Ok Let me Rephrase.
I'm having trouble connecting to Wifi hot spots, it brings me a Message telling me to Please Verify your Network Settings.
How can I verify my network settings?
I tried everything on the Manual, yet I cannot connect to any internet.
Settings/6 Connections/8 Wlan Settings /1 Wifi
hot spots will not connect for me.
The hotspot : menu/edit has these settings:
Network type: Internet
Auth: Open
No encryption
Key is auto
It tries to connect, but gives me that Above Message that I need to verify my settings.
Can somebody Explain or if its already been explained ANYWHERE, Redirect me to that Thread and Site.
Thanks.
Ok do i take this as the people of the forum are Rudely Ignoring me ?
Thanks alot
sorry for the late reply.
can you be more specific, i mean is the trouble with wifi connecting or when you try to access internet?
sometimes wifi connects but you cannot access internet. is that the case?
prajith said:
sorry for the late reply.
can you be more specific, i mean is the trouble with wifi connecting or when you try to access internet?
sometimes wifi connects but you cannot access internet. is that the case?
Click to expand...
Click to collapse
The trouble seems to be with the Wifi Connecting.
It searches and finds hotspots.
Tries to connect and fails and returns a message saying change network settings or something.
It has never connected to wifi....
I apologize if this has already been addressed. I looked, but couldn't find anything.
Here's my problem. I have a Tilt 8925 and WMWifi Router. My internet sharing connection settings are through Media Net. I have used this connection method for many months. Well, today, I connected my laptop through the WMWifirouter and everything was fine for about 5 minutes. Then my connection was lost, and upon trying to re-establish my connection, I notice that the internet sharing connection is trying to connect through AT&T ISP or something like that. I have repeatedly tried to switch it back to Media Net, but it keeps kicking back to the ISP setting. I have no way of connecting through ISP so, what happened and how do I fix it?
Thanks in advance!
Not sure if this is related or not. I never really paid attention to these settings before, so I can't say. If I look under the wi-fi connections settings tab on my phone, it brings up Configure Network Adapters. It is set to Virtual Ethernet Intermediate Miniport.......under that there are a whole bunch of other things. If I try to change it to IEEE 802.11b/g Compatible Wi-Fi Ad......, it appears as if it accepts the changes, bbut I then go immediately back into the settings and it is back on the virtual ethernet setting. Shouldn't I be able to change it, and could this possibly be why I can no longer connect using the WMWifiRouter?
Any help at all, please???!!!!
Even just a response of I'm not sure is better than no response at all.
Hi! I just got my touch pro a few days ago and i love it! However, on both the stock rom and the latest energy rom, I can't browse the internet on wep encrypted wifi networks. open networks work fine thoguh. It says it is connected but i get a "cannot find page error" in opera. I have tried multiple hard and soft resets with no success. Any ideas? Thank you!
It's probably the network's security. Check the settings...
Have you tried connecting to other wep secured networks? Like your friends'? I can connect fine on all types.
Need a little help. My G-tab is running current VEGAn-TAB rom. I am having problems getting the wifi to actually connect. My icon shows a good signal, and inside the wireless settings I am showing connected to my wireless network. I also went to advance settings and made sure wifi never sleeps. All apps that need internet connection (market, browser, etc.) show no data connection.
Used yesterday with no problems. My laptop is running on same network and working fine.
Any ideas?
have you restarted? Sometimes happens to me too but it's nothing a simple restart can't fix.
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
TexasZac said:
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
Click to expand...
Click to collapse
Could be competition on the 2.4 GHz frequencies. Some wireless phones and even microwave ovens can trash a wifi connection.
Moved to general
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
LittleBirds said:
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
Click to expand...
Click to collapse
No problems with home WEP, office WPA2-PSK and several wide open public ones. I just wish the damn thing would auto-connect to the ones I have been to before.
outofoffice said:
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
Click to expand...
Click to collapse
My only guess is, if its a 5Ghz N Router you should check to see if it allows
2.4Ghz signals and not just 5Ghz. The GTAB doesn't seem to support connections at 5Ghz.
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
I don't have a lot to add to help you troubleshoot, but I can say that I am running VEGAn Gingerbread RC1 with pershoot's latest kernel. I am able to connect at home on a WAP2-PSK (Linksys Linux based G/N) at home, WAP2-PSK at the cabin (Linksys's cheapest G/N), and at work on a 802.1 EAP network (Cisco).
I has some unexplained issue mounting the internal storage on a computer. After a little head scratching, I started to wonder if it had something to do with the custom kernel I was running. I flashed Pershoot's latest kernel and my problems went away.
I mention all that to suggest that you might try flashing a different kernel and see if you get different results.
I have an issue with vegan where when i reboot the device (or turn off and turn on) wifi is off even if left on when turning off, i have to manually turn on wifi after every boot.
Sent from my DROIDX using XDA Premium App
fajordan said:
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
Click to expand...
Click to collapse
Have you checked to see if you're using MAC address filtering, and if so, that your gTab's MAC address has been added to the whitelist on the router? I get the feeling that that may be the issue. You have the WEP key on your device, but your router's still blocking it. I'm running the same ROM you are, and have had absolutely no troubles connecting to my work network with 802.1 PEAP, WPA/WPA2-TKIP and AES at home, and multiple makes/models of access points/routers.
Hmmm. Just reread your original. Now I'm wondering if you have enough DHCP leases available on your router. If you're out, you'll have to wait until a lease expires or add some more to your scope of addresses.
Hope some of that helped in some way...
Hi all, just received my 8T on Friday. I migrated from a Pixel 4XL which was having microphone issues I think. After migration, tried to set up the phone, and I could not get the 8T to connect to my home's WPA2-PSK wifi network to log back into my google account, get OS and app updates, add email accounts, etc. Had to do all that over 4G. Finally discovered by accident that the phone will connect to unencrypted networks like hotspots. Eventually, I run a debug trace on my home wifi infrastructure (Cisco 9130 with embedded wireless controller & other Cisco 3800's) and I can see that the phone connects just fine to "open" network that I created to test with, but as soon as I try to connect to the WPA2 network everything in the house runs on, the entries in the trace stop... meaning the phone isn't even trying to connect to the access point. On the phone, when you click to connect to the secured wifi, you can see the status go from "saved" to "connecting" back to "saved", while the access point sees no connection attempt whatsoever. So it's either software or hardware problem with the phone. Seeing as I've been on at least two different versions of the OS, I suspect hardware.
So my question is this: is anyone else able to connect an 8T to a wifi network that's secured with WPA2 preshared key? Is it just me having trouble? I've been on chat with OnePlus support two different times, now I'm waiting since Sunday for a shipping label for RMA to OnePlus.
Any help greatly appreciated!