Related
hi all.
I am in serious trouble and i need help. i realized i did not have outlook, thus my contacts are all gone.
I had tried to update my software earlier by installing some .cab file. It was a file for my HTC home. The installation was 'successful', however after i did a reset ( they prompt me to ) i could not boot up my phone. It get hanged once it got to my wallpaper, and i cant tap or press anything. The htc home screen also does not come out.
=(
any kind souls?
So something is hanging right after windows boots... did you try to install HTC Home to a storage card? Try booting with the storage card out.
thanks for the prompt reply. i tried, however it never seems to work. I am using a HTC TYTN ii. running on windows 6.1
I did install it on a storage card. i tried means like switching on without memory card, sim card and did a million resets, but it doesnt seem to work.. =(
Actually i install the HTC Home was because the message counter on the HTC Home got screwed up. it showed 1 unread no although i had all messages read. but anyway, for now, tht's not my main concern.. =(
thanks all in advance ..
I guess I do not understand all of your issues besides the freezing at boot.
A hard reset should be an option, if you're ok with that... and then for the future, use sprite and pim backup to make sure you don't lose too much data.
Try searching the forum for threads like http://forum.xda-developers.com/showthread.php?t=320689
What caused you to lose your contacts?
my contacts are all saved in the phone, and it wasnt back up cause i am not using microsoft outlook.. and lets say i want to do a hard reset, how to do it?
and how do i do a soft reset with my phone.
Is there anyway that i can actually do a SAFE mode boot up? but my phone keeps getting hanged at start up. i dunno if its because it cant bring up a pin enter mode where I need to key in my pin each time i boot up.
0) What version of ROM were you using?
HTC TYTN ii
1) Applications installed when it happened
HTC HOME (old version ) i d/led and used HTC Diamond home, then it got screwed up cause the unread messages kept showing 1, although all messages were read. i thus wanted to reinstall the HTC home.
2) Radio ROM version (2.19.21, 2.47.21, etc...)
NONE
3) Device model (dopod 818, imate etc...)
HTC TYTN II
4) Device version (G3 or G4)
Windows 6.1?
5) How long it was since last hard reset (1 day,6 hours, etc..)
I never did a hard reset. how do i do it
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
Soft refers to poking the reset button, would be more than 20 times after this issue
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
more than 10 times.
8) any other significant info you think will help:
My contacts are not saved syn with my com as i do not have windows outlook.
9) Do you have the HTC Homeplug today plugin enabled?
10) have you populated your PIM apps via pimbackup or via activesync?
11) Do you have the "HTC_default" today theme enabled?
yes.
for now, i cant boot up. the screen will hang at my wallpaper. i cant seem to press or click anything after that. My pin start up prompt does not apear too. please help =(
depressed ivy.
Sorry, but I'm pretty sure you need an app to use safe mode. You might need to loose your contacts, but don't give up... research and you might find an answer.
http://wiki.xda-developers.com/index.php?pagename=The%20Safe%20Mode%20Bible
And if you've already tried booting without a sim and storage card, you might need to hard reset, which is easy enough after reading the wiki.
e.g. press both softkeys while resetting, or you could even flash a new rom via sd card by naming the .nbh file KAISIMG.nbh and putting it on your storage card root directory.
Read the wiki before you make any decisions and good luck, good news is your phone sounds like it's fine, just install a safe mode program next time.
Hi. I did research like wht you adviced, i managed to log into bootloader mode, i downloaded MTTY program and got my phone to the USB mode. I like to ask the following:
1) can i retrieve and save my contacts as i saved them all in my phone and none in my sim card?
2) Wht can i do next as I'm badly stuck at the HTC home page with only my wallpaper, i cant click on any buttons.
Thanks in advance to all.
I really hope that some GURUs here are able to help solve my terrible situation and i would really appreciate it. My contacts are all save in the phone and i need some help in retrieving it.
Thanks all.
asdfgh123 said:
I really hope that some GURUs here are able to help solve my terrible situation and i would really appreciate it. My contacts are all save in the phone and i need some help in retrieving it.
Thanks all.
Click to expand...
Click to collapse
At what exactly point does it freeze?
What is your radio version, it should appear after you turn on the device in red letters on the bottom right.
What is your SPL Version, you should be able to see it from the bootloader?
Dave
Hello friend. When I suggested research, I meant things like this...
http://forum.xda-developers.com/showthread.php?p=2732337
I found this thread by clicking search in the top right to use google, and typed "save contacts" which if you've gone into MTTY research (be careful by the way) then you might be able to backup your data.
MY SPL : 3.29.0000
MY radio: 1.65.16.25
When i boot up, i suppose to have some password protect, to enter my pin before there is reception and stuff. For now, I can only see my wallpaper, the start button, contacts and calander buttons.However i cant touch on anything, it just simply hangs there.
SIM card and memory card are off. I tried SYNC, but it says cannot detect device.
=((
asdfgh123 said:
MY SPL : 3.29.0000
MY radio: 1.65.16.25
When i boot up, i suppose to have some password protect, to enter my pin before there is reception and stuff. For now, I can only see my wallpaper, the start button, contacts and calander buttons.However i cant touch on anything, it just simply hangs there.
SIM card and memory card are off. I tried SYNC, but it says cannot detect device.
=((
Click to expand...
Click to collapse
By "SYNC" you mean active sync? Try an Actice sync re-install, maybe?
Sounds like this protect stuff is beggared.
Ta
Dave
i meant active sync, it says it cant detect my device. Is there anyway from MTTY, i cant retrieve my contacts?
All this actually happen after i installed .cab file the other day, and the installation was fine and i was prompt to restart. It hanged after that till date. sigh =( I'm desperate.
GURUs,
I cant get my device to go any further than hanging right at the wallpaper of HTC Home, the usb doenst recognize my device, so i cant enter or do any thing.
I just wish to retrieve my contacts now, and do a hard reset on my phone.
Thanks.
If you never saved your contacts from and to your sim card without any kind of backup from outlook or pim, etc. you might be ****e out of luck. Gone from a ****ty samsung to a equally ****ty razr, hermes, and now kaiser with the same sim...Always copy your contacts to the sim; or at least a Backup folder on your desktop or lap. flashing erases the main memory, which of course includes contacts. That's why we have a program called sim manager, to backup contacts everytime we erase our systems. Hope you find a workaround though, as a former Iphone owner, reinputting your contacts is a giant *****
sigh.. does tht means i'm so dead now? I did ever did a PPCPimBackup, but its stored in the phone memory too? any sort of help you can assist?
asdfgh123 said:
sigh.. does tht means i'm so dead now? I did ever did a PPCPimBackup, but its stored in the phone memory too? any sort of help you can assist?
Click to expand...
Click to collapse
Possibly, I've tried to get hold of someone who might know, but it's looking grim.
Storage Card backups and Active Sync are the best way to backup.
*DaveShaw closes barn door after the horse has bolted *
Ta
DAve
I have an 8125 laying around that I'd like to turn into a ZuneHD type device..
No phone, no text message, no mms, no email, etc..
Keep WiFi, PIE, games, media player, etc..
Is there a good ROM of choice for this?
Thanks
-Matthew
Here, try this one:
http://forum.xda-developers.com/showthread.php?t=501941
When I try to flash a rom:
when the phone resets to get to the 3-color boot screen, my computer loses sync with it and the RUU program locks up.. How do you keep your computer connected so it doesn't think it has been unplugged?
Even though it is still plugged in and I see USB over the left softkey, when I restart RUU, it then locks up when it is trying to scan my phone (it doesn't see it I guess)..
I'm on Vista Ultimate 64..
How do I get around this?
Thanks
-Matthew
I finally just pulled out my old XP machine from the attic.. Much quicker, nothing in Vista worked..
However, even after the RUU ran, the phone booted right back into the old OS..
?
EDIT: got it!
Now to put that 4G miniSD card in and fill it with tunes..
Is there a way to totally disable the phone functions altogether? Right now it boots into the dialer saying 'no SIM card'.. I would rather have it go straight to the WM6.5 today screen..
-Matthew
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
JaimeZX said:
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
Click to expand...
Click to collapse
Interesting problem. I have bricked my phone a bunch of times and have always been able to get back to at least "download Mode". The method I use to go to "Download Mode" is With the usb cable plugged into the computer only, power off the phone. If phone wont power off, or stay powered off, pull battery, then put battery back in. Now hold vol down and vol up buttons only, keep holding these buttons as you plug the usb cable into the phone. In 3 seconds the download screen should appear. I hope this helps you get your phone back.
JaimeZX said:
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
Click to expand...
Click to collapse
This sounds like a time where a jig would be helpful. Any chance you can have your wife order one, and send to you? http://www.youtube.com/watch?v=D7I4dFX_iJ4
This should put you straight into download mode, and you can then flash.
Thanks, guys. I continued fiddling and got the phone into DL mode.
I also noted that when plugging and unplugging the phone, it would show up in zadig as "unknown device."
I tried to load the drivers on that, but (a) it still shows up as "unknown device" and (b) when I run HOC it doesn't see the phone under the list of compatible devices.
So.... still kind of stuck.
Any more ideas?
Oop. duplicate post
It's been awhile since I've played with the one clicks, but, "serial gadget" is what I remember seeing when I used them.
Right. MORE messing around later and "Serial Gadget" is it.
That said, I still think I have a driver issue. I have tried uninstalling and reinstalling the zadig-recommended drivers for Serial Gadget several times. I also tried manually installing the drivers from Super One Click.
Anyway, now when I load up HOC I get the green <<connected>> at bottom; but then sometimes it wants me to install the drivers (again) and sometimes it gets past that part, but then goes to
Flashing Kernel: 0%
...hangs there for about 10 seconds and then
Failed!
So... driver thing you think?
Thanks again,
If you reboot the phone after the 0% hanging for 10 seconds, does it go to the yellow exclamation mark screen? If so, just reflash again and you should be back to working... both my and my wife's phone always did that when I had to flash a kernel.
That's just another download screen that theraze is describing.
Exacatly. But the alternate download screen always came up after restarting the phone after a 'failed' flash where it stayed at 0% where it was successfully communicating through the cable. That just meant to not break the drivers or unplug anything... just reboot fast and finish up quickly.
Okay - I can definitely try that! It had not occurred to me to try and reboot the phone right then.
Question, though - when I get the "Failed!" Then HOC essentially hangs, when it says something along the lines of "ending session..." and never progresses from there. So how do you "restart quickly?" Because I have to like, close and reopen HOC. I guess I will see if it succeeds at ending the session when I reboot.
I will try it again. Strange though, sometimes HOC accepts the existing driver (I managed to DL the Samsung driver installer) and sometimes it wants to reinstall "WinUSB." does that make sense? Is the WinUSB an acceptable one?
The winusb is the right driver for heimdall, it doesn't like the Samsung driver.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Samsung drivers and the one click drivers clash. Yes, uninstall Samsung completely if you want to use the one click.
Hm. Thanks for that - might be part of the problem.
Dunno what I did differently, if anything, but last night I tried flashing again and this time it went through! I was very glad to see the whole HOC process completed successfully!
So anyway - thanks so much for the help, guys.
Hi! Yup, I'm a noob, I'm only rooting my phone to attempt to recover lost files, I was on vacation last week and my LG G3 did a factory reset in my pocket, I guess I kept pocket entering numbers into my PIN lock screen and after 10 attempts it did a full reset, and I lost all my pictures, videos, and contacts. What a ****ed up feature!
Anyways, I downloaded LG One Click Root, everything went fine, until my phone restarts into download mode and it stays stuck at 0% on the Firmware Update screen. Then I check the command prompt on my PC and it shows a #FAIL message. Why? I did everything right, have the drivers, tried MTP and PTP, tried a different USB port...nothing. I included a pic:
Really appreciative of any help, I tried to search the forum and came up with nothing.
EDIT: Ok I guess I can't include a pic
falcove said:
Hi! Yup, I'm a noob, I'm only rooting my phone to attempt to recover lost files, I was on vacation last week and my LG G3 did a factory reset in my pocket, I guess I kept pocket entering numbers into my PIN lock screen and after 10 attempts it did a full reset, and I lost all my pictures, videos, and contacts. What a ****ed up feature!
Anyways, I downloaded LG One Click Root, everything went fine, until my phone restarts into download mode and it stays stuck at 0% on the Firmware Update screen. Then I check the command prompt on my PC and it shows a #FAIL message. Why? I did everything right, have the drivers, tried MTP and PTP, tried a different USB port...nothing. I included a pic:
Really appreciative of any help, I tried to search the forum and came up with nothing.
EDIT: Ok I guess I can't include a pic
Click to expand...
Click to collapse
You probably won't recover them, deleted files, and pics are possible to recover but the factory reset feature formats the partitions and, typically, data can't be recovered after formatting. That's is the point of the feature in the first place, to protect the owner's personal information if the device is stolen, if it could easily be recovered then there would be no point in having the feature in the first place.
It's one of those "user beware" situations. Using a PIN and putting the device in your pocket wasn't a good idea in the first place, no offense intended, just a fact.
Sent from my SM-S903VL using Tapatalk
Out of nowhere my S6 stopped working. Each time I restart my phone it gets stuck on the "LTE Plus" screen. I need to figure out a way to retrieve my pictures/videos. I didn't back them up. I checked my Samsung, Google, and One Drive accounts. Below is a list of things I can still do on my phone and things I've attempted. Let me know if you have any ideas.
1. I can soft restart my phone
2. I can restart it into download and bootloader mode
3. I can not start it up in safe mode
4. I wiped cache partition
5. I can connect it to my laptop via USB but it only shows as a bluetooth device. It does not show any options to open up files. The phone was not debugged prior to the phone breaking.
6. I've tried trial versions of Fone Lab and 2-3 other similar programs. Each time with no luck.
Would love to hear your thoughts or ideas. I really don't want to lose these pictures/videos. Thanks!