Hi All
Can someone please help me out as I have searched the forum but just can't seem to find the answer.
I did a hard SPL for G4 (prophet) I confirmed that it was a G4 before doing this and flashed a new rom, since then no matter what rom I flash (shipped or cooked) I can not get the screen to settle. It seems okay in the bootloader and the splash screen but as soon as the OS kicks in the screen moves from left to right and flickers. It also takes me a couple of attempts to get the rom to load.
The screen was swapped for a known good one, but no success and the MB has been confirmed as good.
Any suggestions would be greatly appreciated.
Related
Just bought an SP5 off ebay, it worls ok for a bit then freezes completely with a white screen, only a hard reset will get it back, it has the latest imate wwe rom anyone experienced the same or know what could be wrong
Thanks
Chris
hi,
I am sorry if this topic has already been discussed but I couldnt find any previous discussion so I would appreciate it if there is an answer already available perhaps someone could direct me to it.
I was using WM6 on my Jasjar and my device was running properly. I however, accidently broke the LCD and after checking out the price of a repair decided it would be cheaper to just buy another phone. So after about a Month, I sold my device in its same condition (i.e. with the broken LCD). Now before I handed it over, I performed a hard reset using the procedure that we are all so familiar with, however I didnt get the famous chime when your device is ready for screen alignment etc.
I handed my device to the guy and the next day after replacing the screen he called me and informed me that device boot is not progressing beyond the imate splash screen. He told me that he went into bootloader mode and installed some older roms from imate and still there has been no progress. I went yesterday to him and reinstalled the WM6 rom version that I had and the same problem persist after two upgrade.
I am positive my device was working when the LCD broke and even before I hard reset it... Any help in this matter would be highly appreciated.
Thanks.
Ahmed
Hi there I discovered this problem while trying to update my Qtek S200, when I switch off the power on it... and try to turn it back on all I get is the screen and LEDs flash periodically. However when I plug it into the wall charger it turns on just fine as soon as the charging like comes on. As you can imagine this makes updating it quite difficult. So any help anyone can provide would be much appreciated.
Zac from Australia
Tell more ... what have you done?
Flash new Firmware? What Firmware have you use ... do you know the different betwen G3 or G4 S200?
No idea about the difference between the G3 and G4 S200's mate. I bought the phone off ebay and it seems to be running A dopod rom from pdamobiz.com which made me suspect about it playing up.
Can anyone help me at all?
My T-Mobile MDA US G3 IPL/SPL 2.26 running Faria's PRO ROM kitchen keeps having a problem where my screen turns completely white at random times and does not go away until i slide the keyboard slightly out. This has been happening when i was on Core 2.0 and now Faria's ROM and even when i downgraded to the T-Mobile 2.26 ROM when switching from Core to Faria it happened. Is there any way to fix this, please someone help me I cant stand not being able to use my phone as my screen keeps on turning white unless i have the keyboard slid out slightly. If it is slid out all the way it will keep turning white and if is not slid out at all my screen will keep turning white. It gets really annoying when you are trying to type something and the screen turns white and you have to slide they keyboard back in and out. If there is anyone who has some sort of idea on how to fix this or a fix to it please tell me!!
try other WM6.0 roms to get more feedback, maybe it is because your device unlocked!!!
Well it still happened in the short time i had the T-Mobile 2.26 ROM so i dont think switching to another WM6 will work.
Hello guys,
My XDA Orbit 2 suffers from a malfunction on its start up, it loads with a white screen, I can not see the normal boot up screens. I have to wait until the green light flashes then tap the power button to put phone into standby then bring it back out again..
I was looking to flash the rom back to original state but I have no idea where to start..tried to do HardSPL but fails due as when it goes out of WM6 screen I can not see what it is doing..
Someone please help...
More Informations needed
Hi djmetsandy!
Please tell us which ROM u actually have. When flashed any cooked ROM before you only need to connect the phone via USB and flash the new one (or original).
More when u post more infos.
So far
Frank
I have the same problem after Hard-SPL except I can barely see the phone is booting. Any help will be greatly appericate. Thanks
Mine does it too!!! please help!
First I would like to specify that I am a Noob so please be patient with me!
I bought my XDA O2 Orbit 2 ridiculously cheap at my local cash converters "unlocked" according to their advertisement. When I bought it, it already had this white screen on boot but everything else worked so I bought it thinking that I would be able to fix it somehow. I have since upgraded it to the official O2 WWE 6.1 rom. I would like to put HardSPL on it and use cooked roms but obviously without being able to see the bootloader I can't do the HardSPL. Every now and then it will show the bootscreen properly and if I go to the device info app in settings all the radio numbers and everything is fine (no corrupted numbers). What is mtty, where can I download it, and will I be able to use this to fix it and how?
Any help would be great as I really do like this phone it's just an annoying little problem.
For reference here is the device info:
rom version: 3.13.206.0 WWE
rom date: 09/01/08
radio version: 1.59.42.15
protocol version: 25.85.30.07H
Please help me because my phone is not covered under warranty as I bought it secondhand.
I've fixed my white screen, not that I knew it was going to fix it.
I cracked the LCD of my phone at work, so I decided to fix it. In the process of swapping the LCD my white screen problem has gone.
I can't say exactly why it fixed it but I did notice that my original LCD had rounded corners and the new one has square corners. I suspect either a bad batch of screens or a bad connection.
I would like to point out that taking the phone apart will void your warranty and potentially damage it if you don't know what you're doing.
Not sure if this will be the fix for your problem but it worked for me.