Easiest way to customise boot screen? - JAMin, XDA Neo, S200 Software Upgrading

I want to customise my Dopod 818 Pro G4 boot screen (appear before SPL/IPL information screen). I've tried to search forum and find this thread. But I cant download tool attached. Anyone point me the easiest way to change boot screen. I'm not a rom cooker and .cab file install to change boot screen is the best way.

Related

Problem with awizard. Please help my device is DEAD

how can I use awizard if I cant turn on my device?
I can only get to Bootloader and when I try to press U in awizard I get a popup window saying my device is not connected.
when I confirm this popup (twice) the dos window state that it is initializing and says not to remove my device from the USB and it get stuck for at least 20 minutes
I cant turn on my device so Im trying to flash some other ROMs (like imate's) but cant do that because of ID issues.
What can I do? I am fraustrated, please help, my device is dead.
Thanks
Hi,
If you device is stuck on bootloader, then you should update it with a no vendor ID rom like the one there are on the FTP ftp://xda:[email protected]/ /Prophet/Shipped_Complete_Updates/
section.
The Dopod one come with no vendor ID, but if you do so, you won't be able to change rom later.
If you have another rom you would like to use, then you should download the file ROMUpdateUtility-NoVendorID.zip in /Prophet/Tools/.
Connect your phone on usb when stuck on bootloader, extract the files of your Update Utilies (RUU ...) and change the executable with the no vendor one. You may have to copy the nbf (or something) file into the same directory as the executable.
Launch it and see if it works.
if it doesn't work then download the no vendir ID dopod rom and run the RUU, it will work but as I said, no turning back for now.
good luck :wink:
Thank you for your answer.
I have tried using this ROMUpdateUtility and it started flashing the rom, but when it got to 95% it said:
Error [326]: INVALID COMMAND
This NBF file cannot be used for your PDA phone. Please check your NBF file.
HELP
anything im trying to do, I still get this black screen with version numbers.
What is wrong?
It not that I have played with the device, it just happened. since then I am trying to flash different ROMs with no success.
Please HELP.
I guess your prophet IPL and SPL is 2.15.xxxx
If yes, the only rom you can is Dopod newest rom.
Please, please, please, please help me.
I have HTC charmer and unfortunately put an dopod latest rom in it & now I am stuck in bootloader mode.
Please tell me & help me as I tried many roms but with no success.
I want to revert back to MDA Compact II rom.
Please Help.
SPL is 2.15

bootable SD image

Does anybody know where I can find bootable SD rom image from Qtek S200? I`ve been looking on the forum and xda ftp but there`s nothing. At present I have Wizard Love rom on my Qtek. Unfortunetly it stops at "Tap the screen to proceed". I can`t upgrade rom to original one using RUU and bootloader mode.
if you boot into the bios screen, (turn on the phone while holding the camera button), then disable the activesync process wcescomm.exe then you can put the default rom back on, like the NVID version etc.
hope this helps
check the window version on ur pc
the liknks posted refuse to work on vista many a time.
try using XP for better results..
its damn hard to brick your phone you know
I am using windows xp.
I`ve tried to put orignal rom back but I get this ERROR [238] : FILE READ. I`ve tried to use diffrernt roms and RUU`s but nothing helps. Maybe it`s because I have right know Wizard Love rom on my Qtek?
I don't think bootable sd image is possible now, or ever unless someone who knows how its is prepared to put in a lot of work. but I am no expert in these matters it's just that I've read a lot of threads, you see things like http://forum.xda-developers.com/showthread.php?t=285346 but I still haven't read of anyone having success with this. </speculation>
I remember a few thread where someone put a wizard rom on his device and at least one managed to recover it somehow. Search in the threads for "prophet bricked" or something...
edit, found the thread I was thinking of, not so helpful as I thought...
http://forum.xda-developers.com/showthread.php?t=292667&highlight=prophet+dead

Help !!!

HI....
for a while I had flashed the German Rom WM 6 to my wizard.
It works and Im happy with it .
But now after a complete power up it starts after a short loading (windows) directly with the password inquiry on the screen. That normaly is displayed after the screen callibration.
And I can´t type in the password and when the wizard says it is wrong.
So I tryed to flash a new image, no chance !!!
The ruu says That is not the right version or error 300 no conection when I start with the boot screen after power up and camera button.
The IPL is 2.21.0001 and
the SPL is 2.G4.4PDA
Maybe there is some help outside here
Thank you
First you identify your wizard
you have a G4 wizard and I believe that u r trying to flash with a G3 rom thats one error i can see.
second most important thing is try to hard reset your device first to come back on the normal situation and then again go through with step by step for CID unlock. which you need to flash your rom then go through with this link which you can find on Wiki also.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
then try once again
hope this solve your wizard probem
I tried to flash the old g4 rom that i have since 5 month

I need help

I accidently HardSPL my Qtek 9100 phone with PProphet LF Xtreme BLUE V2
and now my phone is getting hung after showing first boot screen HTC INOVATION and comes to the blue page imate where it shows the IPL , SPL, GSM and OS information.
what will i do now please help me to revert my OS
by searching xda developers forum i come to reach at this URL http://forum.xda-developers.com/archive/index.php/t-275350.html
by pressing and hold camera button and turning on the qtek 9100 it comes to the multicolor boot screen here i connect my phone with usb and it shows usb at bottom of the screen of phone.. but now what should i do to revert back or to make my phone use able as i HardSPL my phone with wrong ROM
please help me, i will be very thankful to you guys.
waiting for replies, kindly reply me asap, i know you guys can do help me.
What IPL/SPL...? it displays? What exactly you mean by 'as i HardSPL my phone with wrong ROM' ?, Did you actually apply HardSPL (Patched IPL/SPL),does it show IPL 2.21.0001 and SPL 2.21.olip ? or it shows original official IPL/SPL.If its still with Official Bootloaders,then download the Official Qtek rom and flash it in Bootloaders (MultiColor Screen),when you get it and usb appears at the bottom of the Bootloader Screen,hope it'll work.
You can download the official Qtek rom from this link :-
http://s131209249.online.de/vodafone_software/9100.htm
Good luck!
Thanks zabardast_1
I solved my problem by the help of xda-developers I found another thread where i found the solution i was doing a little mistake that i wasn't disabling the Active Sync now I am happy and looking for some more custom roms
Thanks

Need help installing Windows Mobile 6.1 on HTC TOUCH (Vogue)

Hi Everybody. This is my first post here
I own an HTC Touch (Vogue) from Orange (Spain) and I would like to install WM 6.1 on it. Orange does not provide with WM 6.1 and I found on the internet that there is a Sprint version of it, so I decided to install it. I get "Error 270" it says the image is corrupt. I tried to make an splxploit-windows and nothing happens... I took a screenshot (attached file) of what I get... and it stays there. Nothing happens at all.
I tried to install other versions also... HTC Magician and others just to see what happens and always I get "Error 270". The only one I could install successfuly is the Orange Rom
I tried everything and can´t find a solution. Any help there please?
Thanks a lot! =)
PD: I am using Windows XP, ActiveSync 4.5 and in SPLXPLOIT-WINDOWS I am following this steps (I get stuck in step 4)
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM
Any ideas?
This is not a complaint... this is just how I feel::
It is really frustrating to post something for 1st time in a forum looking for an answer and not to get anything in three days.
Welcome to forums
Have a deep read on Wiki here
Also visit Vouge section.
Read, Search, Respect and Enjoy!

Categories

Resources