Hi, need help here, currently i'm using varanusvincent sprint manila rom for quite sometimes and i flashed using dioxda2 lazy tool as i've tried to hardspl but never change to 2.G4.4PDA..however last few days i've tried to flash again for new w6.5 and also wapvirus touchflo 3d, the result was error, tried again and again still the error message come up.. can someone help me on this..
Related
Hi,
i have O2 Exec,
flashed this version of WM6
Jwrightmcps Crossbow ROM Update 2.12.06 WWE
http://forum.xda-developers.com/showthread.php?t=343736
it works ok, but doesn't see my 8Gb SDHC card (actually i see only 3,8GB)
I tried to flash another roms, but my uni is not booting after install. Only this one (Jwrightmcps Crossbow ROM Update 2.12.06 WWE) is working. When i try to boot my phone O2 logo is displaying and thats it.
Question: is it enough to download and install new rom, or i need to install somethink else? I tried also to install 6.1 rom, but it doesnt boot my phone also.
If i need to install somethink else, can you add link also
Thanks for help.
I have one idea what i did wrong.
When i flashed new rom i started it ehat windows was launched (not from bootloader). Is it possible that this way i break my radio and after that my new rom won't start?
i looked wiki, but i didn't get answer
Thank you for not anwering
Still have same problem
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
I'm trying to create a factory standard HTC three uk rom as there doesn't appear to be one already cooked. I followed the wiki guides to dump and cook my rom. However when flashing it always fails at 25% any ideas? i have re-tried cooking and flashing several times, still same error.
info
The rom is wm6.0 and radio 1.27.15.32
before flashing i successfully flashed my device with L26's new throttle rom (beta 6)
Do you get an error message when it fails?
Thanks
Dave
sorry for the late reply i re-flashed tonight as i could not remember error, its error 262 "the rom update utility encountered communication errors during the update process"
Sorry to ask but, have you installed Hard SPL yet?
Dave
yes i ran hard spl version 1 before flashing, i have sucessfully flashed other roms just not the one i cooked
Its been a while since i last flashed to L26_WM6.1_PROV4_(3.51.502.0_WWE) My_Favorit
I decided to try an new ROM, but any one i try i get an error half was through the process. Error 302. after much playing around, the only ROM that i manage to flash is my old L26 ROM.
I searched for similar issues but nothing came up. does any one have an idea where i may be going wrong? I have Hard SPL 3.28 installed
Hello,
First my question :
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Then the context:
I'm a newbie and 2 days ago I've tried to upgrade my I-Mate K-Jam to WM6.1.
After having carrefully read several thread and in particular the thread "Wizard Windows Mobile 6 for newbies" i first start to unlock my G4 mobile with HardSpl. This was a great success so I moved on to the next step loading a WM6 ROM. I choose the WizFlo 6.1.1.4 (http://forum.xda-developers.com/showthread.php?t=435228) but this was not a success since my K-Jam was just looping on the splash page/alignment wizard and reboot. I really thought that I had turned my mobile into a brick but was still continuing to investigate and yesterday evening I've learned how to just start the bootloader by pressing the camera button while starting-up. Yepee, 2 a clock this morning, I succeed loading the vanilla version of the TNT rom : http://forum.xda-developers.com/showthread.php?t=388229. Super everything was working fine so I went to bed.
This morning, very proud of what I've done alone I just decided to move from the TNT vanilla version to the professional version. This was a mistake since then I was never able to restart my K-Jam. It just freeze on the TNT splash screen. I've tried to reload several other rom but the TNT splash screen remains and my mobile just continue to freeze.
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Thanks in advance for your help
YES!
In order to revert back to official rom,you'll first have to remove HardSPL,otherwise it'll Brick the phone.
Secondly, have you tried a Hard Reset,it might help the phone to start working.Is your battery fully charged ?
After getting the phone HardSPL,there's no reason for any wm6 roms like TNT to stuck up,it might be that the battery is weak or flat.
Get the battery fully charged,try a Hard Reset,otherwise reflash TNT.
Thanks for your answer, I'm not sure about the batterie status. Am i able to refill the battery in bootload mode. or does the official K-jam charger work in my mobile is not yet started.
Almost a week I'm working on my mobile but no sucess yet.
One more question, Is there any special restart or reboot to be performed once the rom load process is complete ?
I've tried to install Loverom or merlin rom but even if the splash page change I never go furher. I'm now considering on moving back to an official ROM. But since I didn't backed up mu rom before all of these update process I'm gone use a download one.
K-JAM_WWE_216901_2169101_020710_ship.exe. This official package install a ROM file and the RUU utility, but how can I check that the rom does not contain IPL nor SPL file.
Is there a way to check rom content before a load. I'm using hardspl and I've read that if I instal a ROM with IPL/SPL i will turn my device into brick.
May be I should also remove hardspl but how can I do this ?
Solved !!
I just notice a format error when hard reset.
Google it and find his thread
http://forum.xda-developers.com/showthread.php?t=428312&highlight=format+error&page=3
Fixed yepeeee.
thanks to all for your help.
Good that you solved it finally, Happy Flashing