Hello, since CyanogenMod cannot be officially build and the official ones are outdated, I thought it might be helpful for someone to build and release it.
So i started syncing the repo and compiling, and right now i'm running the lastest daily build on my Ville.
This is just CyanogenMod. This is exactly how the official one would be.
Instructions
You need a custom recovery!
- Download ROM and GApps from below links
- Reboot into recovery
- Flash ROM
- Flash GApps
- To solve tearing, flash a custom kernel
If you're S-ON
- Extract boot.img from the ZIP of the kernel you're flashing
- Reboot into bootloader and select fastboot
- Connect it to the PC
- Run fastboot flash boot boot.img (where boot.img is the path of the boot.img file if it's not in the same folder)
Click to expand...
Click to collapse
Downloads
ROM - Get one from here or here
GApps - Download
CyanogenMod suffers from tearing. To fix this, you can flash a different AOSP kernel, like Bubba Kernel.
Click to expand...
Click to collapse
Hi,
thanks for the work! I also tried to build latest CM10.1 yesterday, however I failed to extract all the required blobs from my device. May I ask, which ROM you used to extract the blobs from? The latest officially build cm10.1 is lacking 3 files here....
Thanks!
Joschkopf said:
Hi,
thanks for the work! I also tried to build latest CM10.1 yesterday, however I failed to extract all the required blobs from my device. May I ask, which ROM you used to extract the blobs from? The latest officially build cm10.1 is lacking 3 files here....
Thanks!
Click to expand...
Click to collapse
Are you sure that was the problem? I used the last official one too
Cero92 said:
Are you sure that was the problem? I used the last official one too
Click to expand...
Click to collapse
When I run extract-files.sh I get:
remote object '/system/bin/hci_qcomm_init' does not exist
remote object '/system/lib/hw/gps.default.so' does not exist
remote object '/system/lib/libgps.so' does not exist
remote object '/system/lib/libloc_ext.so' does not exist
I'm not sure whether that's actually a problem or not, but to me it looks like at least GPS will not work...
My build also didn't boot, I couldn't load the adreno drivers due to missing symbols...
Did you do anything other special?
Joschkopf said:
When I run extract-files.sh I get:
remote object '/system/bin/hci_qcomm_init' does not exist
remote object '/system/lib/hw/gps.default.so' does not exist
remote object '/system/lib/libgps.so' does not exist
remote object '/system/lib/libloc_ext.so' does not exist
I'm not sure whether that's actually a problem or not, but to me it looks like at least GPS will not work...
My build also didn't boot, I couldn't load the adreno drivers due to missing symbols...
Did you do anything other special?
Click to expand...
Click to collapse
Uhm, that's strange. It's a problem for sure, but i didn't had it. If you want to try, i can upload you those files.
great work
Cero92 said:
Uhm, that's strange. It's a problem for sure, but i didn't had it. If you want to try, i can upload you those files.
Click to expand...
Click to collapse
Sure, that would help. It would also be interesting to know, whether those are required on your side at all. Maybe I pulled the wrong branch somehow...?
whats the difference with the other tread?
Joschkopf said:
Sure, that would help. It would also be interesting to know, whether those are required on your side at all. Maybe I pulled the wrong branch somehow...?
Click to expand...
Click to collapse
If you get those errors while extracting files from your phone i don't think that the branch you used matters.
Maybe it could be a driver issue or something similiar?
real187 said:
whats the difference with the other tread?
Click to expand...
Click to collapse
Just that i'll build this (almost) everyday and upload there.
The other thread (if you mean the official one) doesn't have download links now. People sometimes build it and upload it, but links are around the thread and you don't know if there's an updated version and where to look for it.
Cero92 said:
If you get those errors while extracting files from your phone i don't think that the branch you used matters.
Maybe it could be a driver issue or something similiar?
Click to expand...
Click to collapse
What do you mean by driver issue?
The files are clearly not there in the last officially built nightly, I am using cm-10.1-20130312-NIGHTLY-ville.zip.
So I guess either
- you are using another rom to extract from, or
- you pulled and build another branch of cm10.1 (which doesn't require those files for some reason) than I am trying to build.
Joschkopf said:
What do you mean by driver issue?
The files are clearly not there in the last officially built nightly, I am using cm-10.1-20130312-NIGHTLY-ville.zip.
So I guess either
- you are using another rom to extract from, or
- you pulled and build another branch of cm10.1 (which doesn't require those files for some reason) than I am trying to build.
Click to expand...
Click to collapse
I'm sure i used cm-10.1-20130312-NIGHTLY-ville
That's the newer you can get from get.cm
I didn't had GApps (i don't think that matters), and i synced everything following the official guide so if you did too, that shouldn't be the issue.
Cero92 said:
I'm sure i used cm-10.1-20130312-NIGHTLY-ville
That's the newer you can get from get.cm
I didn't had GApps (i don't think that matters), and i synced everything following the official guide so if you did too, that shouldn't be the issue.
Click to expand...
Click to collapse
Yes, I *think* I did exactly the same
Could you do me one last favor and check, whether you have the mentioned files in croot/vendor/htc/ville/proprietary ?
Thanks a lot for your efforts!
Joschkopf said:
Yes, I *think* I did exactly the same
Could you do me one last favor and check, whether you have the mentioned files in croot/vendor/htc/ville/proprietary ?
Thanks a lot for your efforts!
Click to expand...
Click to collapse
...
I don't have those files, however GPS works. How can it be? :|
Cero92 said:
Just that i'll build this (almost) everyday and upload there.
The other thread (if you mean the official one) doesn't have download links now. People sometimes build it and upload it, but links are around the thread and you don't know if there's an updated version and where to look for it.
Click to expand...
Click to collapse
i have no problems with it.
but if you coordinated with them, they could add efforts to make this tread the centralized place 4 all cm-junkies
Cero92 said:
...
I don't have those files, however GPS works. How can it be? :|
Click to expand...
Click to collapse
I guess they're also not listed in your croot/device/htc/ville/proprietary-files.txt , am I right?
Of course not
My file is called device-proprietary-files.txt , maybe we are really using different branches?
real187 said:
i have no problems with it.
but if you coordinated with them, they could add efforts to make this tread the centralized place 4 all cm-junkies
Click to expand...
Click to collapse
I think this is just a temp solution, when the license issue will be solved there will be no need to continue this
Cero92 said:
I think this is just a temp solution, when the license issue will be solved there will be no need to continue this
Click to expand...
Click to collapse
The DMCA has already been resolved. People simply don't care enough about Ville to restart the official builds.
justaway2 said:
The DMCA has already been resolved. People simply don't care enough about Ville to restart the official builds.
Click to expand...
Click to collapse
Ah :|
But as far as i know, the nigthly are build by a script, am i wrong?
Related
For those interested:
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-roth-ota-1
You'll also find a lot of other useful repos in there related to SHIELD (aka roth)
rel = Release (as opposed to dev)
roth = Jumble of the word THOR
mp = Original shipping image on the device
ota-1 = Day 0 OTA
agrabren said:
For those interested:
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-roth-ota-1
You'll also find a lot of other useful repos in there related to SHIELD (aka roth)
rel = Release (as opposed to dev)
roth = Jumble of the word THOR
mp = Original shipping image on the device
ota-1 = Day 0 OTA
Click to expand...
Click to collapse
im pretty sure that at the rate things are going we will see something good coming out in the next few weeks...:good:
any update on android 4.3 build for shield? =)
1wayjonny said:
any update on android 4.3 build for shield? =)
Click to expand...
Click to collapse
Did you just say 4.3?
1wayjonny said:
any update on android 4.3 build for shield? =)
Click to expand...
Click to collapse
I'm not able to talk about that. That would be internal schedule details.
agrabren said:
I'm not able to talk about that. That would be internal schedule details.
Click to expand...
Click to collapse
Ah NP I completely understand!
wwjoshdew said:
Did you just say 4.3?
Click to expand...
Click to collapse
He did, as did google. The 2nd gen nexus 7 is shipping with 4.3 and several high end devices are getting 4.3 updates too. Kinda logical that the shield would get it eventually.
One review I read said the target was 4-6 weeks after the google update. Is that still the goal or could it be faster?
agrabren said:
For those interested:
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-roth-ota-1
You'll also find a lot of other useful repos in there related to SHIELD (aka roth)
rel = Release (as opposed to dev)
roth = Jumble of the word THOR
mp = Original shipping image on the device
ota-1 = Day 0 OTA
Click to expand...
Click to collapse
How do you git clone from there? I want to see those repos.
edit nvm found this if anyone wants to help get a rom working chat with me on gmail [email protected]
https://github.com/linux-shield/kernel/commits/roth
Unjustified Dev said:
How do you git clone from there? I want to see those repos.
edit nvm found this if anyone wants to help get a rom working chat with me on gmail [email protected]
https://github.com/linux-shield/kernel/commits/roth
Click to expand...
Click to collapse
Just follow the directions here: https://developer.nvidia.com/develop4shield#OSR
agrabren said:
Just follow the directions here: https://developer.nvidia.com/develop4shield#OSR
Click to expand...
Click to collapse
thanks synced the source its pretty weird but thanks
Could you please run the extract blob script and upload them so I can take a look ?
Unjustified Dev said:
thanks synced the source its pretty weird but thanks
Could you please run the extract blob script and upload them so I can take a look ?
Click to expand...
Click to collapse
You can run the extract blob script. It contains a license which I haven't bothered to read. I'm hoping to have a github up this weekend with all the required blobs.
agrabren said:
You can run the extract blob script. It contains a license which I haven't bothered to read. I'm hoping to have a github up this weekend with all the required blobs.
Click to expand...
Click to collapse
I don't have it yet , yes it does have license but it's open source https://github.com/Project-Sheild/android_device_nvidia_roth
I will upload the rest
I didnt respond on the other thread I got tired of going back and forth lol
One more question ( I have the blobs) what is vendor/nvidia/build for its making cm-10.1 fail?
just wanted to ask, before cloning the whole repo, what wlan driver does the shield use or where to get the defconfig for the shield kernel (couldnt find it in the kernel directory on git provided here)
thanks
crnkoj said:
just wanted to ask, before cloning the whole repo, what wlan driver does the shield use or where to get the defconfig for the shield kernel (couldnt find it in the kernel directory on git provided here)
thanks
Click to expand...
Click to collapse
No idea on wifi, but the config is available on the device in /proc/config.gz
agrabren said:
No idea on wifi, but the config is available on the device in /proc/config.gz
Click to expand...
Click to collapse
Don't have the device yet, was just wondering about the wifi driver used. Could you perhaps fetch the config.gz for me please? Thanks for the info.
Wifi driver is bcmdhd (drivers/net/wireless/bcmdhd) on Android kernel.
Gnurou said:
Wifi driver is bcmdhd (drivers/net/wireless/bcmdhd) on Android kernel.
Click to expand...
Click to collapse
so its a broadcomm chipset?
Thank u
I did find this: http://forum.xda-developers.com/showthread.php?t=2936721
however when I looked in the makefile, I found absolutely no flag, but still it builds in block form whenever I try to build something, and ends up failing to flash with a "can't execute updater binary/script" or whatever error. Any idea how to force it to build in a legacy manner, or is it just something that would require practically porting stuff to source code of kitkat to get that to work? I'm building from cm12 source from the cyanogenmod repos, with proprietary blobs pulled from the phone running a different cm build/some other repo at times, same thing both ways.
dreamwave said:
I did find this: http://forum.xda-developers.com/showthread.php?t=2936721
however when I looked in the makefile, I found absolutely no flag, but still it builds in block form whenever I try to build something, and ends up failing to flash with a "can't execute updater binary/script" or whatever error. Any idea how to force it to build in a legacy manner, or is it just something that would require practically porting stuff to source code of kitkat to get that to work? I'm building from cm12 source from the cyanogenmod repos, with proprietary blobs pulled from the phone running a different cm build/some other repo at times, same thing both ways.
Click to expand...
Click to collapse
Questions belong in Q&A, not the dev section.
You will have the option to build a block or file-based ROM zip when CM is ready.
upndwn4par said:
Questions belong in Q&A, not the dev section.
You will have the option to build a block or file-based ROM zip when CM is ready.
Click to expand...
Click to collapse
Sorry I posted in the wrong section
But I tried building from aosp source and got the same result
dreamwave said:
Sorry I posted in the wrong section
But I tried building from aosp source and got the same result
Click to expand...
Click to collapse
Search in the build folder for the ota_from_target_files then look for this line "OPTIONS.block_based" then set it to True.
Gnome said:
Search in the build folder for the ota_from_target_files then look for this line "OPTIONS.block_based" then set it to True.
Click to expand...
Click to collapse
Thanks you, I'm building now and will report back if it works. I was looking for literally hours for some way to modify something to make it work, can't believe I missed that.
upndwn4par said:
Questions belong in Q&A, not the dev section.
You will have the option to build a block or file-based ROM zip when CM is ready.
Click to expand...
Click to collapse
Might be better going in the dev discussion forum.
dreamwave said:
Thanks you, I'm building now and will report back if it works. I was looking for literally hours for some way to modify something to make it work, can't believe I missed that.
Click to expand...
Click to collapse
Set it to False sorry
dreamwave said:
Thanks you, I'm building now and will report back if it works. I was looking for literally hours for some way to modify something to make it work, can't believe I missed that.
Click to expand...
Click to collapse
I recently went back to a block based ROM zip because it flashes so damn fast. File based ROM will be slow...
Gnome said:
Set it to False sorry
Click to expand...
Click to collapse
it was false, already
Wakamatsu said:
Might be better going in the dev discussion forum.
Click to expand...
Click to collapse
That forum is for higher level discussions. This is just a question. But, the mods will decide.
OK, so I went into that file, changed the default flag inside to true and the lower part that defines what happens with an if/if not kind of thing, and (low and behold) it compiled with a legacy style. I now have a different problem, though the same as I had before. When I try to install it with the latest multirom (I'm backing up to try and flash as a main rom) it fails, saying that there was an error executing updater binary in zip "/tmp/mr_update.zip" and it doesn't install at all. Any ideas what may be the problem now?
Gnome said:
Set it to False sorry
Click to expand...
Click to collapse
I flashed it as a normal rom, and it flashed fine. Now I have a problem that it just doesn't boot. I power on the device and it shows the google logo for a while, then just reboots. Bootloop. I didn't get any errors compiling, it worked fine and flashed fine as a normal rom, but doesn't boot.
upndwn4par said:
That forum is for higher level discussions. This is just a question. But, the mods will decide.
Click to expand...
Click to collapse
You're right. Dev section is for ongoing project discussions and actual development. Any question, be that app, development, accessory etc all belong on q&a.
The rule, if its a question, q&a
Discuss here about my Optimized CM12 Builds.
Use ROM's thread ( http://forum.xda-developers.com/gal...rcm-optimized-cyanogenmod-12-samsung-t2975286 ) only for Bug Report.
Thank you.
This rom has same bugs pike in frapetti's rom? Or some additional, some fixed. Would be great have information about difference
Shiftok said:
This rom has same bugs pike in frapetti's rom? Or some additional, some fixed. Would be great have information about difference
Click to expand...
Click to collapse
"Known Bugs" can be found on GearCM 12 Thread.
Sound doesn't work sometimes as in the ringer doesn't work as well? Or just the media?
The known issue
Hi i've notice the known problem issue is the same for CM11. Is this right?
rohanchrome said:
Sound doesn't work sometimes as in the ringer doesn't work as well? Or just the media?
Click to expand...
Click to collapse
Like on CM11
febreze2xxx said:
Hi i've notice the known problem issue is the same for CM11. Is this right?
Click to expand...
Click to collapse
Exactly.
Build finally uploaded.
Enjoy
Alberto96 said:
Discuss here about my Optimized CM12 Builds.
Use ROM's thread ( http://forum.xda-developers.com/gal...rcm-optimized-cyanogenmod-12-samsung-t2975286 ) only for Bug Report.
Thank you.
Click to expand...
Click to collapse
whats the difference between this Rom and Team Canjica
When i flashed the last preview (20141512) i had no mobile data and i cant even install an app because it says app not installed whyyyyy
Error recovery (status 1) how to fix?
cmzizi said:
whats the difference between this Rom and Team Canjica
Click to expand...
Click to collapse
Almost all is different.
Sichinglin said:
When i flashed the last preview (20141512) i had no mobile data and i cant even install an app because it says app not installed whyyyyy
Click to expand...
Click to collapse
Whyyyy do you write this stupid posts? There's another build out here.
Damon3333 said:
Error recovery (status 1) how to fix?
Click to expand...
Click to collapse
Check PM
I'm sorry but this is a Q&A thread, i ask because i want an answer to my problems, and again im sorry for my "stupid" post, next time try to be more comprensive
Alberto96 said:
Whyyyy do you write this stupid posts? There's another build out here.
Click to expand...
Click to collapse
i have this problem too...
but i've installed the latest build that i downloaded today.
the problem is i can not install apps from play store nor local apk's on the phone.
i tried to delete my google acount and set it again.
i also tried to clear the play store data and google services data and nothing helped.
what can i do to solve that?
Sichinglin said:
I'm sorry but this is a Q&A thread, i ask because i want an answer to my problems, and again im sorry for my "stupid" post, next time try to be more comprensive
Click to expand...
Click to collapse
You can't write a post with "Whyyyy". This makes you "rude".
Whiplash83 said:
i have this problem too...
but i've installed the latest build that i downloaded today.
the problem is i can not install apps from play store nor local apk's on the phone.
i tried to delete my google acount and set it again.
i also tried to clear the play store data and google services data and nothing helped.
what can i do to solve that?
Click to expand...
Click to collapse
Ok, I'll check that bug ASAP. This is still a beta you can't expect a perfect build
Alberto96 said:
Ok, I'll check that bug ASAP. This is still a beta you can't expect a perfect build
Click to expand...
Click to collapse
you are absolutely right
you are doing a great job.
thank you... :good:
updates
How often you are going to update GearCM? What happens with the updates CM is offering if we already have your version.?
gapps not installing
Every thing worked great but am unable to install gapps, I get failure status 6, I can't install any apk.
I have cwm, tried flashing the minimal and full gapps linked in the main thread .both failed .
Am back to cm 11 sadly .
can someone tell me once and for all the CORRECT RECOVERY that can flash this rom without any error 7???
my S4 is GT-I9500 running Stock 4.4.2
I've tested bunch of Recoveries from Philz, to CWM To TWRP, none work, would app appreciate anyone giving me the right Recovery that can flash this rom.
Kurotsuchi said:
can someone tell me once and for all the CORRECT RECOVERY that can flash this rom without any error 7???
my S4 is GT-I9500 running Stock 4.4.2
I've tested bunch of Recoveries from Philz, to CWM To TWRP, none work, would app appreciate anyone giving me the right Recovery that can flash this rom.
Click to expand...
Click to collapse
Used TRWP 2.8.1.0 with full full wipes except internal SD and external SD with no issues
I appreciate the link. I couldn't find it on official TWRP Site. they does not seem to officially support GT-I9500.
thanks for replying.
edit: GT-I9500 was on the list. but no DIRECT downloads
Are there any custom roms or stock stripped roms out>??? PLOX post links!!!!!!!!!!
I've been wondering the same thing since June. Seems like all the ROMs are geared towards the F/H/M. I've have tried installing ROMs for other variants with messi2050's kernel. The only one I got to boot was the Note 7 ROM by Allosh. But WiFi did not work.
Hmmm... Any other issues? What about that ROM allowed for you to boot and function I wonder?
If we can get a bounty going for WiFi fix on that ROM we could possibly be on to something....!!!!!!!!!!!!!!!!!!!!!!!
carpenterethan said:
Hmmm... Any other issues? What about that ROM allowed for you to boot and function I wonder?
If we can get a bounty going for WiFi fix on that ROM we could possibly be on to something....!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Just copy the wifi files in /system/etc from a stock firmware with a root file manager to the same folder and give it the correct permissions in the N7 rom. The real problem is getting the Camara to work.
I just want a rom with an AOSP based system UI.
phoen1x74 said:
I just want a rom with an AOSP based system UI.
Click to expand...
Click to collapse
My best advice for you is to deodex your factory ROM and decompile your system framework apk(s). All of the ports you see are derived the same way. This device will never see CM/RR/Lineage ported over.
Is there any custom ROM for j700t?
Metabolic12 said:
My best advice for you is to deodex your factory ROM and decompile your system framework apk(s). All of the ports you see are derived the same way. This device will never see CM/RR/Lineage ported over.
Click to expand...
Click to collapse
Why do you think this phone will never see CM/RR/Lineage? I think its possible, but we would need is a good dedicated dev that can figure out how to port or build them.
vekenti said:
Why do you think this phone will never see CM/RR/Lineage? I think its possible, but we would need is a good dedicated dev that can figure out how to port or build them.
Click to expand...
Click to collapse
Actually it will be easy to port lineage for j700t, it only has different drivers and ram size than j700h
messi2050 said:
Actually it will be easy to port lineage for j700t, it only has different drivers and ram size than j700h
Click to expand...
Click to collapse
If you make one, I'd love to try it out. Despite the conflict that this community has had between you, you are our only dev and you are a good one.
I agree. I would LOVE to try out a good lineage port. This phone really needs a good ROM, because Touchwiz really sucks.
messi2050 said:
Actually it will be easy to port lineage for j700t, it only has different drivers and ram size than j700h
Click to expand...
Click to collapse
Heck Messi is easily the best dev we have. If you could spare some time I'd be willing to give it a shot.
phoen1x74 said:
If you make one, I'd love to try it out. Despite the conflict that this community has had between you, you are our only dev and you are a good one.
Click to expand...
Click to collapse
vekenti said:
I agree. I would LOVE to try out a good lineage port. This phone really needs a good ROM, because Touchwiz really sucks.
Click to expand...
Click to collapse
Metabolic12 said:
Heck Messi is easily the best dev we have. If you could spare some time I'd be willing to give it a shot.
Click to expand...
Click to collapse
thank u but unfortunately that won't be possible as i don't have the phone...
messi2050 said:
thank u but unfortunately that won't be possible as i don't have the phone...
Click to expand...
Click to collapse
I can go to git and setup the build environment, I've been following your work and aapav rather closely. I would just need your brain to help me change the ram and cache values and whatever else needs adjusted. Then once finished I could send you the files for upload.
Metabolic12 said:
I can go to git and setup the build environment, I've been following your work and aapav rather closely. I would just need your brain to help me change the ram and cache values and whatever else needs adjusted. Then once finished I could send you the files for upload.
Click to expand...
Click to collapse
Sweet i would like to help, Do you know how to cherry pick commits ?
messi2050 said:
Sweet i would like to help, Do you know how to cherry pick commits ?
Click to expand...
Click to collapse
Request new pull from another repo then another pull into said repo if I'm not mistaken?
Metabolic12 said:
Request new pull from another repo then another pull into said repo if I'm not mistaken?
Click to expand...
Click to collapse
No i meant to cherry pick other developers commits and apply it to your repo ( cherry pick ) if you don't know how to do that i can't help since the most difficult part will be to patch the kernel...
messi2050 said:
No i meant to cherry pick other developers commits and apply it to your repo ( cherry pick ) if you don't know how to do that i can't help since the most difficult part will be to patch the kernel...
Click to expand...
Click to collapse
I think I know what you're explaining. Can you give me a night to refresh my memory on kernel sourcing and setting up the environment? If it's too much for me I won't waste time, I'll just tell you it's out of my league.
Metabolic12 said:
I think I know what you're explaining. Can you give me a night to refresh my memory on kernel sourcing and setting up the environment? If it's too much for me I won't waste time, I'll just tell you it's out of my league.
Click to expand...
Click to collapse
You should check this thread first
https://forum.xda-developers.com/showthread.php?t=1877040
you can start a bounty thread too, i'm sure this way many developers not only me will be interested on doing it
Hello people!
After AOSP the OmniROM is now the second custom rom available on the XZ2, XZ2C and XZ3. (Needed to omnify the device files to build TWRP with it.)
Due of lack of my free time (plus I am providing AOSP and TWRP and don't have enough free space on my online storage), we need someone providing us builds for the XZ2, XZ2C and XZ3.
Of course it need to be a DualSim and a SingleSim build.
At the moment the omni device trees only offer a SingleSim variant, but it does only take 3-4 lines of code to offer a DualSim build option after lunching the device tree's.
You only need to adapt the code of the AOSP project.
PS:
They won't accept code changes at https://gerrit.omnirom.org, because they never actively support them.
Yes. I don't like this opinion, too.
PS0:
I can confirm from too people running OmniROM 9.0 on their XZ2C and XZ3 that it works.
At this moment I am running OmniROM 9.0 on my device as a test if it works.
PS1:
I can confirm, that you can directly integrate TWRP into the OmniROM (and maybe AOSP, I will test it on the next successful build).
Just build the entire ROM with "-userdebug", but the bootimage with "-eng".
Of course you need to replace the standard recovery with TWRP, while building.
This is a good place for an example how to modify the manifest files:
https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-9.0
Of course you should put your changes into the "local_manifest" folder and modify the omni manifest files.
Of course you can build an twrp installer, if you don't want to run an "-eng" bootimage.
But I can't execute "fastboot boot twrp.img" on my XZ2.
You you may need todo the same stuff like we are doing with out stock rom, to install TWRP. (TWRP thread).
Pictures :laugh:
A screenshot I forgott.
does camera work on this rom?
Faruk.ErdaL said:
does camera work on this rom?
Click to expand...
Click to collapse
Yes, as you can see in the screenshots.
The same like in Sony AOSP (the base for every custom ROM for our device).
Of course the implementation still needs Bugfixes and feature enhancements.
You can see the open tasks in the bugtracker linked in the AOSP topic in XDA.
If it's only the builds you need I can help but I probably won't be much help adapting the code.
LaputaCake said:
If it's only the builds you need I can help but I probably won't be much help adapting the code.
Click to expand...
Click to collapse
Yes
Same here.
But you would of course need to help answering questions and redirect the people to the bug tracker.
Thank you.
Without your message I would build it myself this or next month :silly:
MartinX3 said:
Yes
Same here.
But you would of course need to help answering questions and redirect the people to the bug tracker.
Thank you.
Without your message I would build it myself this or next month :silly:
Click to expand...
Click to collapse
I can help people to the best i can though it'll probably consist of them dirty flashing and everything being broken. Yeah i've got a server lying around I can throw mint on.
LaputaCake said:
I can help people to the best i can though it'll probably consist of them dirty flashing and everything being broken. Yeah i've got a server lying around I can throw mint on.
Click to expand...
Click to collapse
Nice.
I use Linux Mint, too.
I can assist you :silly:
@MartinX3 Maybe we can build the ROMs on AWS EC2 instance or similar service, then push them to S3 or similar service and have a nice effortless build env and maybe achieve some automation. It's pricy, tho...
nasko_spasko said:
@MartinX3 Maybe we can build the ROMs on AWS EC2 instance or similar service, then push them to S3 or similar service and have a nice effortless build env and maybe achieve some automation. It's pricy, tho...
Click to expand...
Click to collapse
Yes
But after the Omni support become "official" it will be build in the omnirom servers
can you provide the rom for me to test ?my computer is broken....... my aosp code will be all lost........:crying:
yangchenglei said:
can you provide the rom for me to test ?my computer is broken....... my aosp code will be all lost........:crying:
Click to expand...
Click to collapse
AOSP is already available in the AOSP thread.
MartinX3 said:
AOSP is already available in the AOSP thread.
Click to expand...
Click to collapse
what about omni？I know your good work ，yesterday when you upload it I had flashed it.good job my friend ！
yangchenglei said:
what about omni？I know your good work ，yesterday when you upload it I had flashed it.good job my friend ！
Click to expand...
Click to collapse
At the moment no time. After exams 10. February I have more time
MartinX3 said:
At the moment no time. After exams 10. February I have more time
Click to expand...
Click to collapse
Thank you Wish you have a good result
yangchenglei said:
Thank you Wish you have a good result
Click to expand...
Click to collapse
Thank you
I Volunter!!!
Sent from my Sony H9436 using XDA Labs
MurroFX said:
I Volunter!!!
Click to expand...
Click to collapse
Thx, but already tried since 1 February
MartinX3 said:
Thx, but already tried since 1 February
Click to expand...
Click to collapse
Hi
Don't you need hesters on every build to fix bugs? ?
And why is it not available to have a SDCard in XZ3 AKATSUKI when you put in double/2 Sim-Cards.? ? ?