So, got my self in a bit of trouble today, here's the situation:
- Recently flashed TPC v11 Mega Edition, and had been using it for about a week. Ran across some problems with apps freezing, so I decided I should try to start fresh and reflash a stock ROM.
- Reflashed AT&T Tilt stock ROM (3.57.502.2) via my SD card (my USB is not working, and hasn't in a while).
- Flash seemed like it was going great, but when the phone rebooted the TPC ROM was still there, yet it showed an older radio had been flashed (1.27.14.09)
- Knowing that this wasn't a good situation, I thought I'd try to reflash again via the USB. Began the process, except this time the flash process was now stuck at white "Loading..." screen.
- Thinking it was possibly a issue with my SD Card, I tried reformatting the card with FAT32 and recopying the KAISDIAG.nbh and ROM. Didn't work
- Tried copying a different ROM (TCP V11, a new RADIO, HardSPL 334... didn't work)
Unfortunately, since my USB doesn't work, I don't have an alternative way to flash the device. Surprisingling the TPC v11 ROM and the old RADIO seem to function somewhat, so the device is usable, although it seems as if I'm now stuck with this ROM for good. Also, audio seems not to function now... an unfortunately side effect. I can only assume this is related to the old Radio.
Any ideas as to why my flashing issue might be? ...thanks in advance.
Please consult STICKYs.
Several ways to get around this:
Put the phone into bootloader flash via SD or even computer as dosn't need to sync when in bootloader.
The issue you have with sound is that the stock ROM has a radio so therefore you now have an old radio.
To Flash via SD the ROM file name is KAISIMG.nbh.
Hope this helps any more problems please use a thread already available [Resources] Flashing Your First Kaiser Rom (For Noobs)
Thread closed.
Related
Current Setup :
HardSPL (latest, 3.56 I believe)
Radio: 1.65.29.22 (from Niki or Neon, almost positive it was Niki)
Solace v3.1
Decided I wanted to go back to newest radio, attempted to flash to it; hit a snag at about 78%. Progress didn't update for a while, then to 100%. Update app said there was a flash error, and it did not complete correctly. Device restarted, stuck at bootloader. Re-attempted the flash, same result.
Next, I tried flashing AT&T's latest ROM. Stalled at about 76%, message about having a communication error, walked through the apps troubleshooting steps; it tried (and failed) again.
Tried the latest HTC direct ROM, same result.
Tried to flash the latest HTC via MicroSD card, got 20(ish) percent through, the Radio line then went red and said "RSA Failure". Then that whole process died on me as well.
The only way I can get my device back up to run MTTY to remove the RUU flag. When issuing the "task 8" command to format, it instead reboots the phone. The phone will come up normally after that.
Since I got it back up, I have tried flashing once again, and am getting the same result. Am I just stuck here now?
It's not that I don't like this ROM, I'm just wanting to update the radio. Any ideas what else I might be able to try?
Try using the search function next time before you create a new thread.
If you would tryed you could find this post
Yes, thank you...except that I started my thread saying that the proposed solution was exactly what CAUSED the problem to begin with. I tried to flash to the 1.70.x radio, which is where I got the flash write error.
Anyone else?
Now that you can get it up normally, have you tried going to a stock HTC ROM first, then the new ROM, then the radio? Or HTC, radio, new ROM? I'd probably do it the second way. You said you tried flashing stock before getting it up again, and that you tried flashing after getting it back up, but you didn't state what you've tried flashing after getting it back up.
Since I've gotten it back up, I've tried both OEM and radio only. Both have the same result.
Really at a loss now as to what to try next.
Did you try the 3.29Hard2 SPL? I haven't encountered your issue and wish I could be mroe help here. My only thoughts would be to try a different SPL, or perhaps looking into the ForceUSB issue. Best of luck.
Hey Guys,
First off this is a re-post, me old thread was closed, I am sorry for reopening but I am still having this issue. DaveShaw and smokestack76 had posted. Dave thank you for your reply but I have been through the noob flash guide and many many many other threads and it does not resolve my issue.
I'm not new to flashing and roms, I have flashed at least 100 times and have done some cooking. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed fine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
I have tried flashing spl from the sd and yes spl image was KAISIMG.nbh and KAISDIAG.nbh was on there as well. Card is formatted fat32. HardSPL would start, read the file and get stuck on loading.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever it is released, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
I have the stock 6.1 att rom up right now but I would like to resolve the issue.
__________________
finally finally got the patched version of 3.29 flashed. I will let you guys know how it goes from here. I am on a different computer at work.
Success!
I started from complete scratch and a fresh brain and was able to get everything going.
After I got the os back up i was able to start jumpspl and get it to connect via usb. Then only the force usb on 3.29 patch would work. After that repaired active sync and I was ready to go. Thanks smokestack79 for the late night help last night. I was out of it and frustrated. Seems like she's got a little more life in her after all.
Phone stuck in cyclic restart after Radio ROM upgrade!
Hi all, I just loaded a new radio ROM (1.12.25.19) onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load (I have done several radio ROM upgrades without any bother)
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
Any ideas? Or do i now have a very expensive door wedge
Have you tried flashing again from SD? Maybe that will help.
Doug M.
Yup - I tried to flash from SD but all I get is a message saying "no image found" and then I stay in bootloader, it looks like it's not reading from the SD card properly. I reckon if I can get it to boot from the SD all will be well (I hope
Any ideas??
Are you using a cdma phone? Do you have a raphael?
Hi Farmer Ted - it's a GSM Raphael and not a CDMA phone, thats why i'm surprised the ROM flash failed!
Weird; all I can recommend is trying to flash a stock, shipped rom. Hope you get that sucker working again! What rom are you using? Does it have a newer rilphone in it? I'm just grasping at straws, but maybe if you you a 1.14 rilphone, it doesn't play nice with a 1.12 radio.
Farmer Ted said:
Weird; all I can recommend is trying to flash a stock, shipped rom. Hope you get that sucker working again! What rom are you using? Does it have a newer rilphone in it? I'm just grasping at straws, but maybe if you you a 1.14 rilphone, it doesn't play nice with a 1.12 radio.
Click to expand...
Click to collapse
Now you mention it I do have the 1.14 rilphone installed!! How do I get the damn thing to work again? a few people have mention trying to reflash the entire phone via SD, thanks! I think you may have found the problem - now all i need is the solution!
Can you get into bootloader? If so, just try flashing one of the stock roms (that has a radio with it) over the usb connection. If you can't do that, then do an sd card flash. 1 GB cards seem to work the best (that's what I use).
Farmer Ted said:
Can you get into bootloader? If so, just try flashing one of the stock roms (that has a radio with it) over the usb connection. If you can't do that, then do an sd card flash. 1 GB cards seem to work the best (that's what I use).
Click to expand...
Click to collapse
Farmer Ted - cracked it! For some reason the SD instal would not work (i tried all my cards incl a 1GB as suggested) and then tried the USB method - and it worked!! Have now got my phone back !!
I owe you a large cyber-beer !!
Awesome! Glad I didn't screw your phone up any worse, lol.
Hi there all, firstly, i have tried the search button and found nothing, i am having a little problem with everytime i soft reset or turn off my phone the rom re-installs and i have to go through importing sim contacts data setup etc all again.
It also deletes any apps i've installed and its getting me slightly miffed.
I am using 6.5 TPC V11 Mega WWE rom (however whatever rom i flash it does the same) radio 1.70.19.09 (again I have tried various radios) and various HardSPLs - currently using 3.29 i believe.
Is there something the matter with my internal memory maybe? i know sometimes whenh it reboots it tries to load into windows again but gets errors such as "bars.cab failed to install"
SO guys any ideas, i know it will probably be an easy fix!
Thankyou in advance
Paul
well this is the wrong place to have posted this but try this and see if it helps
1. try flashing via sd card and not usb cable, and vice versa.(see sticky to guide u thru sd card flash process
2. try flashing stock rom
see if that helps
If a problem with a ROM ask/report in ROM thread, the F.A.Q's at the start of threads cover the hard-reseting issues with 6.5 ROMs.
Thread closed.
Hi need a bit of help with this one if possible.
start the top..
went to flash leedroids rom..flashed boot image but forgot to pull rom over.
so had various issues getting over in the end had to mess around with recoverys and totally wipe my sd for it to be recognized.
so i solved all this then..now the issue is..of everything i push over..only one rom boots up and installs fine..and that is a cm9 test without sd mounting..so it solves nothing.
any ideas of how to get a rom on there where i can mount the sd..download a rom and put it on..
ill be honest..htc+internal sd card=not happy
ive pushed leedroids..virtuous..utbs rom but nothing.
i tried aokp but it didnt even push.
with these also some get corrupted by a protocol failure..
many questions. currently has cm9 on..but no mounting..so great
Did you already try a factory reset after flashing the stock recovery (e.g. from MoDaCo)?
-
Hi rootrider, yeah i followed a post i found..
basically i used the one click toolkit to flash the stock recovery..then cleared storage and all data etc.then installed clockwork back..it doesnt like the working roms though
cm9 is the only one i can boot up..at least it sees the sd card again in clockwork though
Had your problem as well... I don't remember exactly what I did to get out among many other things (sh..).
Had some trouble as well flashing stock recovery with the one click tool kit. It didn't work as expected. So I did it with adb. Just keep on trying, there is a way out.
-
My next course of action is, to flash the stock recovery, clear everything,reinstall clockwork then install aokp..if its something with the type of rom.maybe that will work..i can mount..get a rom on the sd and resume business as usual..
debatebale whether itll work lol
If this doesn't help get Thor's hammer and flash your appropriate RUU (again).
Easiest method would be to run an RUU and start over again. I see your vodafone UK so try this one
http://dl.dropbox.com/u/69014495/RU..._2_10.23.31501S.10L_release_258386_signed.exe
It also includes the new radio too !
Just relock bootloader before running it, After its finished unlock and fastboot flash cwm..
easy peasy !!
--
thanks people, im running leedroids rom now, seemed my issue was is after pushing the file over i just tried to install immediatley..after a couple of reboots just for the hell of it,untouchables rom started installing...phew..
sadly all my sd contents have gone..very dissapointed with the sd card business!
still least its working again!
thankfully azzle didnt need to go back to ruu
Aye, captain. Glad to read this.