longer connect my phone via activesync or better said WMDC for Windows 7 to Flash a New ROM.
Now so that nobody thinks it's a problem with my phone, I have three other computers where I can connect via WMDC and Tether via USB with no issues. But I'm having trouble with my Dell Inspiron 9300 which gave me no issues for Months until now.
I considered myself very computer savvy but at this point I'm really stuck!
Any help?
Thanks in advance,
Raudel
try to download activesync for w7 from microsoft
i had a prb, dunno if similar, but that helped me
Moved as not ROM Development.
avatar_ro said:
try to download activesync for w7 from microsoft
i had a prb, dunno if similar, but that helped me
Click to expand...
Click to collapse
The Windows Mobile Device Center that gets Installed is the one with Windows Update. So it must be the correct one with the Win 7 Drivers.
Thank you for your reply.
Any other ideas would be really appreciated.
Thanks in advance,
Raudel
i have the same problem with win7 and HTC touch2
i cannot solve the problem with HTC touch GSM everything is OK
any Help !!!!
I'm also getting this problem. It just began after a hardware upgrade. Microsoft remote adaptor cannot start. I have tried re-installing device centre numerous times and i cannot get device center to recognise my phone.
It works fine in disk drive mode however.
Edited to add that my device is recognised fine on other machines. So it is an issue with my PC. Interestingly my wireless usb adaptor won't work either.
I had a similar problem, found a solution online. There were some issues with Intel P55 chipset, it sync up immediately after BIOS update and reboot.
Hope this makes your day, best of luck.
I have a Windows 7 computer with latest ZUNE installed and WM7 mozart
After I connect WM7 to my computer. My computer did not recognized anything.
Feel like nothing plug-in but my WM7 is charging the battery.
I tried it on my friend's XP computer with the same cable plug-in.
It will ask the XP computer to install driver.
I double clicked with my Windows 7 computer. There is not driver missing.
Do anyone here experienced this b4? if not could you please give me some hints to check my computer?
Thank you!
Problem resolved, by restart "Zune Windows Mobile Connectivity Service"
Hi,
Recently I made an installation of the Infused ROM 2.2.3 and Infusion OC kernel on my device, but I can´t make any USB connection (mass storage) to work properly on Windows XP SP3 with Samsung Modem installed, and Samsung SGH-I997 drivers too, Kies installed and etc... when device connects and show the 2 external units, and when begin to copy files between PC and phone device disconnects automatically, and sometimes freezes the entire windows explorer... what I´m doing wrong?
This is both in Windows XP SP3 and Mac OS X 10.6.8, in mac, device simply doesn´t appears... notice that Kies on mac is on version 1.0... and in Windows is on 2.+...
rikochet33 said:
Hi,
Recently I made an installation of the Infused ROM 2.2.3 and Infusion OC kernel on my device, but I can´t make any USB connection (mass storage) to work properly on Windows XP SP3 with Samsung Modem installed, and Samsung SGH-I997 drivers too, Kies installed and etc... when device connects and show the 2 external units, and when begin to copy files between PC and phone device disconnects automatically, and sometimes freezes the entire windows explorer... what I´m doing wrong?
This is both in Windows XP SP3 and Mac OS X 10.6.8, in mac, device simply doesn´t appears... notice that Kies on mac is on version 1.0... and in Windows is on 2.+...
Click to expand...
Click to collapse
Drivers are not necessary for USB mass storage mode.
Are XP and MacOS on the same dual-boot machine or are these different machines?
I know one of the ports on my Asus laptop is weird and constantly disconnects the phone - it's limited to just one port and the rest work fine. Maybe you have something similar.
Entropy512 said:
Drivers are not necessary for USB mass storage mode.
Are XP and MacOS on the same dual-boot machine or are these different machines?
I know one of the ports on my Asus laptop is weird and constantly disconnects the phone - it's limited to just one port and the rest work fine. Maybe you have something similar.
Click to expand...
Click to collapse
I have an iMac with Mac OS X 10.6.8 (x64) Bootcamp and WinXp (x86) installed, primary boot system is XP SP3, well... I´ll check usb ports, hope this helps to solve this...
in my office machine (HP Windows XP Pro x86) I have kies and drivers installed too, but this machine works so fine all the time, when I connect the phone, explorer displays the two units and it can copy/paste files between PC/phone without disconnecting, connection is stable...
... maybe I should get the Samsumg i-9000 drivers instead of SGH-i997 due to I´m on Infused 2.2.3??
What the hell is Windows XP?
Sounds like a driver conflict kies doesn't play well with win 7 64. I know from personal experience
Try uninstalling all drivers and kies then reinstall drivers only, I think xp has generic drivers for usb mass storage so if you just need that then connect it without installing driver's.
Also make sure your data cable is good. Try a new one. They are cheap on Amazon
Sent from my SAMSUNG-SGH-I897 using xda premium
shadow65781 said:
Sounds like a driver conflict kies doesn't play well with win 7 64. I know from personal experience
Try uninstalling all drivers and kies then reinstall drivers only, I think xp has generic drivers for usb mass storage so if you just need that then connect it without installing driver's.
Also make sure your data cable is good. Try a new one. They are cheap on Amazon
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Since it affects XP and MacOS on the same dual-boot machine but doesn't affect his work machine - I suspect it's a USB port problem.
Try this...
Were you able to go into mass storage mode prior to flashing the ROM?
If so, maybe your USB Ports are looking for something that to them isn't there...every time that you connect a usb device, your computer creates a record in the usbstor section of the registry. You can manually delete these by using regedit and heading to the key:
HKEY_LOCAL_MACHINESYSTEM\CurrentControlSet\Enum\USBSTOR
Remember that making changes to your registry can have some undesired results, but this one is pretty safe.
Alternatively, you can go to this site http://www.nirsoft.net/utils/usb_devices_view.html and use USBDeview to disable any old keys or such.
Don
maybe... I don´t know why but its on both systems on iMac machine, device attempts to connect and a milisecond after that, connection rejects and reconnects then reject a bout a three times like it was shortcircuit... like I was saying, in my HP (work machine) works like a charm, even in USB debugging mode, or not, so...
wvmedic said:
Were you able to go into mass storage mode prior to flashing the ROM?
If so, maybe your USB Ports are looking for something that to them isn't there...every time that you connect a usb device, your computer creates a record in the usbstor section of the registry. You can manually delete these by using regedit and heading to the key:
HKEY_LOCAL_MACHINESYSTEM\CurrentControlSet\Enum\USBSTOR
Remember that making changes to your registry can have some undesired results, but this one is pretty safe.
Alternatively, you can go to this site http://www.nirsoft.net/utils/usb_devices_view.html and use USBDeview to disable any old keys or such.
Don
Click to expand...
Click to collapse
I will try it and see what will happens... what could it be?
a driver problem?
another thing that I forget to mention is that I installed drivers manually, actually I live in a block without any wi-fi network! and my Windows XP could not get drivers via Microsoft Update, so, I don't know if this is a factor too
I just recieved my new HTC Titan.
So I tried to plug it into my windows 7 computer, where Zune is already installed.
But when I plugged it in, it got recognized as an PocketPC Usb device.
These drivers are downloaded from Windows Update.
If I disable internet it isn't recognized at all.
Zune cannot connect to the phone either.
Is there any solution for this, I couldn't find anything.
Thanks in advance