Hi all, I have been running into a little bit of a problem and I wondered if somebody might have an idea or could point me in the right direction. I'm usually fairly adept at using google search and searching XDA and other forums and finding what I need but I have run into an issue I can't seem to find much info for.
Using the PPC Kitchen interface I assembled a rom for my sisters Titan. I have done this many times on my own Apache with great success. I went through added the things I thought she needed and everything went off with out a hitch. I used the 6.5 base and built on that. Everything works great. Except...
There were some other things on my phone that she has asked me to put on her phone. So no big deal I can just make up something new for her and flash her phone again. The problem is with connecting via USB. Both windows XP pro and Vista Ultimate say "the usb device has malfunctioned" or "the usb device is not recognized" No matter what settings I try on the nuemassstorage popup it does not seem to want to connect. Always the same error. I'm not sure how to get past this step though because I cannot seem to connect.
Any diagnostic ideas or info would be greatly appreciated. I can post whatever other info may be needed as well that would help.
Thanks
Related
Hi, I have done the Unlock SuperCID to my Kaiser, using my XP based laptop, but now when I try to connect to my Vista Desktop it won't recognise it, it doesn't even bring the amber charge led on! although if I connect back on to Laptop it works and connects fine. Any ideas guys as I can't seem to find a thread or wiki which relates to this problem, although I have not posted I have been reading a lot of posts lately as I am trying to gain some knowledge and experience here. Not very tech savvy, but kinda know my way around.. but I was hoping I wouldn't have to post something like this.
Thanks.
Reppy
And to think I just "upgraded" my Vista machine to XP. In Device Center see if you can remove any partnerships. Also, Restart. ON your PDA go into ActiveSync and make sure that the Vista machine isn't listed in there. If there are two Remove the Vista one by going to Menu options. Also, Soft Reset.
Also, You might get more better help if you posted in the Kaiser Section
Also, Feel Free to Check out the Kaiser FAQ and G.W.E.N.I. links in my Signature.
I just traded my X1 for an x7510, but find many of the settings not reacting at all. It's apparently running a version of 6.5
USB to PC does nothing when clicked, along with various other settings such as Device Information and Format Microdrive.
I can't connect to my PC, so I can't even begin to sync or think about updating the ROM to something that might work again.
Does anyone have any useful tips how I could get this thing working again?
Go into bootloader, its camera button and reset. And it will work. Thats the whole points of a hard-spl...Make sure you have the correct drivers in windows.
...
Well, that's such an obvious solution I rightfully feel like a n00b now.
Thanks.
Hello people.
I recently reinstalled my Win7 and I wanted to connect it with my X1, but when I plugged the phone in for the first time, Windows started downloading some weird drivers (RNDIS?) instead just opening the device control panel thing. Now I'm pretty much stuck and can't connect my phone to my PC (I get the connection error sound every time), except for the disk mode.
I've serched for some answers here on xda as well as on the internet and all the fixes I found either don't work, are already applied or open up new problems for me.
Here's what I've tried already:
Rebooting PC countless times
Turning off the advanced network settings in usb to pc menu on X1,
Reinstalling WMDC countless times
Downloading some weird WMDC updates from microsoft download center
Configuring the registry (Enum key) - getting access denied error to everything I'm trying to do there
Opening the device manager in Windows - It's just blank.
About the software and ROM status, my X1 was just HR'd and I've installed just some basic stuff like the performance pack (Advanced Config + SKTools), MortScript and S2P.
I know that the problem here is rather related to PC, but I hope you guys still can help me, as I'm running out of ideas (and sanity).
Sorry for my english (not my native language), and please do help me if you can.
Same problem here.
So far I've been able to troubleshoot it a little.
First off RNDIS is the regular WinMo driver. So nothing weird there.
Secondly WMDC does work when you run the app as an administrator (on my end anyways). That is in no way a solution though... just a workaround.
I now need to pinpoint the part that needs the actual admin rights.
I'm going to keep on trying to find the answer and I hope more people will help.
Thanks for replying for my post.
Launching WMDC isn't the problem for me though. It starts up fine, it just doesn't connect with the phone.
Keeping fingers crossed for a solution, and thanks again.
I managed to get it started too now.
Again, as an administrator it runs all fine and dandy, but no sigar as a user.
So after I get it started no connection whatsoever. Still looking...
Got it!
Installed the drivers through SCCM at system deployment. Then WMDC installs perfectly.
It still wouldn't run though. And this was because of a policy which was enabled: WPD Device: deny read/write access
Enabling write access solved my problem.
hi henk!
I had the same problem.
I changed the policy, then win7 installed drivers for the xperia, it recognizes the phone, I'm able to navigate into the memory card...
But the wmdc don't see my xperia is connected, and if I try to transfer some music from win7 to my xperia, it's very slow(1b/s)!
Have you got any idea?
Had you the same slow speed?
Hello,
My Lumia 710 is not recognized by Zune, I've tried all possibilities that are in the forums and Microsoft ZUNE and still does not.
Help please
If you've literally tried "all the possibilities that are in the forums" I'm not sure why you expect we'll be able to help you, but...
Make sure you're using the original cable (not all USB cables work, it's stupid, and no, just because you bought it along with the phone doesn't count; use the one that came in the box).
Make sure your Zune software is up to date (it *should* prompt to install).
Make sure your PC has the WP7 drivers installed (if it doesn't, connect the phone then install the driver using Device Manager and searching Windows Update).
Try different USB ports.
Make sure the cable is firmly seated at both ends.
Give Zune a few seconds, I've seen it take up to ~15 seconds to detect the phone although it's normally almost instant.
Yusei said:
Hello,
My Lumia 710 is not recognized by Zune, I've tried all possibilities that are in the forums and Microsoft ZUNE and still does not.
Help please
Click to expand...
Click to collapse
Oh well, so it's not just me. I've literally tried everything in order to sync my GF's 710 but no way. Are you getting the "Can't Connect to Your Phone. Disconnect it, Restart it, Then Try Connecting Again" error message?
I tried this solution http://www.governor.co.uk/news-plus...ect-it,-restart-it,-then-try-connecting-again which apparently worked for many but it doesn't work for me: I haven't got anything under "Personal", and for the second part I cannot locate the folder C:\Users\<UserName>\AppData\Roaming\Microsoft\Crypto\RSA, the path isn't right for me.
Where can I find that stupid RSA folder? Any clue?
I'm really stuck here, apparently I'm getting this error on 2 laptops: my GF's one with Vista and mine with Win7. This is really annoying...
I've solved this problem, in my case, just run in compatibility mode with Windows Vista, and puff...Work fine now.
Thx for the answers
Yusei said:
I've solved this problem, in my case, just run in compatibility mode with Windows Vista, and puff...Work fine now.
Thx for the answers
Click to expand...
Click to collapse
Uh, that's interesting. I'll try this too tomorrow. Glad you fixed it
you possibly just ran into the leap day bug.
read details here
http://forum.xda-developers.com/showpost.php?p=23128029&postcount=1
in short, set the data to March 1 and you will be able to connect. then you can return to current date.
everything should be fine after the 29th.
Hi guys. Love this site but I am encountering some issues! I am having problems with the drivers (it appears), of my p990h. I am new to android (only had my device a week), and have duly thrown myself in the deep end to try and make the most from the device and have encountered some issues. I am in Colombia and bought the phone here. I ‘rooted’ the device using the ‘Super One Click’ method and had no issues. I then performed the fatory reset and installed the ‘Cm9.0.0-rco-p990-unofficial’ rom (build [email protected]). I didn’t experience issues up to this point. However (and i know i messed up here), i then flashed baseband version 1035.21_20110725 using smartflash. Big mistake as then the time on the phone changed all to European time, and now although the device can be read by my computer, it cannot connect to it and a yellow exclamation appears on the device in device manager. I have tried everyway to update this, but no joy. Tried reflashing with smartflash, but now nothing happens when the phone is connected (nothing appears in the ‘coms port’ box). If i use the lg tool, it doesn’t even list my p990 as a device whose drivers i can download.
So basically I would like to know if anyone can help me:
a) get the drivers working properly again so I can connect the device and update.
And
b) if anyone can get me the 1035.21_20110602 baseband files to go back to how it was previously. Have looked everywhere but no luck. I downloaded one, but i cant seem to find a way to use use it (it appears as a clockworkmod folder and macosx folder. I haven’t used them as i couldn’t figure out how!
May i need to re-root my device, could this be the issue? This had occurred to me that the superuser settings may have something to do with this.
I also want to be able to restore my phone to its stock settings as i really need my camera back up and going properly whilst here in Colombia.
I have spent the last week trawling these forums reading everyone’s posts and learning from you guys, so a big thanks out there to you all who have got me this far – many thanks. Seems like a great community and im looking forward to getting more involved, and learning about the murky waters of android (even though im having some difficulties i love it!) . I apologise for any poor wording and general noobiness that may cause any misunderstanding! I will try and answer any questions/replies i may get as accurately as possible.
I really hope someone can help me as I cant keep going in circles – i have a 12 hour bus ride tomorrow so gotta get it done.
Many thanks in you lovely people!
try flash a new rom CM7