Slow wifi speed with custom rom's on wizard - 8125, K-JAM, P4300, MDA Vario ROM Development

Hello , maybe someone had my problem before, but i didn't find it ..
So , my problem is that i have very slow wifi connection only with custom rom's , i tryed TNT rom's, X2H's rom's , CR96 rom's , and all have the same 'behavior' ---20-25 kb/s downloading speed , without any settings changes made from me , after a fresh rom install ... i thought that is how it must be on my wizard , i thought thats the wizard ..
But yesterday i put a wm6 standard rom on my wizard (from X2H's topic , down somewhere in the page it's a link with official wm6 rom for wizard) , and when i connected to my wifi , i was browsing and downloading with the real speed of my connection 200 kb/s , IE and opera were much faster than before ..
Can someone tell me something about this strange wifi behavior wits custom ROMs ? ?
ty very much

Related

Prophet AKU2.3 PDAMobiz ROM / MMS Composer

Hello,
i have installed the PDAMobiz 16 MB PagingPool Edition ROM. It is very great and fast but in Messaging are no MMS Options avaibel. I have tested a new installation of the rom, install the 12 MB Version ROM and install an other MP_Shortcut_MMS...cab but nothing help.
Can someone help me?
When i search on the storage for files with mms include in the name i find three files:
1 Windows\Help\MMS Composer.lnk
2 Windows\MMS Composer.htm
3 Windows\MMS Composer.lnk
When i open the third file i became an error:
The file ´MMS´ cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
Here are so much peaplo who use this PDAMobiz ROM´s, are all these dont use MMS? I have now searched two days for finding an answer for this problem and hope someone have an answer for me.
Very much thanks, Frank.
Your problem is really extrange, I download the last Dopod ROM aku2.3, 3 times and always I can see the MMS setings. ¿?
My problem; also very extrange, I tryed more than 10 times to instal the 2.15.0001 ROM and I can't, It CID unlock and so on. I'm going to be cracy.
Did you tryed to dwnload the ROM again? I mean, made a HR and try to install again.
Zappalapap said:
Hello,
i have installed the PDAMobiz 16 MB PagingPool Edition ROM. It is very great and fast but in Messaging are no MMS Options avaibel
Click to expand...
Click to collapse
use cab :lol:
Hello,
very much thanks. I have tested it with some cabs but all from others ROM how would not work.
I will backup later and update the ROM and test it. THx
Oh yeah, very very much thx. Its working great i have tested it!
MMS settings missing
I also don't have anymore MMS settings, after upgrading to AKU2.3 PDAmobiz G4...
I tried everything- didnt help.
anyone has clue? btw. AKU2.3 is very very fast but not usable if MMS doesnt work :-(
Cheers

Installation help

I am trying to install nghianga's rom, but anytime the installation ends normal (seems to), but the S200 only ends up in bootloader mode and whatever I try, it doesn't change. I have read a few posts about this problem, but I did't find any solution.
I know that I am not an experienced Prophet user, but I would like to have some installation help with this. Also I can't find the NB_Update_nghianga rom, maybe it works better with this one.
thx
The same for me.... please can help us?
You MUST downgrade to a relevant v2.2 ROM first, then upgrade
JD
Sorry JD, I tried this too, no success!
Maybe try going back to a 2.2 and try then to install smart1's Excellent clean rom and see if this works, then think about the other rom?
JD
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Don't forget this is a WM6 file, there will be a lot of programs that do not run correctly, this is not a problem of the rom, but more a problem of the software you are trying to install. Try to play with the ROM clean after a hard reset and install a little at a time
HTH
JD
eddyve said:
Thanks JD. I managed to install smart1 clean rom, bt this has some problems for me. I posted a message a few minutes ago in the large wm6 thread.
This is my post:
I installed this rom, since it is the only wm6 rom that I can install. I installed this rom starting from a factory released 2.20 rom. Here are a few problems.
1) error message that timewizard.exe can't be started, i csan't find any relation pointing to this app
2) IRDA (infrared) does not work, same problem as in the aku 3.3.b1 jesterz rom
3) Photocontacts pro does not work properly
4) I can add my BT headset, bt it doesn;t work with my phone
5) SMS backp doesn't work ( also not in aku 3.3 b1)
6) a number of other apps don't work (calendar+ for instance).
7) Sync with outlook doesn't work, even more after my first try to sync, all contacts, phone history and speed dial gone!
Do we have to wait for a better rom or has anyone found soltions?
Click to expand...
Click to collapse
Hi JD, I nderstand the WM6 issue, but a number of problems are really bgging me:
1) sync doesn't work and even more erased everything on my device
2) IR does not work, I bought a Prophet to se IR
3) when I tried to add a number in speed dial I receive a message that there is not enough memory available!
4) etc.
thx anyway for your response

Arabizer Problem

EDITED
just found anoher thread about it soz, pls mod remove this
ahassouna said:
Hi all:
i've been playing around with some ROMS lately; some of us do use the arabizer application which enables you to read and write arabic language and also installs some other minor arabic programs on your device.
i have noticed some issues with some ROMS and need help in solving them, here are my observations:
Diamond Roms till V8 work with arabizer, but ofcourse the keyboard issue doesn't allow you to use the arabic keyboard and you need to install the IM default cab to get it to work.
Death Roms till v4.1 do not work at all; you just get install unsuccessfull even before it starts to install on first block, tried:
1- install from fresh upgrade didn't work
2- install from hard reset did not work.
3- installed net cf 2 and chose as default, did not work
4- installed net cf 3.5 on cf 2 and chose 3.5 as default did not work
5- tried on another handset still doesn't work
6- tried intsall on SD card
iat first i thought it was framework issue but i think it's not, it has to be something in the core which i know nothing about.
tried the ryV5 rom also has the same problem as death roms and would not install.
Can anyone help find a solution to this please as it would be great to get it to work on death and ryV5 roms and should be intresting to know why such application would not work, it might help in near future for other applications.
note: i chose to make a thread about this as i cannot post same question in each ROM thread
Regards,
Hasso
Click to expand...
Click to collapse
I have installed In4mobility software on all of the cooked 6.1 ROMs and it is running fine. The only issue I have is it always defaults to Arabic Keyboard, even when in same session but switching between programs. Other than that it is running great. I would install on Main Mem,,,,, avoid installing on SD card, it will become buggy, and might cause freezing.
Do a search for Informobility software. It is not that expensive.
asfoor said:
I have installed In4mobility software on all of the cooked 6.1 ROMs and it is running fine. The only issue I have is it always defaults to Arabic Keyboard, even when in same session but switching between programs. Other than that it is running great. I would install on Main Mem,,,,, avoid installing on SD card, it will become buggy, and might cause freezing.
Do a search for Informobility software. It is not that expensive.
Click to expand...
Click to collapse
i know it works but not the keyboard, and it crashes the device n regular bases and makes it really slow
imaginet arabizer is always the best choice

[HTC Wizard][ROM][WM6.1][WWE/PLK] H3r5 - final version!

H3r5
final version
Description:
Windows Mobile 6.1 (AKU 1.6.1) WWE and PLK
PagePool: 5,25 MB (3,5 MB is recommended, speed is similar, larger RAM).
Release date: 7/12/2010
Useful applications, without TouchFlo2D and HTC Home
G3 and G4 safe
Recommended RadioROM 2.61.11!
Screenshots:
[ 1 2 3 4 ]
Download
pass: Ham3r
________________________________________
Clean
final version
Description:
Windows Mobile 6.1 (AKU 1.6.1) WWE and PLK
PagePool: 5,25 MB (3,5 MB is recommended, speed is similar, larger RAM).
Release date: 8/17/2010
Clean
G3 and G4 safe
Recommended RadioROM 2.61.11!
Screenshots:
[ 1 2 3 ]
Download
pass: Ham3r
thanks H3r5
Hi Ham3r
What are the main changes comparing to H3R4?
speedy9 said:
Hi Ham3r
What are the main changes comparing to H3R4?
Click to expand...
Click to collapse
Unlocked Exteneded ROM, small fixes, larger RAM and other..
rom is good
but in your wwe version :-
-starts slow (may be)
-wifi is not working
i mean that when i tap from comm manager or even from setting section it does not starts !!!
any patch for it ? or solution?
I had the same problem here with WWE : wifi was not working. (solved see below)
I made it working only one time after a hard reset...
Then I reflashed radio with 2.61 :
http://rs223tg.rapidshare.com/files/155922498/3325703/Radios.rar
now wifi seems ok again, after reboot and shutdown.
I cross fingers !!!
And boot time is incredibly fast ...
Whats the password for the (Radios) rar
Dzięki za rom / Thanks for ROM
ps. pass for radios: xda
eljuggy said:
I had the same problem here with WWE : wifi was not working. (solved see below)
I made it working only one time after a hard reset...
Then I reflashed radio with 2.61 :
http://rs223tg.rapidshare.com/files/155922498/3325703/Radios.rar
now wifi seems ok again, after reboot and shutdown.
I cross fingers !!!
And boot time is incredibly fast ...
Click to expand...
Click to collapse
I repeat, recommended is 2.61 radio and 2.26 SPL
After testing final versions, i think: both versions aren't similar. So i release soon fixed versions.
These differences are very small, but it's very imporant for me. Old versions are stay good.
//EDIT: fixed versions are uploaded.
Ham3r said:
I repeat, recommended is 2.61 radio and 2.26 SPL
Click to expand...
Click to collapse
I use 2.69.11 radio and have never had trouble with WIFI or anything else on your ROMs. I want to keep mentioning CRACING's ROM in my signature because it is the best Wizard 6.5 ROM so far, but the fact is that I use your H3r5 final ROM on both of my phones now.
When I get bored I change the today screen.
HTC Home is simple, fast, reliable.
SPB Mobile Shell is more like Android, and I like it sometimes.
Manila2D 2 build 1919 (with weather updates on the flip clock like HTC Sense) is beautiful and actually runs well with this ROM.
But I get bored, as I said, and keep switching between them.
n2rjt said:
But I get bored, as I said, and keep switching between them.
Click to expand...
Click to collapse
Thanks for info about RadioROM.
n2rjt, in my opinion, the best is Manila2D v2 (looks nice, but runs slowly) and HomeScreen++ UI (very customizable interface, very light, o/c and other..)
Do you can post link to (for?) working Manila with weather on Home Tab?
I used a folder that I had downloaded in October 2009. I had named the folder "M2D wm6.5". Looking through my old posts, it looks like I got it from here, following a response to my question which was here.
With your ROM, I have just installed the "first" and "second" folders, and the geolocation weather worked beautifully, both from WIFI and cell towers. I installed all of these to internal memory. I think that earlier ROMs I had tried such as the MSD ROM lacked sufficient internal memory to install all of these.
The weather on the home tab worked without requiring a workaround. I was surprised but happy.
Hi, I just flashed your rom and the first time wifi worked but after that I can't make it work again. Wifi just won't start from communication manager. I have radio 2.61.11, I reflashed the same radio and it still doesn't work. I have a G4 wizard if that counts. How can I fix this?
Hi Ham3r,
I want to upgrade my Cingular 8125 unlocked to WM 6.1. Please can u tell me which rom should i use?
Regards
Pankaj
Testing...
Hi, I've just downloaded your rom and installing it
later I will tell you how did it work.
after 1 hard reset I made wifi work
up to now very fast rom
thanks!
Uploaded Clean ROMs based on H3r5, for users who don't like added programs
Flashed your HTC_Wizard_6.1_21042_WWE_Clean_by_Ham3r.zip today. works great, fast enough on boot, wifi also works. the only thing is that the comm manager placed in both programs and Settings->connections.
oh, and how use voice dial in here? cant find the option...
Everything else is ok, this is my favourite wm at this time )
Comm Manager is in connections and in programs. It's normal and good (you can set commmgr to any button). In pure WM commmgr is just in settings.
VoiceDial is deleted, there just standard WM apps (+ MMS, Java, Network Wizard and smartskeys). You can install whatever you like (VoiceDial or VoiceCommander). Of course, UC is included.
btw. i fixed my SD slot in Wizard!

[Q] No DATA on latest Energie Rom

First i will thank you all for the wonderful Forum...
And the Second ...sorry for my bad English --- it is easyer to have sex for me as to speak english
Ok, about my Problem :
After install the very Great Energie Rom (thank you NRGZ28 )with the newest Runnymede ( 12.09.2011 ) i have no Data Connection..
I Have a 8Gig SDCard with an EXT4 1Gig Partition (8/230/10) , using CLK... everything works Perfectly, but i have no Data Connection.
Reinstalled the RCMix 3d Kernel ..fresh install Rom... Wiping SDCard and SDEXT / Fresh install ...and , and, and..
All tries attemps the same Result : No Data Internet Connection...
Any Idea to solve the Problem ?
I really like this Rom and i will use it on clk....
thx xdro...
RE.: Latest Energie Rom for HD2
Same problem on Energie Rom Take2 ( Runny Sensation XL ), as bevor...
No Data ( Internet ) Connection... and for the first SetUp ( it stucks on the first boot ), i must Restart my HD...
Sorry NRG28 this is the fastest Rom i had on my HD2 but without Data Connect, not a choice...
But all other things works perfectly...thank you very much...
greetz xdro
same problem works now thanks

Categories

Resources