Related
Don't know if this was already posted but I was keeping an eye on Kalozzo's Twitter account and just saw he posted DHD 2.3.1 AOSP (fully UNsupported).
All his work, I'm just posting here.
2.3.1 AOSP for HD http://bit.ly/hETZtd
Completely unsupported.
Not working: usb mass storage, camera and camcorder, do not report bug
Click to expand...
Click to collapse
As always, be careful
This is a Gingerbread ROM ?
downloaded , away to try out! Thanks!
says 2.3.1 so id assume so ... seems an early version tho .. ill wait
for posting tho
Dynosu said:
says 2.3.1 so id assume so ... seems an early version tho .. ill wait
Click to expand...
Click to collapse
Indeed, this is Gingerbread and a very first release indeed.
Lol too much traffic :s
Thread already ongoing in General regarding this rom ; suggest mods combine.
can anyone post the file in another share? link not working
just installed it and it gingerbread looks to be pre-rooted as well
but very early build doh
here a another link http://www.megaupload.com/?d=OU9EZSAD
chowdarygm said:
can anyone post the file in another share? link not working
Click to expand...
Click to collapse
http://bit.ly/evQOx0
copied it to my dropbox, enjoy (
do you install on its own or over cyanogen?
stuck on htc screen (done full wipe)
thanks.
frankieboyo said:
do you install on its own or over cyanogen?
stuck on htc screen (done full wipe)
thanks.
Click to expand...
Click to collapse
its an early version, and no support yet .. its possible that it doesnt always install right. Did you install anything over it? just do a clean install ... no kernels, no apps unless otherwise specified.
and again, its an early version ... so it might not always work.
so this is a cyanogen rom and not a completely stock version of android?
thanks ill try again.
Dynosu said:
http://bit.ly/evQOx0
copied it to my dropbox, enjoy
Click to expand...
Click to collapse
Thanks for the link
will try
Here is a Torrent Link I've created.
anybody esle is moblie network and wireless working? mine not, try entering APN but it don't save it :s
cattleprod said:
anybody esle is moblie network and wireless working? mine not, try entering APN but it don't save it :s
Click to expand...
Click to collapse
Wifi and mobile network working fine here after restart......
chowdarygm said:
Wifi and mobile network working fine here after restart......
Click to expand...
Click to collapse
cool going to reflash it
Thanks to oceanmoon for sharing.
RUU_Ace_Sense30_S_HTC_WWE_3.06.405.1_Radio_12.62.60.27_26.13.04.19_M_test_213132
http://www.filesonic.tw/file/1958043984
Mirrors are welcome!
Regards!
wa , realy ? Is it true ?
the filename is
"RUU_Ace_Sense30_S_HTC_WWE_3.06.405.1_Radio_12.62.60.27_26.13.04.19_M_test_21313"
you should keep it as is in the thread title, this is a test RUU
it is test rom ?? hmmm , not finish . Wait wait wait
its as good as done, im just saying for accuracy, the test tag should be kept in the thread title
hamdir said:
the filename is
"RUU_Ace_Sense30_S_HTC_WWE_3.06.405.1_Radio_12.62.60.27_26.13.04.19_M_test_21313"
you should keep it as is in the thread title, this is a test RUU
Click to expand...
Click to collapse
Did it! The Titel line is to short to add the full ROM Name.
Come on people,
is best for the moment what you can get, and still someone complain, is not fair, I am very happy and glad for sharing this link, I am sure will still better as 2.50 one, and if tomorrow will come official release one, and I will download release and thats it, when I was on win 6.1 on my old htc touch hd, I was flashing roms nearly every day... , not too busy, happy with stock and go launcher, just want latest stock if is there one..
---------- Post added at 03:16 PM ---------- Previous post was at 02:31 PM ----------
Not sure if is only me, but looks like is not possible install this rom, everytime come with error : this rom is not signed for this or something similar, any advice or help.., thanks..
MrT69 said:
Thanks to oceanmoon for sharing.
RUU_Ace_Sense30_S_HTC_WWE_3.06.405.1_Radio_12.62.60.27_26.13.04.19_M_test_213132
http://www.filesonic.tw/file/1958043984
Mirrors are welcome!
Regards!
Click to expand...
Click to collapse
It it rooted?
GiZmo80 said:
It it rooted?
Click to expand...
Click to collapse
Test roms always have su binary and unsecured boot.img.
But you better don't touch it if you don't know what is it.
mike1986. said:
Test roms always have su binary and unsecured boot.img.
But you better don't touch it if you don't know what is it.
Click to expand...
Click to collapse
Hi Mike,
any chance of proper RUU 3.06.405.1 in exe ???
Many thanks
mike1986. said:
Test roms always have su binary and unsecured boot.img.
But you better don't touch it if you don't know what is it.
Click to expand...
Click to collapse
Mike,
Is this a beta version of your base ROM? Has the same build number...
harpss1ngh said:
Mike,
Is this a beta version of your base ROM? Has the same build number...
Click to expand...
Click to collapse
This is the same ROM as my ROM is based on.
mike1986. said:
This is the same ROM as my ROM is based on.
Click to expand...
Click to collapse
Hmm...so someone is still leaking the ROM...should get this deleted
So is this really working rom and can I flash this on 2.3.3 without root
zombie.raised said:
So is this really working rom and can I flash this on 2.3.3 without root
Click to expand...
Click to collapse
Should be possible BUT I wouldnt recommend it. The rom isnt perfect and that's probably also the reason why HTC didnt release it yet. Wait for official OTA release or flash any rooted version of the RUU so you'll be on the safe side.
harpss1ngh said:
Hmm...so someone is still leaking the ROM...should get this deleted
Click to expand...
Click to collapse
be happy that others didn't thought like this or you wouldn't had your current rom to play with.
warning..
It seems that with the ENG HBOOT the rom can't boot (just tested it)
Maybe they did change something (the HBOOT included in the rom is version 2.0 so maybe there's something different in the boot process)
I have to investigate further.
harpss1ngh said:
Hmm...so someone is still leaking the ROM...should get this deleted
Click to expand...
Click to collapse
I still don't get why this is happening. Did HTC send a letter to all the devs saying: "Hey guys so yeah it's cool if you make roms based on this but DON'T DISTRIBUTE THE BASE"?
LinoX said:
It seems that with the ENG HBOOT the rom can't boot (just tested it)
Maybe they did change something (the HBOOT included in the rom is version 2.0 so maybe there's something different in the boot process)
I have to investigate further.
Click to expand...
Click to collapse
Sorry, that's wrong m8!
I'm using this ROM incl. the HBOOT-2.00.0025 since two weeks.
It's working.
MrT69 said:
Sorry, that's wrong m8!
I'm using this ROM incl. the HBOOT-2.00.0025 since two weeks.
It's working.
Click to expand...
Click to collapse
Hi !
The downgrade method works with it too ? Because if an official ROM flashed the S-OFF state going to be S-ON. I'm thinking to try this ROM, but I don't want to stuck with it.
Does the USB Disk Drive mode working properly ?
Thanks !
Hello, since CyanogenMod cannot be officially build and the official ones are outdated, I thought it might be helpful for someone to build and release it.
So i started syncing the repo and compiling, and right now i'm running the lastest daily build on my Ville.
This is just CyanogenMod. This is exactly how the official one would be.
Instructions
You need a custom recovery!
- Download ROM and GApps from below links
- Reboot into recovery
- Flash ROM
- Flash GApps
- To solve tearing, flash a custom kernel
If you're S-ON
- Extract boot.img from the ZIP of the kernel you're flashing
- Reboot into bootloader and select fastboot
- Connect it to the PC
- Run fastboot flash boot boot.img (where boot.img is the path of the boot.img file if it's not in the same folder)
Click to expand...
Click to collapse
Downloads
ROM - Get one from here or here
GApps - Download
CyanogenMod suffers from tearing. To fix this, you can flash a different AOSP kernel, like Bubba Kernel.
Click to expand...
Click to collapse
Hi,
thanks for the work! I also tried to build latest CM10.1 yesterday, however I failed to extract all the required blobs from my device. May I ask, which ROM you used to extract the blobs from? The latest officially build cm10.1 is lacking 3 files here....
Thanks!
Joschkopf said:
Hi,
thanks for the work! I also tried to build latest CM10.1 yesterday, however I failed to extract all the required blobs from my device. May I ask, which ROM you used to extract the blobs from? The latest officially build cm10.1 is lacking 3 files here....
Thanks!
Click to expand...
Click to collapse
Are you sure that was the problem? I used the last official one too
Cero92 said:
Are you sure that was the problem? I used the last official one too
Click to expand...
Click to collapse
When I run extract-files.sh I get:
remote object '/system/bin/hci_qcomm_init' does not exist
remote object '/system/lib/hw/gps.default.so' does not exist
remote object '/system/lib/libgps.so' does not exist
remote object '/system/lib/libloc_ext.so' does not exist
I'm not sure whether that's actually a problem or not, but to me it looks like at least GPS will not work...
My build also didn't boot, I couldn't load the adreno drivers due to missing symbols...
Did you do anything other special?
Joschkopf said:
When I run extract-files.sh I get:
remote object '/system/bin/hci_qcomm_init' does not exist
remote object '/system/lib/hw/gps.default.so' does not exist
remote object '/system/lib/libgps.so' does not exist
remote object '/system/lib/libloc_ext.so' does not exist
I'm not sure whether that's actually a problem or not, but to me it looks like at least GPS will not work...
My build also didn't boot, I couldn't load the adreno drivers due to missing symbols...
Did you do anything other special?
Click to expand...
Click to collapse
Uhm, that's strange. It's a problem for sure, but i didn't had it. If you want to try, i can upload you those files.
great work
Cero92 said:
Uhm, that's strange. It's a problem for sure, but i didn't had it. If you want to try, i can upload you those files.
Click to expand...
Click to collapse
Sure, that would help. It would also be interesting to know, whether those are required on your side at all. Maybe I pulled the wrong branch somehow...?
whats the difference with the other tread?
Joschkopf said:
Sure, that would help. It would also be interesting to know, whether those are required on your side at all. Maybe I pulled the wrong branch somehow...?
Click to expand...
Click to collapse
If you get those errors while extracting files from your phone i don't think that the branch you used matters.
Maybe it could be a driver issue or something similiar?
real187 said:
whats the difference with the other tread?
Click to expand...
Click to collapse
Just that i'll build this (almost) everyday and upload there.
The other thread (if you mean the official one) doesn't have download links now. People sometimes build it and upload it, but links are around the thread and you don't know if there's an updated version and where to look for it.
Cero92 said:
If you get those errors while extracting files from your phone i don't think that the branch you used matters.
Maybe it could be a driver issue or something similiar?
Click to expand...
Click to collapse
What do you mean by driver issue?
The files are clearly not there in the last officially built nightly, I am using cm-10.1-20130312-NIGHTLY-ville.zip.
So I guess either
- you are using another rom to extract from, or
- you pulled and build another branch of cm10.1 (which doesn't require those files for some reason) than I am trying to build.
Joschkopf said:
What do you mean by driver issue?
The files are clearly not there in the last officially built nightly, I am using cm-10.1-20130312-NIGHTLY-ville.zip.
So I guess either
- you are using another rom to extract from, or
- you pulled and build another branch of cm10.1 (which doesn't require those files for some reason) than I am trying to build.
Click to expand...
Click to collapse
I'm sure i used cm-10.1-20130312-NIGHTLY-ville
That's the newer you can get from get.cm
I didn't had GApps (i don't think that matters), and i synced everything following the official guide so if you did too, that shouldn't be the issue.
Cero92 said:
I'm sure i used cm-10.1-20130312-NIGHTLY-ville
That's the newer you can get from get.cm
I didn't had GApps (i don't think that matters), and i synced everything following the official guide so if you did too, that shouldn't be the issue.
Click to expand...
Click to collapse
Yes, I *think* I did exactly the same
Could you do me one last favor and check, whether you have the mentioned files in croot/vendor/htc/ville/proprietary ?
Thanks a lot for your efforts!
Joschkopf said:
Yes, I *think* I did exactly the same
Could you do me one last favor and check, whether you have the mentioned files in croot/vendor/htc/ville/proprietary ?
Thanks a lot for your efforts!
Click to expand...
Click to collapse
...
I don't have those files, however GPS works. How can it be? :|
Cero92 said:
Just that i'll build this (almost) everyday and upload there.
The other thread (if you mean the official one) doesn't have download links now. People sometimes build it and upload it, but links are around the thread and you don't know if there's an updated version and where to look for it.
Click to expand...
Click to collapse
i have no problems with it.
but if you coordinated with them, they could add efforts to make this tread the centralized place 4 all cm-junkies
Cero92 said:
...
I don't have those files, however GPS works. How can it be? :|
Click to expand...
Click to collapse
I guess they're also not listed in your croot/device/htc/ville/proprietary-files.txt , am I right?
Of course not
My file is called device-proprietary-files.txt , maybe we are really using different branches?
real187 said:
i have no problems with it.
but if you coordinated with them, they could add efforts to make this tread the centralized place 4 all cm-junkies
Click to expand...
Click to collapse
I think this is just a temp solution, when the license issue will be solved there will be no need to continue this
Cero92 said:
I think this is just a temp solution, when the license issue will be solved there will be no need to continue this
Click to expand...
Click to collapse
The DMCA has already been resolved. People simply don't care enough about Ville to restart the official builds.
justaway2 said:
The DMCA has already been resolved. People simply don't care enough about Ville to restart the official builds.
Click to expand...
Click to collapse
Ah :|
But as far as i know, the nigthly are build by a script, am i wrong?
Hi,
I'm trying to find a cifs module to access windows shares from the Shield with no luck so far. Does anybody know where I can find one already compiled for the latest kernel?
tincore said:
Hi,
I'm trying to find a cifs module to access windows shares from the Shield with no luck so far. Does anybody know where I can find one already compiled for the latest kernel?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2398836 <- You may want to check out the kernel thread. I wouldn't expect anyone to have it ready for a while. There are still a few bigger issues to resolve.
...I also think this thread might be a bit misleading since it's looking for and not offering the cifs.ko but whatever.
twistedumbrella said:
http://forum.xda-developers.com/showthread.php?t=2398836 <- You may want to check out the kernel thread. I wouldn't expect anyone to have it ready for a while. There are still a few bigger issues to resolve.
...I also think this thread might be a bit misleading since it's looking for and not offering the cifs.ko but whatever.
Click to expand...
Click to collapse
You are right about the title. Tried to change it but I dont know how.
tincore said:
You are right about the title. Tried to change it but I dont know how.
Click to expand...
Click to collapse
When you go to edit the first post, choose advanced editor. It lets you change it from there. I'm sure once we can get kernels building, getting a module will be swift.
twistedumbrella said:
When you go to edit the first post, choose advanced editor. It lets you change it from there. I'm sure once we can get kernels building, getting a module will be swift.
Click to expand...
Click to collapse
Do you have issues compiling them?
What's up guys? First post on this website. I've been trying to search for a previous post on how to root this tablet but they all either don't work anymore or aren't for my Android version. I have an Asus memo pad 10 ME102A with Android version 4.2.2.
Has anyone been successful in rooting this device? From what I've researched so far rooting the device is possible. If anyone has any insight into the process I would greatly appreciate it.
domheu117 said:
What's up guys? First post on this website. I've been trying to search for a previous post on how to root this tablet but they all either don't work anymore or aren't for my Android version. I have an Asus memo pad 10 ME102A with Android version 4.2.2.
Has anyone been successful in rooting this device? From what I've researched so far rooting the device is possible. If anyone has any insight into the process I would greatly appreciate it.
Click to expand...
Click to collapse
Use Kingo.
It basically does it all for you.
See my post in this thread:
http://forum.xda-developers.com/showpost.php?p=48196485&postcount=23
skeppley said:
Use Kingo.
It basically does it all for you.
See my post in this thread:
http://forum.xda-developers.com/showpost.php?p=48196485&postcount=23
Click to expand...
Click to collapse
It's funny because after some more digging I found that kingo thing. The problem now is the only working computer I have in my apartment is a mac and when I tried downloading it but it didn't work. I tried opening it through winebottler but that didn't work either lol. So I'm kinda stuck again.
You would happen to know how to use kingo on a Mac would you?
My impressions of the root me102a with vroot
del
Wandering in the forum I read that Vroot and Kingo could be malicious ( to the article: *ttp:// a n d roidfannetwork.com/2013/11/08/psa-kingo-root-and-vroot-malicious/). Do you have any news about it? Can someone confirm that they are safe?
paolo19.91 said:
Wandering in the forum I read that Vroot and Kingo could be malicious ( to the article: *ttp:// a n d roidfannetwork.com/2013/11/08/psa-kingo-root-and-vroot-malicious/). Do you have any news about it? Can someone confirm that they are safe?
Click to expand...
Click to collapse
Kingo is super easy and now safe.
They removed the IMEI reading that was going on, and the moderator unlocked the thread and the download link for it:
http://forum.xda-developers.com/showthread.php?t=2492888
Here is the most recent Kingo download:
https://dl.dropboxusercontent.com/u/27125957/android_root(1).exe
delete
rooting
here is another rooting method: youtube.com/watch?v=yFYobO6YSsg
Vroot
donjohnson2 said:
here is another rooting method: youtube.com/watch?v=yFYobO6YSsg
Click to expand...
Click to collapse
That is the Vroot method.
manocooper said:
That is the Vroot method.
Click to expand...
Click to collapse
ohh sorry, at first it looked different for me.
there is a custom rom for this model?
Anybody knows a custom rom? It would make the tablet a lot faster I suppose...
bravho said:
Anybody knows a custom rom? It would make the tablet a lot faster I suppose...
Click to expand...
Click to collapse
I gues i could build a rom for this device sometime. It wont be soon. I still have some fixes to do on my other tablet.
[email protected] said:
I gues i could build a rom for this device sometime. It wont be soon. I still have some fixes to do on my other tablet.
Click to expand...
Click to collapse
Sounds great!
Sent from my LG-D405n using XDA Free mobile app
[email protected] said:
I gues i could build a rom for this device sometime. It wont be soon. I still have some fixes to do on my other tablet.
Click to expand...
Click to collapse
Yes,
Please find some time and do that!
Regards
I´m building a rom right now. But it will still miss some framwork files and permission files. Im testing if it will pick up all the proprietary-files i have putt in the list.
TRe CooL5 said:
Yes,
Please find some time and do that!
Regards
Click to expand...
Click to collapse
[email protected] said:
I´m building a rom right now. But it will still miss some framwork files and permission files. Im testing if it will pick up all the proprietary-files i have putt in the list.
Click to expand...
Click to collapse
Hmm, I dont quite know , what are you talkingtalking about
Are you saying that we will have to test it, or that its not gonna be so perfect?
I will test it my self first. If i´m able to build a working rom than i will upload the file. I will try and build a bug free rom. Than i will try and ad tweaks and nicer stuff.
I did manage to get a rom build.
TRe CooL5 said:
Hmm, I dont quite know , what are you talkingtalking about
Are you saying that we will have to test it, or that its not gonna be so perfect?
Click to expand...
Click to collapse
[email protected] said:
I will test it my self first. If i´m able to build a working rom than i will upload the file. I will try and build a bug free rom. Than i will try and ad tweaks and nicer stuff.
I did manage to get a rom build.
Click to expand...
Click to collapse
May I ask in wich version of Android are you doing rom?
TRe CooL5 said:
May I ask in wich version of Android are you doing rom?
Click to expand...
Click to collapse
Im doing a cm9 rom for now. cm9 is old i know but when its ready the newer cm version will be there soon to.
I first started making roms for my telechip ICS tablet. Sow cm9 is te source i have on my laptop.
This Asus tablet hase JB on it sow i gues i will make CM10 when i finisch building a working cm9. I will alsow make cm11.
And than cm12. But cm12 will need a differant java version installed i think. I will use a program like vmware to build cm 10,11 and 12 i think.
This i will do on my pc upstairs.