Hi guy,
I am having problem connect/syn my HD2 (WM6.5) with the windows mobile device centre. I pair the both and I have no problem send and receive files between them and I can also do the file transfer but when it come to synchronisation it just wont connect. I have make sure the connection setting allow bluetooth. I looked up the net and found some people the con port should between 1-20 but my only have 25 and 26 to choose from on my HD2. I can can see the device connect to the PC using 25 or 26 but nothing happen. Also, when I open the bluetooth explorer I can see another port (15) but it is not showing on the HD2, I can also connect it but nothing happen either.
So, in a nutshell I can see com prt 15, 25 and 26 and I can connect all of them with the pc but none can do the wireless syn why?
Any help and advice will be very grateful.
Many thanks in advance
Dan
got an x1 and windows7 64bit ultimate
got the latests sync center
had my x1 connected with usb
but had not setup bluetooth bunding at all yet
your posts made me
turn on bluetooth look for bluetooth devices on x1
found the pc put in the passcode
acceppted the passcode on the pc
picked the profiles under advanced on the x1
it was bound
opened activesync on x1
clicked sync by bluetooth in the menu
and it did
Related
hi iam using o2 mini
and i just upgraded its rom to the 1.11 qtek version
but
when i connect via active syn using the microsoft stack on both mini and my laptop ..
it keeps on saying OPENING PORT asnd then says that the port is busy or being used by some other device
i have matched the port available to the one in active syn
but
its not working
tried other ports too
dont know what to do ???!!?!?!?!?!?!?
PLEASE HELP
open your bluetooth setting first then add incoming port... to your o2 mini active sync, tap onnect via bluetooth...
solution that works
Hi,
I've found this article on another forum. I have tried it and it works !!!
1 To sync with BT first delete all your pairing with your computer and phone on both devices.
2 Go to BT Manager on your phone and click both check boxes for Inbound and Outbound COM ports and pair the devices.
3 Once they are paired go to BT manager (on the phone) again and click on the start button (for BT ActiveSync setup) and pair the devices again if you have to.
4 Once that is done make sure that on the computer in BT Settings the the Serial Port Profile (SPP) "Serial Port COM4" is checked.Click on the phone device>property>services.
5 After that on the computer's BT Manager itself ensure that the COM ports folder shows incoming and outgoing ports with the phone's name in front.
6 Open ActiveSync (on the computer) ensure that the COM port no. is the same as the Incoming COM port no. given in step 5 above and it being shown as available. Sometimes if it is unavailable, the computer needs to be rebooted and then it will be shown as available.
7 Click on ActiveSync thru BT on the phone and it should work.
8 Whenever you wanna disconnect ActiveSync press stop on the compouter to disconnect.
I love the phone but I cannot believe that its so hard to sync with Vista via Bluetooth. It has the latest mobile software and vista is the new OS, how can they **** things up so badly?
I know there are some issues with the Sony Vaio Bluetooth stack. Its super confusing and the Bluetooth settings are hard to find.
Is it actually possible to Sync with Bluetooth to vista from WM6? Has anyone got this working?
Thanks, even a yes or no would be great here, so that I know if I'm wasting my time.
Ben
I did. After connecting my TP to the PC via bloetooth, i synced them, but using the phone's ActivSync, and not the Windows Mobile Device Center.
You need to go to your phone and instruct a "bluetooth activesynce".
It worked fine for me and my Vista SP1, using a dead-cheapo USB-bluetooth adapter.
Got it working too. Paired the 2 devices and entered passcode. Then started AS on the phone and selected Connect using BT and off it went. No problems what so ever.
Its good to hear that it works for people.
I think its an issue with the Sony Bluetooth stack. I can pair the devices but the device doesn't show that the laptop has activesync, just wireless stereo. I think I might hate Sony more than Microsoft, Mac next time for sure, so so sick of Vista and spending a week online working things out.
Its a long shot, but I don't suppose anyone has it working on a Sony Laptop with Vista?
Thanks for the replies and listening to me moan.
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
Did you try this https://forums.microsoft.com/WindowsMobile/ShowPost.aspx?PostID=2382825&SiteID=65
I had the same problem with my VAIO TZ and my Tytn II, didn't try with the TP yet.
Apart from replacing the drivers, I seem to remember there was a trick related to changing the COM Port or something (the default port was incompatible with Activesync) but I'm afraid I don't remember. I'll give it a go when I have time to connect both, but it may not happen until I getmy new laptop.
EDIT: forget the above, that's the trick I half remembered (and used): http://forum.xda-developers.com/showthread.php?t=397419
i have the same problem with Toshiba laptop..i have tried everything
remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
If this is the case, try adding comm port for both your laptop and tp. Outgoing for TP and incoming for laptop. Then you need to set Windows Mobile Center to connect via COM?? (?? is the number you've chosen)
ActiveSync connection (via bluetooth) is actually a comm port connection.
lbhocky19 said:
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
Click to expand...
Click to collapse
Try removing the pairing and rebond.
It also works fine for me with Vista (non-SP1), newest version of Mobile Center, and a Bluetooth dongle with Microsoft stack.
This worked for me
I used many websites, a lot with very similar advice, but none specific to the HTC touch Diamond conundrum.
However, this is a very useful step by step guide:
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth/, which although provides advice for WM 5, is still the same principle.
The advice below is device specific
I use:
HTC Touch Diamond (with WM 6.1)
WMDC 6.1
Bluesoleil V6 Bluetooth Dongle
Although I had found the above advice on previous websites, and it had not worked I remained persistent.
I was able to find 'Activesync' as a service when, on my PC, changed the WMDC connection settings to COM 3.
However every time I tried to 'connect via BT' on my device, it said 'no partnership existed......'.
I therefore established some more com ports on my computer (in addition to COM 3, COM 4, COM 5 which I had taken authorisation off of):
COM 6
COM 7. Both without authorisation.
I then used the trial and error method to find which com port would broadcast 'activesync' to my device. It was still COM 3.
However, on trying 'activesync via BT'on my device this time, it began to connect!!!
I am not sure whether opening up the extra ports (COM 6 and COM 7) or whether my computer/device decided it was now the time to play ball since it realised I was about to take a cricket bat to it worked but it now syncs fantastically.
NB: There was no need to reinstall any software or windows operating system (as some other posts on other websites have suggested)
I still cannot get this to work. I couldn't on my Sprint Touch and now I can't on my Touch Pro.
I have Vista Home Premium SP1 with WMDC 6.1
Computer was formatted to factory settings today. Touch Pro is new as of yesterday.
I paired the phone to the computer and the computer to the phone. ActiveSync was a profile available for the computer and I made sure it was ticked.
I plugged in the phone via USB and set up the partnership. All is good there.
When I open ActiveSync on the phone and click "connect via bluetooth" it tells me it cannot open the port.
This is the exact same problem I had with my Touch. The computer is newly formatted and isn't communicating with any other bluetooth device at all. How can the port not be available? I've tried the regedit. Tried making incoming ports on the computer. No avail. However, I cannot make new outgoing ports on the phone. The tab is there but no option to do so.
Any help?
Thanks in advance
EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
P/S :- BTW i just bought my HTC TP 2 weeks ago ...
woks perfectly!!!
many thanks.
Has anyone been able to get ActiveSync to work over Bluetooth in Vista with a 2125? Which English ROM will I have the best of luck with as my USB Bluetooth on my desktop computer running vista ultimate x86 keeps telling me that my phone doesnt support activesync over bluetooth.
Also where can I get the Stock Cingular ROM for my 2125?
Can anyone point to to a guide on how to set it up?
any ideas?
many thanks,
SG
No one has because you dont need Active Sync in Vista, Vista comes preloaded with Windows Mobile Device Centre
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
SomeGuy2008 said:
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
Click to expand...
Click to collapse
Have you done a wired sync with that computer before? If not, you should do it. I've read that in the past. It fixed a sync problem with one of my phones, however, I've done it w/o too and it works. Have you created a BT Partnership between your computer and your phone? When you create the partnership, click on Advanced, re-confirm the PC name, then on the Services Window, checkmark Active sync. Then open active sync on phone, and click on right menu and chose Connect via BT. It should work. Good Luck!
EDIT: The partnership has to be created from the phone, not from the PC. If created from the PC, as far as my experience, it'll create a Modem Dialup connection partnership that will allow the PC to connect to the internet via BT using Wap connection on your phone. If you do want to create that too, use *99# as the dialup phone number. Leave blank the User name and PW.
Thanks for the reply.
When I try to setup a partnership from the phone I see my computer but I only see 3 service. Stereo somthing, handsfree, and something else but none of which are active sync. Yet when I look on my computer I see that activesync is in the list and selected.
I have a IOGear BT211 (Broadcom 2045) USB Dongle running in Vista Ultimate SP1.
Could it be my BT211 Driver? I have the latest version 5.1.x
Thanks,
Well the new phone I bought has all the drivers for Vista on CD. But its installed on my son's Laptop and he don't let daddy get nearby his toys LOL so, I really couldn't help more. I do know active sync works over BT with Vista. So I guess you'll have to keep trying. Do you have any instalation CD for your phone? From what I remember, if you don't have the "Outlook" that comes with the phone instalation, you might not be able to. I remember it didn't work untill we installed the one on the phone CD. All though, his Laptop had MS Office already installed. So... take a look around that.
My Bad. I had the wrong Window drivers installed for my BT on my desktop. LOL. Who would have though that the Windows XP drivers wouldnt work under Vista? lol
Thanks for the help.
GD
activesync (Windows Mobile Device Center) via bluetooth on Vista
I went through a similarly difficult experience with a Lenovo laptop. I blogged about it here:
http://mitchwyle.blogspot.com/2008/11/activesync-via-bluetooth.html
so i just got the new 1005ha asus netbook today and spent the day setting it up as well as the bluetooth to the fuze. i got it to work with my stereo headset as well as to use data over bluetooth for internet
but i cant seem to make it sync up through activesync for file sharing
any help?
ive had the computer setup a port and told the phone to search in activesync and it doesnt find the com port just the same services each time
OK, sorry if you already did all this, its not 100% clear from your posts:
Create a new incoming port on the PC in bluetooth properties. (exactly where this is may vary - on my win xp its called "bluetooth devices" in control panel)
open active sync (on the pc). File / connection settings. check "allow connections to one of the following" <select the com port you just created>
make sure the pc is discoverable & phone bt is on
on the phone - open bluetooth settings and add a new device
select pc, pair, save etc
hopefully now the phone will see the pc, and activesync will now be available as a service
select sevice, save etc.
launch activesync on phone, and select "connect via bluetooth"
remember to disconnect when you're done! - it wont close the bt connection just because its finished its sync
Ok guys, here is the scoop:
I just purchased a new laptop with the following relevant specs:
Windows 7 Home Premium
Integrated Broadcomm Bluetooth Adapter
Windows Mobile Device Center 6.1
I am using the standard (non-modified) T-Mobile HD2.
When I try to pair the two, there is an error on the laptop talking about how the "Bluetooth Peripheral Device" driver did not install properly, but others did. I can use some functions of the bluetooth pairing such as going through the file system to the device and transferring files from the phone to the computer. However, Windows Mobile Device Center does not recognize the phone as "connected" even though the option to allow the phone to connect via bluetooth is selected.
Also, I can not go through my phone to "push" a file from the phone to the computer. Actually, any bluetooth related action fails if initiated through the phone.
I have searched for hours on this issue and can not seem to find a resolution that works anywhere on the internet.