Thanks in advance. I flashed a ROM, when i turn on my device, it is stuck on the "Touch Pro 2" splash screen and never goes past. I can enter bootloader. Do I have a corrupt ROM? How can I get the phone working? Thanks again!!
first, what ROM are you using? is your device a GSM (AT&T/T-Mo) or CDMA (Sprint/Verizon) model?
when you ask questions about this kinda stuff, you always need to be as specific as possible. we won't be able to help you until we know these things.
Based on your prior posts, I will assume you have a Tilt2 on AT&T. You can get your phone back up and running by downloading another ROM, and flashing from the bootloader.
thanks. Verizon. I was told I have GSM phone, so I flashed GSM. Bootloader says RHOD500. SPL-1.00.0liNex. The ROM I thought I flashed was EnergyROM_28002_RHODIUM_20.Nov.2009_StandardM2.5.rar. Thank you so much for your kind consideration and help in this matter.
NATF, thanks, how do I flash from bootloader? FYI, we moved off of AT&T onto verizon. I got the andriod but it gave me hemaroid so I got rid of it quick and got the Touch Pro 2. Thanks for all your Fuze ROMS!
Oh you have Verizon now... me too...
Your phone is frozen because you likely flashed the GSM Energy ROM, not his CDMA release. You can have a look at my CDMA ROM (shameless plug), or check out Energy's CDMA ROMs posted over at PPCGeeks.
I'm also moving this thread to the CDMA section.
I think I figured it out. I copied your ROM to the root of my microsd of my fuze (since I could get to that one), then put it in the TP2, went into bootloader with very little expectations, and I got the instructions for flashing from the card on bootload! Why did I hear a scream when the phone booted? Scared the crap out of me!!
louplou said:
I think I figured it out. I copied your ROM to the root of my microsd of my fuze (since I could get to that one), then put it in the TP2, went into bootloader with very little expectations, and I got the instructions for flashing from the card on bootload! Why did I hear a scream when the phone booted? Scared the crap out of me!!
Click to expand...
Click to collapse
Scream?
it was the strangest thing, a 3 second audio clip played as soon as the phone booted the first time during the install of your ROM. It could have been from my PC, I thought it was an easter egg you put into the ROM, but I should have known better.
NotATreoFan said:
Oh you have Verizon now... me too...
Your phone is frozen because you likely flashed the GSM Energy ROM, not his CDMA release. You can have a look at my CDMA ROM (shameless plug), or check out Energy's CDMA ROMs posted over at PPCGeeks.
I'm also moving this thread to the CDMA section.
Click to expand...
Click to collapse
I just had to make an account to say thank you for tip. I am completely new to the cellphone phone world, but had to shell out for a good one because I don't get internet to my house where I live.
I flashed my CDMA Rhodium with a gsm rom and had no idea there were a difference. I was dreading the idea of having to drive a hundred mile to the sprint store and lying about how the phone stopped working.
Good thing I tried your rom and now the phone is working again. It even gave me more free storage space on the phone.
where is this rom to fix the black screen
i have the same problem but can't find your shameless rom
figured out the scream
NotATreoFan said:
Scream?
Click to expand...
Click to collapse
I figured out the scream, it was the notification on an incoming text "Boom Goes the Dynamite".
louplou said:
I figured out the scream, it was the notification on an incoming text "Boom Goes the Dynamite".
Click to expand...
Click to collapse
Oh... that scream. It comes courtesy of Cleveland Brown.
Related
So I haven't been here in a while but it seems that everyone and their Mom are making Rom's for HTC devices. Also it seems the tilt is known by a few names so I never am quite sure if I'm reading info for the right phone.
I looked at the wiki but a lot of that information is old. So I guess my 1st question is this:
My company is getting me a AT&T Tilt and the 1st thing I want to do is get rid of the bloatware from AT&T. There doesn't seem to be a catch all for all things related to the tilt.
So what ROM's are stable enough to install?
Are these phones unable to be sim unlocked (not like it matters)?
ISo you can flash the Radio ROM seperate from the Phone RIM (I'm so confused)?
And finally this phone can still be CID unlocked (Which will need to happen)in order to flash a unofficial "cooked ROM on to the handset)?
If there is one post that shows all this info that would be awesome. I've followed a few threads but the information seems disjointed and then others start talking about handsets similar to the tilt but I don't know if it applies.
Soft for all the newbie questions.
I had a TMo Dash and MDA and then a Cingular 8125. That was over 6 months ago. Started a new job and they made me go to a blackberry. Then we got bought by Qualcomm so now I have convinced my boss to get me this phone.
Thanks in advance
It's all here. Your Tilt is an HTC Kaiser and you're in the right forum! Some quick answers:
HardSPL gives CID unlock
No free SIM unlock yet
All ROMs are stable.
Independent radio flashing is limited b/c AT&T's latest ROM features a radio unique to it. Sound is lost if either of the two appear separately. Orange ties SIMLock to their radio so if you flash a different radio on an Orange phone, you will need to sim unlock with several of the free unlockers to get up and running again. However you can flash a different ROM on Orange w/o touching the radio and everything's golden still.
Look at the sticky threads in upgrading for more complete answers. Happy hunting!
Nice executive summary Sleuth, however I have difficulties to understand what you mean with this:
Sleuth255 said:
Orange ties SIMLock to their radio so if you flash a different radio on an Orange phone, you will need to sim unlock with several of the free unlockers to get up and running again.
Click to expand...
Click to collapse
What exactly do you mean with several of the free unlockers?
oops damn, what a typo! I meant "several of the not-free" unlockers....
Try looking here as well:
http://forum.xda-developers.com/showthread.php?t=341024
Sleuth255 said:
oops damn, what a typo! I meant "several of the not-free" unlockers....
Click to expand...
Click to collapse
No worries, actually a very interesting phenomenom.
Did any of the guys have to do a double unlock? (i.e. before and after they moved to orange radio). And were the codes different?
hope this helps
hardspl is necessary for ROM flashing (sleuth kinda glazed over it)
when you put on hardspl, it won't look like anything was done, but you can then flash ROMs as much as you'd like.
I stick with at&t ROMs to avoid radio issues.
You could always start by hard resetting and then soft resetting before the at&t customizations install. Either way it's a good idea to test out the stock ROM.
I just flashed to ConfusedStu Vista 1.3, everything went well until I got through the customization screen and now my sim has just an exclamation point by it. I took the sim out and put it in my razr and it is reading fine in that. Anybody have any ideas that can help me out. Even though I dont have a lot of posts Im not new to doing this or to the site, Ive been flashing my wizard for 2 years now and my tilt for about the last month and a half. Any advice is greatly appreciated. I also will say I tried to reflash radio 1.65 and that didnt help either.
xtremdremz said:
I just flashed to ConfusedStu Vista 1.3, everything went well until I got through the customization screen and now my sim has just an exclamation point by it. I took the sim out and put it in my razr and it is reading fine in that. Anybody have any ideas that can help me out. Even though I dont have a lot of posts Im not new to doing this or to the site, Ive been flashing my wizard for 2 years now and my tilt for about the last month and a half. Any advice is greatly appreciated. I also will say I tried to reflash radio 1.65 and that didnt help either.
Click to expand...
Click to collapse
i usually remove sd and sim before i flash a new rom. What does it say or show on the screen when the sim is inserted? and what does it say on the screen when the sim isn't inserted? If it says the same thing i can't help you.
try a hard reset too.
When the Sim is inserted is says nothing, just has the exclamation point by the signal meter and and x by the data connection. When the sim is not in the phone at all it gives me the no sim inserted emergency call if provider supports it. I tried to reflash the rom with the SIM out and still get the same result??? Kinda Screwy
most likely its the phone that's the problem. because if your sim was fried it wouldn't work in the razr. the razr couldn't be able to recognize the sim card at all if it was fried.
xtremdremz said:
When the Sim is inserted is says nothing, just has the exclamation point by the signal meter and and x by the data connection. When the sim is not in the phone at all it gives me the no sim inserted emergency call if provider supports it. I tried to reflash the rom with the SIM out and still get the same result??? Kinda Screwy
Click to expand...
Click to collapse
you may need to install another radio that is compatible.
Is this a new or an older SIM? Check the gold contact points on the bottom. I've used a pencil eraser to go over mine and have gotten a SIM that had stopped working ot start working again (back on my Wizard). The local AT&T stores by me (not the Spring ones, but the true AT&T ones) are good about replacing sim cards for free when I've had issues (I had a sim card out one day and my dog got hold of it off the table. Called the local AT&T store and they guy laughed then said bring it down and he'd give me a new one. Waived the $25 charge. My wife has had her sim card replaced for free also in the past from the same store. YMMV).
redbandana said:
you may need to install another radio that is compatible.
Click to expand...
Click to collapse
Tried that one too...lol. I searched and searched, I tried different ROM's with their respective radios and still same results. Looks like Im flashing back to stock and Warranty has another one coming. The funny thing is, it still tells me I have a voice mail and shows my number under the phone screen, which tells me its reading the SIM
xtremdremz said:
Tried that one too...lol. I searched and searched, I tried different ROM's with their respective radios and still same results. Looks like Im flashing back to stock and Warranty has another one coming. The funny thing is, it still tells me I have a voice mail and shows my number under the phone screen, which tells me its reading the SIM
Click to expand...
Click to collapse
if it works with the stock rom what are you going to say to the warranty people? "it doesn't work when i flash dutty's rom" lol.
mfrazzz said:
Is this a new or an older SIM? Check the gold contact points on the bottom. I've used a pencil eraser to go over mine and have gotten a SIM that had stopped working ot start working again (back on my Wizard). The local AT&T stores by me (not the Spring ones, but the true AT&T ones) are good about replacing sim cards for free when I've had issues (I had a sim card out one day and my dog got hold of it off the table. Called the local AT&T store and they guy laughed then said bring it down and he'd give me a new one. Waived the $25 charge. My wife has had her sim card replaced for free also in the past from the same store. YMMV).
Click to expand...
Click to collapse
Its the new AT&T SIM. Its wierd, works perfect in my razr just not in my tilt. and like i said in previous post all the signs are there that it is reading my SIM Just not registering on the network for calls or data???
redbandana said:
if it works with the stock rom what are you going to say to the warranty people? "it doesn't work when i flash dutty's rom" lol.
Click to expand...
Click to collapse
yeah they would LLLLOOOOOVVVVEEEEE that. LOL I just tried with the stock ROM and the SPL changed back, everything to stock and still no luck. Still get the voicemail icon and the message that I have a Voicemail though.
try going into settings>personal>phone> then to the network tab and select find network with stock rom and radio.
xtremdremz said:
I just flashed to ConfusedStu Vista 1.3, everything went well until I got through the customization screen and now my sim has just an exclamation point by it. I took the sim out and put it in my razr and it is reading fine in that. Anybody have any ideas that can help me out. Even though I dont have a lot of posts Im not new to doing this or to the site, Ive been flashing my wizard for 2 years now and my tilt for about the last month and a half. Any advice is greatly appreciated. I also will say I tried to reflash radio 1.65 and that didnt help either.
Click to expand...
Click to collapse
Check and see if the phone is turned off. Happened to me a couple of flashes in a row, sometimes you end up with the phone turned off. Just open the comm manager and turn it back on.
shutter13 said:
Check and see if the phone is turned off. Happened to me a couple of flashes in a row, sometimes you end up with the phone turned off. Just open the comm manager and turn it back on.
Click to expand...
Click to collapse
oh yeah forgot that one too.
redbandana said:
try going into settings>personal>phone> then to the network tab and select find network with stock rom and radio.
Click to expand...
Click to collapse
Tried this once and it didnt do anything, hard reset, tried searching again, went and grabbed a drink and after about 15 minutes it found network and all is good. Now back to flashing my 6.1 ROM. Ill never learn, but its so fun to have a phone that takes over all me free time on the road.
Thanks to all that helped and had some ideas. Thats why I love this place. Thank you.
the first thing you do after you flash a new rom is hard reset, now I am using the same rom as you are and all you have to do is go into your commmanager and turn flight mode OFF, push the button with the picture of a phone on it, then your phone will customize your connections to your carrier
n00b
tubaking182 said:
the first thing you do after you flash a new rom is hard reset, now I am using the same rom as you are and all you have to do is go into your commmanager and turn flight mode OFF, push the button with the picture of a phone on it, then your phone will customize your connections to your carrier
n00b
Click to expand...
Click to collapse
I have already flashed My tilt with just about every ROM out there just to have fun and see what the differecnces were, WITH NO PROBLEMS. Then I tried to flash it with the new ROM and had the problem. I appreciate you trying to help but how you gonna end with calling me a n00b, when I have more posts than you and have been here a lot longer. But thanks for the help.
tubaking182 said:
the first thing you do after you flash a new rom is hard reset, now I am using the same rom as you are and all you have to do is go into your commmanager and turn flight mode OFF, push the button with the picture of a phone on it, then your phone will customize your connections to your carrier
n00b
Click to expand...
Click to collapse
ya that was unnecessary. he clearly knew what he was talking about (but maybe didn't explore different avenues before asking). in addition, its not necessarily true that the phone customizes for you.
redbandana said:
i usually remove sd and sim before i flash a new rom.
Click to expand...
Click to collapse
Is removing sim really necessary? I’ve never had any problems flashing with my sim in...
Sane said:
Is removing sim really necessary? I’ve never had any problems flashing with my sim in...
Click to expand...
Click to collapse
no its not necessary but i do it out of precaution that something bad might happen.
redbandana said:
no its not necessary but i do it out of precaution that something bad might happen.
Click to expand...
Click to collapse
I flash only via sd card and I have never taken out my sim card and I have never had one glitch at all. In my humble opinion, flashing via sd card is much quicker and safer.
Hi,
I am on a mission today, to upgrade my phone. Currently I have Windows Mobile 5.2.21812 and its very unstable.
I know nothing about flashing these, as I bought the phone from EBAY not knowing it had Windows Mobile 6.5 on it.
I notice reading in the forums, I need to know if its CDMA, or GSM etc ? How would I tell that please? Phone is HTC Touch Pro.
Many thanks.
Stevey G
steveyg said:
Hi,
I am on a mission today, to upgrade my phone. Currently I have Windows Mobile 5.2.21812 and its very unstable.
I know nothing about flashing these, as I bought the phone from EBAY not knowing it had Windows Mobile 6.5 on it.
I notice reading in the forums, I need to know if its CDMA, or GSM etc ? How would I tell that please? Phone is HTC Touch Pro.
Many thanks.
Stevey G
Click to expand...
Click to collapse
If your phone has a SIM Card Slot then its a GSM Model. If it has no SIM Card then its CDMA.
Ohhhh I see Thank you ever so much.
Would this be the right ROM to use - just making sure, before I start to read all the instructions ..............
http://forum.xda-developers.com/showthread.php?t=536751
You didnt say what phone you have - so we cant tell!
If you have a GSM phone (sim card) then you want to start reading here If however you have a CDMA phone (no sim card) then here would be a good place to look
Beeble said:
You didnt say what phone you have - so we cant tell!
If you have a GSM phone (sim card) then you want to start reading here If however you have a CDMA phone (no sim card) then here would be a good place to look
Click to expand...
Click to collapse
I did, if you read my first comment above, look at the end you will see HTC TOuch Pro
Anyway.........
I notice several things I don't understand - RADIO, UC Capable & SPL Version as found here....
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Cooked_WM6.5_ROMs
Could someone explain please?
Anyone able to assist ?
steveyg said:
Anyone able to assist ?
Click to expand...
Click to collapse
Steveyg, Touch Pro's are CDMA too. No one wants to help you if you're going to brick your device. Are you GSM or CDMA? We will assist as much as possible, but help us by answering that simple question.
Ohhh I understand now
Mine is a phone with a SIM, thus GSM is that correct?
steveyg said:
Ohhh I understand now
Mine is a phone with a SIM, thus GSM is that correct?
Click to expand...
Click to collapse
Yep, you should be good to go. Now,
steveyg said:
I notice several things I don't understand - RADIO, UC Capable & SPL Version as found here....
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index...ked_WM6.5_ROMs
Could someone explain please?
Radio is comparable to something like your WiFi card in your laptop. Depending on your location, etc, some radios are better than others. They control your signal, GPS, WiFi, etc. The most used one that I've seen is 1.14.25.35
UC Capable is something you need when you start cooking. If you're new to the Raph, you probably don't need this info yet.
SPL is the most important. Since you bought your device pre-flashed with 6.5, is should be hardSPL. This helps prevent your device from becoming an expensive paperweight. Now, it helps, but doesn't guarantee. If you put your device into bootloader (hold vol-, hold power, and reset with stylus) your device at the top of your screen should say something like SPL-1.90.Olinex. This means it's hardSPL and you are able to flash custom ROMS, like the NRGZ28 ROM you linked to. As long as they are GSM you should be able to flash any ROM for the GSM Touch Pro.
These are the basics so just keep reading the wiki. I will answer any questions I can, so just shoot me a PM if needed
Hey, if you want to flash your Raphael, I'd recommend you read this
I did my first, regardint this thread, and actually worked, really simple if you ask me!
Some suggestions: Leave the radio, for first, just do a simple ROM flash, and after that if you find it nessescery you can do it later.
The only ROM I tried for my Raphael is TAEL's ROM, it's amazing compared to the stock ROMs!!! If you're intrested click on it in my signature!
I have the following ROM;-
r:- 1.11.25.01
g:-52.58.25.30u
d 5. phoenix
Do I have to revert to a OEM ROM? If so, where do I find those please?
Good news, I've been sucessfull Phoned imaged to TAEL Roms - very good.
Could of questions;-
1. Don't have the sat nav the other image had. Can't remember the name of it. but I used to use that quite alot. Does anyone know where I can download it from?
2. Used to have an application called FLASHLIGHT - great little app. Its a TOURCH application that used the FLASH Light. Really handy. Where can I download it please.
Many thanks.
Stevey G
1) are you talking about the garmin or tomtom gps software? or the one where you use the GPS to lock down a location (kinda like "dude where's my car?" app for the iphone)
search on the forums under software development subforum. it's called Torch.. that or NueLight.
Thanks I managed to find the torch light thing, but still can't find the sat nav. Not sure what the name was. It was really good though. Wasn't the tom tom navigator. Wish I made a note of it, as it was fully working version :-(
are you talking about the GPS navigation software? if so then it's either garmin (mobile XT) or tomtom
Hi,
Looking on my storage card Managed to find the name - AUTO MAPA. Tried to load it from the storage card, and it works. So I have copied the exe to the start menu, multimedia folder and it works great
Whats this GARMIN Mobile XT like then?
Since updating to TAEL Rom, my signal is very low and keeps disconnecting from the network.
Do I need to upgrade my RADIO then?
My version is;-
1.11.25.01
I found this one, would this work ?
http://www.4shared.com/file/133094257/1e1ce983/BlackStone_Radio_1172509.html
try testing other radio. I changed my radio to the new ATT official rom (not so new anymore but it was the latest updated ATT rom). Test it out for a few days each and map out what you think works best and keep to that.
One thing I noticed is that some radios will crash your phone after a call.. they may give you better signals, but it will crash your phone, so be aware of that.
Hi,
Thanks for the message. Does it matter that I am on TMOBILE and not ATT ?
http://www.youtube.com/watch?v=9W7Kfucgeck
I've hard reset it like advised and haven't installed any 3rd party apps.
After I wait a few hours, the phone will start to respond, but will be significantly sluggish.
I believe I should have posted this in the general section (Not sure, I'm fairly new to these forums)
AB_ said:
http://www.youtube.com/watch?v=9W7Kfucgeck
I've hard reset it like advised and haven't installed any 3rd party apps.
After I wait a few hours, the phone will start to respond, but will be significantly sluggish.
Click to expand...
Click to collapse
I think it's time you bring it to your local Verizon store and show them. Tell them "Look, I turn on the phone, and I can't use it!" I'm guessing they're smart enough to realize you need a replacement because that's not normal. I'm sure they'll give you another replacement.
If they don't, flash a ROM and see if it works. If everything works with the custom ROM, then it was obviously a Verizon stock ROM flaw (which I doubt since this doesn't seem common).
Yea, I had to pay for my first replacement ($50)
I hear the official 6.5 is out, where can I find that?
Also, I don't know the first thing about flashing phones with custom ROMs
AB_ said:
Yea, I had to pay for my first replacement ($50)
I hear the official 6.5 is out, where can I find that?
Also, I don't know the first thing about flashing phones with custom ROMs
Click to expand...
Click to collapse
Pshh.. they gave you a faulty one now, so you shouldn't have to pay for the next replacement!
Officially, WM6.5 for the TP2 is for the Unlocked GSM European TP2. It's only for GSM networks, though (you have CDMA, so you can't flash that!).
Custom ROM flashing: I learned from a pictorial. Just follow everything! Always flash a CDMA Rhodium/TP2 ROM (you can find those at PPCGeeks) to your Verizon/Sprint/Telus TP2.
Most ROMs are not going to be suited for your phone (keyboard), so some fixes are found here.
Some of the famous CDMA ROMs are MightROMs and EnergyROMs. Find one that suits you!
*CDMA = Sprint/Verizon/Telus
GSM = Unlocked/Tilt2/T-Mobile* ROMs are made specifically for one network, and a particular device. So, never flash a GSM ROM onto a CDMA phone, and never flash a TP1 ROM to a TP2.
Good luck!
sumflipnol said:
Officially, WM6.5 for the TP2 is for the Unlocked GSM European TP2. It's only for GSM networks, though (you have CDMA, so you can't flash that!).
Click to expand...
Click to collapse
Actually, the US Cellular TP2 also comes with 6.5. If you don't have a US Cellular phone though, you still can't flash it and will need a custom rom.
Wow, you guys are extremely helpful over here.
So I should flash it, or ask for a new one?
Acorns said:
Actually, the US Cellular TP2 also comes with 6.5. If you don't have a US Cellular phone though, you still can't flash it and will need a custom rom.
Click to expand...
Click to collapse
I heard about that. However, like you said, it wouldn't be great with a Verizon phone since I doubt there's an official ROM floating around (there would be a ROM dump on PPCGeeks) but why would anyone want a stock ROM to replace a stock ROM?!
AB_ said:
Wow, you guys are extremely helpful over here.
So I should flash it, or ask for a new one?
Click to expand...
Click to collapse
Ask for a new one first because we don't know if the issue you have is due to faulty hardware or software. If it's hardware, a new ROM can't do anything. If it was software or firmware(ROM), then a new ROM should be able to fix it.
If you ever need to return the phone and it has a custom ROM, you will have to re-flash the stock ROM found at thewingster. You will then have to follow the steps to return stockSPL (very bottom of the post). If you don't do these return-to-stock steps, Verizon wouldn't accept it!
Got my new one in the maill today, for free.
Thanks guys.
now.. should I flash? I want 6.5 badddd
AB_ said:
Got my new one in the maill today, for free.
Thanks guys.
now.. should I flash? I want 6.5 badddd
Click to expand...
Click to collapse
I'm guessing wait 'til the weekend arrives. Use the phone hardcore! If anything goes wrong with it for the next few days, at least you can return it again.
If you're truly desperate, I guess you could flash!
lol there's hardcore ways to use our phone? I thought it was bad-ass all around.
Is there an ETA of when Verizon's TP2 6.5 is suppose to arrive? I thought it was December/January :\
It's out... check out the thread over at PPC Geeks.
Got it. Thanks
Just got this today.. followed the root guide and flashed the original cingular US radio, and I have no signal. Actually, I haven't had signal since downgrading to the international ROM. I flashed a newer ROM (Revolution), but still no service. What's going on here?
Can anyone help? I'm using the radio.img on the thread for that ROM right now
For some clarification, it just says "no service" and I have no bars, or data. It does show that a SIM card is inserted, however.
Did you put the cover back over the sd and sim card? It has the antenna contacts.
Thanks, bro! I feel like a dumbass now
No worries. I only knew the answer because I had the same thoughts when I was rooting mine.
Antenna contacts are on the back cover!
hyperlite1604 said:
No worries. I only knew the answer because I had the same thoughts when I was rooting mine.
Click to expand...
Click to collapse
Oh man, thank you so much hyperlite1604!!! And thanks killazys for asking the question... I feel like a fool too lol
I burst out laughing after reading the fix...Thanks for also teaching me something new, I have never ran into this problem, but sure enough it will increase my knowledge slightly ...every one that posted before me gets thanks just for making my day
Hours of work w/ no avail
ThEiiNoCeNT said:
I burst out laughing after reading the fix...Thanks for also teaching me something new, I have never ran into this problem, but sure enough it will increase my knowledge slightly ...every one that posted before me gets thanks just for making my day
Click to expand...
Click to collapse
Haha thanks for the thanks. Seriously I've spent hours re-flashing my kernel, RILs, and even changing the telephony settings via propeditor and DF manager... I even went into an AT&T store and got a new replacement SIM card b/c I thought the newer SIMs may have better reception than my old SIM card.
If only I saw this post first I would've saved HOURs But hey, at least my phone is running blazingly fast in pristine condition now
I put the cover on several times and dont get 4g anymore sometimes 3g and very few bars. This is a new phone and first root. Didnt have this problem with other phone.
quezacotl said:
If only I saw this post first I would've saved HOURs But hey, at least my phone is running blazingly fast in pristine condition now
Click to expand...
Click to collapse
That's why the gods of the internet created searching.
i did the same thing ..freaked out for about 30 min till i searched it on here and found a post about it
just had to say, i was about to freak out myself on this one, glad i searched here first!