Database Info

Problem Upgrading ROM in Qtek S110

I followed the instructions to upgrade to a Portuguese ROM
As discribed in
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
http://rapidshare.com/files/18878817/POR_11205_122_11210_ship.exe
At first place I got an error 120 country error
Then I tried MaUpgradeUt_noID.exe like i read in this forum.
I read that I could use an option in RUU.conf called [CHECKCEID_TYPE]=1
But with or without this option I get the Error 150 Rom Upgrade Utility Error saying this is not the apropriate rom upgrade version (with MaUpgradeUt_noID.exe).
When i use ROMUpgradeUt.exe I get the error 101. Connection error.
Right now my PDA is saying that is connected by usb, with 1.02 below without any blacklight.
I unchecked the USB connections but in my case is in windows mobile device center because i use windows vista business.
Please help me because i realy need this pda working.
Thanks a lot your time

same problem
i have the same problem with my s110
its still in usb or serial mode witout backlite
i dont now what to do so ist becomes still allive if you get any help let me nowh

hi there
i have a qtek s110 too and i'm pondering the upgrade to the port rom version.
i have been doing some research i think that the rom upgrade can only be done through windows xp.
have you both done it on vista?
that might be the problem...
i don't want to take any risks on doing it, so i'm still investigating...

well i updated or chaged the language on my magician last week also to portugees rom for a girlfrend with portugees background i know and she does not know english that good
from the opperating system i got the same errors as you guys discribe but when i did put it into bootloader mode ran the MaUpgradeUt_noID.exe en the upgrade whent smooth just try to run the upgrade again your device is already in bootloader mode as far as i understand i did the upgrade in XP not sure the same trick will work in Vista

WANT TO INSTALL WM6.5 OR 6.1 ON IMATE KJAM...need help

i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.

akashbaj001 said:
i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.
Click to expand...
Click to collapse
you can get WM6.5 on http://www.mediafire.com/?3tmtt4izann

im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.

rshabou said:
im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.
Click to expand...
Click to collapse
Hello, this is what you are looking for, ww.windowsceportal.hu/download/apps/htc_wizupgradeut.zip extract it and in the same folder put your rom file.
Goodluck.

I tried on my cell but it gives incorect update utilty...

I tried on my cel...but it's still givng windows Mobile 5

hassaan_july said:
I tried on my cell but it gives incorect update utilty...
Click to expand...
Click to collapse
Are you sure you are on the right device page, Each device has it's own compatible upgrade utility, so if you dont have a wizard it will not work.

Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4

hassaan_july said:
Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4
Click to expand...
Click to collapse
You should read this guide, it has all the required info.
http://forum.xda-developers.com/showthread.php?t=298613

error with code 266 or 260
Hi, every body! I'm using cingular 8125 current OS WM 6.1 (Touch Flo V. 1.0). I want to update to OS WM 6.5. But error with code 266 or 260. I check all about connection. the status is USB active sync connected. Itried to update without SD or SIM card too but still error with code 266 or 260. How can I do? Can you tell me the link that OS WM 6.5 supported with cingular 8125?

[Q] Software version does not update

Hi,
I've got two TREO750 devices. Following the same procedure I've updated both to WM6.5: from 5 to 6.1 to 6.5. The OS and FW versions are the same. Weird enough the software version of the devices are different: one uses TREO750-2.27 while the other is still on TREO750-1.15.
A closer look shows that the full 6.1 image flashes all parts of the software successfully (according to the update screen). So it *seems* to work but is not.
Any clues about how to fix this? Thanks for your help!

jeroengsm said:
Hi,
I've got two TREO750 devices. Following the same procedure I've updated both to WM6.5: from 5 to 6.1 to 6.5. The OS and FW versions are the same. Weird enough the software version of the devices are different: one uses TREO750-2.27 while the other is still on TREO750-1.15.
A closer look shows that the full 6.1 image flashes all parts of the software successfully (according to the update screen). So it *seems* to work but is not.
Any clues about how to fix this? Thanks for your help!
Click to expand...
Click to collapse
did you update the HSPL on the device before updating the rom ??
after you update with the Hard spl then you can flash with any ROM, This thread hspl ~ http://forum.xda-developers.com/showthread.php?t=334100

Hakim Rahman said:
did you update the HSPL on the device before updating the rom ??
after you update with the Hard spl then you can flash with any ROM, This thread hspl ~ http://forum.xda-developers.com/showthread.php?t=334100
Click to expand...
Click to collapse
The original poster would not have been able to flash custom ROMs without flashing the HSPL
The problem is the method of flashing, either through USB or MiniSD. Flashing through USB using Palm's Desktop Updater program is the only way for the software version to update itself. When flashing through MiniSD the Software Version cannot update due to the lack of Palm's payload file.

[Q] error 80180048 when updating omnia 7

hi,
I have a problem when updating my omnia 7 with zune from 7.10.7720.68 to the latest 7.10.7740.16. ive searched the Q&A and didnt find any results. ive checked my usb drivers to be up to date. ive also tryed with microsofts windows phone support tool and it didnt work. i belive i have a standard rom, its a 2nd hand phone
OS version 7.10.7720.68
Firmware revision nr 3.15.0.4
Radio software 2424.11.7.2
Radio hardware 0.0.0.800
Bootloader 5.8.0.8
chipsoc 0.36.2
Any ideeas?

I used to have this problem. I narrowed it down to some kind of timeout happening on the phone. I suspect it might have had something to do with the time it takes to download the actual update (I have a slow internet connection).
Try using the following method to push the updates and see if you notice any improvement:
http://forum.xda-developers.com/showthread.php?t=1306415

[QUESTION]: HTC 7 Pro T7576 - 7.10.8107.79 - Unlockable?

I recently purchased a new HTC 7 Pro T7576 and am looking to unlock it to install the root tools.
I have spent several days trying to read up about unlocking prior to posting in this thread, but have not had much luck.
Based on my research, I understand that there exist several different type of unlocks. For the work I'd like to do with this device, I require that root tools are installed and understand that the INTEROP unlock would suffice for this as the tools are not native tools.
I have followed most of the instruction online with out much luck for setting up the device yet. The details of the device are:
Name: HTC 7 Pro T7576
Software: Windows Phone 7.5
OS version: 7.10.8107.79
Firmware rev number: 2250.21.51202.111
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Boot loader version: 2.2.5.0
The steps I've taken thus far are to take a backup of the device using zune, download the HTC_Interop_Unlock.xap and tried to install it using XAPDeployX-v0.9.
The error message I get back is:
Deployment FAILED with the following ERROR:
Failed to connect to device as it is developer locked. For details on developer unlock, visit http://go.microsoft.com/fwlink/?LinkId=195284.
Is there any luck for this device?
Thanks!

Based on some additional reading... I would require to flash the boot loader and put a custom rom.
Can anyone confirm?

After several days of research, it appears that the Interop method does not work any more.
Additionally, can someone provide some direction? I'm looking to flash but the instructions aren't clear and I don't want to brick my device.
Thanks.

Any tips from anyone? I'm trying not to avoid bricking my device.
ANy help would be greatly appreciated.

My journey for unlocking this device is still moving forward.
From additional reading, it looks like my SPL is 5.2.2.5.0 which means I must downgrade it...
The only way I see so far is with a gold card.
Given I have an OTG cable? Can I use this cable? to somehow download the bootloader?

Hi,
use this Method:
http://forum.xda-developers.com/showthread.php?t=1456200

This will work on my boot loader? Even with an SPL with 5.1.2.2250.0?

To close the loop, I used a goldcard image with the RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar.zip to create the GOLDIMG.nbh to downgrade the firmware.
Was a bit finicky, but eventually it took the update.
Next to install a custom rom...

Update: Trying to install RSPL and HSPL, but no luck
Does the DFT tool work on these devices? I've tried to go through the 126 page DFT thread (below) but no really confirmation
http://forum.xda-developers.com/showthread.php?t=1195647
If anyone can help this would be great!

Moving right along... Got the HSPL flashed. Had to use another PC.
The original PC I used was a VMWARE workstation with Windows XP, which did not detect the device.
Used a physical Win7 Laptop, everything worked just fine.
Now onto a custom firmware....

Hmm, tried to flash Dynamics v2.0, but it needs a special radio version.
I got the radio, but not sure how to flash it, can someone help explain how to do this with RUU?
Thanks.

Hi dustbyter
are you still interested in this topic? I just did the same on my HTC 7 Pro T7576
Regards

Hello,
I have been given a HTC 7 Pro T7576, Windows Phone 7.8, OS version: 7.10.8858.136, firmware rev. no. 2250.21.51101.401, hardware rev. no. 0002, radio software version 5.71.09.02a_22.51.50.21U, radio hardware version A.102.0.D4, Bootloader version 5.11.2250.0, chip SOC version 2.2.5.0
I love everything but the OS of this phone.
I am a total newbie at mobile OS but have 10 years experience with Slackware linux.
Please help me out with detailed instructions to replace Windows Phone with Android on HTC 7 Pro.
Thank you!

eaxdandroid said:
Hello,
I love everything but the OS of this phone.
Click to expand...
Click to collapse
I second this. Windows Phone 7 is a dead-end street. Therefore, nobody even cooks ROMs for these phones any more (the newest ones I could find are from 2013).
That's pretty bad since otherwise, the HTC 7 Pro is a good phone - I love its keyboard as my fingers do not seem to be compatible to touch screens
It was possible to port Android to legacy devices like the HTC HD2. Wouldn't it be possible to do that for the HTC 7 Pro, too? That would be, I think, the greatest thing since sliced bread
Kind regards,
DAC324