I upgraded my gigabyte gsmart i128 to wm6.5 today. The OS works fine on ma fone till now.
My questions are:
1)In the file explorer, how to select multiple files? When I tap on afile and move the stylus up, the page scrolls down(in older versions of wm, we could select multiple files by this). Actually this scrolling feature is nice and usefull but there is no options for selecting multiple files. Can anyone teach me how to select multiple files in WM6.5?
2)I installed S2U2 in ma fone and set it to lock the fone when the backlight turns off(after 30 sec). Ok..that works fine. But when I start to play a song in WMP, it continues to play upto 30 secoonds and stops when the backlight turns off. When I again unlock the screen and click on the song, it resumes playing. Please can anyone advice me regarding this?
3)When S2U2 is not there, after 30 seconds, the fone's backlight turns only dim(doesn't turn off) and I set the settings such that to lock the fone when entering standby mode. But my fone doesn't enter this standby mode and continues this dimlight until we press a key or tap the screen. I think this consumes a lot of battery. Anyone please advice me..
These are my questions and I hope anyone 'll answer me soon..
please anyone reply abt these things..
Related
I flash the my hima with the TofClock 2.01a32WWE ROM, and it works fine, and I'm very glad with it.
But now, some time I turn off my hima by pressing the power button, the screen went black, after a while, I want to light it to operate, the hima keeping black, and the hima cannot operate any more, and I tried to call my phone(hima), the hima didn't ringing. Also, SMS, MMS, all function dead. But the same time, the 2 leds, Blue and Green/Red, flash like normal.
At this time, the only way to operate hima normally was soft-reset it by press the hole with my pen.
:shock: :shock: :shock: :shock:
Is there someone experience this situation, and is there some way to solve the problem.
:idea: :idea:
ps: in the Settings --> System --> Power --> Advanced page, the 2 options can set "Turn off device if not used for" some minutes, when "turn off" time out, the same problem occurs like above, I called it Auto Turn Off
My device is Dopod 696 (Maybe Chinese mainland version of O2 XDA II).
:wink: :wink:
I also experienced similar problems, but with the 64 version.
After a while, when I tried to turn it back on, it began to act strange. First the automatic turn off backlight option was every time reset to 10 sec and then after a day or 2 I noticed that the screen was sometimes still showing some black lines. Changing the volume still gave the corresponding sounds, but nothing else seemed to work (or wasn't visible). Normal operating mode was only reinstated after a soft-reset.
I gave it a hard reset and restored a backup (using SPB). It's operating again, but it already contains the 10 sec change.
So probably have to start clean again and install everything from the beginning, but before I do I would like to make sure it will not happen again.
Appears like the Power Off option is screwed, no matter in which way I use it (button or a program).
Anyone have any thoughts on it?
zplei
yes, i have same problem on my O2 XDA ATOM
with last rom and other
I have the same problem too, the only ay to have it back is softreset
i was using spb to toggle display mode.
someone said can be solve by reegedit. but how to.
anyone found a solution..?
I have the following little problem with WM6. Every time i press the "power button" on my device, WM6 returns to the today screen. What i really want is, that it stays in the last application which was open before i switched the device off.
This behavior is especially annoying when i use tools like "ScreenOff" which does nothing else but turns the screen off (the programs are running further). This is useful when it comes to mp3 listening or something like that. But when i press the power button to turn the screen on again there is no mp3 playing application but the today screen.
Can anyone tell me where to change that behavior?
whats the today timeout set to in settings->today->items ?
It is activated and set to 8hr.
You need to disable the password lock in Security settings. This will mean that a password will NOT be required to unlock the phone upon restart or after the pre-determined timeout.
With the password lock disabled, every time you power up your phone, it will be at the last application you had open.
I already have the password lock disabled. So that can not be the problem.
If you are using the today screen battery meter there is an option for it to do that. Annoyed the hell out of me till I disabled it.
Thank you, thank you!!!
You made my day
I am either going nuts or this is a common isue:
Normally when you tap "lock" on home screen the brightness diminishes and the phone is locked. To unlock, you have to tap "unlock" on the lower left side of the screen, hen you get a message telling you to tap again unlock in the middle of the screen and its unlocked.
Well, my Polaris only does this sequence sometimes. Especially if I let it go in standby for a couple minutes, as soon as I press any key I get another story:
In lower left corner of screen I have the word" cancel". Tapping it doesn't give me another "unlock" button on screen and the phone remains locked. I have to put it in standby from the power button and then try again to get the normal unlock behaviour.
Anyone else experiences this?
Nobody? So everybody's unlock feature works like it should?
Then I think it's reset time for my Polaris....
I personally don't use, the device lock feature... Just the standby, whith the HW buttons off... and it works just fine for me
I have noticed that when you press the central button in the TC, what you describe is what exactly happens. But this happens to me only when I do that. If a tap the screen without touching the button, I have the normal behaviour.
Yes, exactly.
@gnick: if I use the standby with HW keys lock it works ok for me also.
The issue is only with the HTC Home lock feature and the central key
dtancu said:
I am either going nuts or this is a common isue:
Normally when you tap "lock" on home screen the brightness diminishes and the phone is locked. To unlock, you have to tap "unlock" on the lower left side of the screen, hen you get a message telling you to tap again unlock in the middle of the screen and its unlocked.
Well, my Polaris only does this sequence sometimes. Especially if I let it go in standby for a couple minutes, as soon as I press any key I get another story:
In lower left corner of screen I have the word" cancel". Tapping it doesn't give me another "unlock" button on screen and the phone remains locked. I have to put it in standby from the power button and then try again to get the normal unlock behaviour.
Anyone else experiences this?
Click to expand...
Click to collapse
Yes, but very rarely and even then when I press Cancel the normal lock screen resumes and I unlock in the normal way. I have "Do not lock all buttons" selected in the Key Lock settings. Don’t know if this is significant.
2 stages for screen lock?
I use my TC while riding motorcycle, so I want several apps (TomTom, gps tracking [gps.run]), music [was WMP, but now Coreplayer] and TellmeText) running and the screen off so as to save battery power.
If you press the power button when key lock is on it will turn the display completely off, and *most* programs will keep running. TomTom is a notable exception- it stops working, presumably because it can no longer access the gps?. But better behaved/next generation GPS apps such as run.gps continue to run. WMP, bless its pathetic cotton socks, seems to work sometimes!
Are these inconsistecies uinique to my unit, or known quirks?
Anyone suggest a app that will turn the screen off and allow ALL open apps to run, including TomTom?
Thanks
I don't know how you're operating any of the buttons on the TC with riding gloves on!!
hambola said:
I don't know how you're operating any of the buttons on the TC with riding gloves on!!
Click to expand...
Click to collapse
anyone got anything more useful to add to what was a serious comment/Q
Man, the battery life sucks on this device So my quest on how to turn the screen completely off and lock the keys properly while running all software (especially GPS based such as TomTom) continues....
Anyone know of a 3rd party app that will do this?
I have not read all 200 pages, but it seems there are mixed results for running S2U2 on the Touch Cruise (http://forum.xda-developers.com/showthread.php?t=353008) ? Anyone having success?
Thanks
I know its late but I just saw this and thought I would mention that I managed to over come using TomTom without the device being on. However it doesnt save much on power as the GPS device need power to work.
But I using a simple function I wrote in my application to lock the device using the standard device lock API calls and then rather than switchingthe device into sleep mode (off) I switched it into IDLE mode, which is basically just switching the screen off, the device lock prevents any unwanted button presses.
The power button would just return this back to normal.
I have not yet worked out how to stop the device brightness changing when the screen lock is enabled on the device... :/ Which is my next task.
Ramakin...
well that would be great because even saving having the screen dimmed during lock would help battery life. And, pressing the power button to resume would be MUCH easier than stabbing around at in the sun trying to unlock the screen. It would also make TomTom behave like all other 21C GPS applications, i.e. run on idle.
So, can you send details?
During a recent motorbike trip where I just used TomTom and tracking software (even turned the phone off) I was SHOCKED at how crap the battery life was
Hey all, I am having an issue with my Tilt locking up after it goes into sleep mode or stand-by mode. Not sure which one, but it happens when I'm on a call or when I soft-press the power button, to force stand-by mode. I already disabled the "Fast sleep" & "Sleep", but it sucks the battery like crazy. I want to leave that feature on, but after a call ends after the phone goes to sleep, all I get is a black screen, like it's in sleep mode. All buttons don't respond, including the "power" button, so all I can do it a soft-reset. One thing I figured is that when I lock it BEFORE it goes into sleep/stand-by mode, I can still access it if I need to by waking it up.
I don't want to do a hard-reset right now, for those who are thinking that, & it was working fine on my stock AT&T rom, but noticed it on Dutty's 6.1 rom and now, Sleuth's 3.03 rom. I was wondering if there was a way to program WM6.1 to lock the device before it goes into sleeps/stand-by mode. I installed MortScript, but have no idea how to attach that file to run BEFORE an automatic sleep mode, forced by WM6. Any help or suggestions would be great!!! Thanks!!
This is a well known issue with the Tilt/Kaiser. It particullarly affects devices when BT or WIFI is left on & unattended.
I have used both Dutty & Sleuths 6.1 ROMs on both my devices, a Tilt & a TYTNII, without this issue occuring.
It did occur on the stock ROM, but only when left to sleep while using WIFI, GPS or BT. This can especially happen if you mess with the power properties of the devie with KaiserTweak, etc.
Hi,
I'm experiencing a strange problem with my Tornado (i-mate SP5, WM6 Platinum Edition). Today it stopped working suddenly, I had to remove the battery. When rebooting, the i-mate sceen appears, then the HTC logo, then Nitrogenius' splashscreen, then a beep sounds, and afterwards the screen is black and nothing happens, no keys are responding. I can "switch off" the phone by long pressing of the power key. Reset with pressing the 2 soft keys and the starting key does not work, the phone starts until the splashscreen and afterwards the screen goes black. Strangely I can connect the phone with activesync, synchronize contacts and calendar and even explore the device with activesync's filemanager; and the battery is charging, too.
Any suggestions except reflashing?
Regards
The same happen to me,backlight doesn't function. Start -- 9 start again 3 ok... flash light is enable ,now i should change home screen settings and power settings... set backlight to 10 minutes or more...
Then it should function
ma3ks said:
The same happen to me,backlight doesn't function. Start -- 9 start again 3 ok... flash light is enable ,now i should change home screen settings and power settings... set backlight to 10 minutes or more...
Then it should function
Click to expand...
Click to collapse
Thanks for the hint, I tried, but unfortunately I seem to miss something. Could you elaborate a bit how you managed to switch on backlight.
Thanks a lot!
EDIT: It worked! You made my day!
After pressing the keys you mentioned (and some others, too) and after rebooting again the backlight is on again. Thanks a lot!
I met the same problem in many cases and I found the culprit, it is tornadolowlight or tornadopowercontrol. while these appli are activating if I soft reset or by force restart (removing battery) then next startup will get a blank screen. But actually in this case the device is on and working only thing is its backlight is off. So, by using a torch light or simply using MyMobiler from a pc you can see the screen, and start that culprit appli then done
OR another thing I have done is I put shortkey for MultiFlashLight and whenever such situation happened I just press the shortkey and activated it and done